-rw-r--r-- | fanduct.scad | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/fanduct.scad b/fanduct.scad index 2bc5623..efc6a19 100644 --- a/fanduct.scad +++ b/fanduct.scad @@ -1,18 +1,18 @@ use <snapper.scad>; extrusion_width=.5; layer_height=.2; // print parameters epsilon=.005; // for finer cuts -type="simple"; // circular|3jets +type="jets"; // jets|circular|simple ductshape="square"; // square|round dual=true; // dual or single nozzles_apart = 18; // distance between nozzles for dual hotend space_behind_nozzle = 10; // space behind the nozzle where we're allowed to go // without the fear of hitting carriage inlet_w = 12.5; // inlet width inlet_h = 17; // inlet height inlet_short_l = 7; // inlet length of protrusion (or depth of intrusion:)) inlet_away = 15; // how far away inlet is @@ -379,25 +379,25 @@ module fanduct(type=type,ductshape=ductshape,dual=dual) { cylinder(d=fanduct_w,h=fanduct_h*2/3); translate([0,nozzles_apart/2,-fanduct_elevation+fanduct_blowtarget]) rotate([0,90,0]) cylinder(d=.5,h=fanduct_w*2,center=true); } } } if(dual) { if(type=="simple") dual_simple(what); else if(type=="jets") dual_jets(what); else dual(what); }else if(type=="circular") circus(what); - else if(type=="3jets") jets(what); + else if(type=="jets") jets(what); } // *** air intake module intake(what) { module placeit() { translate([-fanduct_ir-2*fanduct_shell-fanduct_w-inlet_away,0,fanduct_shell]) rotate([0,-90,0]) children(); } if(what=="in") { placeit() translate([0,-inlet_w/2,0]) { difference() { |