more advanced chimera hotend

1 files changed, 74 insertions, 1 deletions

diff --git a/fanduct.scad b/fanduct.scad
index ba63717..2bc5623 100644
--- a/fanduct.scad
+++ b/fanduct.scad
@@ -135,10 +135,45 @@ module fanduct(type=type,ductshape=ductshape,dual=dual) {
     cylinder(d=sh,h=sv,$fn=36);
    }
   }
+  module dual_complex() {
+   for(my=[0,1]) mirror([0,my,0])
+    if(what=="in") {
+     sh = fanduct_w+2*fanduct_shell;
+     sv = fanduct_h+2*fanduct_shell;
+     for(mx=[0,1]) mirror([mx,0,0])
+     mirror([0,1,0]) rotate([90,0,0])
+     translate([0,0,-1])
+     linear_extrude(height=nozzles_apart/2+1+epsilon)
+     ductshape(sh=sh,sv=sv,r=fanduct_ir,what=what);
+     translate([0,nozzles_apart/2,0])
+     difference() {
+      rotate_extrude($fn=smooth_f)
+      ductshape(sh=sh,sv=sv,r=fanduct_ir,what=what);
+      mirror([0,1,0]) translate([-fanduct_ir-sh-1,0,-1])
+      cube(size=[2*(fanduct_ir+sh+1),fanduct_ir+sh+1,sv+2]);
+     }
+    }else{
+     sh = fanduct_w; sv = fanduct_h;
+     for(mx=[0,1]) mirror([mx,0,0])
+     mirror([0,1,0]) rotate([90,0,0])
+     translate([0,0,-1])
+     linear_extrude(height=nozzles_apart/2+1+epsilon)
+     ductshape(sh=sh,sv=sv,r=fanduct_ir,what=what);
+     translate([0,nozzles_apart/2,0])
+     difference() {
+      rotate_extrude($fn=smooth_f)
+      ductshape(sh=sh,sv=sv,r=fanduct_ir,what=what);
+      mirror([0,1,0]) translate([-fanduct_ir-sh-1,0,-1])
+      cube(size=[2*(fanduct_ir+sh+1),fanduct_ir+sh+1,sv+2]);
+     }
+    }
+  }
 
   if(dual) {
    if(type=="simple")
     dual_simple();
+   else if(type=="jets")
+    dual_complex();
    else dual();
   }else single();
  }
@@ -289,6 +324,43 @@ module fanduct(type=type,ductshape=ductshape,dual=dual) {
    }
   }
 
+  module dual_jets(what=what) {
+   od=fanduct_h*2/3+fanduct_shell;
+   md=fanduct_ir+fanduct_shell+fanduct_w/2;
+   jww = 2*md*sin(jet_angle/2);
+   difference() {
+    for(my=[0,1]) mirror([0,my,0])
+    translate([0,nozzles_apart/2,0])
+    for(a=[45,135]) rotate([0,0,a])
+    if(what=="in") {
+     hull() {
+      intersection() {
+       translate([md-fanduct_w/2,-jww/2,0])
+       cube(size=[fanduct_shell+fanduct_w/2,jww,od]);
+       rotate([0,0,-a]) translate([0,-nozzles_apart/2,0]) duct(what=what);
+      } // intersection
+      translate([0,0,-fanduct_elevation]) sphere(r=.5);
+     } // hull
+    }else if(what=="out") {
+     hull() {
+      intersection() {
+       translate([md-fanduct_w/2,-jww/2+fanduct_shell,fanduct_shell])
+       cube(size=[fanduct_w/2,jww-2*fanduct_shell,od-2*fanduct_shell]);
+       rotate([0,0,-a]) translate([0,-nozzles_apart/2,0]) duct(what=what);
+      } // intersection
+      translate([0,0,-fanduct_elevation]) sphere(r=.5);
+     } // hull
+    } // what=="out"
+    if(what=="in") {
+     translate([0,0,-fanduct_elevation/2-1+epsilon])
+     cube(size=[2*(fanduct_ir+2*fanduct_shell+fanduct_w+1),nozzles_apart+2*(fanduct_ir+2*fanduct_shell+fanduct_w+1),fanduct_elevation+2],center=true);
+     for(my=[0,1]) mirror([0,my,0])
+      translate([0,nozzles_apart/2,-hotend_clearance])
+      cylinder(r1=hotend_clearance*2,r2=0,h=hotend_clearance*2,$fn=4);
+    }
+   } // difference
+  }
+
   module dual_simple(what=what) {
    for(my=[0:1]) mirror([0,my,0]) if(what=="in") {
     difference() {
@@ -313,6 +385,7 @@ module fanduct(type=type,ductshape=ductshape,dual=dual) {
 
   if(dual) {
    if(type=="simple") dual_simple(what);
+   else if(type=="jets") dual_jets(what);
    else dual(what);
   }else if(type=="circular") circus(what);
   else if(type=="3jets") jets(what);
@@ -364,7 +437,7 @@ module fanduct(type=type,ductshape=ductshape,dual=dual) {
 
          //     ***DUCT TAILS!!! WOO-OO! (every day they're out there making duct tails…)
  module tails(what) {
-  if(dual) {
+  if(dual && type=="simple") {
    // XXX: not sure if it will ever be
   }else{
    if(what=="in") {