adjust spring tensioner hand cutout

1 files changed, 2 insertions, 2 deletions

diff --git a/another.scad b/another.scad
index 83a4e43..4842e1b 100644
--- a/another.scad
+++ b/another.scad
@@ -340,50 +340,50 @@ module the_extruder(
    translate([0,0,ls_z]) difference() {
     rotate([0,0,-180+a0])
     rotate_extrude(angle=a1-a0)
     translate([0,-ls_h/2])
     square([sqrt(pow(gearbox_d/2,2)+pow(longwing-lever_thickness/2,2))+1,
            ls_h]);
     translate([-mount_d/2,0,0])
     cylinder(d=gearbox_d-mount_d,h=ls_h+2,center=true,$fn=fnd*(gearbox_d-mount_d));
    }//difference translate
    
    // spring tensioner
    translate([-gearbox_d/2,-longwing,ls_z]) rotate([0,-90,0]) {
     mirror([0,0,1]) {
      translate([0,0,st_thickshell])
      hull() for(o=[0,spring_d]) translate([0,-o,0])
      rotate([0,0,30])
      cylinder(d=st_nut_d+st_nut_d_tolerance,h=st_nut_h+st_nut_h_tolerance,$fn=6);
      translate([0,0,-1]) cylinder(d=st_screw_d+st_screw_d_tolerance,h=fsw+2,$fn=fnd*(st_screw_d+st_screw_d_tolerance));
      bigd = spring_d+spring_d_clearance;
      hf = (bigd-st_screw_d-st_screw_d_tolerance)/2;
      translate([0,0,st_thickshell+st_nut_h+st_nut_h_tolerance+st_thinshell-epsilon]) {
       cylinder(d1=st_screw_d+st_screw_d_tolerance,d2=bigd,
        h=hf+epsilon, $fn=fnd*bigd);
       translate([0,-(st_split_w+st_split_w_tolerance)/2,0]) hull() {
-       cube(size=[body_h-ls_z-sp_ch-st_split_w_tolerance,st_split_w+st_split_w_tolerance,fsw+1]);
-       translate([0,0,sp_ch+st_split_w_tolerance+1])
+       cube(size=[body_h-ls_z-st_w+st_split_w_tolerance,st_split_w+st_split_w_tolerance,fsw+1]);
+       translate([0,0,st_w+1])
        cube(size=[body_h-ls_z+1,st_split_w+st_split_w_tolerance,fsw+1]);
       }
      }//translate
      translate([0,0,st_thickshell+st_nut_h+st_nut_h_tolerance+st_thinshell+hf-epsilon])
      cylinder(d=bigd,h=fsw+1,$fn=fnd*bigd);
     }//mirror
    }//translate
 
    // label
    body_label();
    // scale
    body_scale();
 
   }//difference
 
  }//body module
  module body_scale() {
   scale_thickness = 2*layer_height;
   nscales = 5;
   x1 = -gearbox_d/2+fsw-st_h+st_w+st_bump*2-st_bump_tip/2;
   x0 = -gearbox_d/2+st_thickshell+st_nut_h+st_nut_h_tolerance+st_thinshell+st_split_w+st_split_w_tolerance+st_bump_tip/2;
   w0 = st_split_w+st_split_w_tolerance+2*(extrusion_width+2*extrusion_width);
   w1 = 2*(longwing-gearbox_d/2-extrusion_width);
   translate([0,-longwing,body_h-scale_thickness])