-rw-r--r-- | delta.jscad | 5 |
1 files changed, 5 insertions, 0 deletions
diff --git a/delta.jscad b/delta.jscad index dcf6fcc..855d4f9 100644 --- a/delta.jscad +++ b/delta.jscad | |||
@@ -564,265 +564,270 @@ var THREEWINDS = [0,120,240]; | |||
564 | function base_sides() { | 564 | function base_sides() { |
565 | return [0,1].map(function(l) { | 565 | return [0,1].map(function(l) { |
566 | return THREEWINDS.map(function(w) { | 566 | return THREEWINDS.map(function(w) { |
567 | var e = E2020.extrusion({l:CONFIG.base.el}); | 567 | var e = E2020.extrusion({l:CONFIG.base.el}); |
568 | e = e.connectTo(e.properties.c_midway, | 568 | e = e.connectTo(e.properties.c_midway, |
569 | new CSG.Connector([0,-CD.base.mid_inscription_r,CONFIG.extrusion.w/2],[1,0,0],[0,0,1]), | 569 | new CSG.Connector([0,-CD.base.mid_inscription_r,CONFIG.extrusion.w/2],[1,0,0],[0,0,1]), |
570 | false, 0); | 570 | false, 0); |
571 | return ( e.translate([0,0,CONFIG.foot.h+l*(CONFIG.extrusion.w+CONFIG.base.gap)]) | 571 | return ( e.translate([0,0,CONFIG.foot.h+l*(CONFIG.extrusion.w+CONFIG.base.gap)]) |
572 | .rotateZ(w) | 572 | .rotateZ(w) |
573 | .setColor(CONFIG.color.extrusion) ); | 573 | .setColor(CONFIG.color.extrusion) ); |
574 | }); | 574 | }); |
575 | }); | 575 | }); |
576 | } | 576 | } |
577 | function base_extrusions() { | 577 | function base_extrusions() { |
578 | var rv = union( base_sides().map(function(x){return union(x)}) ); | 578 | var rv = union( base_sides().map(function(x){return union(x)}) ); |
579 | rv.properties.P = new CSG.Connector([0,0,0],[0,0,1],[1,0,0]); | 579 | rv.properties.P = new CSG.Connector([0,0,0],[0,0,1],[1,0,0]); |
580 | return rv; | 580 | return rv; |
581 | } | 581 | } |
582 | 582 | ||
583 | function columns() { | 583 | function columns() { |
584 | return THREEWINDS.map(function(w) { | 584 | return THREEWINDS.map(function(w) { |
585 | return (E2020.extrusion({l:CONFIG.column.h}) | 585 | return (E2020.extrusion({l:CONFIG.column.h}) |
586 | .translate([0,CD.base.column_r,CONFIG.foot.h]) | 586 | .translate([0,CD.base.column_r,CONFIG.foot.h]) |
587 | .rotateZ(w).setColor(CONFIG.color.extrusion) | 587 | .rotateZ(w).setColor(CONFIG.color.extrusion) |
588 | ); | 588 | ); |
589 | }); | 589 | }); |
590 | } | 590 | } |
591 | function column_extrusions() { | 591 | function column_extrusions() { |
592 | var rv = union( columns() ); | 592 | var rv = union( columns() ); |
593 | rv.properties.P = new CSG.Connector([0,0,0],[0,0,1],[1,0,0]); | 593 | rv.properties.P = new CSG.Connector([0,0,0],[0,0,1],[1,0,0]); |
594 | return rv; | 594 | return rv; |
595 | } | 595 | } |
596 | 596 | ||
597 | function duet() { | 597 | function duet() { |
598 | var C = CONFIG.duet; | 598 | var C = CONFIG.duet; |
599 | var pholes = new CSG.Properties(); | 599 | var pholes = new CSG.Properties(); |
600 | var hx = C.hole_spacing.x/2; | 600 | var hx = C.hole_spacing.x/2; |
601 | var hy = C.hole_spacing.y/2; | 601 | var hy = C.hole_spacing.y/2; |
602 | var hh = { nw: [-1,1], ne: [1,1], se: [1,-1], sw: [-1,-1] }; | 602 | var hh = { nw: [-1,1], ne: [1,1], se: [1,-1], sw: [-1,-1] }; |
603 | var holes = []; | 603 | var holes = []; |
604 | for(w in hh) { | 604 | for(w in hh) { |
605 | var h = hh[w],_x=h[0]*hx,_y=h[1]*hy; | 605 | var h = hh[w],_x=h[0]*hx,_y=h[1]*hy; |
606 | holes.push(CSG.cylinder({start:[_x,_y,-1],end:[_x,_y,C.pcb_size.z+1],radius:3/2})); | 606 | holes.push(CSG.cylinder({start:[_x,_y,-1],end:[_x,_y,C.pcb_size.z+1],radius:3/2})); |
607 | pholes['c_'+w] = new CSG.Connector([_x,_y,0],[0,0,1],[1,0,0]); | 607 | pholes['c_'+w] = new CSG.Connector([_x,_y,0],[0,0,1],[1,0,0]); |
608 | } | 608 | } |
609 | rv = CSG.cube({ | 609 | rv = CSG.cube({ |
610 | corner1: [-C.pcb_size.x/2, -C.pcb_size.y/2, 0], | 610 | corner1: [-C.pcb_size.x/2, -C.pcb_size.y/2, 0], |
611 | corner2: [ C.pcb_size.x/2, C.pcb_size.y/2, C.pcb_size.z] | 611 | corner2: [ C.pcb_size.x/2, C.pcb_size.y/2, C.pcb_size.z] |
612 | }).subtract(holes).setColor(CONFIG.color.pcb).union( | 612 | }).subtract(holes).setColor(CONFIG.color.pcb).union( |
613 | CSG.cube({ | 613 | CSG.cube({ |
614 | corner1: [-C.pcb_size.x/2,-C.hole_spacing.y/2+3,C.pcb_size.z], | 614 | corner1: [-C.pcb_size.x/2,-C.hole_spacing.y/2+3,C.pcb_size.z], |
615 | corner2: [ C.pcb_size.x/2, C.hole_spacing.y/2-3,C.h] | 615 | corner2: [ C.pcb_size.x/2, C.hole_spacing.y/2-3,C.h] |
616 | }).setColor(CONFIG.color.bulk) | 616 | }).setColor(CONFIG.color.bulk) |
617 | ); | 617 | ); |
618 | rv.properties.holes = pholes; | 618 | rv.properties.holes = pholes; |
619 | rv.properties.P = new CSG.Connector([0,0,0],[0,0,1],[1,0,0]); | 619 | rv.properties.P = new CSG.Connector([0,0,0],[0,0,1],[1,0,0]); |
620 | rv.properties.vitamin = true; | 620 | rv.properties.vitamin = true; |
621 | return rv; | 621 | return rv; |
622 | } | 622 | } |
623 | 623 | ||
624 | function foot() { | 624 | function foot() { |
625 | var F = CONFIG.foot; | 625 | var F = CONFIG.foot; |
626 | var br = F.bolt.hd/2+F.margin; | 626 | var br = F.bolt.hd/2+F.margin; |
627 | var bh = F.zscalefactor*Math.sqrt(Math.pow(F.d/2,2)-Math.pow(br,2)); | 627 | var bh = F.zscalefactor*Math.sqrt(Math.pow(F.d/2,2)-Math.pow(br,2)); |
628 | var th = F.h-bh; | 628 | var th = F.h-bh; |
629 | var r = 2*F.d; | 629 | var r = 2*F.d; |
630 | var rv = CSG.sphere({ // botom contorted sphere | 630 | var rv = CSG.sphere({ // botom contorted sphere |
631 | center: [0,0,0], radius: F.d/2, resolution: r | 631 | center: [0,0,0], radius: F.d/2, resolution: r |
632 | }).scale([1,1,F.zscalefactor]).translate([0,0,bh]).union(CSG.cylinder({ // top hat | 632 | }).scale([1,1,F.zscalefactor]).translate([0,0,bh]).union(CSG.cylinder({ // top hat |
633 | start: [0,0,bh], end: [0,0,F.h], radius: F.d/2, resolution: r | 633 | start: [0,0,bh], end: [0,0,F.h], radius: F.d/2, resolution: r |
634 | })).intersect(CSG.cylinder({ // cut off excess | 634 | })).intersect(CSG.cylinder({ // cut off excess |
635 | start: [0,0,0], end: [0,0,F.h], radius: F.d | 635 | start: [0,0,0], end: [0,0,F.h], radius: F.d |
636 | })).subtract([ | 636 | })).subtract([ |
637 | CSG.cylinder({ // bolt hole | 637 | CSG.cylinder({ // bolt hole |
638 | start: [0,0,-1], end: [0,0,F.h+1], radius: F.bolt.d/2+PRINT.slide_tolerance | 638 | start: [0,0,-1], end: [0,0,F.h+1], radius: F.bolt.d/2+PRINT.slide_tolerance |
639 | }), CSG.cylinder({ // nut hole | 639 | }), CSG.cylinder({ // nut hole |
640 | start: [0,0,F.h-F.nut.h-PRINT.play_tolerance], | 640 | start: [0,0,F.h-F.nut.h-PRINT.play_tolerance], |
641 | end: [0,0,F.h], | 641 | end: [0,0,F.h], |
642 | radius: F.nut.d/2+PRINT.slide_tolerance, resolution: 6 | 642 | radius: F.nut.d/2+PRINT.slide_tolerance, resolution: 6 |
643 | }), CSG.cylinder({ // bolthead/washer hole | 643 | }), CSG.cylinder({ // bolthead/washer hole |
644 | start: [0,0,-1], end: [0,0,F.h-F.nut.h-PRINT.play_tolerance-F.shell], | 644 | start: [0,0,-1], end: [0,0,F.h-F.nut.h-PRINT.play_tolerance-F.shell], |
645 | radius: F.bolt.hd/2+PRINT.play_tolerance | 645 | radius: F.bolt.hd/2+PRINT.play_tolerance |
646 | }) | 646 | }) |
647 | ]).union(CSG.cylinder({ // bridging patch | 647 | ]).union(CSG.cylinder({ // bridging patch |
648 | start: [0,0,F.h-F.nut.h-PRINT.play_tolerance-PRINT.layer_height], | 648 | start: [0,0,F.h-F.nut.h-PRINT.play_tolerance-PRINT.layer_height], |
649 | end: [0,0,F.h-F.nut.h-PRINT.play_tolerance], | 649 | end: [0,0,F.h-F.nut.h-PRINT.play_tolerance], |
650 | radius: F.nut.d/2 | 650 | radius: F.nut.d/2 |
651 | })); | 651 | })); |
652 | rv.properties.c_column = new CSG.Connector([0,0,F.h],[0,0,1],[1,0,0]); | 652 | rv.properties.c_column = new CSG.Connector([0,0,F.h],[0,0,1],[1,0,0]); |
653 | rv.properties.P = new CSG.Connector([0,0,F.h],[0,0,-1],[1,0,0]); | 653 | rv.properties.P = new CSG.Connector([0,0,F.h],[0,0,-1],[1,0,0]); |
654 | return rv.setColor(CONFIG.color.parts); | 654 | return rv.setColor(CONFIG.color.parts); |
655 | } | 655 | } |
656 | function foot_foot() { | 656 | function foot_foot() { |
657 | // TODO: connect in the altogethernow? | 657 | // TODO: connect in the altogethernow? |
658 | var F = CONFIG.foot; | 658 | var F = CONFIG.foot; |
659 | var rv = CSG.cylinder({ | 659 | var rv = CSG.cylinder({ |
660 | start: [0,0,0], end: [0,0,F.foot.ho], | 660 | start: [0,0,0], end: [0,0,F.foot.ho], |
661 | radius: F.bolt.hd/2+F.margin | 661 | radius: F.bolt.hd/2+F.margin |
662 | }).union(CSG.cylinder({ | 662 | }).union(CSG.cylinder({ |
663 | start: [0,0,0], end: [0,0,F.foot.ho+F.foot.hi], | 663 | start: [0,0,0], end: [0,0,F.foot.ho+F.foot.hi], |
664 | radius: F.bolt.hd/2+PRINT.play_tolerance-PRINT.fit_tolerance | 664 | radius: F.bolt.hd/2+PRINT.play_tolerance-PRINT.fit_tolerance |
665 | })); | 665 | })); |
666 | rv.properties.c_foot = new CSG.Connector([0,0,F.foot.ho],[0,0,1],[1,0,0]); | 666 | rv.properties.c_foot = new CSG.Connector([0,0,F.foot.ho],[0,0,1],[1,0,0]); |
667 | rv.properties.P = new CSG.Connector([0,0,0],[0,0,1],[1,0,0]); | 667 | rv.properties.P = new CSG.Connector([0,0,0],[0,0,1],[1,0,0]); |
668 | return rv.setColor(CONFIG.color.softparts); | 668 | return rv.setColor(CONFIG.color.softparts); |
669 | } | 669 | } |
670 | 670 | ||
671 | function duetholder() { | 671 | function duetholder() { |
672 | var DH = CONFIG.duetholder; | 672 | var DH = CONFIG.duetholder; |
673 | var DHD = CD.duetholder; | 673 | var DHD = CD.duetholder; |
674 | var hw = DH.bolt.head.d+2*DH.margin; | 674 | var hw = DH.bolt.head.d+2*DH.margin; |
675 | var s = DH.bolt.l-CONFIG.extrusion.slotdepth+PRINT.play_tolerance*2; | 675 | var s = DH.bolt.l-CONFIG.extrusion.slotdepth+PRINT.play_tolerance*2; |
676 | var lower = CONFIG.foot.h-2*DH.s; | 676 | var lower = CONFIG.foot.h-2*DH.s; |
677 | var hl = DHD.distance-CONFIG.extrusion.w; | 677 | var hl = DHD.distance-CONFIG.extrusion.w; |
678 | var rv = union([ | 678 | var rv = union([ |
679 | CSG.cube({ // vertical | 679 | CSG.cube({ // vertical |
680 | corner1: [-hw/2,s,CONFIG.extrusion.w], | 680 | corner1: [-hw/2,s,CONFIG.extrusion.w], |
681 | corner2: [hw/2,0,-lower] | 681 | corner2: [hw/2,0,-lower] |
682 | }), | 682 | }), |
683 | CSG.cube({ // horizontal extrusion | 683 | CSG.cube({ // horizontal extrusion |
684 | corner1: [-hw/2,-CONFIG.extrusion.w,0], | 684 | corner1: [-hw/2,-CONFIG.extrusion.w,0], |
685 | corner2: [ hw/2,0,-s] | 685 | corner2: [ hw/2,0,-s] |
686 | }), | 686 | }), |
687 | CSG.cube({ // horizontal | 687 | CSG.cube({ // horizontal |
688 | corner1: [-hw/2,0,-lower], | 688 | corner1: [-hw/2,0,-lower], |
689 | corner2: [hw/2,hl,-lower+DH.s] | 689 | corner2: [hw/2,hl,-lower+DH.s] |
690 | }), | 690 | }), |
691 | CSG.cylinder({ // boltend of horizontal part | 691 | CSG.cylinder({ // boltend of horizontal part |
692 | start: [0,hl,-lower], end: [0,hl,-lower+DH.s], | 692 | start: [0,hl,-lower], end: [0,hl,-lower+DH.s], |
693 | radius: hw/2 | 693 | radius: hw/2 |
694 | }) | 694 | }) |
695 | ]); | 695 | ]); |
696 | rv = rv.subtract([ | 696 | rv = rv.subtract([ |
697 | CSG.cylinder({ // through vertical | 697 | CSG.cylinder({ // through vertical |
698 | start: [0,-1,CONFIG.extrusion.w/2], end: [0,s+1,CONFIG.extrusion.w/2], | 698 | start: [0,-1,CONFIG.extrusion.w/2], end: [0,s+1,CONFIG.extrusion.w/2], |
699 | radius: DH.bolt.d/2+PRINT.slide_tolerance | 699 | radius: DH.bolt.d/2+PRINT.slide_tolerance |
700 | }), | 700 | }), |
701 | CSG.cylinder({ // through horizontal to extrusion | 701 | CSG.cylinder({ // through horizontal to extrusion |
702 | start: [0,-CONFIG.extrusion.w/2,-s-1], | 702 | start: [0,-CONFIG.extrusion.w/2,-s-1], |
703 | end: [0,-CONFIG.extrusion.w/2,1], | 703 | end: [0,-CONFIG.extrusion.w/2,1], |
704 | radius: DH.bolt.d/2+PRINT.slide_tolerance | 704 | radius: DH.bolt.d/2+PRINT.slide_tolerance |
705 | }), | 705 | }), |
706 | CSG.cube({ // cut off | 706 | CSG.cube({ // cut off |
707 | corner1: [-hw/2-1,-2*s,0], | 707 | corner1: [-hw/2-1,-2*s,0], |
708 | corner2: [hw/2+1,0,-2*s] | 708 | corner2: [hw/2+1,0,-2*s] |
709 | }).rotateX(45).translate([0,-CONFIG.extrusion.w,0]), | 709 | }).rotateX(45).translate([0,-CONFIG.extrusion.w,0]), |
710 | CSG.cylinder({ // duet bolt | 710 | CSG.cylinder({ // duet bolt |
711 | start: [0,hl,-lower], end: [0,hl,-lower+DH.s], | 711 | start: [0,hl,-lower], end: [0,hl,-lower+DH.s], |
712 | radius: DH.bolt.d/2+PRINT.slide_tolerance | 712 | radius: DH.bolt.d/2+PRINT.slide_tolerance |
713 | }) | 713 | }) |
714 | ]); | 714 | ]); |
715 | var cp = [0,hl,-lower+DH.s]; | 715 | var cp = [0,hl,-lower+DH.s]; |
716 | rv.properties.duet = new CSG.Properties(); | 716 | rv.properties.duet = new CSG.Properties(); |
717 | rv.properties.duet.c_sw = new CSG.Connector(cp,[0,0,1],[1,0,0]); | 717 | rv.properties.duet.c_sw = new CSG.Connector(cp,[0,0,1],[1,0,0]); |
718 | rv.properties.duet.c_se = new CSG.Connector(cp,[0,0,1],[1,0,0]); | 718 | rv.properties.duet.c_se = new CSG.Connector(cp,[0,0,1],[1,0,0]); |
719 | rv.properties.duet.c_ne = new CSG.Connector(cp,[0,0,1],[-Math.cos(Math.PI/3),-Math.sin(Math.PI/3),0]); | 719 | rv.properties.duet.c_ne = new CSG.Connector(cp,[0,0,1],[-Math.cos(Math.PI/3),-Math.sin(Math.PI/3),0]); |
720 | rv.properties.duet.c_nw = new CSG.Connector(cp,[0,0,1],[-Math.cos(Math.PI/3),Math.sin(Math.PI/3),0]); | 720 | rv.properties.duet.c_nw = new CSG.Connector(cp,[0,0,1],[-Math.cos(Math.PI/3),Math.sin(Math.PI/3),0]); |
721 | rv.properties.c_h = new CSG.Connector([0,-CONFIG.extrusion.w/2,0],[0,0,1],[1,0,0]); | 721 | rv.properties.c_h = new CSG.Connector([0,-CONFIG.extrusion.w/2,0],[0,0,1],[1,0,0]); |
722 | rv.properties.c_v = new CSG.Connector([0,0,CONFIG.extrusion.w/2],[0,-1,0],[0,0,1]); | 722 | rv.properties.c_v = new CSG.Connector([0,0,CONFIG.extrusion.w/2],[0,-1,0],[0,0,1]); |
723 | rv.properties.P = new CSG.Connector([-hw/2,0,0],[1,0,0],[0,1,0]); | 723 | rv.properties.P = new CSG.Connector([-hw/2,0,0],[1,0,0],[0,1,0]); |
724 | return rv.setColor(CONFIG.color.parts); | 724 | return rv.setColor(CONFIG.color.parts); |
725 | } | 725 | } |
726 | 726 | ||
727 | function refaxes(o) { | 727 | function refaxes(o) { |
728 | if(!o) o = {}; | 728 | if(!o) o = {}; |
729 | var l = o.l||20, g = o.g||0.7; | 729 | var l = o.l||20, g = o.g||0.7; |
730 | return union([ | 730 | return union([ |
731 | CSG.roundedCylinder({start:[0,0,0],end:[l,0,0]}).setColor([1,0,0,g]), | 731 | CSG.roundedCylinder({start:[0,0,0],end:[l,0,0]}).setColor([1,0,0,g]), |
732 | CSG.roundedCylinder({start:[0,0,0],end:[0,l,0]}).setColor([0,1,0,g]), | 732 | CSG.roundedCylinder({start:[0,0,0],end:[0,l,0]}).setColor([0,1,0,g]), |
733 | CSG.roundedCylinder({start:[0,0,0],end:[0,0,l]}).setColor([0,0,1,g]) | 733 | CSG.roundedCylinder({start:[0,0,0],end:[0,0,l]}).setColor([0,0,1,g]) |
734 | ]); | 734 | ]); |
735 | } | 735 | } |
736 | 736 | ||
737 | function P(x) { | 737 | function P(x) { |
738 | return x.connectTo(x.properties.P,new CSG.Connector([0,0,0],[0,0,1],[1,0,0]), false, 0); | 738 | return x.connectTo(x.properties.P,new CSG.Connector([0,0,0],[0,0,1],[1,0,0]), false, 0); |
739 | } | 739 | } |
740 | 740 | ||
741 | var PARTS = { | 741 | var PARTS = { |
742 | wip: function(params) { | 742 | wip: function(params) { |
743 | return foot(); | 743 | return foot(); |
744 | return union(base_extrusions(),column_extrusions(),duet()); | 744 | return union(base_extrusions(),column_extrusions(),duet()); |
745 | alltogethernow: function(params) { | 745 | alltogethernow: function(params) { |
746 | var cols = columns(); | 746 | var cols = columns(); |
747 | var sides = base_sides(); | 747 | var sides = base_sides(); |
748 | var feet = THREEWINDS.map(function(w,i) { | 748 | var feet = THREEWINDS.map(function(w,i) { |
749 | var rv = foot(); | 749 | var rv = foot(); |
750 | rv = rv.connectTo(rv.properties.c_column,cols[i].properties.c_bottom,false,0); | 750 | rv = rv.connectTo(rv.properties.c_column,cols[i].properties.c_bottom,false,0); |
751 | return rv; | 751 | return rv; |
752 | }); | 752 | }); |
753 | var rv = union(cols).union(sides.map(union)).union(feet); | 753 | var rv = union(cols).union(sides.map(union)).union(feet); |
754 | rv.properties.P = new CSG.Connector([0,0,0],[0,0,1],[1,0,0]); | 754 | rv.properties.P = new CSG.Connector([0,0,0],[0,0,1],[1,0,0]); |
755 | return rv; | 755 | return rv; |
756 | }, | ||
757 | duetholder: function(params) { | ||
758 | return duetholder(); | ||
756 | } | 759 | } |
757 | }; | 760 | }; |
758 | 761 | ||
759 | function main(params) { | 762 | function main(params) { |
760 | var part = params.part && PARTS[params.part]; | 763 | var part = params.part && PARTS[params.part]; |
761 | if(!part) return refaxes(); | 764 | if(!part) return refaxes(); |
762 | var rv = P(part(params)); | 765 | var rv = P(part(params)); |
763 | if(!params.print) rv = rv.union(refaxes()); | 766 | if(!params.print) rv = rv.union(refaxes()); |
764 | return rv; | 767 | return rv; |
765 | } | 768 | } |
766 | 769 | ||
767 | function _main(params) { | 770 | function _main(params) { |
768 | var e = EFFECTOR.effector(); | 771 | var e = EFFECTOR.effector(); |
769 | var hs = E3DV6.heatsink(); | 772 | var hs = E3DV6.heatsink(); |
770 | hs = hs.connectTo(hs.properties.grove_connector,e.properties.grove_connector,false,0); | 773 | hs = hs.connectTo(hs.properties.grove_connector,e.properties.grove_connector,false,0); |
771 | var ms = microswitch(); | 774 | var ms = microswitch(); |
772 | var hd = EFFECTOR.hinged({ | 775 | var hd = EFFECTOR.hinged({ |
773 | microswitch:ms,effector:e | 776 | microswitch:ms,effector:e |
774 | }); | 777 | }); |
775 | ms = ms.connectTo( | 778 | ms = ms.connectTo( |
776 | ms.properties.screw_connector[0], | 779 | ms.properties.screw_connector[0], |
777 | hd.properties.microswitch_screw_connector[0], | 780 | hd.properties.microswitch_screw_connector[0], |
778 | false, 0); | 781 | false, 0); |
779 | var hdhd = EFFECTOR.split_hinged(hd); | 782 | var hdhd = EFFECTOR.split_hinged(hd); |
780 | var fh = EFFECTOR.fanholder(); | 783 | var fh = EFFECTOR.fanholder(); |
781 | return union({ | 784 | return union({ |
782 | platform: e, | 785 | platform: e, |
783 | hinged: hdhd[1], | 786 | hinged: hdhd[1], |
784 | clamp: hdhd[0], | 787 | clamp: hdhd[0], |
785 | fanholder: fh, | 788 | fanholder: fh, |
786 | alltogethernow: [e,hdhd[0],hdhd[1], columns(),hs,ms,fh] | 789 | alltogethernow: [e,hdhd[0],hdhd[1], columns(),hs,ms,fh] |
787 | }[params.part||'alltogethernow']) | 790 | }[params.part||'alltogethernow']) |
788 | var rv = union( | 791 | var rv = union( |
789 | e, | 792 | e, |
790 | hs, | 793 | hs, |
791 | columns(), | 794 | columns(), |
792 | ///hd, | 795 | ///hd, |
793 | hdhd[0], hdhd[1], | 796 | hdhd[0], hdhd[1], |
794 | ms); | 797 | ms); |
795 | return rv; | 798 | return rv; |
796 | } | 799 | } |
797 | 800 | ||
798 | function getParameterDefinitions() { | 801 | function getParameterDefinitions() { |
799 | return [{ | 802 | return [{ |
800 | name: 'part', | 803 | name: 'part', |
801 | type: 'choice', | 804 | type: 'choice', |
802 | values: [ | 805 | values: [ |
803 | 'platform', | 806 | 'platform', |
804 | 'hinged', | 807 | 'hinged', |
805 | 'clamp', | 808 | 'clamp', |
806 | 'fanholder', | 809 | 'fanholder', |
810 | 'duetholder', | ||
807 | 'alltogethernow', | 811 | 'alltogethernow', |
808 | 'wip' | 812 | 'wip' |
809 | ], | 813 | ], |
810 | captions: [ | 814 | captions: [ |
811 | 'Effector platform', | 815 | 'Effector platform', |
812 | 'Hinged part', | 816 | 'Hinged part', |
813 | 'Clamp', | 817 | 'Clamp', |
814 | 'Fan holder', | 818 | 'Fan holder', |
819 | 'Duet holder', | ||
815 | 'All together now!', | 820 | 'All together now!', |
816 | 'Work in progress' | 821 | 'Work in progress' |
817 | ], | 822 | ], |
818 | caption: 'Part', | 823 | caption: 'Part', |
819 | initial: 'wip' | 824 | initial: 'wip' |
820 | },{ | 825 | },{ |
821 | name: 'print', | 826 | name: 'print', |
822 | type: 'checkbox', | 827 | type: 'checkbox', |
823 | caption: 'For print, no nonsense', | 828 | caption: 'For print, no nonsense', |
824 | initial: false | 829 | initial: false |
825 | }]; | 830 | }]; |
826 | } | 831 | } |
827 | 832 | ||
828 | /* vim:set ft=javascript ai: */ | 833 | /* vim:set ft=javascript ai: */ |