Revert "increase default bore_d tolerance"

This reverts commit 183ac2d4948c69d97b5491dcf83fb238d53ac121.

1 files changed, 1 insertions, 1 deletions

diff --git a/another.scad b/another.scad
index f3305a1..a25e047 100644
--- a/another.scad
+++ b/another.scad
@@ -12,97 +12,97 @@ module the_extruder(
  gearbox_d = 36,
          mount_d = 28,                          // the distance between opposite mounting holes
  mounthole_depth = 5,
  mounthole_min_depth = 3, mounthole_max_depth = 4,
          protrusion_d = 22, protrusion_h = 2.2,         // the dimensions of the protrusion on top of gearbox
  bore_d = 8, bore_l = 17.6,
  bore_dd = 7,
  // pulley properties
  pulley = pulley_e3d,
          pulley_elevation = 1,                  // pulley elevation above the protrusion
  // idler properties
          idler_d = 10, idler_h = 4, idler_id = 3,// idler dimensions: outer and inner diameters and height
  // spring properties
          spring_d = 10, spring_lc = 9.6,        // spring diameter and compressed length
  // filament path properties
  filament_d = 1.75,
  filament_path_d = 2,
          filament_guide_d = 4,                  // PTFE filament guide diameter
  // knob properties
  knob_h = 10,
  knob_indent_d = 4,
  knob_indents = 12,
  knob_v_clearance = 1,
  // spring tensioner
  st_nut_d = 9, st_nut_h = 4,
  st_screw_d = 5, st_screw_l = 16,
  st_thickshell = 8*extrusion_width, st_thinshell = 2*extrusion_width,
  st_split_w = 4*extrusion_width,
 
  // screw it
  mount_screw_d = 3.1, mount_screw_l = 20,
  mount_screwhead_d=6, mount_screwhead_h=3,
  idler_screw_d = 3,
  idler_screwhead_d=6, idler_screwhead_h=3,
 
  pf = pushfit_metal,
  pf_shell = max(3*layer_height,3*extrusion_width),
 
  // empty spaces
          idler_travel = 1.75*2,                         // how far should idler travel when pressed
  idler_clearance=.5,
  pulley_small_d_clearance=.5,
          lever_v_clearance=.7,                  // vertical clearance for the lever
  spring_d_clearance=1,
          protrusion_tolerance_h=.5,             // horizontal tolerance for the motor protrusion
          protrusion_tolerance_v=.5,             // vertical tolerance for the motor protrusion
  mount_screw_d_tolerance=.4,
  idler_v_tolerance=.5,
- knob_bore_d_tolerance=.8,
+ knob_bore_d_tolerance=.6,
  st_nut_h_tolerance=.2,
  st_nut_d_tolerance=.2,/* TODO: make it st_nut_w_tolerance */
  st_screw_d_tolerance=.5,
  st_split_w_tolerance = .3,
 
  min_z_shell = 4*layer_height,                  // the very minimal shell thickness along z-axis.
  min_xy_shell = 2*extrusion_width,
 
  body_label = "another", body_label_thickness = layer_height,
  knob_label = "another", knob_label_thickness = 2*layer_height, knob_label_size=undef,
 
  what="lever",  // lever|body|knob|springpad|*
  left=false,
  vitamins = true,
  bridges = true,
  debug = false,
 ) {
  fnd = 2*PI; fnr = 2*fnd;
  function lu(m,k) = m[search([k],m)[0]][1];
 
  pulley_d = lu(pulley,"d");
  pulley_h = lu(pulley,"h");
  teeth_elevation = lu(pulley,"fe");
  filament_offset = lu(pulley,"g")+filament_d/2;
  pulley_d_clearance = lu(pulley,"ssrc")*2;
 
  sp_ch = st_split_w;
 
  idler_filament_offset = filament_path_d/2;
  lever_shell = mount_screwhead_h+0.5;
  lever_thickness=max(spring_d+spring_d_clearance+layer_height*8,idler_h+idler_v_tolerance+2*lever_shell);
  lsd = min(gearbox_d-mount_d,idler_d-idler_clearance*2); // the diameter of lever thingie
  longwing=(mount_d+mount_screw_d+mount_screw_d_tolerance+spring_d+spring_d_clearance)/2+min_xy_shell;
  shortwing = let(a=mount_d/2,c=(pulley_d+idler_d)/2/sqrt(2))
              sqrt(c*c+pow(a-c,2));
  longwing_travel = idler_travel*longwing/shortwing;
  h_ = (pulley_d+idler_d)/(2*sqrt(2));
  ri = sqrt( pow(h_,2) + pow(mount_d/2-h_,2) );
  spring_dl = idler_travel*longwing/ri;
  // finger and spring support width
  fsw = gearbox_d-(gearbox_d-mount_d)/2-max(spring_lc,longwing_travel+(gearbox_d-mount_d)/2);
 
  mount_min_depth = mounthole_min_depth ? mounthole_min_depth : mounthole_depth-1;
  mount_max_depth = mounthole_max_depth ? mounthole_max_depth : mounthole_depth+1;
  filament_elevation=protrusion_h+pulley_elevation+teeth_elevation;
  ls_z = filament_elevation; // leverspace mid-z
  ls_h = lever_thickness+lever_v_clearance; // leverspace height
  mount_depth = mount_screw_l - (ls_z+ls_h/2+min_z_shell);