author | Michael Krelin <hacker@klever.net> | 2016-01-06 23:46:44 (UTC) |
---|---|---|
committer | Michael Krelin <hacker@klever.net> | 2016-01-06 23:46:44 (UTC) |
commit | 740c971a9ebf663765e91eb84e2251d303ea4ceb (patch) (side-by-side diff) | |
tree | 8ff1127eaaf754b37d74a13a19fc8f7f7090f301 /delta.jscad | |
parent | 4cb92354224641376d311adc7589ebb4bdc5639d (diff) | |
download | redelta-740c971a9ebf663765e91eb84e2251d303ea4ceb.zip redelta-740c971a9ebf663765e91eb84e2251d303ea4ceb.tar.gz redelta-740c971a9ebf663765e91eb84e2251d303ea4ceb.tar.bz2 |
part selection machinery
-rw-r--r-- | delta.jscad | 12 |
1 files changed, 11 insertions, 1 deletions
diff --git a/delta.jscad b/delta.jscad index b3bb3d3..5d40e26 100644 --- a/delta.jscad +++ b/delta.jscad @@ -473,189 +473,199 @@ var E2020 = { var ix = e.T.width/2-(e.outer/2-iy-e.thickness-e.T.thickness); var rv = CAG.roundedRectangle({ corner1: [-e.outer/2,-e.outer/2], corner2: [e.outer/2,e.outer/2], roundradius: e.roundius }).subtract( FOURWINDS.map(function(w) { return CAG.fromPoints([ [ e.slot_width/2,e.outer/2+1], [ e.slot_width/2,e.outer/2-e.thickness], [ e.T.width/2,e.outer/2-e.thickness], [ e.T.width/2,e.outer/2-e.thickness-e.T.thickness], [ ix, iy ], [ -ix, iy ], [ -e.T.width/2,e.outer/2-e.thickness-e.T.thickness], [ -e.T.width/2,e.outer/2-e.thickness], [ -e.slot_width/2,e.outer/2-e.thickness], [ -e.slot_width/2,e.outer/2+1], ]).rotateZ(w); }) ).subtract(CAG.circle({ center: [0,0], radius: e.centerhole/2 })).extrude({offset:[0,0,l]}); rv.properties.c_top=rv.properties.c_left = new CSG.Connector([0,0,l],[0,0,-1],[1,0,0]); rv.properties.c_bottom=rv.properties.c_right = new CSG.Connector([0,0,0],[0,0,1],[1,0,0]); rv.properties.c_midway = new CSG.Connector([0,0,l/2],[0,0,1],[1,0,0]); rv.properties.P = new CSG.Connector([0,0,0],[0,0,1],[1,0,0]); rv.properties.vitamin = true; return rv; }, cap: function extrusion_cap(o) { if(!o) o = {}; var e = o.extrusion || this; var thickness = o.thickness||2, l = o.l||5; var rv = CSG.roundedCube({ corner1: [-e.outer/2,-e.outer/2,thickness], corner2: [e.outer/2,e.outer/2,0], roundradius: [e.roundius,e.roundius,0] }); var fw = [0,90,180,270]; // four winds var iy = e.outer/2-e.T.depth; var ix = e.T.width/2-(e.outer/2-iy-e.thickness-e.T.thickness); rv = rv.union(fw.map(function(w) { return CAG.fromPoints([ [ e.slot_width/2,e.outer/2], [ e.slot_width/2,e.outer/2-e.thickness], [ e.T.width/2,e.outer/2-e.thickness], [ e.T.width/2,e.outer/2-e.thickness-e.T.thickness], [ ix, iy ], [ -ix, iy ], [ -e.T.width/2,e.outer/2-e.thickness-e.T.thickness], [ -e.T.width/2,e.outer/2-e.thickness], [ -e.slot_width/2,e.outer/2-e.thickness], [ -e.slot_width/2,e.outer/2], ]).extrude({offset:[0,0,l+thickness]}).rotateZ(w); })); rv.properties.P = new CSG.Connector([0,0,0],[0,0,1],[1,0,0]); return rv; } }; var THREEWINDS = [0,120,240]; function base_extrusions() { var rv = union( THREEWINDS.map(function(w) { var e = E2020.extrusion({l:CONFIG.base.el}); e = e.connectTo(e.properties.c_midway, new CSG.Connector([0,-CD.base.mid_inscription_r,CONFIG.extrusion.w/2],[1,0,0],[0,0,1]), false, 0); return union( [0,CONFIG.extrusion.w+CONFIG.base.gap].map(function(z) { return e.translate([0,0,z]); }) ).rotateZ(w); }) ); rv.properties.P = new CSG.Connector([0,0,0],[0,0,1],[1,0,0]); return rv.setColor(CONFIG.color.extrusion); } function column_extrusions() { var rv = union( THREEWINDS.map(function(w) { return E2020.extrusion({l:CONFIG.column.h}).translate([0,CD.base.column_r,0]).rotateZ(w); }) ); rv.properties.P = new CSG.Connector([0,0,0],[0,0,1],[1,0,0]); return rv.setColor(CONFIG.color.extrusion); } function duet() { var C = CONFIG.duet; var pholes = new CSG.Properties(); var hx = C.hole_spacing.x/2; var hy = C.hole_spacing.y/2; var hh = { nw: [1,-1], ne: [1,1], se: [-1,1], sw: [-1,-1] }; var holes = []; for(w in hh) { var h = hh[w],_x=h[0]*hx,_y=h[1]*hy; holes.push(CSG.cylinder({start:[_x,_y,-1],end:[_x,_y,C.pcb_size.z+1],radius:3/2})); pholes['c_'+w] = new CSG.Connector([_x,_y,0],[0,0,1],[1,0,0]); } rv = CSG.cube({ corner1: [-C.pcb_size.x/2, -C.pcb_size.y/2, 0], corner2: [ C.pcb_size.x/2, C.pcb_size.y/2, C.pcb_size.z] }).subtract(holes).setColor(CONFIG.color.pcb).union( CSG.cube({ corner1: [-C.pcb_size.x/2,-C.hole_spacing.y/2+3,C.pcb_size.z], corner2: [ C.pcb_size.x/2, C.hole_spacing.y/2-3,C.h] }).setColor(CONFIG.color.bulk) ); rv.properties.holes = pholes; rv.properties.P = new CSG.Connector([0,0,0],[0,0,1],[1,0,0]); rv.properties.vitamin = true; return rv; } function refaxes(o) { if(!o) o = {}; var l = o.l||20, g = o.g||0.7; return union([ CSG.cylinder({start:[0,0,0],end:[l,0,0]}).setColor([1,0,0,g]), CSG.cylinder({start:[0,0,0],end:[0,l,0]}).setColor([0,1,0,g]), CSG.cylinder({start:[0,0,0],end:[0,0,l]}).setColor([0,0,1,g]) ]); } function P(x) { return x.connectTo(x.properties.P,new CSG.Connector([0,0,0],[0,0,1],[1,0,0]), false, 0); } +var PARTS = { + wip: function(params) { + return union(base_extrusions(),column_extrusions(),duet()); + } +}; + function main(params) { - return refaxes().union(P(base_extrusions())); + var part = params.part && PARTS[params.part]; + if(!part) return refaxes(); + var rv = P(part(params)); + if(true) rv = rv.union(refaxes()); + return rv; } function _main(params) { var e = EFFECTOR.effector(); var hs = E3DV6.heatsink(); hs = hs.connectTo(hs.properties.grove_connector,e.properties.grove_connector,false,0); var ms = microswitch(); var hd = EFFECTOR.hinged({ microswitch:ms,effector:e }); ms = ms.connectTo( ms.properties.screw_connector[0], hd.properties.microswitch_screw_connector[0], false, 0); var hdhd = EFFECTOR.split_hinged(hd); var fh = EFFECTOR.fanholder(); return union({ platform: e, hinged: hdhd[1], clamp: hdhd[0], fanholder: fh, alltogethernow: [e,hdhd[0],hdhd[1], columns(),hs,ms,fh] }[params.part||'alltogethernow']) var rv = union( e, hs, columns(), ///hd, hdhd[0], hdhd[1], ms); return rv; } function getParameterDefinitions() { return [{ name: 'part', type: 'choice', values: [ 'platform', 'hinged', 'clamp', 'fanholder', 'alltogethernow', 'wip' ], captions: [ 'Effector platform', 'Hinged part', 'Clamp', 'Fan holder', 'All together now!', 'Work in progress' ], caption: 'Part', initial: 'wip' }]; } /* vim:set ft=javascript ai: */ |