be explicit about pulley clearance

I would've thought it's radial…

1 files changed, 3 insertions, 3 deletions

diff --git a/another.scad b/another.scad
index 50b3a84..6afa9ef 100644
--- a/another.scad
+++ b/another.scad
@@ -29,49 +29,49 @@ module the_extruder(
          filament_guide_d = 4,                  // PTFE filament guide diameter
  // knob properties
  knob_h = 10,
  knob_bore_l = 4,
  knob_indent_d = 4,
  knob_indents = 12,
  // spring tensioner
  st_nut_d = 9, st_nut_h = 4,
  st_screw_d = 5,
  st_thickshell = 8*extrusion_width, st_thinshell = 4*extrusion_width,
 
  // screw it
  mount_screw_d = 3.1, mount_screw_l = 20,
  mount_screwhead_d=6, mount_screwhead_h=3,
  idler_screw_d = 3,
  idler_screwhead_d=6, idler_screwhead_h=3,
 
  pf = pushfit_embeddest,
  pf_shell = max(3*layer_height,3*extrusion_width),
  pf_smooth = true,
 
  // empty spaces
          idler_travel = 3,                      // how far should idler travel when pressed
  idler_clearance=1,
- pulley_clearance=2,
+ pulley_d_clearance=2,
          lever_v_clearance=.7,                  // vertical clearance for the lever
  spring_d_clearance=1,
          protrusion_tolerance_h=.5,             // horizontal tolerance for the motor protrusion
          protrusion_tolerance_v=.5,             // vertical tolerance for the motor protrusion
  mount_screw_d_tolerance=.4,
  idler_v_tolerance=.5,
  knob_bore_d_tolerance=.6,
  st_nut_h_tolerance=.2,
  st_nut_d_tolerance=.2,/* TODO: make it st_nut_w_tolerance */
  st_screw_d_tolerance=.5,
 
  what="lever",  // lever|body|knob|springpad|*
  left=false,
  vitamins = true,
  supports = false, bridges = true,
  tensioner = true,
  debug = false
 ) {
  fnd = 2*PI; fnr = 2*fnd;
 
  idler_filament_offset = filament_path_d/2; // -filament_offset;
  lever_shell = mount_screwhead_h+0.5;
  lever_thickness=max(spring_d+spring_d_clearance+layer_height*8,idler_h+idler_v_tolerance+2*lever_shell);
  lsd = idler_d-idler_clearance*2;
@@ -288,49 +288,49 @@ module the_extruder(
    cylinder(d=protrusion_d+protrusion_tolerance_h,h=protrusion_h+protrusion_tolerance_v+1,$fn=fnd*(protrusion_d+protrusion_tolerance_h));
    // mount screw holes
    for(zr=[0:90:359]) rotate([0,0,zr]) translate([mount_d/2,0,0]) {
     translate([0,0,mount_screw_l-mounthole_depth/2-(bridges?layer_height:-epsilon)])
     mirror([0,0,1])
     cylinder(d=mount_screw_d+mount_screw_d_tolerance,
              h=mount_screw_l-mounthole_depth/2+1,
              $fn=fnd*(mount_screw_d+mount_screw_d_tolerance));
     translate([0,0,mount_screw_l-mounthole_depth/2])
     cylinder(d=mount_screwhead_d,h=body_h+1,$fn=fnd*mount_screwhead_d);
    }//for
    // pushfit
    translate([0,0,filament_elevation])
    rotate([0,0,45]) translate([pulley_d/2+filament_offset,0,0])
    rotate([-90,0,0])
    translate([0,0,mount_d/sqrt(2)/2+mount_screw_d+epsilon])
    rotate([0,0,180]) {
     pushfit(pf);
     cylinder(d=filament_guide_d,h=gearbox_d,center=true,$fn=fnd*filament_guide_d);
     translate([0,-filament_guide_d/2/sqrt(2),0])
     rotate([0,0,45])
     cube(size=[filament_guide_d/2,filament_guide_d/2,gearbox_d],center=true);
    }//rotate translate rotate translate rotate translate
    // pulley
-   cylinder(d=pulley_d+pulley_clearance,h=body_h+1,$fn=fnd*(pulley_d+pulley_clearance));
+   cylinder(d=pulley_d+pulley_d_clearance,h=body_h+1,$fn=fnd*(pulley_d+pulley_d_clearance));
    // leverspace
    hull() for(x=[0,gearbox_d])
    rotate([0,0,45])
    translate([x,0,ls_z-ls_h/2])
    cylinder(d=idler_d+idler_clearance,h=ls_h,$fn=fnd*(idler_d+idler_clearance));
 
    // idler clearance
    a=cos(45)*(pulley_d+idler_d)/2;
    b=mount_d/2-a;
    x=sqrt(pow(a,2)+pow(b,2));
    translate([mount_d/2,0,ls_z])
    intersection() {
     r = x+idler_d/2+idler_clearance;
     cylinder(r=r,h=ls_h,center=true);
     translate([-r-1,0,-ls_h/2-1]) cube(size=[2*r+2,r+1,ls_h+2]);
    }
 
    // back side cutout
    // XXX: this is somewhat ugly and potentially bugged,
    //      but I want to sleep.
    a0_ = atan(
     (mount_d/sqrt(2)/2+mount_screw_d+pf_h(pf)+gearbox_d/2)
     /
     (
@@ -351,49 +351,49 @@ module the_extruder(
    }//difference translate
    
    rotate([0,0,-45])
    translate([0,0,ls_z-ls_h/2])
    cube(size=[gearbox_d,gearbox_d,lever_thickness+lever_v_clearance]);
    translate([0,0,ls_z-ls_h/2]) {
     translate([mount_screwhead_d/2,0,0])
     mirror([0,1,0])
     cube(size=[gearbox_d,gearbox_d/2+1,lever_thickness+lever_v_clearance]);
    }
    //translate([-mount_d/2,-longwing,filament_elevation])
    if(!tensioner) /* XXX: this seems to be bullshit, but it's so old, that it's historical bullshit */
    translate([mount_d/2,-longwing,filament_elevation])
    rotate([0,-90,0]) difference() {
     cylinder(d=spring_d+spring_d_clearance,h=spring_lc+spring_dl,$fn=fnd*(spring_d+spring_d_clearance));
     translate([0,0,spring_lc+spring_dl]) sphere(d=spring_d*3/4,$fn=fnd*spring_d*3/4);
    }
 
   }//difference
 
   if(supports) intersection() {
    difference() {
     translate([0,0,ls_z-ls_h/2-epsilon])
     cylinder(d=gearbox_d,h=ls_h+2*epsilon,$fn=fnd*gearbox_d);
-    cylinder(d=pulley_d+pulley_clearance,h=body_h+1,$fn=fnd*(pulley_d+pulley_clearance));
+    cylinder(d=pulley_d+pulley_d_clearance,h=body_h+1,$fn=fnd*(pulley_d+pulley_d_clearance));
    }
    // supports
    // TODO: hardcoded stuff below…
    if(false) { // parallel
     for(y=[-gearbox_d:4:gearbox_d])
      translate([0,y-extrusion_width/2,0])
      cube(size=[gearbox_d,extrusion_width,body_h]);
    }else{ // radial
     for(zr=[-65:(65+50)/7:50])
      rotate([0,0,zr]) translate([0,-extrusion_width/2,0])
      cube(size=[gearbox_d,extrusion_width,body_h]);
    }
   }
 
  }//body module
 
  module springpad() {
   smalld=st_screw_d+st_screw_d_tolerance+2*extrusion_width;
   bigd = spring_d+spring_d_clearance/2;
   hf = (bigd-smalld)/2;
   translate([-gearbox_d/2+st_thickshell+st_nut_h+st_nut_h_tolerance+st_thinshell+1,-longwing,filament_elevation])
   rotate([0,90,0]) difference() {
    union() {
     cylinder(d1=smalld,d2=bigd,h=hf,$fn=fnd*bigd);