summaryrefslogtreecommitdiff
Side-by-side diff
Diffstat (more/less context) (ignore whitespace changes)
-rw-r--r--another.scad13
1 files changed, 12 insertions, 1 deletions
diff --git a/another.scad b/another.scad
index bb67dea..297c1fc 100644
--- a/another.scad
+++ b/another.scad
@@ -63,25 +63,26 @@ module the_extruder(
st_nut_h_tolerance=.2,
st_nut_d_tolerance=.2,/* TODO: make it st_nut_w_tolerance */
st_screw_d_tolerance=.5,
st_split_w_tolerance = .3,
min_z_shell = 4*layer_height, // the very minimal shell thickness along z-axis.
min_xy_shell = 2*extrusion_width,
what="lever", // lever|body|knob|springpad|*
left=false,
vitamins = true,
bridges = true,
- debug = false
+ debug = false,
+ label = "another"
) {
fnd = 2*PI; fnr = 2*fnd;
idler_filament_offset = filament_path_d/2; // -filament_offset;
lever_shell = mount_screwhead_h+0.5;
lever_thickness=max(spring_d+spring_d_clearance+layer_height*8,idler_h+idler_v_tolerance+2*lever_shell);
lsd = idler_d-idler_clearance*2; // the diameter of lever thingie
longwing=(mount_d+mount_screw_d+mount_screw_d_tolerance+spring_d+spring_d_clearance)/2+min_xy_shell;
shortwing = let(a=mount_d/2,c=(pulley_d+idler_d)/2/sqrt(2))
sqrt(c*c+pow(a-c,2));
longwing_travel = idler_travel*longwing/shortwing;
h_ = (pulley_d+idler_d)/(2*sqrt(2));
@@ -359,24 +360,34 @@ module the_extruder(
hf = (bigd-st_screw_d-st_screw_d_tolerance)/2;
translate([0,0,st_thickshell+st_nut_h+st_nut_h_tolerance+st_thinshell-epsilon]) {
cylinder(d1=st_screw_d+st_screw_d_tolerance,d2=bigd,
h=hf+epsilon, $fn=fnd*bigd);
translate([0,-(st_thinshell+st_split_w_tolerance)/2,0])
cube(size=[body_h-ls_z+1,st_thinshell+st_split_w_tolerance,fsw+1]);
}//translate
translate([0,0,st_thickshell+st_nut_h+st_nut_h_tolerance+st_thinshell+hf-epsilon])
cylinder(d=bigd,h=fsw+1,$fn=fnd*bigd);
}//mirror
}//translate
+ // label
+ label_thickness = 2*layer_height;
+ label_len = len(label);
+ labelspace = [gearbox_d/2-mount_screwhead_d/2-min_xy_shell,longwing-(mount_screwhead_d-st_thinshell-st_split_w_tolerance)/2-2*min_xy_shell-mount_d/2];
+ translate([0,0,body_h-label_thickness])
+ linear_extrude(height=label_thickness+epsilon,convexity=64)
+ translate([-mount_screwhead_d/2-min_xy_shell-labelspace.x/2,-longwing+(st_thinshell+st_split_w_tolerance)/2+min_xy_shell+labelspace.y/2])
+ mirror([left?0:1,0])
+ text(text=label,size=labelspace.x/label_len,halign="center",valign="center",font="Arial Black");
+
}//difference
}//body module
module springpad() {
smalld=st_screw_d+st_screw_d_tolerance+min_xy_shell;
bigd = spring_d+spring_d_clearance/2;
hf = (bigd-smalld)/2;
h = hf*3.5;
translate([-gearbox_d/2+st_thickshell+st_nut_h+st_nut_h_tolerance+st_thinshell+1,-longwing,filament_elevation])
rotate([0,90,0]) difference() {
union() {