| -rw-r--r-- | delta.jscad | 29 |
1 files changed, 15 insertions, 14 deletions
diff --git a/delta.jscad b/delta.jscad index 7384ecf..156e704 100644 --- a/delta.jscad +++ b/delta.jscad @@ -639,259 +639,260 @@ function foot() { })).subtract([ CSG.cylinder({ // bolt hole start: [0,0,-1], end: [0,0,F.h+1], radius: F.bolt.d/2+PRINT.slide_tolerance }), CSG.cylinder({ // nut hole start: [0,0,F.h-F.nut.h-PRINT.play_tolerance], end: [0,0,F.h], radius: F.nut.d/2+PRINT.slide_tolerance, resolution: 6 }), CSG.cylinder({ // bolthead/washer hole start: [0,0,-1], end: [0,0,F.h-F.nut.h-PRINT.play_tolerance-F.shell], radius: F.bolt.hd/2+PRINT.play_tolerance }) ]).union(CSG.cylinder({ // bridging patch start: [0,0,F.h-F.nut.h-PRINT.play_tolerance-PRINT.layer_height], end: [0,0,F.h-F.nut.h-PRINT.play_tolerance], radius: F.nut.d/2 })); rv.properties.c_column = new CSG.Connector([0,0,F.h],[0,0,1],[1,0,0]); rv.properties.c_shoe = new CSG.Connector([0,0,0],[0,0,1],[1,0,0]); rv.properties.P = new CSG.Connector([0,0,F.h],[0,0,-1],[1,0,0]); return rv.setColor(CONFIG.color.parts); } function shoe() { var F = CONFIG.foot; var rv = CSG.cylinder({ start: [0,0,0], end: [0,0,F.foot.ho], radius: F.bolt.hd/2+F.margin }).union(CSG.cylinder({ start: [0,0,0], end: [0,0,F.foot.ho+F.foot.hi], radius: F.bolt.hd/2+PRINT.play_tolerance-PRINT.fit_tolerance })); rv.properties.c_foot = new CSG.Connector([0,0,F.foot.ho],[0,0,1],[1,0,0]); rv.properties.P = new CSG.Connector([0,0,0],[0,0,1],[1,0,0]); return rv.setColor(CONFIG.color.softparts); } function duetholder() { var DH = CONFIG.duetholder; var DHD = CD.duetholder; var hw = DH.bolt.head.d+2*DH.margin; var s = DH.bolt.l-CONFIG.extrusion.slotdepth+PRINT.play_tolerance*2; var lower = CONFIG.foot.h-2*DH.s; var hl = DHD.distance-CONFIG.extrusion.w; var rv = union([ CSG.cube({ // vertical corner1: [-hw/2,s,CONFIG.extrusion.w], corner2: [hw/2,0,-lower] }), CSG.cube({ // horizontal extrusion corner1: [-hw/2,-CONFIG.extrusion.w,0], corner2: [ hw/2,0,-s] }), CSG.cube({ // horizontal corner1: [-hw/2,0,-lower], corner2: [hw/2,hl,-lower+DH.s] }), CSG.cylinder({ // boltend of horizontal part start: [0,hl,-lower], end: [0,hl,-lower+DH.s], radius: hw/2 }) ]); rv = rv.subtract([ CSG.cylinder({ // through vertical start: [0,-1,CONFIG.extrusion.w/2], end: [0,s+1,CONFIG.extrusion.w/2], radius: DH.bolt.d/2+PRINT.slide_tolerance }), CSG.cylinder({ // through horizontal to extrusion start: [0,-CONFIG.extrusion.w/2,-s-1], end: [0,-CONFIG.extrusion.w/2,1], radius: DH.bolt.d/2+PRINT.slide_tolerance }), CSG.cube({ // cut off corner1: [-hw/2-1,-2*s,0], corner2: [hw/2+1,0,-2*s] }).rotateX(45).translate([0,-CONFIG.extrusion.w,0]), CSG.cylinder({ // duet bolt start: [0,hl,-lower], end: [0,hl,-lower+DH.s], radius: DH.bolt.d/2+PRINT.slide_tolerance }) ]); var cp = [0,hl,-lower+DH.s]; rv.properties.duet = new CSG.Properties(); rv.properties.duet.c_sw = new CSG.Connector(cp,[0,0,1],[1,0,0]); rv.properties.duet.c_se = new CSG.Connector(cp,[0,0,1],[1,0,0]); rv.properties.duet.c_ne = new CSG.Connector(cp,[0,0,1],[-Math.cos(Math.PI/3),-Math.sin(Math.PI/3),0]); rv.properties.duet.c_nw = new CSG.Connector(cp,[0,0,1],[-Math.cos(Math.PI/3),Math.sin(Math.PI/3),0]); rv.properties.c_h = new CSG.Connector([0,-CONFIG.extrusion.w/2,0],[0,0,1],[1,0,0]); rv.properties.c_v = new CSG.Connector([0,0,CONFIG.extrusion.w/2],[0,-1,0],[0,0,1]); rv.properties.P = new CSG.Connector([-hw/2,0,0],[1,0,0],[0,1,0]); return rv.setColor(CONFIG.color.parts); } function heatbed() { var rv = CSG.cylinder({ start: [0,0,0], end: [0,0,CONFIG.heatbed.h], radius: CONFIG.heatbed.r, resolution: 72 }); var screw = CSG.cylinder({ start: [0,-CONFIG.heatbed.sr,-1], end: [0,-CONFIG.heatbed.sr,CONFIG.heatbed.h+1], radius: 3/2 }); var screws = []; for(var a=0;a<360;a+=60) screws.push(screw.rotateZ(a)); // TODO: connectors rv = rv.subtract(screws); rv.properties.c_glass = new CSG.Connector([0,0,CONFIG.heatbed.h],[0,0,1],[1,0,0]); rv.properties.P = new CSG.Connector( [0,0,-CONFIG.foot.h-CONFIG.extrusion.w*2-CONFIG.base.gap-CONFIG.bedholder.h], [0,0,1],[1,0,0]); rv.properties.vitamin = true; return rv.setColor(CONFIG.color.heatbed); } function glass() { var rv = CSG.cylinder({ start: [0,0,0], end: [0,0,CONFIG.glass.h], radius: CONFIG.glass.r, resolution: 72 }); rv.properties.c_bed = new CSG.Connector([0,0,0],[0,0,1],[1,0,0]); rv.properties.P = new CSG.Connector([0,0,-CONFIG.foot.h-CONFIG.heatbed.h],[0,0,1],[1,0,0]); rv.properties.vitamin = true; return rv.setColor(CONFIG.color.glass); } function platform() { var b = heatbed(); var g = glass(); g = g.connectTo(g.properties.c_bed,b.properties.c_glass,false,0); return b.union(g); } -function refaxes(o) { - if(!o) o = {}; - var l = o.l||20, g = o.g||0.7; - return union([ - CSG.roundedCylinder({start:[0,0,0],end:[l,0,0]}).setColor([1,0,0,g]), - CSG.roundedCylinder({start:[0,0,0],end:[0,l,0]}).setColor([0,1,0,g]), - CSG.roundedCylinder({start:[0,0,0],end:[0,0,l]}).setColor([0,0,1,g]) - ]); -} - -function P(x) { - return x.connectTo(x.properties.P,new CSG.Connector([0,0,0],[0,0,1],[1,0,0]), false, 0); -} - var PARTS = { wip: function(params) { return duetholder(params); return PARTS.alltogethernow(params); return base_extrusions(); return foot(); return union(base_extrusions(),column_extrusions(),duet().translate([0,-20,0])); }, alltogethernow: function(params) { var cols = columns(); var sides = base_sides(); var feet = THREEWINDS.map(function(w,i) { var rv = foot(); rv = rv.connectTo(rv.properties.c_column,cols[i].properties.c_bottom,false,0); var s = shoe(); s = s.connectTo(s.properties.c_foot,rv.properties.c_shoe,false,0); return rv.union(s); }); var dh = duetholder(); var dhsw = dh.connectTo(dh.properties.c_h, new CSG.Connector([-CONFIG.duet.hole_spacing.x/2,-CD.base.mid_inscription_r,CONFIG.foot.h],[0,0,1],[1,0,0]), false,0); var d = duet(); d = d.connectTo(d.properties.holes.c_sw,dhsw.properties.duet.c_sw,false,0); var dhse = dh.connectTo(dh.properties.duet.c_se,d.properties.holes.c_se,false,0); var dhne = dh.connectTo(dh.properties.duet.c_ne,d.properties.holes.c_ne,false,0); var dhnw = dh.connectTo(dh.properties.duet.c_nw,d.properties.holes.c_nw,false,0); var rv = union(cols).union(sides.map(union)).union(feet).union([ d,dhsw,dhse,dhne,dhnw ]); var p = P(platform()); rv = rv.union(p); rv.properties.P = new CSG.Connector([0,0,0],[0,0,1],[1,0,0]); return rv; }, duetholder: function(params) { return duetholder(); }, foot: foot, shoe: shoe }; function main(params) { var part = params.part && PARTS[params.part]; if(!part) return refaxes(); var rv = P(part(params)); if(!params.print) rv = rv.union(refaxes()); return rv; } function _main(params) { var e = EFFECTOR.effector(); var hs = E3DV6.heatsink(); hs = hs.connectTo(hs.properties.grove_connector,e.properties.grove_connector,false,0); var ms = microswitch(); var hd = EFFECTOR.hinged({ microswitch:ms,effector:e }); ms = ms.connectTo( ms.properties.screw_connector[0], hd.properties.microswitch_screw_connector[0], false, 0); var hdhd = EFFECTOR.split_hinged(hd); var fh = EFFECTOR.fanholder(); return union({ platform: e, hinged: hdhd[1], clamp: hdhd[0], fanholder: fh, alltogethernow: [e,hdhd[0],hdhd[1], columns(),hs,ms,fh] }[params.part||'alltogethernow']) var rv = union( e, hs, columns(), ///hd, hdhd[0], hdhd[1], ms); return rv; } +function refaxes(o) { + if(!o) o = {}; + var l = o.l||20, g = o.g||0.7; + return union([ + CSG.roundedCylinder({start:[0,0,0],end:[l,0,0]}).setColor([1,0,0,g]), + CSG.roundedCylinder({start:[0,0,0],end:[0,l,0]}).setColor([0,1,0,g]), + CSG.roundedCylinder({start:[0,0,0],end:[0,0,l]}).setColor([0,0,1,g]) + ]); +} + +function P(x) { + return x.connectTo(x.properties.P,new CSG.Connector([0,0,0],[0,0,1],[1,0,0]), false, 0); +} + + function getParameterDefinitions() { return [{ name: 'part', type: 'choice', values: [ 'platform', 'hinged', 'clamp', 'fanholder', 'duetholder', 'foot', 'shoe', 'alltogethernow', 'wip' ], captions: [ 'Effector platform', 'Hinged part', 'Clamp', 'Fan holder', 'Duet holder', 'Foot', 'Shoe', 'All together now!', 'Work in progress' ], caption: 'Part', initial: 'wip' },{ name: 'print', type: 'checkbox', caption: 'For print, no nonsense', initial: false }]; } /* vim:set ft=javascript ai: */ |