-rw-r--r-- | another.scad | 6 |
1 files changed, 3 insertions, 3 deletions
diff --git a/another.scad b/another.scad index 50b3a84..6afa9ef 100644 --- a/another.scad +++ b/another.scad @@ -21,65 +21,65 @@ module the_extruder( filament_offset = (8.25-(3.0+3.5)/2) - 11.5/2 + 1.75/2, // idler properties idler_d = 9.5, idler_h = 4, idler_id = 3, // idler dimensions: outer and inner diameters and height // spring properties spring_d = 10, spring_lc = 9.6, // spring diameter and compressed length // filament path properties filament_d = 1.75, filament_path_d = 2, filament_guide_d = 4, // PTFE filament guide diameter // knob properties knob_h = 10, knob_bore_l = 4, knob_indent_d = 4, knob_indents = 12, // spring tensioner st_nut_d = 9, st_nut_h = 4, st_screw_d = 5, st_thickshell = 8*extrusion_width, st_thinshell = 4*extrusion_width, // screw it mount_screw_d = 3.1, mount_screw_l = 20, mount_screwhead_d=6, mount_screwhead_h=3, idler_screw_d = 3, idler_screwhead_d=6, idler_screwhead_h=3, pf = pushfit_embeddest, pf_shell = max(3*layer_height,3*extrusion_width), pf_smooth = true, // empty spaces idler_travel = 3, // how far should idler travel when pressed idler_clearance=1, - pulley_clearance=2, + pulley_d_clearance=2, lever_v_clearance=.7, // vertical clearance for the lever spring_d_clearance=1, protrusion_tolerance_h=.5, // horizontal tolerance for the motor protrusion protrusion_tolerance_v=.5, // vertical tolerance for the motor protrusion mount_screw_d_tolerance=.4, idler_v_tolerance=.5, knob_bore_d_tolerance=.6, st_nut_h_tolerance=.2, st_nut_d_tolerance=.2,/* TODO: make it st_nut_w_tolerance */ st_screw_d_tolerance=.5, what="lever", // lever|body|knob|springpad|* left=false, vitamins = true, supports = false, bridges = true, tensioner = true, debug = false ) { fnd = 2*PI; fnr = 2*fnd; idler_filament_offset = filament_path_d/2; // -filament_offset; lever_shell = mount_screwhead_h+0.5; lever_thickness=max(spring_d+spring_d_clearance+layer_height*8,idler_h+idler_v_tolerance+2*lever_shell); lsd = idler_d-idler_clearance*2; longwing=gearbox_d/2+spring_d/2+lsd/2; h_ = (pulley_d+idler_d)/(2*sqrt(2)); ri = sqrt( pow(h_,2) + pow(mount_d/2-h_,2) ); spring_dl = idler_travel*longwing/ri; filament_elevation=protrusion_h+pulley_elevation+teeth_elevation; ls_z = filament_elevation; // leverspace mid-z body_h = max(protrusion_h+bore_l,mount_screw_l-mounthole_depth/2+mount_screwhead_h,ls_z*2); @@ -280,128 +280,128 @@ module the_extruder( }//hull }//translate*/ }//if(pf_smooth) }//translate rotate translate rotate translate }//union (first child of difference) // protrusion translate([0,0,-1]) cylinder(d=protrusion_d+protrusion_tolerance_h,h=protrusion_h+protrusion_tolerance_v+1,$fn=fnd*(protrusion_d+protrusion_tolerance_h)); // mount screw holes for(zr=[0:90:359]) rotate([0,0,zr]) translate([mount_d/2,0,0]) { translate([0,0,mount_screw_l-mounthole_depth/2-(bridges?layer_height:-epsilon)]) mirror([0,0,1]) cylinder(d=mount_screw_d+mount_screw_d_tolerance, h=mount_screw_l-mounthole_depth/2+1, $fn=fnd*(mount_screw_d+mount_screw_d_tolerance)); translate([0,0,mount_screw_l-mounthole_depth/2]) cylinder(d=mount_screwhead_d,h=body_h+1,$fn=fnd*mount_screwhead_d); }//for // pushfit translate([0,0,filament_elevation]) rotate([0,0,45]) translate([pulley_d/2+filament_offset,0,0]) rotate([-90,0,0]) translate([0,0,mount_d/sqrt(2)/2+mount_screw_d+epsilon]) rotate([0,0,180]) { pushfit(pf); cylinder(d=filament_guide_d,h=gearbox_d,center=true,$fn=fnd*filament_guide_d); translate([0,-filament_guide_d/2/sqrt(2),0]) rotate([0,0,45]) cube(size=[filament_guide_d/2,filament_guide_d/2,gearbox_d],center=true); }//rotate translate rotate translate rotate translate // pulley - cylinder(d=pulley_d+pulley_clearance,h=body_h+1,$fn=fnd*(pulley_d+pulley_clearance)); + cylinder(d=pulley_d+pulley_d_clearance,h=body_h+1,$fn=fnd*(pulley_d+pulley_d_clearance)); // leverspace hull() for(x=[0,gearbox_d]) rotate([0,0,45]) translate([x,0,ls_z-ls_h/2]) cylinder(d=idler_d+idler_clearance,h=ls_h,$fn=fnd*(idler_d+idler_clearance)); // idler clearance a=cos(45)*(pulley_d+idler_d)/2; b=mount_d/2-a; x=sqrt(pow(a,2)+pow(b,2)); translate([mount_d/2,0,ls_z]) intersection() { r = x+idler_d/2+idler_clearance; cylinder(r=r,h=ls_h,center=true); translate([-r-1,0,-ls_h/2-1]) cube(size=[2*r+2,r+1,ls_h+2]); } // back side cutout // XXX: this is somewhat ugly and potentially bugged, // but I want to sleep. a0_ = atan( (mount_d/sqrt(2)/2+mount_screw_d+pf_h(pf)+gearbox_d/2) / ( pulley_d/2+filament_offset- (pf_d(pf)+2*pf_shell)/2/cos(30) ) ); a0 = -135 + ( (a0_>0) ? a0_ : 180+a0_ ); a1 = atan((longwing-lever_thickness/2)/(gearbox_d/2)); translate([0,0,ls_z]) difference() { rotate([0,0,-180+a0]) rotate_extrude(angle=a1-a0) translate([0,-ls_h/2]) square([sqrt(pow(gearbox_d/2,2)+pow(longwing-lever_thickness/2,2))+1, ls_h]); translate([-mount_d/2,0,0]) cylinder(d=gearbox_d-mount_d,h=ls_h+2,center=true,$fn=fnd*(gearbox_d-mount_d)); }//difference translate rotate([0,0,-45]) translate([0,0,ls_z-ls_h/2]) cube(size=[gearbox_d,gearbox_d,lever_thickness+lever_v_clearance]); translate([0,0,ls_z-ls_h/2]) { translate([mount_screwhead_d/2,0,0]) mirror([0,1,0]) cube(size=[gearbox_d,gearbox_d/2+1,lever_thickness+lever_v_clearance]); } //translate([-mount_d/2,-longwing,filament_elevation]) if(!tensioner) /* XXX: this seems to be bullshit, but it's so old, that it's historical bullshit */ translate([mount_d/2,-longwing,filament_elevation]) rotate([0,-90,0]) difference() { cylinder(d=spring_d+spring_d_clearance,h=spring_lc+spring_dl,$fn=fnd*(spring_d+spring_d_clearance)); translate([0,0,spring_lc+spring_dl]) sphere(d=spring_d*3/4,$fn=fnd*spring_d*3/4); } }//difference if(supports) intersection() { difference() { translate([0,0,ls_z-ls_h/2-epsilon]) cylinder(d=gearbox_d,h=ls_h+2*epsilon,$fn=fnd*gearbox_d); - cylinder(d=pulley_d+pulley_clearance,h=body_h+1,$fn=fnd*(pulley_d+pulley_clearance)); + cylinder(d=pulley_d+pulley_d_clearance,h=body_h+1,$fn=fnd*(pulley_d+pulley_d_clearance)); } // supports // TODO: hardcoded stuff below… if(false) { // parallel for(y=[-gearbox_d:4:gearbox_d]) translate([0,y-extrusion_width/2,0]) cube(size=[gearbox_d,extrusion_width,body_h]); }else{ // radial for(zr=[-65:(65+50)/7:50]) rotate([0,0,zr]) translate([0,-extrusion_width/2,0]) cube(size=[gearbox_d,extrusion_width,body_h]); } } }//body module module springpad() { smalld=st_screw_d+st_screw_d_tolerance+2*extrusion_width; bigd = spring_d+spring_d_clearance/2; hf = (bigd-smalld)/2; translate([-gearbox_d/2+st_thickshell+st_nut_h+st_nut_h_tolerance+st_thinshell+1,-longwing,filament_elevation]) rotate([0,90,0]) difference() { union() { cylinder(d1=smalld,d2=bigd,h=hf,$fn=fnd*bigd); translate([0,0,hf-epsilon]) cylinder(d=bigd,h=hf*2,$fn=fnd*bigd); translate([0,0,3*hf]) sphere(d=spring_d*3/4,$fn=fnd*spring_d*3/4); } translate([0,0,-epsilon]) cylinder(d=st_screw_d+st_screw_d_tolerance,h=2*hf+epsilon,$fn=fnd*(st_screw_d+st_screw_d_tolerance)); } |