| -rw-r--r-- | Makefile | 4 | ||||
| -rw-r--r-- | another.scad | 38 |
2 files changed, 40 insertions, 2 deletions
@@ -8,15 +8,17 @@ default: @echo "And?" clean: rm -f *.stl *.gcode stl-another-%: - $(MAKE) another-$*-{body,lever}.stl + $(MAKE) another-$*-{body,lever,knob}.stl another-%-body.stl: another-%.scad another.scad $(OPENSCAD_BIN) $(OPENSCAD_FLAGS) -D 'what="body"' -o "$@" "$<" another-%-lever.stl: another-%.scad another.scad $(OPENSCAD_BIN) $(OPENSCAD_FLAGS) -D 'what="lever"' -o "$@" "$<" +another-%-knob.stl: another-%.scad another.scad + $(OPENSCAD_BIN) $(OPENSCAD_FLAGS) -D 'what="knob"' -o "$@" "$<" %.stl: %.scad ${OPENSCAD_BIN} ${OPENSCAD_FLAGS} -o "$@" "$<" diff --git a/another.scad b/another.scad index fa60676..9f42f46 100644 --- a/another.scad +++ b/another.scad @@ -29,12 +29,17 @@ module the_extruder( // spring properties spring_d = 10, spring_lc = 9.6, // spring diameter and compressed length // filament path properties filament_d = 1.75, filament_path_d = 2, filament_guide_d = 4, // PTFE filament guide diameter + // knob properties + knob_h = 10, + knob_bore_l = 4, + knob_indent_d = 4, + knob_indents = 12, // screw it mount_screw_d = 3, mount_screw_l = 20, mount_screwhead_d=6, mount_screwhead_h=3, // empty spaces @@ -44,12 +49,13 @@ module the_extruder( lever_v_clearance=.7, // vertical clearance for the lever spring_d_clearance=1, protrusion_tolerance_h=.5, // horizontal tolerance for the motor protrusion protrusion_tolerance_v=.5, // vertical tolerance for the motor protrusion mount_screw_d_tolerance=.5, idler_v_tolerance=.5, + knob_bore_d_tolerance=.6, what="lever", left=false, vitamins = true ) { lever_shell = mount_screwhead_h+0.5; @@ -289,17 +295,47 @@ module the_extruder( rotate([0,0,zr]) translate([0,-extrusion_width/2,0]) cube(size=[gearbox_d,extrusion_width,body_h]); } } }//body module + + module knob() { + ch = knob_indent_d/2; + translate([0,0,body_h+epsilon]) { + mirror([0,0,1]) translate([0,0,-epsilon]) { + difference() { + cylinder(d=pulley_d,h=knob_bore_l,$fn=pulley_d*PI*2); + translate([0,0,-1]) difference() { + cylinder(d=bore_d+knob_bore_d_tolerance,h=knob_bore_l+2); + translate([-bore_d/2-1,bore_dd-bore_d/2+knob_bore_d_tolerance/2,-1]) + cube([bore_d+2,bore_d/2,knob_bore_l+4]); + } + } + } + difference() { + union() { + cylinder(d1=gearbox_d-2*ch,d2=gearbox_d,h=ch+epsilon,$fn=PI*gearbox_d*2); + translate([0,0,ch]) + cylinder(d=gearbox_d,h=knob_h-2*ch+epsilon,$fn=PI*gearbox_d*2); + translate([0,0,knob_h-ch]) + cylinder(d1=gearbox_d,d2=gearbox_d-2*ch,h=ch,$fn=PI*gearbox_d*2); + } + for(a=[0:360/knob_indents:359]) rotate([0,0,a]) + translate([0,gearbox_d/2,-1]) + cylinder(d=knob_indent_d,h=knob_h+2,$fn=knob_indent_d*PI*2); + } + } + }//knob module mirrorleft() if(what=="lever") color("green",0.7) lever(); else if(what=="body") color("yellow",0.7) body(); - else if(what=="both") { + else if(what=="knob") color("red",0.7) knob(); + else if(what=="both" || what=="*") { color("green",0.7) lever(); color("yellow",0.7) body(); + color("red",0.7) knob(); } } the_extruder(what="both",left=false); |