summaryrefslogtreecommitdiff
Side-by-side diff
Diffstat (more/less context) (show whitespace changes)
-rw-r--r--another.scad21
1 files changed, 12 insertions, 9 deletions
diff --git a/another.scad b/another.scad
index 297c1fc..ed18874 100644
--- a/another.scad
+++ b/another.scad
@@ -37,6 +37,7 @@ module the_extruder(
st_nut_d = 9, st_nut_h = 4,
st_screw_d = 5,
st_thickshell = 8*extrusion_width, st_thinshell = 2*extrusion_width,
+ st_split_w = 4*extrusion_width,
// screw it
mount_screw_d = 3.1, mount_screw_l = 20,
@@ -237,7 +238,7 @@ module the_extruder(
cylinder(d=lever_thickness,h=fsw,$fn=fnd*lever_thickness);
hh=body_h-ls_z;
translate([0,0,ls_z])
- mirror([0,1,0]) cube(size=[fsw,longwing+(st_thinshell+st_split_w_tolerance)/2+st_thickshell,body_h-ls_z]);
+ mirror([0,1,0]) cube(size=[fsw,longwing+(st_split_w+st_split_w_tolerance)/2+st_thickshell,body_h-ls_z]);
hhh=ls_z;
translate([0,0,0])
mirror([0,1,0]) cube(size=[fsw,longwing-hhh+lever_thickness/sqrt(2),hhh+lever_thickness/2]);
@@ -361,8 +362,8 @@ module the_extruder(
translate([0,0,st_thickshell+st_nut_h+st_nut_h_tolerance+st_thinshell-epsilon]) {
cylinder(d1=st_screw_d+st_screw_d_tolerance,d2=bigd,
h=hf+epsilon, $fn=fnd*bigd);
- translate([0,-(st_thinshell+st_split_w_tolerance)/2,0])
- cube(size=[body_h-ls_z+1,st_thinshell+st_split_w_tolerance,fsw+1]);
+ translate([0,-(st_split_w+st_split_w_tolerance)/2,0])
+ cube(size=[body_h-ls_z+1,st_split_w+st_split_w_tolerance,fsw+1]);
}//translate
translate([0,0,st_thickshell+st_nut_h+st_nut_h_tolerance+st_thinshell+hf-epsilon])
cylinder(d=bigd,h=fsw+1,$fn=fnd*bigd);
@@ -372,12 +373,14 @@ module the_extruder(
// label
label_thickness = 2*layer_height;
label_len = len(label);
- labelspace = [gearbox_d/2-mount_screwhead_d/2-min_xy_shell,longwing-(mount_screwhead_d-st_thinshell-st_split_w_tolerance)/2-2*min_xy_shell-mount_d/2];
+ if(label_len) {
+ labelspace = [gearbox_d/2-mount_screwhead_d/2-min_xy_shell,longwing-(mount_screwhead_d-st_split_w-st_split_w_tolerance)/2-2*min_xy_shell];
translate([0,0,body_h-label_thickness])
linear_extrude(height=label_thickness+epsilon,convexity=64)
- translate([-mount_screwhead_d/2-min_xy_shell-labelspace.x/2,-longwing+(st_thinshell+st_split_w_tolerance)/2+min_xy_shell+labelspace.y/2])
+ translate([-mount_screwhead_d/2-min_xy_shell-labelspace.x/2,-longwing+(st_split_w+st_split_w_tolerance)/2+min_xy_shell+labelspace.y/2])
mirror([left?0:1,0])
text(text=label,size=labelspace.x/label_len,halign="center",valign="center",font="Arial Black");
+ }//if(label_len)
}//difference
@@ -397,11 +400,11 @@ module the_extruder(
translate([0,0,h])
sphere(d=spring_d*3/4,$fn=fnd*spring_d*3/4);
l = body_h-ls_z;
- w = st_thinshell;
- hull() translate([0,-st_thinshell/2,0]) mirror([1,0,0]) {
+ w = st_split_w;
+ hull() translate([0,-st_split_w/2,0]) mirror([1,0,0]) {
translate([0,0,w])
- cube(size=[l,st_thinshell,w]);
- cube(size=[l-w,st_thinshell,2*w]);
+ cube(size=[l,st_split_w,w]);
+ cube(size=[l-w,st_split_w,2*w]);
}
}
translate([0,0,-epsilon])