-rw-r--r-- | another.scad | 1 |
1 files changed, 0 insertions, 1 deletions
diff --git a/another.scad b/another.scad index b2e6c74..2331003 100644 --- a/another.scad +++ b/another.scad @@ -136,376 +136,375 @@ module the_extruder( translate([0,0,protrusion_h]) { difference() { cylinder(d=bore_d,h=bore_l,$fn=30); translate([-bore_d/2-1,bore_dd-bore_d/2,-1]) cube([bore_d+2,bore_d/2,bore_l+2]); } translate([0,0,pulley_elevation]) { cylinder(d=pulley_d,h=pulley_h,$fn=30); translate([0,0,teeth_elevation]) { place_idler() { cylinder(d=idler_d,h=idler_h,center=true,$fn=30); cylinder(d=idler_screw_d,h=lever_thickness+2,center=true,$fn=30); }//place idler // filament path rotate([0,0,45]) { translate([pulley_d/2-idler_filament_offset,0,0]) rotate([90,0,0]) { cylinder(d=filament_d,h=gearbox_d,center=false,$fn=15); }//rotate translate translate([pulley_d/2+filament_offset,0,0]) rotate([-90,0,0]) { cylinder(d=filament_d,h=gearbox_d,center=false,$fn=15); translate([0,0,mount_d/sqrt(2)/2+mount_screw_d]) pushfit(pf); }//rotate translate }//rotate }//translate teeth }//translate pulley }//translate protrusion }//vitamins module lever() { translate([0,0,protrusion_h+pulley_elevation+teeth_elevation]) { difference() { union() { hull() { place_idler() cylinder(d=lsd,h=lever_thickness,center=true,$fn=60); translate([mount_d/2,0,0]) cylinder(d=lsd,h=lever_thickness,center=true,$fn=60); }//hull hull() { translate([mount_d/2,0,0]) cylinder(d=lsd,h=lever_thickness,center=true,$fn=60); translate([mount_d/2,-longwing,0]) rotate([0,90,0]) cylinder(d=lever_thickness,h=lsd,center=true,$fn=60); }//hull }//union // filament path place_idler() translate([-idler_d/2-idler_filament_offset,0,0]) rotate([90,0,0]) { mirror([0,1,0]) teardrop(d=filament_path_d,h=3*gearbox_d,center=true); translate([0,0, sqrt(2)*(mount_d-pulley_d+lsd)/2 ]) { cylinder(d1=filament_path_d,d2=2*filament_path_d, h=filament_path_d,$fn=2*filament_path_d*fnd); translate([0,0,filament_path_d-epsilon]) cylinder(d=2*filament_path_d,h=lsd*sqrt(2),$fn=2*filament_path_d*fnd); }//translate }//rotate translate place_idler // idler space and mounting hole place_idler() { difference() { cylinder(d=idler_d+idler_clearance*2,h=idler_h+idler_v_tolerance,center=true,$fn=60); if(supports) for(y=[-lsd/2+extrusion_width:(lsd-2*extrusion_width)/3:lsd/2-extrusion_width]) translate([-lsd/2-1,y-extrusion_width/2,-idler_h/2-idler_v_tolerance/2-1]) cube(size=[lsd+2,extrusion_width,idler_h+idler_v_tolerance+2]); } cylinder(d=idler_screw_d,h=lever_thickness+2,center=true,$fn=30); translate([0,0,lever_thickness/2-idler_screwhead_h]) cylinder(d=idler_screwhead_d,h=idler_screwhead_h+1,$fn=fnd*idler_screwhead_d); } // mounting screw hole translate([mount_d/2,0,0]) cylinder(d=mount_screw_d+mount_screw_d_tolerance,h=lever_thickness+2,center=true,$fn=fnd*mount_screw_d); // lever end translate([mount_d/2,0,0]) rotate([0,90,0]) { translate([0,-longwing,lsd/2]) finger_indent(d=lever_thickness-1,r=15); translate([0,-longwing,0]) mirror([0,0,1]) difference() { cylinder(d=spring_d+spring_d_clearance,h=lsd,$fn=fnd*(spring_d+spring_d_clearance)); sphere(d=spring_d*3/4,$fn=fnd*spring_d*3/4); } }//rotate-translate }//difference // bridging patch if(bridges) place_idler() translate([0,0,lever_thickness/2-mount_screwhead_h]) mirror([0,0,1]) cylinder(d=mount_screwhead_d,h=layer_height); }//translate }//lever module module body() { difference() { union() { cylinder(d=gearbox_d,h=body_h,$fn=fnd*gearbox_d); // spring tensioner part translate([-gearbox_d/2,0,0]) hull() { translate([0,-longwing,ls_z]) rotate([0,90,0]) cylinder(d=lever_thickness,h=fsw,$fn=fnd*lever_thickness); hh=body_h-ls_z; translate([0,0,ls_z]) mirror([0,1,0]) cube(size=[fsw,longwing+(st_thinshell+st_split_w_tolerance)/2+st_thickshell,body_h-ls_z]); hhh=ls_z; translate([0,0,0]) mirror([0,1,0]) cube(size=[fsw,longwing-hhh+lever_thickness/sqrt(2),hhh+lever_thickness/2]); }//hull translate // pushfit bracket translate([0,0,filament_elevation]) rotate([0,0,45]) translate([pulley_d/2+filament_offset,0,0]) rotate([-90,0,0]) translate([0,0,mount_d/sqrt(2)/2+mount_screw_d-gearbox_d/2/*TODO:*/]) { pfbl = pf_h(pf)+gearbox_d/2; //TODO: if(pf_smooth) { pfbd = pf_d(pf)+2*pf_shell; hull() { cylinder(d=pfbd,h=pfbl,$fn=pfbd*fnd); translate([-epsilon/2,0,0]) { cube(size=[epsilon,filament_elevation,pfbl-filament_elevation+pfbd/2]); mirror([0,1,0]) cube(size=[epsilon,body_h-filament_elevation,pfbl-body_h+filament_elevation+pfbd/2]); }//translate }//hull }else{ pfb2a = pf_d(pf)+2*pf_shell; pfba = pfb2a/2; pfbd = pfb2a/cos(30); pfbs = pfb2a*tan(30); cylinder(d=pfbd,h=pfbl,$fn=6); translate([-pfbs/2,0,0]) { hull() { translate([0,-pfba,0]) cube(size=[pfbs,pfb2a,pfbl]); cube(size=[pfbs,filament_elevation,pfbl-filament_elevation+pfba]); mirror([0,1,0]) cube(size=[pfbs,body_h-filament_elevation,pfbl-body_h+filament_elevation+pfba]); }//hull }//translate*/ }//if(pf_smooth) }//translate rotate translate rotate translate }//union (first child of difference) // protrusion translate([0,0,-1]) cylinder(d=protrusion_d+protrusion_tolerance_h,h=protrusion_h+protrusion_tolerance_v+1,$fn=fnd*(protrusion_d+protrusion_tolerance_h)); // mount screw holes for(zr=[0:90:359]) rotate([0,0,zr]) translate([mount_d/2,0,0]) { translate([0,0,mount_screw_l-mount_depth-(bridges?layer_height:-epsilon)]) mirror([0,0,1]) cylinder(d=mount_screw_d+mount_screw_d_tolerance, h=mount_screw_l-mount_depth+1, $fn=fnd*(mount_screw_d+mount_screw_d_tolerance)); translate([0,0,mount_screw_l-mount_depth]) cylinder(d=mount_screwhead_d,h=body_h+1,$fn=fnd*mount_screwhead_d); }//for // pushfit pf_offset = mount_d/sqrt(2)/2+mount_screw_d; translate([0,0,filament_elevation]) rotate([0,0,45]) translate([pulley_d/2+filament_offset,0,0]) rotate([-90,0,0]) translate([0,0,pf_offset]) rotate([0,0,180]) { pushfit(pf); mirror([0,0,1]) { fh = 1.5* (filament_guide_d-filament_path_d)/2; fo = pf_offset -filament_path_d /*(idler_d+idler_clearance)/2*/-fh; translate([0,0,-1]) teardrop(d=filament_guide_d,h=fo/2,angle=225); translate([0,0,-1]) teardrop(d=filament_path_d,h=gearbox_d/2+1,angle=-225); translate([0,0,fo+epsilon]) cylinder(d1=filament_path_d,d2=filament_guide_d,h=fh,$fn=fnd*filament_guide_d); }//mirror }//rotate translate rotate translate rotate translate // pulley cylinder(d=pulley_d+pulley_small_d_clearance,h=body_h+1,$fn=fnd*(pulley_d+pulley_d_clearance)); cylinder(d=pulley_d+pulley_d_clearance,ls_z-max(idler_h,filament_guide_d)/2,$fn=fnd*(pulley_d+pulley_d_clearance)); translate([0,0,ls_z-ls_h/2]) { // idler travel translate([mount_d/2,0,0]) rotate([0,0,45]) rotate_extrude(angle=90,$fn=fnr*(shortwing+(idler_d+idler_clearance)/2)) square([shortwing+(idler_d+idler_clearance)/2,ls_h]); // idler itself place_idler() cylinder(d=idler_d+idler_clearance,h=ls_h,$fn=fnd*(idler_d+idler_clearance)); // lever space - echo(atan(1-2*fsw/gearbox_d)); rotate([0,0,45]) rotate_extrude(angle=-135+max(atan(2*fsw/gearbox_d-1),atan(gearbox_d/mount_d-1))) square([gearbox_d/2+1,ls_h]); } // back side cutout // XXX: this is somewhat ugly and potentially bugged, // but I want to sleep. a0_ = atan( (mount_d/sqrt(2)/2+mount_screw_d+pf_h(pf)+gearbox_d/2) / ( pulley_d/2+filament_offset- (pf_d(pf)+2*pf_shell)/2/cos(30) ) ); a0 = -135 + ( (a0_>0) ? a0_ : 180+a0_ ); a1 = atan((longwing-lever_thickness/2)/(gearbox_d/2)); translate([0,0,ls_z]) difference() { rotate([0,0,-180+a0]) rotate_extrude(angle=a1-a0) translate([0,-ls_h/2]) square([sqrt(pow(gearbox_d/2,2)+pow(longwing-lever_thickness/2,2))+1, ls_h]); translate([-mount_d/2,0,0]) cylinder(d=gearbox_d-mount_d,h=ls_h+2,center=true,$fn=fnd*(gearbox_d-mount_d)); }//difference translate //translate([-mount_d/2,-longwing,filament_elevation]) if(!tensioner) /* XXX: this seems to be bullshit, but it's so old, that it's historical bullshit */ translate([mount_d/2,-longwing,filament_elevation]) rotate([0,-90,0]) difference() { cylinder(d=spring_d+spring_d_clearance,h=spring_lc+spring_dl,$fn=fnd*(spring_d+spring_d_clearance)); translate([0,0,spring_lc+spring_dl]) sphere(d=spring_d*3/4,$fn=fnd*spring_d*3/4); } // spring tensioner translate([-gearbox_d/2,-longwing,ls_z]) rotate([0,-90,0]) { if(!tensioner) finger_indent(d=lever_thickness-1,r=15); else { mirror([0,0,1]) { translate([0,0,st_thickshell]) hull() for(o=[0,spring_d]) translate([0,-o,0]) rotate([0,0,30]) cylinder(d=st_nut_d+st_nut_d_tolerance,h=st_nut_h+st_nut_h_tolerance,$fn=6); translate([0,0,-1]) cylinder(d=st_screw_d+st_screw_d_tolerance,h=fsw+2,$fn=fnd*(st_screw_d+st_screw_d_tolerance)); bigd = spring_d+spring_d_clearance; hf = (bigd-st_screw_d-st_screw_d_tolerance)/2; translate([0,0,st_thickshell+st_nut_h+st_nut_h_tolerance+st_thinshell-epsilon]) { cylinder(d1=st_screw_d+st_screw_d_tolerance,d2=bigd, h=hf+epsilon, $fn=fnd*bigd); translate([0,-(st_thinshell+st_split_w_tolerance)/2,0]) cube(size=[body_h-ls_z+1,st_thinshell+st_split_w_tolerance,fsw+1]); } translate([0,0,st_thickshell+st_nut_h+st_nut_h_tolerance+st_thinshell+hf-epsilon]) cylinder(d=bigd,h=fsw+1,$fn=fnd*bigd); } } } }//difference if(supports) intersection() { difference() { translate([0,0,ls_z-ls_h/2-epsilon]) cylinder(d=gearbox_d,h=ls_h+2*epsilon,$fn=fnd*gearbox_d); cylinder(d=pulley_d+pulley_d_clearance,h=body_h+1,$fn=fnd*(pulley_d+pulley_d_clearance)); } // supports // TODO: hardcoded stuff below… if(false) { // parallel for(y=[-gearbox_d:4:gearbox_d]) translate([0,y-extrusion_width/2,0]) cube(size=[gearbox_d,extrusion_width,body_h]); }else{ // radial for(zr=[-65:(65+50)/7:50]) rotate([0,0,zr]) translate([0,-extrusion_width/2,0]) cube(size=[gearbox_d,extrusion_width,body_h]); } } }//body module module springpad() { smalld=st_screw_d+st_screw_d_tolerance+min_xy_shell; bigd = spring_d+spring_d_clearance/2; hf = (bigd-smalld)/2; h = hf*3.5; translate([-gearbox_d/2+st_thickshell+st_nut_h+st_nut_h_tolerance+st_thinshell+1,-longwing,filament_elevation]) rotate([0,90,0]) difference() { union() { cylinder(d1=smalld,d2=bigd,h=hf,$fn=fnd*bigd); translate([0,0,hf-epsilon]) cylinder(d=bigd,h=h-hf,$fn=fnd*bigd); translate([0,0,h]) sphere(d=spring_d*3/4,$fn=fnd*spring_d*3/4); l = body_h-ls_z; w = st_thinshell; hull() translate([0,-st_thinshell/2,0]) mirror([1,0,0]) { translate([0,0,w]) cube(size=[l,st_thinshell,w]); cube(size=[l-w,st_thinshell,2*w]); } } translate([0,0,-epsilon]) cylinder(d=st_screw_d+st_screw_d_tolerance,h=2*hf+epsilon,$fn=fnd*(st_screw_d+st_screw_d_tolerance)); } } module knob() { ch = knob_indent_d/2; translate([0,0,body_h+epsilon]) { mirror([0,0,1]) translate([0,0,-epsilon]) { difference() { cylinder(d=pulley_d,h=knob_bore_l,$fn=fnd*pulley_d); translate([0,0,-1]) difference() { cylinder(d=bore_d+knob_bore_d_tolerance,h=knob_bore_l+2); translate([-bore_d/2-1,bore_dd-bore_d/2+knob_bore_d_tolerance/2,-1]) cube([bore_d+2,bore_d/2,knob_bore_l+4]); } } } difference() { union() { cylinder(d1=gearbox_d-2*ch,d2=gearbox_d,h=ch+epsilon,$fn=fnd*gearbox_d); translate([0,0,ch]) cylinder(d=gearbox_d,h=knob_h-2*ch+epsilon,$fn=fnd*gearbox_d); translate([0,0,knob_h-ch]) cylinder(d1=gearbox_d,d2=gearbox_d-2*ch,h=ch,$fn=fnd*gearbox_d); } for(a=[0:360/knob_indents:359]) rotate([0,0,a]) translate([0,gearbox_d/2,-1]) cylinder(d=knob_indent_d,h=knob_h+2,$fn=fnd*knob_indent_d); } } }//knob module module debug() { difference() { children(); if(debug) { // spring tensioner debug cutout if(tensioner) // TODO: collapse copypasted transformations translate([-gearbox_d/2,0,0]) translate([0,-longwing,ls_z]) rotate([0,-90,0]) translate([0,-lever_thickness/2-1,-gearbox_d]) cube(size=[body_h/2+1,lever_thickness/2+1,gearbox_d+2]); // lever axis debug cutout translate([mount_d/2,0,-1]) rotate([0,0,-45]) cube(size=[gearbox_d-mount_d,gearbox_d-mount_d,body_h+knob_h+2]); // idler debug cutout translate([0,0,ls_z]) place_idler() rotate([0,0,-45]) translate([0,0,-lever_thickness/2-epsilon]) cube(size=[(idler_d+idler_clearance)/2,(idler_d+idler_clearance)/2, lever_thickness+2*epsilon]); // pushfit debug cutout place_idler() translate([-idler_d/2+filament_offset,0,ls_z]) cube(size=[gearbox_d/2,gearbox_d/2+pf_h(pf),body_h-ls_z+1]); }//if debug }//difference } mirrorleft() debug() if(what=="lever") color("green",0.7) lever(); else if(what=="body") color("yellow",0.7) body(); else if(what=="knob") color("red",0.7) knob(); else if(what=="springpad") color("blue",0.7) springpad(); else if(what=="both") { color("green",0.7) lever(); color("yellow",0.7) body(); }else{ color("green",0.7) lever(); color("yellow",0.7) body(); color("red",0.7) knob(); color("blue",0.7) springpad(); } } the_extruder(what="*",left=false,debug=true); |