| author | Michael Krelin <hacker@klever.net> | 2004-07-05 01:53:09 (UTC) |
|---|---|---|
| committer | Michael Krelin <hacker@klever.net> | 2004-07-05 01:53:09 (UTC) |
| commit | 885f8cc426a8840ae61023b75f3f0e4a1e268082 (patch) (side-by-side diff) | |
| tree | 5e942d450c97ca0bf0f9cfb80aa0fefb486535d9 /shared-code/ms_icmp.h | |
| download | kinsole-885f8cc426a8840ae61023b75f3f0e4a1e268082.zip kinsole-885f8cc426a8840ae61023b75f3f0e4a1e268082.tar.gz kinsole-885f8cc426a8840ae61023b75f3f0e4a1e268082.tar.bz2 | |
initial commit into svn repository
git-svn-id: http://svn.klever.net/kin/kinsole/trunk@1 fe716a7a-6dde-0310-88d9-d003556173a8
| -rw-r--r-- | shared-code/ms_icmp.h | 77 |
1 files changed, 77 insertions, 0 deletions
diff --git a/shared-code/ms_icmp.h b/shared-code/ms_icmp.h new file mode 100644 index 0000000..32d97f5 --- a/dev/null +++ b/shared-code/ms_icmp.h @@ -0,0 +1,77 @@ +/*------------------------------------------------------------------
+* Filename: MS_ICMP.H
+*
+* Description: Prototypes of Microsoft's ICMP.DLL functions for
+* access to Internet Control Message Protocol (their stacks do
+* not support the standard Berkeley Sockets raw socket API).
+* Use this to do "ping" or "traceroute," although beware that
+* Microsoft discourages its use.
+*/
+
+
+/* Note 2: For the most part, you can refer to RFC 791 for detials on
+* how to fill in values for the IP option information structure. */
+typedef struct ip_option_information {
+ u_char Ttl; /* Time To Live (used for traceroute) */
+ u_char Tos; /* Type Of Service (usually 0) */
+ u_char Flags; /* IP header flags (usually 0) */
+ u_char OptionsSize; /* Size of options data (usually 0, max 40) */
+ u_char FAR *OptionsData;/* Options data buffer */
+} IPINFO, *PIPINFO, FAR *LPIPINFO;
+
+/* Note 1: The Reply Buffer will have an array of ICMP_ECHO_REPLY
+* structures, followed by options and the data in ICMP echo reply
+* datagram received. You must have room for at least one ICMP
+* echo reply structure, plus 8 bytes for an ICMP header. */
+typedef struct icmp_echo_reply {
+ u_long Address; /* source address */
+ u_long Status; /* IP status value (see below) */
+ u_long RTTime; /* Round Trip Time in milliseconds */
+ u_short DataSize; /* reply data size */
+ u_short Reserved; /* */
+ void FAR *Data; /* reply data buffer */
+ typedef struct ip_option_information Options; /* reply options */
+} ICMPECHO, *PICMPECHO, FAR *LPICMPECHO;
+
+#define IP_STATUS_BASE 11000
+#define IP_SUCCESS 0
+#define IP_BUF_TOO_SMALL (IP_STATUS_BASE + 1)
+#define IP_DEST_NET_UNREACHABLE (IP_STATUS_BASE + 2)
+#define IP_DEST_HOST_UNREACHABLE (IP_STATUS_BASE + 3)
+#define IP_DEST_PROT_UNREACHABLE (IP_STATUS_BASE + 4)
+#define IP_DEST_PORT_UNREACHABLE (IP_STATUS_BASE + 5)
+#define IP_NO_RESOURCES (IP_STATUS_BASE + 6)
+#define IP_BAD_OPTION (IP_STATUS_BASE + 7)
+#define IP_HW_ERROR (IP_STATUS_BASE + 8)
+#define IP_PACKET_TOO_BIG (IP_STATUS_BASE + 9)
+#define IP_REQ_TIMED_OUT (IP_STATUS_BASE + 10)
+#define IP_BAD_REQ (IP_STATUS_BASE + 11)
+#define IP_BAD_ROUTE (IP_STATUS_BASE + 12)
+#define IP_TTL_EXPIRED_TRANSIT (IP_STATUS_BASE + 13)
+#define IP_TTL_EXPIRED_REASSEM (IP_STATUS_BASE + 14)
+#define IP_PARAM_PROBLEM (IP_STATUS_BASE + 15)
+#define IP_SOURCE_QUENCH (IP_STATUS_BASE + 16)
+#define IP_OPTION_TOO_BIG (IP_STATUS_BASE + 17)
+#define IP_BAD_DESTINATION (IP_STATUS_BASE + 18)
+#define IP_ADDR_DELETED (IP_STATUS_BASE + 19)
+#define IP_SPEC_MTU_CHANGE (IP_STATUS_BASE + 20)
+#define IP_MTU_CHANGE (IP_STATUS_BASE + 21)
+#define IP_UNLOAD (IP_STATUS_BASE + 22)
+#define IP_GENERAL_FAILURE (IP_STATUS_BASE + 50)
+#define MAX_IP_STATUS IP_GENERAL_FAILURE
+#define IP_PENDING (IP_STATUS_BASE + 255)
+
+
+HANDLE WINAPI PASCAL IcmpCreateFile(VOID); /* INVALID_HANDLE_VALUE on error */
+BOOL WINAPI PASCAL IcmpCloseHandle(HANDLE IcmpHandle); /* FALSE on error */
+DWORD WINAPI PASCAL IcmpSendEcho(
+ HANDLE IcmpHandle, /* handle returned from IcmpCreateFile() */
+ u_long DestAddress, /* destination IP address (in network order) */
+ LPVOID RequestData, /* pointer to buffer to send */
+ WORD RequestSize, /* length of data in buffer */
+ LPIPINFO RequestOptns, /* see Note 2 below */
+ LPVOID ReplyBuffer, /* see Note 1 below */
+ DWORD ReplySize, /* length of reply (must allow at least 1 reply) */
+ DWORD Timeout /* time in milliseconds to wait for reply */
+);
+
|