duet holder in alltogethernow

1 files changed, 12 insertions, 1 deletions

diff --git a/delta.jscad b/delta.jscad
index 855d4f9..01a5dc7 100644
--- a/delta.jscad
+++ b/delta.jscad
@@ -705,97 +705,108 @@ function duetholder() {
   }),
   CSG.cube({ // cut off
    corner1: [-hw/2-1,-2*s,0],
    corner2: [hw/2+1,0,-2*s]
   }).rotateX(45).translate([0,-CONFIG.extrusion.w,0]),
   CSG.cylinder({ // duet bolt
    start: [0,hl,-lower], end: [0,hl,-lower+DH.s],
    radius: DH.bolt.d/2+PRINT.slide_tolerance
   })
  ]);
  var cp = [0,hl,-lower+DH.s];
  rv.properties.duet = new CSG.Properties();
  rv.properties.duet.c_sw = new CSG.Connector(cp,[0,0,1],[1,0,0]);
  rv.properties.duet.c_se = new CSG.Connector(cp,[0,0,1],[1,0,0]);
  rv.properties.duet.c_ne = new CSG.Connector(cp,[0,0,1],[-Math.cos(Math.PI/3),-Math.sin(Math.PI/3),0]);
  rv.properties.duet.c_nw = new CSG.Connector(cp,[0,0,1],[-Math.cos(Math.PI/3),Math.sin(Math.PI/3),0]);
  rv.properties.c_h = new CSG.Connector([0,-CONFIG.extrusion.w/2,0],[0,0,1],[1,0,0]);
  rv.properties.c_v = new CSG.Connector([0,0,CONFIG.extrusion.w/2],[0,-1,0],[0,0,1]);
  rv.properties.P = new CSG.Connector([-hw/2,0,0],[1,0,0],[0,1,0]);
  return rv.setColor(CONFIG.color.parts);
 }
 
 function refaxes(o) {
  if(!o) o = {};
  var l = o.l||20, g = o.g||0.7;
  return union([
   CSG.roundedCylinder({start:[0,0,0],end:[l,0,0]}).setColor([1,0,0,g]),
   CSG.roundedCylinder({start:[0,0,0],end:[0,l,0]}).setColor([0,1,0,g]),
   CSG.roundedCylinder({start:[0,0,0],end:[0,0,l]}).setColor([0,0,1,g])
  ]);
 }
 
 function P(x) {
  return x.connectTo(x.properties.P,new CSG.Connector([0,0,0],[0,0,1],[1,0,0]), false, 0);
 }
 
 var PARTS = {
  wip: function(params) {
   return foot();
   return union(base_extrusions(),column_extrusions(),duet());
  alltogethernow: function(params) {
   var cols = columns();
   var sides = base_sides();
   var feet = THREEWINDS.map(function(w,i) {
    var rv = foot();
    rv = rv.connectTo(rv.properties.c_column,cols[i].properties.c_bottom,false,0);
    return rv;
   });
-  var rv = union(cols).union(sides.map(union)).union(feet);
+  var dh = duetholder();
+  var dhsw = dh.connectTo(dh.properties.c_h,
+   new CSG.Connector([-CONFIG.duet.hole_spacing.x/2,-CD.base.mid_inscription_r,CONFIG.foot.h],[0,0,1],[1,0,0]),
+   false,0);
+  var d = duet();
+  d = d.connectTo(d.properties.holes.c_sw,dhsw.properties.duet.c_sw,false,0);
+  var dhse = dh.connectTo(dh.properties.duet.c_se,d.properties.holes.c_se,false,0);
+  var dhne = dh.connectTo(dh.properties.duet.c_ne,d.properties.holes.c_ne,false,0);
+  var dhnw = dh.connectTo(dh.properties.duet.c_nw,d.properties.holes.c_nw,false,0);
+  var rv = union(cols).union(sides.map(union)).union(feet).union([
+   d,dhsw,dhse,dhne,dhnw
+  ]);
   rv.properties.P = new CSG.Connector([0,0,0],[0,0,1],[1,0,0]);
   return rv;
  },
  duetholder: function(params) {
   return duetholder();
  }
 };
 
 function main(params) {
  var part = params.part && PARTS[params.part];
  if(!part) return refaxes();
  var rv = P(part(params));
  if(!params.print) rv = rv.union(refaxes());
  return rv;
 }
 
 function _main(params) {
  var e = EFFECTOR.effector();
  var hs = E3DV6.heatsink();
  hs = hs.connectTo(hs.properties.grove_connector,e.properties.grove_connector,false,0);
  var ms = microswitch();
  var hd = EFFECTOR.hinged({
   microswitch:ms,effector:e
  });
  ms = ms.connectTo(
   ms.properties.screw_connector[0],
   hd.properties.microswitch_screw_connector[0],
   false, 0);
  var hdhd = EFFECTOR.split_hinged(hd);
  var fh = EFFECTOR.fanholder();
  return union({
   platform: e,
   hinged: hdhd[1],
   clamp: hdhd[0],
   fanholder: fh,
   alltogethernow: [e,hdhd[0],hdhd[1], columns(),hs,ms,fh]
  }[params.part||'alltogethernow'])
  var rv = union(
   e,
   hs,
   columns(),
   ///hd,
   hdhd[0], hdhd[1],
   ms);
  return rv;
 }
 
 function getParameterDefinitions() {