summaryrefslogtreecommitdiff
path: root/x-carriage-adapter.scad
authorMichael Krelin <hacker@klever.net>2016-07-15 12:42:42 (UTC)
committer Michael Krelin <hacker@klever.net>2016-07-15 12:42:42 (UTC)
commit51baec4999807653e4d80085ec541cdc60b27468 (patch) (side-by-side diff)
treec28fa8069a9ab856c994cd40fbcdedca43a62a21 /x-carriage-adapter.scad
parent7fdbf9d3267810cd4a92fd02bf899ae739bd2a2f (diff)
downloadcarriagery-51baec4999807653e4d80085ec541cdc60b27468.zip
carriagery-51baec4999807653e4d80085ec541cdc60b27468.tar.gz
carriagery-51baec4999807653e4d80085ec541cdc60b27468.tar.bz2
initial implementation
Diffstat (limited to 'x-carriage-adapter.scad') (more/less context) (show whitespace changes)
-rw-r--r--x-carriage-adapter.scad145
1 files changed, 145 insertions, 0 deletions
diff --git a/x-carriage-adapter.scad b/x-carriage-adapter.scad
new file mode 100644
index 0000000..af91d52
--- a/dev/null
+++ b/x-carriage-adapter.scad
@@ -0,0 +1,145 @@
+screw_tolerance=0.1; slide_tolerance=.3; play_tolerance=.8;
+draft=true;
+use <e3dchimera.scad>;
+
+assembly_height = 49.5; // the height of e3d chimera assembly in e3dchimera.scad
+hs_nozzles_from_back = 6; // the distance from nozzles from the back of the heatsink
+hs_size = [30,18,30]; // the heatsink size
+mounting_holes_from_top = [ // the offsets of mounting holes on the back
+ [0, 20], [-4.5,10], [4.5,10]
+];
+mounting_holes_on_top = [ // the offsets of mounting holes on the top
+ [0,-3], [-17/2,9], [17/2,9]
+];
+feeds_apart = 18; // the distance between nozzles (and, therefore filament feeds)
+
+feed_shell_d = 17; // the shell diameter around filament feed, pushfit's diameter
+screw_shell_d = 8; // the shell diameter around screws
+thread_h = 10.5; // the height of the pushfit's thread
+hinge_s = 6; // hinges thickness
+
+screwhead_d = 5.5; // the diameter of the screw head
+screwhead_h = 3; // the height of the screw head
+
+ms_size = [19.8,6,10]; // microswitch dimensions
+ms_screws_apart = 9.5; // distance between microswitch mounting screws
+ms_switch_offset = 2.5; // the offset of the switch from the center
+ms_bump = ms_size[1]; // how far from hinge microswitch is mounted
+
+lower_by = 15; // lower hotend from the original intention by this long
+gap = 5; // gap between microswitch and heatsink
+
+ps_offset = 3+3; // pushscrew offset from the hinge
+
+back_thickness = 8; // thickness of the part behind the hinge
+nut_thickness = 2.5; // intelligent guess should suffice
+nut_width = 5.5; // intelligent guess should suffice
+
+use <threads.scad>;
+/* the internal thread for e3d bowden coupling: http://e3d-online.com/E3D-v6/Spares/Threaded-Bowden-Coupling-1.75mm-Filament */
+module pushfit_thread(h=thread_h) {
+ thr = 3/8 + .5/25.4;
+ slit = 25.4*thr/2 + 0.4;
+ translate([0,0,-1]) if(draft) cylinder(d=thr*25.4,h=h+2);
+ else english_thread(diameter=thr,threads_per_inch=28,length=(h+2)/25.4,internal=true);
+ translate([-2,-slit,-1]) cube([4,slit,h+2]);
+}
+
+
+sff = hs_nozzles_from_back+gap; // switch from feeds
+hff = sff+ms_size[1]+ms_bump+thread_h/2; // hinges from feeds
+
+module holder() {
+ translate([0,0,0]) difference() {
+ union() {
+ hull() {
+ rs = 3; drs = screw_shell_d/2-rs;
+ rf = 6; drf = feed_shell_d/2-rf;
+ for(sx=[-1,1]) translate([sx*feeds_apart/2,0,0]) {
+ translate([0,0,drf])
+ cylinder(d=feed_shell_d,h=thread_h-drf,$fn=60);
+ cylinder(r=rf,h=thread_h,$fn=30);
+ }
+ for(mhot = mounting_holes_on_top) translate([mhot[0],mhot[1],0]) {
+ translate([0,0,drs])
+ cylinder(d=screw_shell_d,h=thread_h-drs,$fn=30);
+ cylinder(r=rs,h=thread_h,$fn=30);
+ }
+ }
+ hull() {
+ translate([0,0,thread_h/2]) cube(size=[hs_size[0]-2*hinge_s-2*slide_tolerance,feed_shell_d,thread_h],center=true);
+ translate([0,-hff,thread_h/2])
+ rotate([0,90,0])
+ cylinder(d=thread_h,h=hs_size[0]-2*hinge_s-2*slide_tolerance,center=true,$fn=60);
+ }
+ }//union
+ for(sx=[-1,1]) translate([sx*feeds_apart/2,0,0])
+ pushfit_thread();
+ for(mhot = mounting_holes_on_top) translate([mhot[0],mhot[1],0]) {
+ translate([0,0,-1]) cylinder(d=3,h=thread_h+2,$fn=12); // TODO: sink heads
+ translate([0,0,thread_h/2]) cylinder(d=screwhead_d+slide_tolerance,h=thread_h/2+1,$fn=30);
+ }
+ // hinge
+ translate([0,-hff,thread_h/2])
+ rotate([0,90,0]) cylinder(d=3+slide_tolerance,h=hs_size[0],center=true,$fn=12);
+ // push screw
+ hull() for(oy=[-1,1]) translate([0,-hff+ps_offset+oy,-1]) cylinder(d=3+play_tolerance,h=thread_h+2,$fn=30);
+ // tune screw
+ translate([0,-sff-ms_size[1]/2,-1]) cylinder(d=3,h=thread_h+2);
+ }//difference
+}
+
+
+module base() {
+ us = 2*ms_size[2];
+ translate([0,-hff,0]) difference() {
+ union() {
+ for(sx=[-1,1]) translate([sx*(hs_size[0]-hinge_s)/2,0,0]) hull() {
+ translate([0,0,thread_h/2])
+ rotate([0,90,0]) cylinder(d=thread_h,h=hinge_s,center=true,$fn=60);
+ cube(size=[hinge_s,thread_h,thread_h],center=true);
+ translate([-hinge_s/2,0,-1]) mirror([0,1,0]) cube(size=[hinge_s,thread_h/2+back_thickness,thread_h+1]);
+ } // hull for
+ hull() {
+ translate([0,0,-us/2-slide_tolerance]) cube(size=[hs_size[0],thread_h+1,us],center=true);
+ for(sx=[-1,1]) translate([sx*(hs_size[0]/2-ms_bump),thread_h/2,-us-slide_tolerance])
+ cylinder(r=ms_bump,h=us+slide_tolerance,$fn=30);
+ }
+ translate([-hs_size[0]/2,-thread_h/2-slide_tolerance,-us-slide_tolerance])
+ mirror([0,1,0]) cube(size=[hs_size[0],back_thickness,us+slide_tolerance+thread_h]);
+ } // union
+ translate([0,0,thread_h/2])
+ rotate([0,90,0]) cylinder(d=3+screw_tolerance,h=hs_size[0]+2,center=true,$fn=12);
+ for(smx=[0,1]) mirror([smx,0,0])
+ translate([hs_size[0]/2+1,0,thread_h/2]) rotate([0,-90,0]) cylinder(d=screwhead_d+slide_tolerance,h=screwhead_h+1,$fn=30);
+ /* changed my mind; for(srx=[-1,1]) rotate([srx*15,0,0])
+ translate([0,0,thread_h/2-slide_tolerance])
+ cube(size=[hs_size[0]-2*hinge_s,thread_h*sqrt(2)+2,thread_h],center=true); */
+ // switch mount
+ for(sx=[-1,1]) translate([sx*ms_screws_apart/2+ms_switch_offset,thread_h/2,-ms_size[2]])
+ rotate([90,0,0])
+ cylinder(d=2.5,h=ms_size[1]*2,center=true,$fn=12);
+ // thing mount
+ translate([0,-thread_h/2-back_thickness,lower_by])
+ for(mhft = mounting_holes_from_top) translate([mhft[0],0,-mhft[1]]) {
+ rotate([-90,0,0])
+ translate([0,0,-1])
+ cylinder(d=3,h=back_thickness+1);
+ translate([0,back_thickness/2,0])
+ cube(size=[2*hs_size[0],nut_thickness+slide_tolerance,nut_width+slide_tolerance],center=true);
+ } // translate for
+ mirror([0,0,1]) translate([0,ps_offset,-1]) cylinder(d=3,h=hs_size[2]+1);
+ } // difference
+}
+
+view="*";
+
+if(view=="holder") {
+ holder();
+}else if(view=="base") {
+ base();
+}else {
+ % translate([0,0,-assembly_height]) chimera_assembly();
+ color("lightgreen",0.7) holder();
+ color("darkgreen",0.7) base();
+}