wip wip

1 files changed, 5 insertions, 1 deletions

diff --git a/delta.jscad b/delta.jscad
index 01a5dc7..8233e74 100644
--- a/delta.jscad
+++ b/delta.jscad
@@ -551,294 +551,298 @@ var E2020 = {
     [ -e.T.width/2,e.outer/2-e.thickness-e.T.thickness],
     [ -e.T.width/2,e.outer/2-e.thickness],
     [ -e.slot_width/2,e.outer/2-e.thickness],
     [ -e.slot_width/2,e.outer/2],
    ]).extrude({offset:[0,0,l+thickness]}).rotateZ(w);
   }));
   rv.properties.P = new CSG.Connector([0,0,0],[0,0,1],[1,0,0]);
   return rv;
  }
 };
 
 var THREEWINDS = [0,120,240];
 
 function base_sides() {
  return [0,1].map(function(l) {
   return THREEWINDS.map(function(w) {
    var e = E2020.extrusion({l:CONFIG.base.el});
    e = e.connectTo(e.properties.c_midway,
     new CSG.Connector([0,-CD.base.mid_inscription_r,CONFIG.extrusion.w/2],[1,0,0],[0,0,1]),
     false, 0);
    return ( e.translate([0,0,CONFIG.foot.h+l*(CONFIG.extrusion.w+CONFIG.base.gap)])
     .rotateZ(w)
     .setColor(CONFIG.color.extrusion) );
   });
  });
 }
 function base_extrusions() {
  var rv = union( base_sides().map(function(x){return union(x)}) );
  rv.properties.P = new CSG.Connector([0,0,0],[0,0,1],[1,0,0]);
  return rv;
 }
 
 function columns() {
  return THREEWINDS.map(function(w) {
   return (E2020.extrusion({l:CONFIG.column.h})
    .translate([0,CD.base.column_r,CONFIG.foot.h])
    .rotateZ(w).setColor(CONFIG.color.extrusion)
   );
  });
 }
 function column_extrusions() {
  var rv = union( columns() );
  rv.properties.P = new CSG.Connector([0,0,0],[0,0,1],[1,0,0]);
  return rv;
 }
 
 function duet() {
  var C = CONFIG.duet;
  var pholes = new CSG.Properties();
  var hx = C.hole_spacing.x/2;
  var hy = C.hole_spacing.y/2;
  var hh = { nw: [-1,1], ne: [1,1], se: [1,-1], sw: [-1,-1] };
  var holes = [];
  for(w in hh) {
   var h = hh[w],_x=h[0]*hx,_y=h[1]*hy;
   holes.push(CSG.cylinder({start:[_x,_y,-1],end:[_x,_y,C.pcb_size.z+1],radius:3/2}));
   pholes['c_'+w] = new CSG.Connector([_x,_y,0],[0,0,1],[1,0,0]);
  }
  rv = CSG.cube({
   corner1: [-C.pcb_size.x/2, -C.pcb_size.y/2,            0],
   corner2: [ C.pcb_size.x/2,  C.pcb_size.y/2, C.pcb_size.z]
  }).subtract(holes).setColor(CONFIG.color.pcb).union(
   CSG.cube({
    corner1: [-C.pcb_size.x/2,-C.hole_spacing.y/2+3,C.pcb_size.z],
    corner2: [ C.pcb_size.x/2, C.hole_spacing.y/2-3,C.h]
   }).setColor(CONFIG.color.bulk)
  );
  rv.properties.holes = pholes;
  rv.properties.P = new CSG.Connector([0,0,0],[0,0,1],[1,0,0]);
  rv.properties.vitamin = true;
  return rv;
 }
 
 function foot() {
  var F = CONFIG.foot;
  var br = F.bolt.hd/2+F.margin;
  var bh = F.zscalefactor*Math.sqrt(Math.pow(F.d/2,2)-Math.pow(br,2));
  var th = F.h-bh;
  var r = 2*F.d;
  var rv = CSG.sphere({ // botom contorted sphere
   center: [0,0,0], radius: F.d/2, resolution: r
  }).scale([1,1,F.zscalefactor]).translate([0,0,bh]).union(CSG.cylinder({ // top hat
   start: [0,0,bh], end: [0,0,F.h], radius: F.d/2, resolution: r
  })).intersect(CSG.cylinder({ // cut off excess
   start: [0,0,0], end: [0,0,F.h], radius: F.d
  })).subtract([
    CSG.cylinder({ // bolt hole
    start: [0,0,-1], end: [0,0,F.h+1], radius: F.bolt.d/2+PRINT.slide_tolerance
   }), CSG.cylinder({ // nut hole
    start: [0,0,F.h-F.nut.h-PRINT.play_tolerance],
    end: [0,0,F.h],
    radius: F.nut.d/2+PRINT.slide_tolerance, resolution: 6
   }), CSG.cylinder({ // bolthead/washer hole
    start: [0,0,-1], end: [0,0,F.h-F.nut.h-PRINT.play_tolerance-F.shell],
    radius: F.bolt.hd/2+PRINT.play_tolerance
   })
  ]).union(CSG.cylinder({ // bridging patch
   start: [0,0,F.h-F.nut.h-PRINT.play_tolerance-PRINT.layer_height],
   end: [0,0,F.h-F.nut.h-PRINT.play_tolerance],
   radius: F.nut.d/2
  }));
  rv.properties.c_column = new CSG.Connector([0,0,F.h],[0,0,1],[1,0,0]);
  rv.properties.P = new CSG.Connector([0,0,F.h],[0,0,-1],[1,0,0]);
  return rv.setColor(CONFIG.color.parts);
 }
 function foot_foot() {
  // TODO: connect in the altogethernow?
  var F = CONFIG.foot;
  var rv = CSG.cylinder({
   start: [0,0,0], end: [0,0,F.foot.ho],
   radius: F.bolt.hd/2+F.margin
  }).union(CSG.cylinder({
   start: [0,0,0], end: [0,0,F.foot.ho+F.foot.hi],
   radius: F.bolt.hd/2+PRINT.play_tolerance-PRINT.fit_tolerance
  }));
  rv.properties.c_foot = new CSG.Connector([0,0,F.foot.ho],[0,0,1],[1,0,0]);
  rv.properties.P = new CSG.Connector([0,0,0],[0,0,1],[1,0,0]);
  return rv.setColor(CONFIG.color.softparts);
 }
 
 function duetholder() {
  var DH = CONFIG.duetholder;
  var DHD = CD.duetholder;
  var hw = DH.bolt.head.d+2*DH.margin;
  var s = DH.bolt.l-CONFIG.extrusion.slotdepth+PRINT.play_tolerance*2;
  var lower = CONFIG.foot.h-2*DH.s;
  var hl = DHD.distance-CONFIG.extrusion.w;
  var rv = union([
   CSG.cube({ // vertical
    corner1: [-hw/2,s,CONFIG.extrusion.w],
    corner2: [hw/2,0,-lower]
   }),
   CSG.cube({ // horizontal extrusion
    corner1: [-hw/2,-CONFIG.extrusion.w,0],
    corner2: [ hw/2,0,-s]
   }),
   CSG.cube({ // horizontal
    corner1: [-hw/2,0,-lower],
    corner2: [hw/2,hl,-lower+DH.s]
   }),
   CSG.cylinder({ // boltend of horizontal part
    start: [0,hl,-lower], end: [0,hl,-lower+DH.s],
    radius: hw/2
   })
  ]);
  rv = rv.subtract([
   CSG.cylinder({ // through vertical
    start: [0,-1,CONFIG.extrusion.w/2], end: [0,s+1,CONFIG.extrusion.w/2],
    radius: DH.bolt.d/2+PRINT.slide_tolerance
   }),
   CSG.cylinder({ // through horizontal to extrusion
    start: [0,-CONFIG.extrusion.w/2,-s-1],
    end: [0,-CONFIG.extrusion.w/2,1],
    radius: DH.bolt.d/2+PRINT.slide_tolerance
   }),
   CSG.cube({ // cut off
    corner1: [-hw/2-1,-2*s,0],
    corner2: [hw/2+1,0,-2*s]
   }).rotateX(45).translate([0,-CONFIG.extrusion.w,0]),
   CSG.cylinder({ // duet bolt
    start: [0,hl,-lower], end: [0,hl,-lower+DH.s],
    radius: DH.bolt.d/2+PRINT.slide_tolerance
   })
  ]);
  var cp = [0,hl,-lower+DH.s];
  rv.properties.duet = new CSG.Properties();
  rv.properties.duet.c_sw = new CSG.Connector(cp,[0,0,1],[1,0,0]);
  rv.properties.duet.c_se = new CSG.Connector(cp,[0,0,1],[1,0,0]);
  rv.properties.duet.c_ne = new CSG.Connector(cp,[0,0,1],[-Math.cos(Math.PI/3),-Math.sin(Math.PI/3),0]);
  rv.properties.duet.c_nw = new CSG.Connector(cp,[0,0,1],[-Math.cos(Math.PI/3),Math.sin(Math.PI/3),0]);
  rv.properties.c_h = new CSG.Connector([0,-CONFIG.extrusion.w/2,0],[0,0,1],[1,0,0]);
  rv.properties.c_v = new CSG.Connector([0,0,CONFIG.extrusion.w/2],[0,-1,0],[0,0,1]);
  rv.properties.P = new CSG.Connector([-hw/2,0,0],[1,0,0],[0,1,0]);
  return rv.setColor(CONFIG.color.parts);
 }
 
 function refaxes(o) {
  if(!o) o = {};
  var l = o.l||20, g = o.g||0.7;
  return union([
   CSG.roundedCylinder({start:[0,0,0],end:[l,0,0]}).setColor([1,0,0,g]),
   CSG.roundedCylinder({start:[0,0,0],end:[0,l,0]}).setColor([0,1,0,g]),
   CSG.roundedCylinder({start:[0,0,0],end:[0,0,l]}).setColor([0,0,1,g])
  ]);
 }
 
 function P(x) {
  return x.connectTo(x.properties.P,new CSG.Connector([0,0,0],[0,0,1],[1,0,0]), false, 0);
 }
 
 var PARTS = {
  wip: function(params) {
+  return duetholder(params);
+  return PARTS.alltogethernow(params);
+  return base_extrusions();
   return foot();
-  return union(base_extrusions(),column_extrusions(),duet());
+  return union(base_extrusions(),column_extrusions(),duet().translate([0,-20,0]));
+ },
  alltogethernow: function(params) {
   var cols = columns();
   var sides = base_sides();
   var feet = THREEWINDS.map(function(w,i) {
    var rv = foot();
    rv = rv.connectTo(rv.properties.c_column,cols[i].properties.c_bottom,false,0);
    return rv;
   });
   var dh = duetholder();
   var dhsw = dh.connectTo(dh.properties.c_h,
    new CSG.Connector([-CONFIG.duet.hole_spacing.x/2,-CD.base.mid_inscription_r,CONFIG.foot.h],[0,0,1],[1,0,0]),
    false,0);
   var d = duet();
   d = d.connectTo(d.properties.holes.c_sw,dhsw.properties.duet.c_sw,false,0);
   var dhse = dh.connectTo(dh.properties.duet.c_se,d.properties.holes.c_se,false,0);
   var dhne = dh.connectTo(dh.properties.duet.c_ne,d.properties.holes.c_ne,false,0);
   var dhnw = dh.connectTo(dh.properties.duet.c_nw,d.properties.holes.c_nw,false,0);
   var rv = union(cols).union(sides.map(union)).union(feet).union([
    d,dhsw,dhse,dhne,dhnw
   ]);
   rv.properties.P = new CSG.Connector([0,0,0],[0,0,1],[1,0,0]);
   return rv;
  },
  duetholder: function(params) {
   return duetholder();
  }
 };
 
 function main(params) {
  var part = params.part && PARTS[params.part];
  if(!part) return refaxes();
  var rv = P(part(params));
  if(!params.print) rv = rv.union(refaxes());
  return rv;
 }
 
 function _main(params) {
  var e = EFFECTOR.effector();
  var hs = E3DV6.heatsink();
  hs = hs.connectTo(hs.properties.grove_connector,e.properties.grove_connector,false,0);
  var ms = microswitch();
  var hd = EFFECTOR.hinged({
   microswitch:ms,effector:e
  });
  ms = ms.connectTo(
   ms.properties.screw_connector[0],
   hd.properties.microswitch_screw_connector[0],
   false, 0);
  var hdhd = EFFECTOR.split_hinged(hd);
  var fh = EFFECTOR.fanholder();
  return union({
   platform: e,
   hinged: hdhd[1],
   clamp: hdhd[0],
   fanholder: fh,
   alltogethernow: [e,hdhd[0],hdhd[1], columns(),hs,ms,fh]
  }[params.part||'alltogethernow'])
  var rv = union(
   e,
   hs,
   columns(),
   ///hd,
   hdhd[0], hdhd[1],
   ms);
  return rv;
 }
 
 function getParameterDefinitions() {
  return [{
   name: 'part',
   type: 'choice',
   values: [
    'platform',
    'hinged',
    'clamp',
    'fanholder',
    'duetholder',
    'alltogethernow',
    'wip'
   ],
   captions: [
    'Effector platform',
    'Hinged part',
    'Clamp',
    'Fan holder',
    'Duet holder',
    'All together now!',
    'Work in progress'
   ],
   caption: 'Part',
   initial: 'wip'
  },{
   name: 'print',
   type: 'checkbox',
   caption: 'For print, no nonsense',
   initial: false
  }];
 }
 
 /* vim:set ft=javascript ai: */