From 461e05f32eacaffd4508abf2943fcad8d0c7d00d Mon Sep 17 00:00:00 2001
From: Michael Krelin <hacker@klever.net>
Date: Mon, 06 Feb 2017 21:20:07 +0000
Subject: knob

---
(limited to 'another.scad')

diff --git a/another.scad b/another.scad
index fa60676..9f42f46 100644
--- a/another.scad
+++ b/another.scad
@@ -32,6 +32,11 @@ module the_extruder(
  filament_d = 1.75,
  filament_path_d = 2,
  filament_guide_d = 4,				// PTFE filament guide diameter
+ // knob properties
+ knob_h = 10,
+ knob_bore_l = 4,
+ knob_indent_d = 4,
+ knob_indents = 12,
 
  // screw it
  mount_screw_d = 3, mount_screw_l = 20,
@@ -47,6 +52,7 @@ module the_extruder(
  protrusion_tolerance_v=.5,			// vertical tolerance for the motor protrusion
  mount_screw_d_tolerance=.5,
  idler_v_tolerance=.5,
+ knob_bore_d_tolerance=.6,
 
  what="lever",
  left=false,
@@ -292,13 +298,43 @@ module the_extruder(
   }
 
  }//body module
+
+ module knob() {
+  ch = knob_indent_d/2;
+  translate([0,0,body_h+epsilon]) {
+   mirror([0,0,1]) translate([0,0,-epsilon]) {
+    difference() {
+     cylinder(d=pulley_d,h=knob_bore_l,$fn=pulley_d*PI*2);
+     translate([0,0,-1]) difference() {
+      cylinder(d=bore_d+knob_bore_d_tolerance,h=knob_bore_l+2);
+      translate([-bore_d/2-1,bore_dd-bore_d/2+knob_bore_d_tolerance/2,-1])
+      cube([bore_d+2,bore_d/2,knob_bore_l+4]);
+     }
+    }
+   }
+   difference() {
+    union() {
+     cylinder(d1=gearbox_d-2*ch,d2=gearbox_d,h=ch+epsilon,$fn=PI*gearbox_d*2);
+     translate([0,0,ch])
+     cylinder(d=gearbox_d,h=knob_h-2*ch+epsilon,$fn=PI*gearbox_d*2);
+     translate([0,0,knob_h-ch])
+     cylinder(d1=gearbox_d,d2=gearbox_d-2*ch,h=ch,$fn=PI*gearbox_d*2);
+    }
+    for(a=[0:360/knob_indents:359]) rotate([0,0,a])
+     translate([0,gearbox_d/2,-1])
+     cylinder(d=knob_indent_d,h=knob_h+2,$fn=knob_indent_d*PI*2);
+   }
+  }
+ }//knob module
  
  mirrorleft()
  if(what=="lever") color("green",0.7) lever();
  else if(what=="body") color("yellow",0.7) body();
- else if(what=="both") {
+ else if(what=="knob") color("red",0.7) knob();
+ else if(what=="both" || what=="*") {
   color("green",0.7) lever();
   color("yellow",0.7) body();
+  color("red",0.7) knob();
  }
 }
 
--
cgit v0.9.0.2