author | Michael Krelin <hacker@klever.net> | 2018-07-31 19:31:02 (UTC) |
---|---|---|
committer | Michael Krelin <hacker@klever.net> | 2018-07-31 19:31:02 (UTC) |
commit | da262d91847673cd90269f164fc8ca5081333e3b (patch) (side-by-side diff) | |
tree | 501351128b51c8d62e4c455fcd78eec31dca92f3 | |
parent | 703ec3a28bbc55c4d758d4dd8e8e03df27fb777d (diff) | |
download | extrudery-da262d91847673cd90269f164fc8ca5081333e3b.zip extrudery-da262d91847673cd90269f164fc8ca5081333e3b.tar.gz extrudery-da262d91847673cd90269f164fc8ca5081333e3b.tar.bz2 |
mixer: some parameters comments
-rw-r--r-- | mixer.scad | 4 |
1 files changed, 2 insertions, 2 deletions
@@ -7,34 +7,34 @@ draft=true; use <threads.scad>; module pushfit_thread(h=10) { thr = 3/8 + .5/25.4; slit = 25.4*thr/2 + 0.2; if(draft) cylinder(d=thr*25.4,h=h); else english_thread(diameter=thr,threads_per_inch=28,length=h/25.4,internal=true); translate([-2,-slit,0]) cube([4,2*slit,h]); } module the_mixer( pushfit_d = 10, pushfit_h = 10, pushfit_id = 6, pushfit_type = "threaded", // threaded|embedded|embeddest pushfit_ring_h = 4.7, // height of embedded pushfit ring pushfit_insert_d = 8, // diameter of pushfit insert legs hole pushfit_legspace_h = 3.2, // the height of legspace for embeddest variant - pushfit_inlet_ch = 1, - liner_d = 4, liner_id = 2, + pushfit_inlet_ch = 1, // inlet chamfer + liner_d = 4, liner_id = 2, // ptfe liner inner and outer diameters filament_d = 1.75, join_angle = 30, interpushfit = 2*extrusion_width, // space between two pushfit holes pushfit_s = 2, // shell around pushfit holes output_l = 4, // length of output after before pushfit outer_r = 3, // outer radius liner_d_tolerance = .2, ) { fnd = PI*2*2; fnr = fnd*2; module liner(l,in) { inh=ld-liner_id; union() { translate([0,0,inh]) cylinder(d=ld,h=l-inh,$fn=ld*fnd); |