summaryrefslogtreecommitdiff
Side-by-side diff
Diffstat (more/less context) (ignore whitespace changes)
-rw-r--r--another.scad12
-rw-r--r--pulley_data.scad8
2 files changed, 16 insertions, 4 deletions
diff --git a/another.scad b/another.scad
index ed18874..51358ee 100644
--- a/another.scad
+++ b/another.scad
@@ -6,4 +6,5 @@ $fs=0.0125;
use <pushfittery.scad>;
include <pushfit_data.scad>;
+include <pulley_data.scad>;
module the_extruder(
@@ -17,8 +18,6 @@ module the_extruder(
bore_dd = 7,
// pulley properties
- pulley_d = 11.5, pulley_h=10,
+ pulley = pulley_e3d,
pulley_elevation = 1, // pulley elevation above the protrusion
- teeth_elevation = 7.5, // distance from the bottom of the pulley to its teeth
- filament_offset = (8.25-(3.0+3.5)/2) - 11.5/2 + 1.75/2,
// idler properties
idler_d = 9.5, idler_h = 4, idler_id = 3, // idler dimensions: outer and inner diameters and height
@@ -53,5 +52,4 @@ module the_extruder(
idler_travel = 3, // how far should idler travel when pressed
idler_clearance=1,
- pulley_d_clearance=2,
pulley_small_d_clearance=0.5,
lever_v_clearance=.7, // vertical clearance for the lever
@@ -78,5 +76,11 @@ module the_extruder(
) {
fnd = 2*PI; fnr = 2*fnd;
+ function lu(m,k) = m[search([k],m)[0]][1];
+ pulley_d = lu(pulley,"d");
+ pulley_h = lu(pulley,"h");
+ teeth_elevation = lu(pulley,"fe");
+ filament_offset = lu(pulley,"g")+filament_d/2;
+ pulley_d_clearance = lu(pulley,"ssrc")*2;
idler_filament_offset = filament_path_d/2; // -filament_offset;
lever_shell = mount_screwhead_h+0.5;
diff --git a/pulley_data.scad b/pulley_data.scad
new file mode 100644
index 0000000..a1523de
--- a/dev/null
+++ b/pulley_data.scad
@@ -0,0 +1,8 @@
+pulley_e3d = [
+ ["d", 11.5 ], // outer diameter
+ ["h", 11 ], // pulley height
+ ["g", 8.25-3 - 11.5/2 ], // depth of U-groove, filament offset from the surface
+ ["fe", 7.5 ], // filament elevation from the bottom
+ ["ssrc", 2 ], // set screw radial clearance
+];
+