| -rw-r--r-- | another.scad | 1 |
1 files changed, 0 insertions, 1 deletions
diff --git a/another.scad b/another.scad index b2e6c74..2331003 100644 --- a/another.scad +++ b/another.scad @@ -280,97 +280,96 @@ module the_extruder( }//if(pf_smooth) }//translate rotate translate rotate translate }//union (first child of difference) // protrusion translate([0,0,-1]) cylinder(d=protrusion_d+protrusion_tolerance_h,h=protrusion_h+protrusion_tolerance_v+1,$fn=fnd*(protrusion_d+protrusion_tolerance_h)); // mount screw holes for(zr=[0:90:359]) rotate([0,0,zr]) translate([mount_d/2,0,0]) { translate([0,0,mount_screw_l-mount_depth-(bridges?layer_height:-epsilon)]) mirror([0,0,1]) cylinder(d=mount_screw_d+mount_screw_d_tolerance, h=mount_screw_l-mount_depth+1, $fn=fnd*(mount_screw_d+mount_screw_d_tolerance)); translate([0,0,mount_screw_l-mount_depth]) cylinder(d=mount_screwhead_d,h=body_h+1,$fn=fnd*mount_screwhead_d); }//for // pushfit pf_offset = mount_d/sqrt(2)/2+mount_screw_d; translate([0,0,filament_elevation]) rotate([0,0,45]) translate([pulley_d/2+filament_offset,0,0]) rotate([-90,0,0]) translate([0,0,pf_offset]) rotate([0,0,180]) { pushfit(pf); mirror([0,0,1]) { fh = 1.5* (filament_guide_d-filament_path_d)/2; fo = pf_offset -filament_path_d /*(idler_d+idler_clearance)/2*/-fh; translate([0,0,-1]) teardrop(d=filament_guide_d,h=fo/2,angle=225); translate([0,0,-1]) teardrop(d=filament_path_d,h=gearbox_d/2+1,angle=-225); translate([0,0,fo+epsilon]) cylinder(d1=filament_path_d,d2=filament_guide_d,h=fh,$fn=fnd*filament_guide_d); }//mirror }//rotate translate rotate translate rotate translate // pulley cylinder(d=pulley_d+pulley_small_d_clearance,h=body_h+1,$fn=fnd*(pulley_d+pulley_d_clearance)); cylinder(d=pulley_d+pulley_d_clearance,ls_z-max(idler_h,filament_guide_d)/2,$fn=fnd*(pulley_d+pulley_d_clearance)); translate([0,0,ls_z-ls_h/2]) { // idler travel translate([mount_d/2,0,0]) rotate([0,0,45]) rotate_extrude(angle=90,$fn=fnr*(shortwing+(idler_d+idler_clearance)/2)) square([shortwing+(idler_d+idler_clearance)/2,ls_h]); // idler itself place_idler() cylinder(d=idler_d+idler_clearance,h=ls_h,$fn=fnd*(idler_d+idler_clearance)); // lever space - echo(atan(1-2*fsw/gearbox_d)); rotate([0,0,45]) rotate_extrude(angle=-135+max(atan(2*fsw/gearbox_d-1),atan(gearbox_d/mount_d-1))) square([gearbox_d/2+1,ls_h]); } // back side cutout // XXX: this is somewhat ugly and potentially bugged, // but I want to sleep. a0_ = atan( (mount_d/sqrt(2)/2+mount_screw_d+pf_h(pf)+gearbox_d/2) / ( pulley_d/2+filament_offset- (pf_d(pf)+2*pf_shell)/2/cos(30) ) ); a0 = -135 + ( (a0_>0) ? a0_ : 180+a0_ ); a1 = atan((longwing-lever_thickness/2)/(gearbox_d/2)); translate([0,0,ls_z]) difference() { rotate([0,0,-180+a0]) rotate_extrude(angle=a1-a0) translate([0,-ls_h/2]) square([sqrt(pow(gearbox_d/2,2)+pow(longwing-lever_thickness/2,2))+1, ls_h]); translate([-mount_d/2,0,0]) cylinder(d=gearbox_d-mount_d,h=ls_h+2,center=true,$fn=fnd*(gearbox_d-mount_d)); }//difference translate //translate([-mount_d/2,-longwing,filament_elevation]) if(!tensioner) /* XXX: this seems to be bullshit, but it's so old, that it's historical bullshit */ translate([mount_d/2,-longwing,filament_elevation]) rotate([0,-90,0]) difference() { cylinder(d=spring_d+spring_d_clearance,h=spring_lc+spring_dl,$fn=fnd*(spring_d+spring_d_clearance)); translate([0,0,spring_lc+spring_dl]) sphere(d=spring_d*3/4,$fn=fnd*spring_d*3/4); } // spring tensioner translate([-gearbox_d/2,-longwing,ls_z]) rotate([0,-90,0]) { if(!tensioner) finger_indent(d=lever_thickness-1,r=15); else { mirror([0,0,1]) { translate([0,0,st_thickshell]) hull() for(o=[0,spring_d]) translate([0,-o,0]) rotate([0,0,30]) cylinder(d=st_nut_d+st_nut_d_tolerance,h=st_nut_h+st_nut_h_tolerance,$fn=6); translate([0,0,-1]) cylinder(d=st_screw_d+st_screw_d_tolerance,h=fsw+2,$fn=fnd*(st_screw_d+st_screw_d_tolerance)); bigd = spring_d+spring_d_clearance; hf = (bigd-st_screw_d-st_screw_d_tolerance)/2; translate([0,0,st_thickshell+st_nut_h+st_nut_h_tolerance+st_thinshell-epsilon]) { |