multiswitch: customizer cutoff comment

1 files changed, 3 insertions, 1 deletions

diff --git a/multiswitch.scad b/multiswitch.scad
index 2b909a9..f58b7bd 100644
--- a/multiswitch.scad
+++ b/multiswitch.scad
@@ -12,97 +12,99 @@ module multiswitch(
  minshell = 2*extrusion_width,
  shell = 5*extrusion_width,
  pf = pushfit_embeddest,
 
  debug = 0,     // how many inputs -1 the debug cutout spans
  draft = draft,
  print = true,
 
  liner_d_tolerance=.2
 ) {
  fnd = 4*PI; fnr = 2*fnd;
  
  pushfit_d = pf_d(pf);
  pushfit_h = pf_h(pf);
  
  angular_step = 360/inputs;
  lod = liner_od+liner_d_tolerance; // effective liner diameter
  
  sinsin = sin(angle)*sin(angular_step/2);
  function l_to(d) = d*cos(asin(sinsin))/sinsin;
  l_output = lod;
  l_input = l_to((pushfit_d+minshell)/2);
  l_fork = l_to(liner_id/2);
  l_narrow = l_to(lod/2+minshell);
  
  module forinputs() {
   for(zr=[0:angular_step:359]) rotate([0,0,zr]) rotate([0,angle,0]) children();
  }//forinputs module
  module foroutput() {
   rotate([180,0,0]) children();
  }
  
  module laydown() {
   r = pushfit_d/2+shell;
   h_bottom = l_output+pushfit_h;
   /* The top point on the cylinder that will touch the bed */
   x0 = r*cos(angular_step/2);
   y0 = r*sin(angular_step/2);
   z0 = l_input+pushfit_h;
   /* The same point after rotation by "angle" around Y axis */
   x1 = z0*sin(angle)+x0*cos(angle);
   y1 = y0;
   z1 = z0*cos(angle)-x0*sin(angle);
   ax1 = atan(y1/x1);
   /* And its x-coordinate after final "angular_step/2" Z-rotation */
   ax2 = ax1-angular_step/2;
   x2 = x1*cos(ax2)/cos(ax1);
   laydown_angle = atan((x2-r)/(z1+h_bottom));
   rotate([90-laydown_angle,0,0])
    translate([0,r,h_bottom])
     rotate([0,0,angular_step/2-90])
      children();
  }
  module finalize() {
   if(print) laydown() children();
   else children();
  }
 
  finalize() difference() {
   hull() {
    forinputs()
     translate([0,0,l_input+pushfit_h]) mirror([0,0,1])
     cylinder(d=pushfit_d+shell*2,h=epsilon,$fn=pushfit_d*fnd);
    foroutput()
     translate([0,0,l_output+pushfit_h]) {
      cylinder(d=pushfit_d+shell*2,h=epsilon,$fn=pushfit_d*fnd);
     }
   }
   forinputs() {
    translate([0,0,l_input]) pushfit(pf,draft=draft);
    translate([0,0,l_narrow]) {
     cylinder(d=lod,h=l_input+1-l_narrow,$fn=lod*fnd);
     mirror([0,0,1]) translate([0,0,-epsilon])
     cylinder(d1=(liner_id+lod)/2,d2=liner_id,h=liner_id,$fn=lod*fnd);
    }
    cylinder(d=liner_id,h=l_input+epsilon,$fn=liner_id*fnd);
   }
   foroutput() {
    translate([0,0,l_output]) pushfit(pf,draft=draft);
    cylinder(d=lod,h=l_output+1,$fn=lod*fnd);
   }
   hull() {
    forinputs()
     translate([0,0,l_fork]) cylinder(d=liner_id,h=epsilon,$fn=liner_id*fnd);
    foroutput()
     cylinder(d=liner_id,h=epsilon,$fn=liner_id*fnd);
   }
   if(debug) {
    translate([0,0,-20/*TODO:*/])
    rotate_extrude(angle=angular_step*debug)
    square([50,100]/*TODO:*/);
   }
  }
 
 }
 
-multiswitch(debug=2,print=false);
+
+//CUSTOMIZERCUTOFF
+multiswitch(debug=1,print=false,inputs=2);