initial import

1 files changed, 241 insertions, 0 deletions

diff --git a/fanduct.scad b/fanduct.scad
new file mode 100644
index 0000000..d711166
--- a/dev/null
+++ b/fanduct.scad
@@ -0,0 +1,241 @@
+use <snapper.scad>;
+extrusion_width=.5; layer_height=.2;		// print parameters
+
+epsilon=.005;		// for finer cuts
+
+heater_w = 16;		// heatblock width
+heater_l = 20;		// heatblock length
+nozzle_offset=4.5;	// nozzle offset from the edge of heatblock
+
+fanduct_elevation = 3;							// fanduct elevation above nozzle tip
+fanduct_h = 6;								// inner height of the duct
+fanduct_w = 6;								// inner width of the duct
+fanduct_shell=1.2;							// shell thickness
+fanduct_ir = sqrt(pow(heater_w/2,2)+pow(heater_l-nozzle_offset,2))+5;	// inner radius
+
+jet_angle = 60;		// angular width of the jet
+
+inlet_w = 12.5;		// inlet width
+inlet_h = 17;		// inlet height
+inlet_l = 7;		// inlet length of protrusion (or depth of intrusion:))
+inlet_away = 15;	// how far away inlet is
+
+hotend_clearance = 12;
+
+snapper_d = 8; snapper_overlap=0.2;	// snip snap
+
+smooth_f = 120;
+
+type="3jets"; // "3jets" ; // circular|3jets
+
+
+module fanduct(type=type) {
+
+ //	***	duct is all around!
+ module duct(what) {
+  if(what=="in") {
+   rotate_extrude($fn=smooth_f)
+   translate([fanduct_ir,0])
+   square([fanduct_w+2*fanduct_shell,fanduct_h+2*fanduct_shell]);
+  }else if(what=="out") {
+   rotate_extrude($fn=smooth_f)
+   translate([fanduct_ir+fanduct_shell,fanduct_shell])
+   union() {
+    square([fanduct_w,fanduct_h/2]);
+    translate([fanduct_w/2,fanduct_h-fanduct_w/2])
+    rotate([0,0,90]) circle(d=fanduct_w,$fn=36);
+   } 
+  }
+ }
+
+ //	***	bumps for easier position adjustments in line with hotend
+ module marks(what) {
+  if(what=="in") {
+   for(y=[-1,1]) translate([0,y*(fanduct_ir+fanduct_shell+fanduct_w/2),fanduct_shell*2+fanduct_h])
+   rotate([90,0,0]) {
+    cylinder(r=fanduct_shell,h=fanduct_w,center=true,$fn=30);
+    for(z=[-1,1]) translate([0,0,z*fanduct_w/2])
+     sphere(r=fanduct_shell,$fn=30);
+   }
+  }
+ }
+
+ //	***	output
+ module output(what,type=type) {
+  module guideline(xyxy) {
+   module pin(xy) {
+    translate([xy[0],xy[1],0])
+    cylinder(d=2*extrusion_width,h=2*fanduct_shell+inlet_h,$fn=6);
+   }
+   xyxyxy=concat(xyxy,[[0,0]]);
+   for(i=[0:1:len(xyxyxy)-2])
+    hull() for(j=[i,i+1]) pin(xyxyxy[j]);
+  }
+
+  module circus(what) {
+   if(what=="in") {
+    difference() {
+     rotate_extrude($fn=smooth_f)
+      polygon([
+       [0,-fanduct_elevation],
+       [fanduct_ir+fanduct_shell,fanduct_shell+fanduct_h/2],
+       [fanduct_ir+fanduct_shell,0],
+       [0,-fanduct_elevation-.1]]);
+     translate([0,0,-1])
+     cylinder(r=hotend_clearance,h=fanduct_h+2*fanduct_shell+2,$fn=smooth_f);
+     mirror([0,0,1])
+     translate([0,0,-epsilon])
+     cylinder(r=fanduct_ir+fanduct_shell+1,h=fanduct_elevation+.1+2);
+    }
+   }else if(what=="out") {
+    difference() {
+     rotate_extrude($fn=smooth_f)
+     polygon([
+      [0,-fanduct_elevation],
+      [fanduct_ir+fanduct_shell+1,fanduct_h/2],
+      [fanduct_ir+fanduct_shell+1,fanduct_shell],
+      [0,-fanduct_elevation-.1]]);
+     circus("airguides");
+    }
+   }else if(what=="airguides") {
+    inr = fanduct_ir+fanduct_shell; our = inr+fanduct_w;
+    union() {
+     for(my=[0,1]) mirror([0,my,0]) {
+      guideline([
+       [-our,inlet_w/6],
+       [-inr*sin(60),inr*cos(60)]
+      ]);
+      a0=30; as=15; a1=180;
+      for(a=[a0+as:as:a1]) {
+       f = as/(a1-a+as);
+       rotate([0,0,a]) guideline([[-inr-fanduct_w*f,0]]);
+      }
+      guideline([
+       [-our+fanduct_w*cos(30)*3/4,fanduct_w*sin(30)*3/4],
+       [-inr*cos(10),inr*sin(10)]
+      ]);
+     }
+    }/*union*/
+   }/*airguides*/
+  }
+
+  module jets(what) {
+   od = fanduct_h/2+fanduct_shell;
+   difference() {
+    for(a=[0:120:359]) rotate([0,0,a]) {
+     if(what=="in") {
+      hull() {
+       translate([fanduct_ir+od/2,0,od/2])
+       rotate([90,0,0])
+       cylinder(d=od,h=2*(fanduct_ir+fanduct_shell+fanduct_w/2)*sin(jet_angle/2)-3,center=true,$fn=36);
+       translate([0,0,-fanduct_elevation]) sphere(r=.5);
+      }
+     }else if(what=="out") {
+      hull() {
+       translate([fanduct_ir+od/2,0,od/2])
+       rotate([90,0,0])
+       cylinder(d=od-2*fanduct_shell,h=2*(fanduct_ir+fanduct_shell+fanduct_w/2)*sin(jet_angle/2)-3-2*fanduct_shell,center=true);
+       translate([0,0,-fanduct_elevation]) sphere(r=.2);
+      }
+
+      type="3jets";
+     }
+    }
+    if(what=="in") {
+     translate([0,0,-fanduct_elevation-2+epsilon])
+     cylinder(r=fanduct_ir+fanduct_shell*2+fanduct_w+1,h=fanduct_elevation+2);
+     translate([0,0,-hotend_clearance])
+     rotate([0,0,30])
+     cylinder(r1=hotend_clearance*2,r2=0,h=hotend_clearance*2,$fn=6);
+    }
+   }
+  }
+
+  if(type=="circular") circus(what);
+  else if(type=="3jets") jets(what);
+ }
+
+ //	***	air intake
+ module intake(what) {
+  module placeit() {
+   translate([-fanduct_ir-2*fanduct_shell-fanduct_w-inlet_away,0,fanduct_shell])
+   rotate([0,-90,0])
+   children();
+  }
+  if(what=="in") {
+   placeit() translate([0,-inlet_w/2,0]) {
+    cube(size=[inlet_h,inlet_w,inlet_l+fanduct_shell]);
+    // supports
+    for(i=[-1,0,1])
+     translate([-fanduct_shell,
+      (i+1)*(inlet_w-extrusion_width)/2,
+     -inlet_away-fanduct_w/2])
+     cube(size=[fanduct_shell,
+      extrusion_width,
+      inlet_l+fanduct_shell+inlet_away+fanduct_w/2]);
+   }
+   hull() {
+    placeit() translate([-fanduct_shell,-inlet_w/2-fanduct_shell/2,0])
+    cube(size=[inlet_h+fanduct_shell,inlet_w+fanduct_shell,fanduct_shell]);
+    translate([-fanduct_ir-fanduct_shell-fanduct_w/2,0,0])
+    translate([0,-inlet_w/2-fanduct_shell/2,0])
+    cube(size=[1,inlet_w+fanduct_shell,fanduct_shell*2+fanduct_h]);
+   }
+  }else if(what=="out") {
+   placeit() translate([fanduct_shell,-inlet_w/2+fanduct_shell,0])
+   cube(size=[inlet_h-2*fanduct_shell,inlet_w-2*fanduct_shell,inlet_l+fanduct_shell+1]);
+   hull() {
+    placeit() translate([fanduct_shell,-inlet_w/2+fanduct_shell,0])
+    cube(size=[inlet_h-2*fanduct_shell,inlet_w-2*fanduct_shell,fanduct_shell]);
+    translate([-fanduct_ir-fanduct_shell-fanduct_w/2,0,fanduct_shell])
+    translate([0,-inlet_w/2,0])
+    cube(size=[1,inlet_w,fanduct_h]);
+   }
+  }
+ }
+
+ //	***	DUCT TAILS!!! WOO-OO! (every day they're out there making duct tails…)
+ module tails(what) {
+  if(what=="in") {
+   for(mx=[0,1]) mirror([mx,0,0])
+   translate([fanduct_ir+fanduct_shell+fanduct_w/2,0,fanduct_shell+fanduct_h])
+   rotate([90,0,90])
+   translate([0,0,-snapper_d/2])
+   snapper(d=snapper_d,o=snapper_overlap,side=0,l=fanduct_h+fanduct_shell);
+  }
+ }
+
+ module parts(what) {
+  union() {
+   duct(what);
+   marks(what);
+   output(what);
+   intake(what);
+   tails(what);
+  }
+ }
+
+ difference() {
+  parts("in");
+  parts("out");
+ }
+ 
+}
+
+view=""; // hcut|vcut|*
+
+hinfinity=4*(fanduct_ir+fanduct_shell*2+fanduct_w+inlet_away);
+vinfinity=2*(fanduct_shell*2+fanduct_h+inlet_h);
+if(view=="hcut") {
+ difference() {
+  fanduct();
+  translate([-hinfinity/2,-hinfinity/2,fanduct_shell+fanduct_h/2])
+  cube(size=[hinfinity,hinfinity,vinfinity]);
+ }
+}else if(view=="vcut") {
+ difference() {
+  fanduct();
+  translate([-hinfinity/2,0,-vinfinity/2])
+  cube(size=[hinfinity,hinfinity,vinfinity]);
+ }
+}else fanduct();