author | Michael Krelin <hacker@klever.net> | 2016-06-11 13:58:06 (UTC) |
---|---|---|
committer | Michael Krelin <hacker@klever.net> | 2016-06-11 13:58:06 (UTC) |
commit | 81e4c02f584b5404628cda56502d0eedbc93b8f1 (patch) (unidiff) | |
tree | bec4d3946792e8f279508e2b48b7092d72da6829 | |
parent | 386ace1e4c55753b4bda2b674e34005d3c1f01e4 (diff) | |
download | fanductory-81e4c02f584b5404628cda56502d0eedbc93b8f1.zip fanductory-81e4c02f584b5404628cda56502d0eedbc93b8f1.tar.gz fanductory-81e4c02f584b5404628cda56502d0eedbc93b8f1.tar.bz2 |
make hotend clearance as big as heater clearance
-rw-r--r-- | fanduct.scad | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/fanduct.scad b/fanduct.scad index 975f1cc..53630a3 100644 --- a/fanduct.scad +++ b/fanduct.scad | |||
@@ -16,25 +16,25 @@ fanduct_blowtarget = -2; // what to blow at | |||
16 | fanduct_h = 6; // inner height of the duct | 16 | fanduct_h = 6; // inner height of the duct |
17 | fanduct_w = 7; // inner width of the duct | 17 | fanduct_w = 7; // inner width of the duct |
18 | fanduct_shell=1.2; // shell thickness | 18 | fanduct_shell=1.2; // shell thickness |
19 | fanduct_ir = heater_clearance+5; // inner radius | 19 | fanduct_ir = heater_clearance+5; // inner radius |
20 | 20 | ||
21 | jet_angle = 60-2; // angular width of the jet | 21 | jet_angle = 60-2; // angular width of the jet |
22 | 22 | ||
23 | inlet_w = 12.5; // inlet width | 23 | inlet_w = 12.5; // inlet width |
24 | inlet_h = 17; // inlet height | 24 | inlet_h = 17; // inlet height |
25 | inlet_l = 7; // inlet length of protrusion (or depth of intrusion:)) | 25 | inlet_l = 7; // inlet length of protrusion (or depth of intrusion:)) |
26 | inlet_away = 15;// how far away inlet is | 26 | inlet_away = 15;// how far away inlet is |
27 | 27 | ||
28 | hotend_clearance = 12; | 28 | hotend_clearance = heater_clearance; |
29 | 29 | ||
30 | snapper_d = 8; snapper_overlap=0.2;// snip snap | 30 | snapper_d = 8; snapper_overlap=0.2;// snip snap |
31 | 31 | ||
32 | smooth_f = 120; | 32 | smooth_f = 120; |
33 | 33 | ||
34 | type="3jets"; // "3jets" ; // circular|3jets | 34 | type="3jets"; // "3jets" ; // circular|3jets |
35 | 35 | ||
36 | 36 | ||
37 | module fanduct(type=type) { | 37 | module fanduct(type=type) { |
38 | 38 | ||
39 | // ***duct is all around! | 39 | // ***duct is all around! |
40 | module duct(what) { | 40 | module duct(what) { |