label engraving wip

1 files changed, 12 insertions, 1 deletions

diff --git a/another.scad b/another.scad
index bb67dea..297c1fc 100644
--- a/another.scad
+++ b/another.scad
@@ -51,49 +51,50 @@ module the_extruder(
  // empty spaces
  idler_travel = 3,				// how far should idler travel when pressed
  idler_clearance=1,
  pulley_d_clearance=2,
  pulley_small_d_clearance=0.5,
  lever_v_clearance=.7,				// vertical clearance for the lever
  spring_d_clearance=1,
  protrusion_tolerance_h=.5,			// horizontal tolerance for the motor protrusion
  protrusion_tolerance_v=.5,			// vertical tolerance for the motor protrusion
  mount_screw_d_tolerance=.4,
  idler_v_tolerance=.5,
  knob_bore_d_tolerance=.6,
  st_nut_h_tolerance=.2,
  st_nut_d_tolerance=.2,/* TODO: make it st_nut_w_tolerance */
  st_screw_d_tolerance=.5,
  st_split_w_tolerance = .3,
 
  min_z_shell = 4*layer_height,                  // the very minimal shell thickness along z-axis.
  min_xy_shell = 2*extrusion_width,
 
  what="lever",  // lever|body|knob|springpad|*
  left=false,
  vitamins = true,
  bridges = true,
- debug = false
+ debug = false,
+ label = "another"
 ) {
  fnd = 2*PI; fnr = 2*fnd;
 
  idler_filament_offset = filament_path_d/2; // -filament_offset;
  lever_shell = mount_screwhead_h+0.5;
  lever_thickness=max(spring_d+spring_d_clearance+layer_height*8,idler_h+idler_v_tolerance+2*lever_shell);
  lsd = idler_d-idler_clearance*2; // the diameter of lever thingie
  longwing=(mount_d+mount_screw_d+mount_screw_d_tolerance+spring_d+spring_d_clearance)/2+min_xy_shell;
  shortwing = let(a=mount_d/2,c=(pulley_d+idler_d)/2/sqrt(2))
              sqrt(c*c+pow(a-c,2));
  longwing_travel = idler_travel*longwing/shortwing;
  h_ = (pulley_d+idler_d)/(2*sqrt(2));
  ri = sqrt( pow(h_,2) + pow(mount_d/2-h_,2) );
  spring_dl = idler_travel*longwing/ri;
  // finger and spring support
  fsw = gearbox_d-(gearbox_d-mount_d)/2-max(spring_lc,longwing_travel+(gearbox_d-mount_d)/2);
 
  mount_min_depth = mounthole_min_depth ? mounthole_min_depth : mounthole_depth-1;
  mount_max_depth = mounthole_max_depth ? mounthole_max_depth : mounthole_depth+1;
  filament_elevation=protrusion_h+pulley_elevation+teeth_elevation;
  ls_z = filament_elevation; // leverspace mid-z
  ls_h = lever_thickness+lever_v_clearance; // leverspace height
  mount_depth = mount_screw_l - (ls_z+ls_h/2+min_z_shell);
  body_h = max(protrusion_h+bore_l,mount_screw_l-mount_depth+mount_screwhead_h+min_z_shell,ls_z*2);
@@ -347,48 +348,58 @@ module the_extruder(
     cylinder(d=gearbox_d-mount_d,h=ls_h+2,center=true,$fn=fnd*(gearbox_d-mount_d));
    }//difference translate
    
    // spring tensioner
    translate([-gearbox_d/2,-longwing,ls_z]) rotate([0,-90,0]) {
     mirror([0,0,1]) {
      translate([0,0,st_thickshell])
      hull() for(o=[0,spring_d]) translate([0,-o,0])
      rotate([0,0,30])
      cylinder(d=st_nut_d+st_nut_d_tolerance,h=st_nut_h+st_nut_h_tolerance,$fn=6);
      translate([0,0,-1]) cylinder(d=st_screw_d+st_screw_d_tolerance,h=fsw+2,$fn=fnd*(st_screw_d+st_screw_d_tolerance));
      bigd = spring_d+spring_d_clearance;
      hf = (bigd-st_screw_d-st_screw_d_tolerance)/2;
      translate([0,0,st_thickshell+st_nut_h+st_nut_h_tolerance+st_thinshell-epsilon]) {
       cylinder(d1=st_screw_d+st_screw_d_tolerance,d2=bigd,
        h=hf+epsilon, $fn=fnd*bigd);
       translate([0,-(st_thinshell+st_split_w_tolerance)/2,0])
       cube(size=[body_h-ls_z+1,st_thinshell+st_split_w_tolerance,fsw+1]);
      }//translate
      translate([0,0,st_thickshell+st_nut_h+st_nut_h_tolerance+st_thinshell+hf-epsilon])
      cylinder(d=bigd,h=fsw+1,$fn=fnd*bigd);
     }//mirror
    }//translate
 
+   // label
+   label_thickness = 2*layer_height;
+   label_len = len(label);
+   labelspace = [gearbox_d/2-mount_screwhead_d/2-min_xy_shell,longwing-(mount_screwhead_d-st_thinshell-st_split_w_tolerance)/2-2*min_xy_shell-mount_d/2];
+   translate([0,0,body_h-label_thickness])
+   linear_extrude(height=label_thickness+epsilon,convexity=64)
+   translate([-mount_screwhead_d/2-min_xy_shell-labelspace.x/2,-longwing+(st_thinshell+st_split_w_tolerance)/2+min_xy_shell+labelspace.y/2])
+   mirror([left?0:1,0])
+   text(text=label,size=labelspace.x/label_len,halign="center",valign="center",font="Arial Black");
+
   }//difference
 
  }//body module
 
  module springpad() {
   smalld=st_screw_d+st_screw_d_tolerance+min_xy_shell;
   bigd = spring_d+spring_d_clearance/2;
   hf = (bigd-smalld)/2;
   h = hf*3.5;
   translate([-gearbox_d/2+st_thickshell+st_nut_h+st_nut_h_tolerance+st_thinshell+1,-longwing,filament_elevation])
   rotate([0,90,0]) difference() {
    union() {
     cylinder(d1=smalld,d2=bigd,h=hf,$fn=fnd*bigd);
     translate([0,0,hf-epsilon])
     cylinder(d=bigd,h=h-hf,$fn=fnd*bigd);
     translate([0,0,h])
     sphere(d=spring_d*3/4,$fn=fnd*spring_d*3/4);
     l = body_h-ls_z;
     w = st_thinshell;
     hull() translate([0,-st_thinshell/2,0]) mirror([1,0,0]) {
      translate([0,0,w])
      cube(size=[l,st_thinshell,w]);
      cube(size=[l-w,st_thinshell,2*w]);
     }