-rw-r--r-- | delta.jscad | 17 |
1 files changed, 17 insertions, 0 deletions
diff --git a/delta.jscad b/delta.jscad index 5be6715..fd36ba5 100644 --- a/delta.jscad +++ b/delta.jscad | |||
@@ -1,40 +1,57 @@ | |||
1 | var PRINT = { | 1 | var PRINT = { |
2 | layer_height: 0.2, | 2 | layer_height: 0.2, |
3 | extrusion_width: 0.4, | 3 | extrusion_width: 0.4, |
4 | 4 | ||
5 | fit_tolerance: .2, slide_tolerance: .4, play_tolerance: .6 | 5 | fit_tolerance: .2, slide_tolerance: .4, play_tolerance: .6 |
6 | }; | 6 | }; |
7 | 7 | ||
8 | var CONFIG = { | 8 | var CONFIG = { |
9 | side: { | ||
10 | el: 240, // side extrusion length | ||
11 | tl: 240+2*70, // triangle side length | ||
12 | gap: 9 // vertical gap between side extrusions | ||
13 | }, | ||
14 | column: { | ||
15 | h: 600 // column height | ||
16 | }, | ||
17 | heatbed: { | ||
18 | r: 220/2, // heatbed radius | ||
19 | sr: 220/2-4.5,// radius of the screwholes circle | ||
20 | h: 3+1.5 // thickness (including insulation) | ||
21 | }, | ||
22 | glass: { | ||
23 | r: 195/2, // glass radius | ||
24 | h: 3 // glass thickness | ||
25 | }, | ||
9 | hotend: { | 26 | hotend: { |
10 | h: 62.4, // full assembly height | 27 | h: 62.4, // full assembly height |
11 | groove: { d:12, h:6 }, // grove diameter and height | 28 | groove: { d:12, h:6 }, // grove diameter and height |
12 | ungroove: { d:16, above:3.7, below: 3+4 } | 29 | ungroove: { d:16, above:3.7, below: 3+4 } |
13 | }, | 30 | }, |
14 | effector: { | 31 | effector: { |
15 | h: 6, | 32 | h: 6, |
16 | o: 20,// offset to the rod mounts line | 33 | o: 20,// offset to the rod mounts line |
17 | rods_apart: 40, | 34 | rods_apart: 40, |
18 | cone: { shell: 1, angle: Math.PI/6 }, | 35 | cone: { shell: 1, angle: Math.PI/6 }, |
19 | rodend: { | 36 | rodend: { |
20 | joint_w: 7,// thickness of the joint | 37 | joint_w: 7,// thickness of the joint |
21 | screw_l: 20-1, // 20 with the head | 38 | screw_l: 20-1, // 20 with the head |
22 | screw_d: 3 | 39 | screw_d: 3 |
23 | }, | 40 | }, |
24 | hotend: { margin: 2 }, | 41 | hotend: { margin: 2 }, |
25 | hinge: { | 42 | hinge: { |
26 | d: 3, w: 5, margin: 2.5, | 43 | d: 3, w: 5, margin: 2.5, |
27 | h: 1+(6+3.7)/2, // elevation + grove + top | 44 | h: 1+(6+3.7)/2, // elevation + grove + top |
28 | e: 1 // elevation | 45 | e: 1 // elevation |
29 | }, | 46 | }, |
30 | clamp: { | 47 | clamp: { |
31 | shell: 4.6, | 48 | shell: 4.6, |
32 | d: 3, | 49 | d: 3, |
33 | margin: 2.5, | 50 | margin: 2.5, |
34 | split: 0.6 | 51 | split: 0.6 |
35 | }, | 52 | }, |
36 | mswitch: { | 53 | mswitch: { |
37 | size: [ 19.8, 6, 10 ], | 54 | size: [ 19.8, 6, 10 ], |
38 | screw: { | 55 | screw: { |
39 | d: 2, h: 10/2-2, | 56 | d: 2, h: 10/2-2, |
40 | s: 1.3, // screw shell | 57 | s: 1.3, // screw shell |