reworked carriage.

Begin not an engineer, but developer I couldn't stand the code. Though
I also started to resolve some engineering issues and being developer and
not an engineer, I didn't do that well, but that's a start…

1 files changed, 0 insertions, 144 deletions

diff --git a/X-Axis_carridge2.scad b/X-Axis_carridge2.scad
deleted file mode 100644
index d7285b9..0000000
--- a/X-Axis_carridge2.scad
+++ b/dev/null
@@ -1,144 +0,0 @@
-part="mount"; //mount or carridge
-
-// LM8UU dimentions
-LM8UU_length = 25;
-LM8UU_diameter = 15;
-
-// X Axis dimensions
-x_rod_spacing = 45;
-x_rod_radius = 4;
-
-//Belt
-belt_thickness_no_tooth = 0.75;
-belt_thickness_tooth = 1.45;
-belt_double = belt_thickness_no_tooth+belt_thickness_tooth+0.5;
-
-//Carriage
-carriage_width = 30;
-carriage_padding = 0.1;
-carriage_height = x_rod_spacing+LM8UU_diameter+carriage_padding*2;
-carriage_depth = 12;
-
-//cyclops
-heatbreak_x1=6;
-heatbreak_x2=24;
-heatbreak_z1=3;
-heatbreak_z2=11;
-heatbreak_diameter=4;
-heatsink_baseline=carriage_padding*2+LM8UU_diameter-1;
-mount_x1=15;
-mount_z1=10;
-mount_x2=10.5;
-mount_z2=20;
-mount_x3=19.5;
-mount_z3=20;
-mount_diameter=3.8;
-
-module tie(){
-    difference(){
-        rotate([0,90,0]) cylinder(d=LM8UU_diameter+10, h=4, $fn=50);
-        rotate([0,90,0]) cylinder(d=LM8UU_diameter+3, h=4, $fn=50);
-    }
-}
-
-module heatbreak_hole(){
-    rotate([-90,0,0]) cylinder(d=heatbreak_diameter, h=carriage_depth*2+10, $fn=50);
-    //translate([0,-4,0]) rotate([-90,0,0]) cylinder(d=heatbreak_diameter+3, h=carriage_depth+2, $fn=100);
-}
-
-module mount_hole(){
-    rotate([-90,0,0]) cylinder(d=mount_diameter, h=carriage_depth*2+10, $fn=50);
-    if (part=="carridge") translate([0,-4,0]) rotate([-90,0,0]) cylinder(d=mount_diameter+3, h=carriage_depth+2, $fn=50);
-}
-
-module lug_hole(){
-    rotate([-90,0,0]) cylinder(d=4, h=carriage_depth+2, $fn=50);
-    //translate([0,0,-2]) rotate([-90,0,0]) cylinder(d=5, h=carriage_depth+2, $fn=100);
-}
-
-
-difference(){
-    if (part=="carridge") {
-        //back plane
-        cube(size=[carriage_width,carriage_depth,carriage_height+1]);
-    }
-    else if (part=="mount") {
-        local_height = x_rod_spacing-LM8UU_diameter-carriage_padding*2-3;
-        translate([0,8,LM8UU_diameter+carriage_padding*2]) 
-            cube(size=[carriage_width,8,local_height]);
-    }
-    
-    if (part=="carridge"){
-    //LM8UU
-    translate([2.5,0,carriage_padding+LM8UU_diameter/2]) rotate([0,90,0]) cylinder(d=LM8UU_diameter, h=LM8UU_length, $fn=50);
-    translate([2.5,0,carriage_height-carriage_padding-LM8UU_diameter/2]) rotate([0,90,0]) cylinder(d=LM8UU_diameter, h=LM8UU_length, $fn=50);
-    
-    //ties
-    translate([8,0,carriage_padding+LM8UU_diameter/2]) tie();
-    translate([carriage_width-12,0,carriage_padding+LM8UU_diameter/2]) tie();
-    translate([6,0,carriage_height-carriage_padding-LM8UU_diameter/2]) tie();
-    translate([carriage_width-10,0,carriage_height-carriage_padding-LM8UU_diameter/2]) tie();
-    
-    translate([8,-1,-1]) cube(size=[4,LM8UU_diameter/2,3]);
-    translate([carriage_width-12,-1,-1]) cube(size=[4,LM8UU_diameter/2,3]);
-    
-    //translate([8,LM8UU_diameter/2-.01,LM8UU_diameter/8]) cube(size=[3,carriage_depth,LM8UU_diameter/3*2+1]);
-   // translate([carriage_width-11,LM8UU_diameter/2-.01,LM8UU_diameter/8]) cube(size=[3,carriage_depth,LM8UU_diameter/3*2+1]);
-    
-    //rods
-    translate([-1,0,carriage_padding+x_rod_radius+3.5]) rotate([0,90,0]) cylinder(r=x_rod_radius+2, h=carriage_width+2, $fn=50);
-    translate([-1,0,carriage_height-x_rod_radius-3.5-carriage_padding]) rotate([0,90,0]) cylinder(r=x_rod_radius+2, h=carriage_width+2, $fn=50);
-    
-    //belt
-    translate([-1,-1,LM8UU_diameter+carriage_padding*2+1]) difference(){
-        local_height = x_rod_spacing-LM8UU_diameter-carriage_padding*2-5;
-        cube(size=[carriage_width+2,8,local_height]);
-        
-        //posts
-        translate([3,-1,12.5]) lug_hole();
-        translate([29,-1,12.5]) lug_hole();
-        //channels
-        translate([0,0,carriage_padding*2]){
-            difference() {
-                union() {
-                    translate([1,-1,local_height-belt_double-5]) cube(size=[4,10,5]);
-                    translate([27,-1,local_height-belt_double-5]) cube(size=[4,10,5]);
-                
-                    translate([5,0,local_height-belt_double-2.5]) rotate([-90,0,0]) cylinder(d=5,h=100,$fn=50);
-                    translate([27,0,local_height-belt_double-2.5]) rotate([-90,0,0]) cylinder(d=5,h=100,$fn=50);
-                }
-                translate([5,0,local_height-belt_double-2.5]) rotate([-90,0,0]) cylinder(d=3.5,h=100,$fn=50);
-                translate([27,0,local_height-belt_double-2.5]) rotate([-90,0,0]) cylinder(d=3.5,h=100,$fn=50);
-            }
-        }
-    }
-    }
-   
-    //Cyclops heatbreak 
-    translate([heatbreak_x1,-1,heatbreak_z1+heatsink_baseline]) heatbreak_hole();
-    translate([heatbreak_x2,-1,heatbreak_z1+heatsink_baseline]) heatbreak_hole();
-    translate([heatbreak_x1,-1,heatbreak_z2+heatsink_baseline]) heatbreak_hole();
-    translate([heatbreak_x2,-1,heatbreak_z2+heatsink_baseline]) heatbreak_hole();
-    
-    //Cyclops mount
-    translate([mount_x1,-1,mount_z1+heatsink_baseline]) mount_hole();
-    translate([mount_x2,-1,mount_z2+heatsink_baseline]) mount_hole();
-    translate([mount_x3,-1,mount_z3+heatsink_baseline]) mount_hole();
-     
-    //cooling
-    if (part=="mount") translate([0.001,7,LM8UU_diameter+carriage_padding*2-1]){
-        local_height = x_rod_spacing-LM8UU_diameter-carriage_padding*2+2;
-        translate([2,0,0]) cube(size=[2,3,local_height]);
-        translate([6,0,0]) cube(size=[2,3,local_height]);
-        translate([10,0,0]) cube(size=[2,3,local_height]);
-        translate([14,0,0]) cube(size=[2,3,local_height]);
-        translate([18,0,0]) cube(size=[2,3,local_height]);
-        translate([22,0,0]) cube(size=[2,3,local_height]);
-        translate([26,0,0]) cube(size=[2,3,local_height]);
-    }
-    
-    
-    //translate([-1,LM8UU_diameter/2+1,-1]) cube(size=[carriage_width+2,carriage_depth-LM8UU_diameter/2+1,LM8UU_diameter]);
-}
-
-