| -rw-r--r-- | fanduct.scad | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/fanduct.scad b/fanduct.scad index 2bc5623..efc6a19 100644 --- a/fanduct.scad +++ b/fanduct.scad @@ -1,102 +1,102 @@ use <snapper.scad>; extrusion_width=.5; layer_height=.2; // print parameters epsilon=.005; // for finer cuts -type="simple"; // circular|3jets +type="jets"; // jets|circular|simple ductshape="square"; // square|round dual=true; // dual or single nozzles_apart = 18; // distance between nozzles for dual hotend space_behind_nozzle = 10; // space behind the nozzle where we're allowed to go // without the fear of hitting carriage inlet_w = 12.5; // inlet width inlet_h = 17; // inlet height inlet_short_l = 7; // inlet length of protrusion (or depth of intrusion:)) inlet_away = 15; // how far away inlet is inlet_long_l = inlet_short_l+inlet_h; function hypothenuse(a,b) = sqrt(pow(a,2)+pow(b,2)); silicone_shell = 2; heater_clearance = dual ? max(20,15.5) - 4.5 + silicone_shell : max( hypothenuse(16/2 +silicone_shell, 20-4.5 +silicone_shell), // E3D v6 hypothenuse(11.5-4.5 +silicone_shell, 15.5 +silicone_shell) // E3D volcano ); fanduct_elevation = 3; // fanduct elevation above nozzle tip fanduct_blowtarget = -2; // what to blow at fanduct_h = 6; // inner height of the duct fanduct_w = 7; // inner width of the duct fanduct_shell=1.2; // shell thickness fanduct_ir = heater_clearance+5; // inner radius jet_angle = 60-2; // angular width of the jet hotend_clearance = heater_clearance; snapper_d = 8; snapper_overlap=0.2; // snip snap draft=true; smooth_f = draft? 30 : 120; to_midduct = fanduct_ir+fanduct_shell+fanduct_w/2; dual_spots = [ [+space_behind_nozzle, -(to_midduct+nozzles_apart/2)], [- to_midduct, -(to_midduct+nozzles_apart/2)], [- to_midduct, 0] ]; module fanduct(type=type,ductshape=ductshape,dual=dual) { // *** duct is all around! module duct(what) { module ductshape(what,sh,sv,r) { smax = max(sh,sv); translate([what=="in"?0:fanduct_shell,what=="in"?0:fanduct_shell]) if(ductshape=="round") { translate([sh/2+r,sv/2]) scale([sh/smax,sv/smax]) circle(d=smax,$fn=4*smax); }else if(ductshape=="square") { translate([r,0]) if(what=="in") square([sh,sv]); else if(what=="out") union() { square([sh,sv/2]); translate([sh/2,sv/2]) scale([sh/smax,sv/smax]) circle(d=smax,$fn=4*smax); } } } module single() { if(what=="in") { sh = fanduct_w+2*fanduct_shell; sv = fanduct_h+2*fanduct_shell; rotate_extrude($fn=smooth_f) ductshape(what=what,sh=sh,sv=sv,r=fanduct_ir); }else if(what=="out") { sh = fanduct_w; sv = fanduct_h; smax = max(sh,sv); rotate_extrude($fn=smooth_f) ductshape(what=what,sh=sh,sv=sv,r=fanduct_ir); } } module dual() { module hulls(spots=dual_spots) { for(my=[0,1]) mirror([0,my,0]) for(pn=[0:1:len(spots)-2]) hull() { for(p=[spots[pn],spots[pn+1]]) translate(p) children(); } } if(what=="in") { hulls() cylinder(d=fanduct_w+2*fanduct_shell,h=fanduct_h+2*fanduct_shell); }else if(what=="out") { sh = fanduct_w; sv = fanduct_h; smax = max(sh,sv); translate([0,0,fanduct_shell]) hulls() { cylinder(d=fanduct_w,h=fanduct_h/2); translate([0,0,fanduct_h/2]) scale([sh/smax,sh/smax,sv/smax]) intersection() { sphere(d=smax,$fn=36); @@ -295,193 +295,193 @@ module fanduct(type=type,ductshape=ductshape,dual=dual) { cfn= 4; // clearance cutout $fn difference() { hulls() { cylinder(d=fanduct_w+2*fanduct_shell,h=2*fanduct_shell+fanduct_h/2); translate([0,-nozzles_apart/2,-fanduct_elevation-fanduct_blowtarget]) sphere(d=.1); } translate([0,0,epsilon]) hull() for(my=[0:1]) mirror([0,my,0]) for(s=dual_spots) translate(s) mirror([0,0,1]) cylinder(d=fanduct_w+2*fanduct_shell+2,h=fanduct_elevation-fanduct_blowtarget+1); for(s=[-1,1]) translate([0,s*nozzles_apart/2,-1]) rotate([0,0,180/cfn]) cylinder(r=hotend_clearance/cos(180/cfn),h=fanduct_h+2*fanduct_shell+2,$fn=cfn); } }else if(what=="out") { hulls() { translate([0,0,fanduct_shell]) cylinder(d=fanduct_w,h=fanduct_h/2-fanduct_shell/2); translate([0,-nozzles_apart/2,-fanduct_elevation+fanduct_blowtarget]) sphere(d=.1); } }else if(what=="airguides") { far = fanduct_ir+fanduct_shell+fanduct_w; near = fanduct_ir; union() { for(my=[0,1]) mirror([0,my,0]) { guideline([ [-far ,0], [0, nozzles_apart/8] ]); guideline([ [-far ,inlet_w/2/4 ], [-near ,to_midduct/2] ]); guideline([ [-near-fanduct_w/3, to_midduct/2 ], [-near ,nozzles_apart/2+near ] ]); guideline([ [0 ,nozzles_apart/2+near+fanduct_w*space_behind_nozzle/to_midduct] ]); } } } } module dual_jets(what=what) { od=fanduct_h*2/3+fanduct_shell; md=fanduct_ir+fanduct_shell+fanduct_w/2; jww = 2*md*sin(jet_angle/2); difference() { for(my=[0,1]) mirror([0,my,0]) translate([0,nozzles_apart/2,0]) for(a=[45,135]) rotate([0,0,a]) if(what=="in") { hull() { intersection() { translate([md-fanduct_w/2,-jww/2,0]) cube(size=[fanduct_shell+fanduct_w/2,jww,od]); rotate([0,0,-a]) translate([0,-nozzles_apart/2,0]) duct(what=what); } // intersection translate([0,0,-fanduct_elevation]) sphere(r=.5); } // hull }else if(what=="out") { hull() { intersection() { translate([md-fanduct_w/2,-jww/2+fanduct_shell,fanduct_shell]) cube(size=[fanduct_w/2,jww-2*fanduct_shell,od-2*fanduct_shell]); rotate([0,0,-a]) translate([0,-nozzles_apart/2,0]) duct(what=what); } // intersection translate([0,0,-fanduct_elevation]) sphere(r=.5); } // hull } // what=="out" if(what=="in") { translate([0,0,-fanduct_elevation/2-1+epsilon]) cube(size=[2*(fanduct_ir+2*fanduct_shell+fanduct_w+1),nozzles_apart+2*(fanduct_ir+2*fanduct_shell+fanduct_w+1),fanduct_elevation+2],center=true); for(my=[0,1]) mirror([0,my,0]) translate([0,nozzles_apart/2,-hotend_clearance]) cylinder(r1=hotend_clearance*2,r2=0,h=hotend_clearance*2,$fn=4); } } // difference } module dual_simple(what=what) { for(my=[0:1]) mirror([0,my,0]) if(what=="in") { difference() { hull() { translate([0,nozzles_apart/2+fanduct_ir+fanduct_shell+fanduct_w/2,0]) cylinder(d=fanduct_w+2*fanduct_shell,h=fanduct_h*2/3+2*fanduct_shell); translate([0,nozzles_apart/2,-fanduct_elevation+fanduct_blowtarget]) rotate([0,90,0]) cylinder(r=.5,h=fanduct_w*2,center=true); } rr = 2*(fanduct_ir+fanduct_shell*2+fanduct_w+2); translate([-rr/2,0,0]) mirror([0,0,1]) cube(size=[rr,rr,rr]); } }else if(what=="out") { hull() { translate([0,nozzles_apart/2+fanduct_ir+fanduct_shell+fanduct_w/2,fanduct_shell]) cylinder(d=fanduct_w,h=fanduct_h*2/3); translate([0,nozzles_apart/2,-fanduct_elevation+fanduct_blowtarget]) rotate([0,90,0]) cylinder(d=.5,h=fanduct_w*2,center=true); } } } if(dual) { if(type=="simple") dual_simple(what); else if(type=="jets") dual_jets(what); else dual(what); }else if(type=="circular") circus(what); - else if(type=="3jets") jets(what); + else if(type=="jets") jets(what); } // *** air intake module intake(what) { module placeit() { translate([-fanduct_ir-2*fanduct_shell-fanduct_w-inlet_away,0,fanduct_shell]) rotate([0,-90,0]) children(); } if(what=="in") { placeit() translate([0,-inlet_w/2,0]) { difference() { cube(size=[inlet_h,inlet_w,inlet_long_l+fanduct_shell]); translate([inlet_h+fanduct_shell,0,inlet_long_l+fanduct_shell]) rotate([-90,0,0]) translate([0,0,-1]) cylinder(r=inlet_h,h=inlet_w+2*fanduct_shell+2,$fn=inlet_h*4); } // supports for(i=[-1,0,1]) translate([-fanduct_shell, (i+1)*(inlet_w-extrusion_width)/2, -inlet_away-fanduct_w/2]) cube(size=[fanduct_shell+1, extrusion_width, inlet_long_l+fanduct_shell+inlet_away+fanduct_w/2]); } hull() { placeit() translate([-fanduct_shell,-inlet_w/2-fanduct_shell,0]) cube(size=[inlet_h+2*fanduct_shell,inlet_w+2*fanduct_shell,fanduct_shell]); translate([-fanduct_ir-fanduct_shell-fanduct_w/2,0,0]) translate([0,-inlet_w/2-fanduct_shell/2,0]) cube(size=[1,inlet_w+fanduct_shell,fanduct_shell*2+fanduct_h]); } }else if(what=="out") { placeit() translate([fanduct_shell,-inlet_w/2+fanduct_shell,0]) cube(size=[inlet_h-2*fanduct_shell,inlet_w-2*fanduct_shell,inlet_long_l+fanduct_shell+1]); hull() { placeit() translate([fanduct_shell,-inlet_w/2+fanduct_shell,0]) cube(size=[inlet_h-2*fanduct_shell,inlet_w-2*fanduct_shell,fanduct_shell]); translate([-fanduct_ir-fanduct_shell-fanduct_w/2,0,fanduct_shell]) translate([0,-inlet_w/2+fanduct_shell,0]) cube(size=[1,inlet_w-2*fanduct_shell,fanduct_h]); } } } // *** DUCT TAILS!!! WOO-OO! (every day they're out there making duct tails…) module tails(what) { if(dual && type=="simple") { // XXX: not sure if it will ever be }else{ if(what=="in") { for(mx=[0,1]) mirror([mx,0,0]) translate([fanduct_ir+fanduct_shell+fanduct_w/2,0,fanduct_shell+fanduct_h/2]) rotate([90,0,90]) translate([0,0,-snapper_d/2]) snapper(d=snapper_d,o=snapper_overlap,side=0,l=fanduct_h*3/2+fanduct_shell); } } } module parts(what) { union() { duct(what); marks(what); output(what); intake(what); tails(what); } } difference() { parts("in"); parts("out"); } intersection() { union() { output("airguides"); sphere(d=epsilon); } union() { duct("in"); output("in"); intake("in"); } } } view="*"; // hcut|vcut|* hinfinity=4*(fanduct_ir+fanduct_shell*2+fanduct_w+inlet_away); vinfinity=2*(fanduct_shell*2+fanduct_h+inlet_h); if(view=="hcut") { difference() { fanduct(); translate([-hinfinity/2,-hinfinity/2,fanduct_shell+fanduct_h/2]) cube(size=[hinfinity,hinfinity,vinfinity]); } |