From 7fe5273a70a70beeba8ff622a7af1e2cfdf1a28f Mon Sep 17 00:00:00 2001
From: Michael Krelin <hacker@klever.net>
Date: Thu, 02 Aug 2018 19:29:40 +0000
Subject: cutout on the back side

in the unfortunate event of filament grinding it may serve as an
escape way for filament powder
---
diff --git a/another.scad b/another.scad
index 4af7d29..38a9aae 100644
--- a/another.scad
+++ b/another.scad
@@ -277,6 +277,19 @@ module the_extruder(
     cylinder(r=r,h=ls_h,center=true);
     translate([-r-1,0,-ls_h/2-1]) cube(size=[2*r+2,r+1,ls_h+2]);
    }
+
+   // back side cutout
+   a0 = asin((mount_screwhead_d+2*extrusion_width)/mount_d);
+   a1 = atan((longwing-lever_thickness/2)/(gearbox_d/2));
+   translate([0,0,ls_z]) hull() {
+    rotate([0,0,-180+a0])
+    rotate_extrude(angle=a1-a0)
+    translate([0,-ls_h/2])
+    square([sqrt(pow(gearbox_d/2,2)+pow(longwing-lever_thickness/2,2))+1,
+            ls_h]);
+    cylinder(d=bore_d/2/*TODO:recalculate angles based on this,
+                         too lazy to do that now*/,
+             h=ls_h,center=true);
    }
    
    rotate([0,0,-45])
--
cgit v0.9.0.2