From 4b1f3dfe12ef5357fa28caa2c5265c88bd51a864 Mon Sep 17 00:00:00 2001
From: Michael Krelin <hacker@klever.net>
Date: Tue, 31 Jul 2018 19:54:10 +0000
Subject: preprocess multiswitch for customizer.

no, this is not seriously useful preprocessor, but works for this case.
real men don't use customizer anyway.
---
(limited to 'multiswitch-c8r.scad')

diff --git a/multiswitch-c8r.scad b/multiswitch-c8r.scad
new file mode 100644
index 0000000..a6a5dbb
--- a/dev/null
+++ b/multiswitch-c8r.scad
@@ -0,0 +1,25 @@
+
+// Well, you can go higher, but that would probably be ridiculous
+number_of_inputs = 4; // [2,3,4,5,6];
+// Pushfit types are e3d threaded pusfit, e3d embedded and printed ring with only the collet put into it. Note, that rendering 4 threaded pushfit sockets borders with impossible, and it's too big, anyway.
+pushfit_type = "embeddest"; // ["threaded","embedded","embeddest"]
+join_angle = 15;
+
+// Outer diameter of PTFE liner
+liner_outer_diameter = 4;
+// Inner diameter of PTFE liner and the diameter of printed filament channel
+liner_inner_diameter = 2;
+
+module customizer_multiswitch() {
+ multiswitch(
+  liner_od = liner_outer_diameter,
+  liner_id = liner_inner_diameter,
+  angle = join_angle,
+  inputs = number_of_inputs,
+  pf = pf_byname(stock_pushfits,pushfit_type),
+  draft = false,
+  print = true,
+  debug = 0
+ );
+}
+customizer_multiswitch();
--
cgit v0.9.0.2