summaryrefslogtreecommitdiff
authorMichael Krelin <hacker@klever.net>2018-08-11 14:25:28 (UTC)
committer Michael Krelin <hacker@klever.net>2018-08-11 14:25:28 (UTC)
commit6ff4b3c2e76bbc6d37e933bcab7c47260785cab6 (patch) (side-by-side diff)
tree4b7b408a2e5039d320fae3e15d1bf1cc912dbc2a
parent495bcda94c4b32b13044cfa9e97c8ea25b32cdfb (diff)
downloadextrudery-6ff4b3c2e76bbc6d37e933bcab7c47260785cab6.zip
extrudery-6ff4b3c2e76bbc6d37e933bcab7c47260785cab6.tar.gz
extrudery-6ff4b3c2e76bbc6d37e933bcab7c47260785cab6.tar.bz2
adjusted filament path
it used to within the pulley, but now it's only half there
Diffstat (more/less context) (show whitespace changes)
-rw-r--r--another.scad12
1 files changed, 6 insertions, 6 deletions
diff --git a/another.scad b/another.scad
index 2ea5417..be0c887 100644
--- a/another.scad
+++ b/another.scad
@@ -120,7 +120,7 @@ module the_extruder(
cylinder(d=idler_screw_d,h=lever_thickness+2,center=true,$fn=30);
}//place idler
// filament path
- rotate([0,0,45]) translate([(pulley_d-filament_path_d)/2,0,0]) {
+ rotate([0,0,45]) translate([pulley_d/2,0,0]) {
rotate([90,0,0]) cylinder(d=filament_d,h=gearbox_d*2,center=true,$fn=15);
rotate([-90,0,0])
translate([0,0,mount_d/sqrt(2)/2+mount_screw_d])
@@ -151,15 +151,15 @@ module the_extruder(
// filament path
place_idler() {
- translate([-(idler_d+filament_path_d)/2,0,0]) rotate([90,0,0]) {
+ translate([-idler_d/2,0,0]) rotate([90,0,0]) {
cylinder(d=filament_path_d,h=3*gearbox_d,center=true,$fn=30);
translate([0,-filament_path_d/2/sqrt(2),0]) rotate([0,0,45])
cube(size=[filament_path_d/2,filament_path_d/2,3*gearbox_d],center=true);
}//rotate translate
- translate([-(idler_d+filament_path_d)/2,0,0])
+ translate([-idler_d/2,0,0])
rotate([90,0,0])
translate([0,0,
- sqrt(2)*(mount_d-pulley_d+filament_path_d+lsd)/2
+ sqrt(2)*(mount_d-pulley_d+lsd)/2
]) {
cylinder(d1=filament_path_d,d2=2*filament_path_d,
h=filament_path_d,$fn=2*filament_path_d*fnd);
@@ -245,7 +245,7 @@ module the_extruder(
// pushfit bracket
translate([0,0,filament_elevation])
- rotate([0,0,45]) translate([(pulley_d-filament_path_d)/2,0,0])
+ rotate([0,0,45]) translate([pulley_d/2,0,0])
rotate([-90,0,0])
translate([0,0,mount_d/sqrt(2)/2+mount_screw_d-gearbox_d/2/*TODO:*/]) {
pfb2a = pf_d(pf)+2*pf_shell; pfba = pfb2a/2;
@@ -279,7 +279,7 @@ module the_extruder(
}//for
// pushfit
translate([0,0,filament_elevation])
- rotate([0,0,45]) translate([(pulley_d-filament_path_d)/2,0,0])
+ rotate([0,0,45]) translate([pulley_d/2,0,0])
rotate([-90,0,0])
translate([0,0,mount_d/sqrt(2)/2+mount_screw_d+epsilon])
rotate([0,0,180]) {