| -rw-r--r-- | another.scad | 13 |
1 files changed, 7 insertions, 6 deletions
diff --git a/another.scad b/another.scad index b80d0d0..a93d21a 100644 --- a/another.scad +++ b/another.scad @@ -1,44 +1,45 @@ draft=true; layer_height=0.2; extrusion_width=0.4; epsilon=0.01; $fs=0.0125; use <pushfittery.scad>; include <pushfit_data.scad>; module the_extruder( // motor properties gearbox_d = 36, mount_d = 28, // the distance between opposite mounting holes mounthole_depth = 5, protrusion_d = 22, protrusion_h = 2.2, // the dimensions of the protrusion on top of gearbox bore_d = 8, bore_l = 17.6, bore_dd = 7, // pulley properties pulley_d = 11.5, pulley_h=10, pulley_elevation = 1, // pulley elevation above the protrusion teeth_elevation = 7.5, // distance from the bottom of the pulley to its teeth + filament_offset = (8.25-(3.0+3.5)/2) - 11.5/2 + 1.75/2, // idler properties idler_d = 9.5, idler_h = 4, idler_id = 3, // idler dimensions: outer and inner diameters and height // spring properties spring_d = 10, spring_lc = 9.6, // spring diameter and compressed length // filament path properties filament_d = 1.75, filament_path_d = 2, filament_guide_d = 4, // PTFE filament guide diameter // knob properties knob_h = 10, knob_bore_l = 4, knob_indent_d = 4, knob_indents = 12, // spring tensioner st_nut_d = 9, st_nut_h = 4, st_screw_d = 5, st_thickshell = 8*extrusion_width, st_thinshell = 4*extrusion_width, // screw it mount_screw_d = 3.1, mount_screw_l = 20, mount_screwhead_d=6, mount_screwhead_h=3, idler_screw_d = 3, idler_screwhead_d=6, idler_screwhead_h=3, @@ -100,85 +101,85 @@ module the_extruder( hh=sqrt(pow(r,2)-pow(d,2)/4); translate([0,0,hh]) sphere(r=r,$fn=fnr*r); } } % if(vitamins) mirrorleft() { translate([0,0,-epsilon]) mirror([0,0,1]) cylinder(d=gearbox_d,h=1,$fn=60); for(zr=[0:90:359]) rotate([0,0,zr]) translate([mount_d/2,0,0]) cylinder(d=mount_screw_d,h=20,$fn=30); translate([0,0,-epsilon]) cylinder(d=protrusion_d,h=protrusion_h,$fn=30); translate([0,0,protrusion_h]) { difference() { cylinder(d=bore_d,h=bore_l,$fn=30); translate([-bore_d/2-1,bore_dd-bore_d/2,-1]) cube([bore_d+2,bore_d/2,bore_l+2]); } translate([0,0,pulley_elevation]) { cylinder(d=pulley_d,h=pulley_h,$fn=30); translate([0,0,teeth_elevation]) { place_idler() { cylinder(d=idler_d,h=idler_h,center=true,$fn=30); cylinder(d=idler_screw_d,h=lever_thickness+2,center=true,$fn=30); }//place idler // filament path - rotate([0,0,45]) translate([pulley_d/2,0,0]) { + rotate([0,0,45]) translate([pulley_d/2+filament_offset,0,0]) { rotate([90,0,0]) cylinder(d=filament_d,h=gearbox_d*2,center=true,$fn=15); rotate([-90,0,0]) translate([0,0,mount_d/sqrt(2)/2+mount_screw_d]) pushfit(pf); } }//translate teeth }//translate pulley }//translate protrusion }//vitamins module lever() { translate([0,0,protrusion_h+pulley_elevation+teeth_elevation]) { difference() { union() { hull() { place_idler() cylinder(d=lsd,h=lever_thickness,center=true,$fn=60); translate([mount_d/2,0,0]) cylinder(d=lsd,h=lever_thickness,center=true,$fn=60); }//hull hull() { translate([mount_d/2,0,0]) cylinder(d=lsd,h=lever_thickness,center=true,$fn=60); translate([mount_d/2,-longwing,0]) rotate([0,90,0]) cylinder(d=lever_thickness,h=lsd,center=true,$fn=60); }//hull }//union // filament path place_idler() { - translate([-idler_d/2,0,0]) rotate([90,0,0]) { + translate([-idler_d/2+filament_offset,0,0]) rotate([90,0,0]) { cylinder(d=filament_path_d,h=3*gearbox_d,center=true,$fn=30); translate([0,-filament_path_d/2/sqrt(2),0]) rotate([0,0,45]) cube(size=[filament_path_d/2,filament_path_d/2,3*gearbox_d],center=true); }//rotate translate - translate([-idler_d/2,0,0]) + translate([-idler_d/2+filament_offset,0,0]) rotate([90,0,0]) translate([0,0, sqrt(2)*(mount_d-pulley_d+lsd)/2 ]) { cylinder(d1=filament_path_d,d2=2*filament_path_d, h=filament_path_d,$fn=2*filament_path_d*fnd); translate([0,0,filament_path_d-epsilon]) cylinder(d=2*filament_path_d,h=lsd,$fn=2*filament_path_d*fnd); } }//place_idler // idler space and mounting hole place_idler() { difference() { cylinder(d=idler_d+idler_clearance*2,h=idler_h+idler_v_tolerance,center=true,$fn=60); if(supports) for(y=[-lsd/2+extrusion_width:(lsd-2*extrusion_width)/3:lsd/2-extrusion_width]) translate([-lsd/2-1,y-extrusion_width/2,-idler_h/2-idler_v_tolerance/2-1]) cube(size=[lsd+2,extrusion_width,idler_h+idler_v_tolerance+2]); } cylinder(d=idler_screw_d,h=lever_thickness+2,center=true,$fn=30); translate([0,0,lever_thickness/2-idler_screwhead_h]) cylinder(d=idler_screwhead_d,h=idler_screwhead_h+1,$fn=fnd*idler_screwhead_d); } // mounting screw hole @@ -225,131 +226,131 @@ module the_extruder( } } translate([0,-longwing,ls_z]) rotate([0,-90,0]) { if(!tensioner) finger_indent(d=lever_thickness-1,r=15); else { mirror([0,0,1]) { translate([0,0,st_thickshell]) hull() for(o=[0,spring_d]) translate([0,-o,0]) rotate([0,0,30]) cylinder(d=st_nut_d+st_nut_d_tolerance,h=st_nut_h+st_nut_h_tolerance,$fn=6); translate([0,0,-1]) cylinder(d=st_screw_d+st_screw_d_tolerance,h=fsw+2,$fn=fnd*(st_screw_d+st_screw_d_tolerance)); bigd = spring_d+spring_d_clearance; hf = (bigd-st_screw_d-st_screw_d_tolerance)/2; translate([0,0,st_thickshell+st_nut_h+st_nut_h_tolerance+st_thinshell-epsilon]) cylinder(d1=st_screw_d+st_screw_d_tolerance,d2=bigd, h=hf+epsilon, $fn=fnd*bigd); translate([0,0,st_thickshell+st_nut_h+st_nut_h_tolerance+st_thinshell+hf-epsilon]) cylinder(d=bigd,h=fsw+1,$fn=fnd*bigd); } } } } // translate // pushfit bracket translate([0,0,filament_elevation]) - rotate([0,0,45]) translate([pulley_d/2,0,0]) + rotate([0,0,45]) translate([pulley_d/2+filament_offset,0,0]) rotate([-90,0,0]) translate([0,0,mount_d/sqrt(2)/2+mount_screw_d-gearbox_d/2/*TODO:*/]) { pfbl = pf_h(pf)+gearbox_d/2; //TODO: if(pf_smooth) { pfbd = pf_d(pf)+2*pf_shell; hull() { cylinder(d=pfbd,h=pfbl,$fn=pfbd*fnd); translate([-epsilon/2,0,0]) { cube(size=[epsilon,filament_elevation,pfbl-filament_elevation+pfbd/2]); mirror([0,1,0]) cube(size=[epsilon,body_h-filament_elevation,pfbl-body_h+filament_elevation+pfbd/2]); }//translate }//hull }else{ pfb2a = pf_d(pf)+2*pf_shell; pfba = pfb2a/2; pfbd = pfb2a/cos(30); pfbs = pfb2a*tan(30); cylinder(d=pfbd,h=pfbl,$fn=6); translate([-pfbs/2,0,0]) { hull() { translate([0,-pfba,0]) cube(size=[pfbs,pfb2a,pfbl]); cube(size=[pfbs,filament_elevation,pfbl-filament_elevation+pfba]); mirror([0,1,0]) cube(size=[pfbs,body_h-filament_elevation,pfbl-body_h+filament_elevation+pfba]); }//hull }//translate*/ }//if(pf_smooth) }//translate rotate translate rotate translate }//union (first child of difference) // protrusion translate([0,0,-1]) cylinder(d=protrusion_d+protrusion_tolerance_h,h=protrusion_h+protrusion_tolerance_v+1,$fn=fnd*(protrusion_d+protrusion_tolerance_h)); // mount screw holes for(zr=[0:90:359]) rotate([0,0,zr]) translate([mount_d/2,0,0]) { translate([0,0,mount_screw_l-mounthole_depth/2-(bridges?layer_height:-epsilon)]) mirror([0,0,1]) cylinder(d=mount_screw_d+mount_screw_d_tolerance, h=mount_screw_l-mounthole_depth/2+1, $fn=fnd*(mount_screw_d+mount_screw_d_tolerance)); translate([0,0,mount_screw_l-mounthole_depth/2]) cylinder(d=mount_screwhead_d,h=body_h+1,$fn=fnd*mount_screwhead_d); }//for // pushfit translate([0,0,filament_elevation]) - rotate([0,0,45]) translate([pulley_d/2,0,0]) + rotate([0,0,45]) translate([pulley_d/2+filament_offset,0,0]) rotate([-90,0,0]) translate([0,0,mount_d/sqrt(2)/2+mount_screw_d+epsilon]) rotate([0,0,180]) { pushfit(pf); cylinder(d=filament_guide_d,h=gearbox_d,center=true,$fn=fnd*filament_guide_d); translate([0,-filament_guide_d/2/sqrt(2),0]) rotate([0,0,45]) cube(size=[filament_guide_d/2,filament_guide_d/2,gearbox_d],center=true); }//rotate translate rotate translate rotate translate // pulley cylinder(d=pulley_d+pulley_clearance,h=body_h+1,$fn=fnd*(pulley_d+pulley_clearance)); // leverspace hull() for(x=[0,gearbox_d]) rotate([0,0,45]) translate([x,0,ls_z-ls_h/2]) cylinder(d=idler_d+idler_clearance,h=ls_h,$fn=fnd*(idler_d+idler_clearance)); // idler clearance a=cos(45)*(pulley_d+idler_d)/2; b=mount_d/2-a; x=sqrt(pow(a,2)+pow(b,2)); translate([mount_d/2,0,ls_z]) intersection() { r = x+idler_d/2+idler_clearance; cylinder(r=r,h=ls_h,center=true); translate([-r-1,0,-ls_h/2-1]) cube(size=[2*r+2,r+1,ls_h+2]); } // back side cutout // XXX: this is somewhat ugly and potentially bugged, // but I want to sleep. a0_ = atan( (mount_d/sqrt(2)/2+mount_screw_d+pf_h(pf)+gearbox_d/2) / ( - pulley_d/2- + pulley_d/2+filament_offset- (pf_d(pf)+2*pf_shell)/2/cos(30) ) ); a0 = -135 + ( (a0_>0) ? a0_ : 180+a0_ ); a1 = atan((longwing-lever_thickness/2)/(gearbox_d/2)); translate([0,0,ls_z]) difference() { rotate([0,0,-180+a0]) rotate_extrude(angle=a1-a0) translate([0,-ls_h/2]) square([sqrt(pow(gearbox_d/2,2)+pow(longwing-lever_thickness/2,2))+1, ls_h]); translate([-mount_d/2,0,0]) cylinder(d=gearbox_d-mount_d,h=ls_h+2,center=true,$fn=fnd*(gearbox_d-mount_d)); }//difference translate rotate([0,0,-45]) translate([0,0,ls_z-ls_h/2]) cube(size=[gearbox_d,gearbox_d,lever_thickness+lever_v_clearance]); translate([0,0,ls_z-ls_h/2]) { translate([mount_screwhead_d/2,0,0]) mirror([0,1,0]) cube(size=[gearbox_d,gearbox_d/2+1,lever_thickness+lever_v_clearance]); } //translate([-mount_d/2,-longwing,filament_elevation]) |