-rw-r--r-- | another.scad | 11 |
1 files changed, 8 insertions, 3 deletions
diff --git a/another.scad b/another.scad index 92187c5..8ba0d58 100644 --- a/another.scad +++ b/another.scad @@ -71,32 +71,34 @@ module the_extruder( what="lever", // lever|body|knob|springpad|* left=false, vitamins = true, bridges = true, debug = false, ) { fnd = 2*PI; fnr = 2*fnd; function lu(m,k) = m[search([k],m)[0]][1]; pulley_d = lu(pulley,"d"); pulley_h = lu(pulley,"h"); teeth_elevation = lu(pulley,"fe"); filament_offset = lu(pulley,"g")+filament_d/2; pulley_d_clearance = lu(pulley,"ssrc")*2; + sp_ch = st_split_w; + idler_filament_offset = filament_path_d/2; lever_shell = mount_screwhead_h+0.5; lever_thickness=max(spring_d+spring_d_clearance+layer_height*8,idler_h+idler_v_tolerance+2*lever_shell); lsd = idler_d-idler_clearance*2; // the diameter of lever thingie longwing=(mount_d+mount_screw_d+mount_screw_d_tolerance+spring_d+spring_d_clearance)/2+min_xy_shell; shortwing = let(a=mount_d/2,c=(pulley_d+idler_d)/2/sqrt(2)) sqrt(c*c+pow(a-c,2)); longwing_travel = idler_travel*longwing/shortwing; h_ = (pulley_d+idler_d)/(2*sqrt(2)); ri = sqrt( pow(h_,2) + pow(mount_d/2-h_,2) ); spring_dl = idler_travel*longwing/ri; // finger and spring support width fsw = gearbox_d-(gearbox_d-mount_d)/2-max(spring_lc,longwing_travel+(gearbox_d-mount_d)/2); mount_min_depth = mounthole_min_depth ? mounthole_min_depth : mounthole_depth-1; mount_max_depth = mounthole_max_depth ? mounthole_max_depth : mounthole_depth+1; @@ -345,34 +347,37 @@ module the_extruder( cylinder(d=gearbox_d-mount_d,h=ls_h+2,center=true,$fn=fnd*(gearbox_d-mount_d)); }//difference translate // spring tensioner translate([-gearbox_d/2,-longwing,ls_z]) rotate([0,-90,0]) { mirror([0,0,1]) { translate([0,0,st_thickshell]) hull() for(o=[0,spring_d]) translate([0,-o,0]) rotate([0,0,30]) cylinder(d=st_nut_d+st_nut_d_tolerance,h=st_nut_h+st_nut_h_tolerance,$fn=6); translate([0,0,-1]) cylinder(d=st_screw_d+st_screw_d_tolerance,h=fsw+2,$fn=fnd*(st_screw_d+st_screw_d_tolerance)); bigd = spring_d+spring_d_clearance; hf = (bigd-st_screw_d-st_screw_d_tolerance)/2; translate([0,0,st_thickshell+st_nut_h+st_nut_h_tolerance+st_thinshell-epsilon]) { cylinder(d1=st_screw_d+st_screw_d_tolerance,d2=bigd, h=hf+epsilon, $fn=fnd*bigd); - translate([0,-(st_split_w+st_split_w_tolerance)/2,0]) - cube(size=[body_h-ls_z+1,st_split_w+st_split_w_tolerance,fsw+1]); + translate([0,-(st_split_w+st_split_w_tolerance)/2,0]) hull() { + cube(size=[body_h-ls_z-sp_ch-st_split_w_tolerance,st_split_w+st_split_w_tolerance,fsw+1]); + translate([0,0,sp_ch+st_split_w_tolerance+1]) + cube(size=[body_h-ls_z+1,st_split_w+st_split_w_tolerance,fsw+1]); + } }//translate translate([0,0,st_thickshell+st_nut_h+st_nut_h_tolerance+st_thinshell+hf-epsilon]) cylinder(d=bigd,h=fsw+1,$fn=fnd*bigd); }//mirror }//translate // label body_label(); }//difference }//body module module body_label() { if(body_label) { label=body_label; label_thickness=body_label_thickness; @@ -387,33 +392,33 @@ module the_extruder( } module springpad() { smalld=st_screw_d+st_screw_d_tolerance+min_xy_shell; bigd = spring_d+spring_d_clearance/2; hf = (bigd-smalld)/2; h = max(hf,fsw-st_screw_l+hf); translate([-gearbox_d/2+fsw-h,-longwing,filament_elevation]) rotate([0,90,0]) difference() { union() { cylinder(d1=smalld,d2=bigd,h=hf,$fn=fnd*bigd); translate([0,0,hf-epsilon]) cylinder(d=bigd,h=h-hf,$fn=fnd*bigd); translate([0,0,h]) sphere(d=spring_d*3/4,$fn=fnd*spring_d*3/4); l = body_h-ls_z; - w = st_split_w; + w = sp_ch; hull() translate([0,-st_split_w/2,0]) mirror([1,0,0]) { translate([0,0,w]) cube(size=[l,st_split_w,w]); cube(size=[l-w,st_split_w,2*w]); } } translate([0,0,-epsilon]) cylinder(d=st_screw_d+st_screw_d_tolerance,h=st_screw_l-fsw+h+2*epsilon,$fn=fnd*(st_screw_d+st_screw_d_tolerance)); } } module knob() { ch = knob_indent_d/2; knob_bore_l = body_h-protrusion_h-pulley_elevation-pulley_h-knob_v_clearance; translate([0,0,body_h+epsilon]) { mirror([0,0,1]) translate([0,0,-epsilon]) { |