summaryrefslogtreecommitdiffabout
authorzautrix <zautrix>2004-10-28 10:27:24 (UTC)
committer zautrix <zautrix>2004-10-28 10:27:24 (UTC)
commit61d9eb436349a841410559f51e2601a34ceb5794 (patch) (side-by-side diff)
tree212eb5334caa3a588c67fd233ff2daea7ca82473
parent2053551b364bed36af4c849400654f7785743543 (diff)
downloadkdepimpi-61d9eb436349a841410559f51e2601a34ceb5794.zip
kdepimpi-61d9eb436349a841410559f51e2601a34ceb5794.tar.gz
kdepimpi-61d9eb436349a841410559f51e2601a34ceb5794.tar.bz2
added sync howto
Diffstat (more/less context) (ignore whitespace changes)
-rw-r--r--bin/kdepim/MultiSyncHowTo.txt294
-rw-r--r--bin/kdepim/Zaurus-KDE_syncHowTo.txt8
2 files changed, 297 insertions, 5 deletions
diff --git a/bin/kdepim/MultiSyncHowTo.txt b/bin/kdepim/MultiSyncHowTo.txt
new file mode 100644
index 0000000..25e5be8
--- a/dev/null
+++ b/bin/kdepim/MultiSyncHowTo.txt
@@ -0,0 +1,294 @@
+
+HAS TO BE WRITTEN
+
+Sync HowTo Zaurus <-> KDE
+
+
+This is a
+Sync HowTo Zaurus <-> K-Desktop Environment(KDE)
+using the KDE-Pim/Pi applications
+KAddressbook/Pi (KA/Pi) and KOrganizer/Pi (KO/Pi)
+on the Zaurus (Z).
+
+You can now easily sync your Z with the
+PIM data of the KDE.
+(addressbook and calendar data).
+You need to install the desktop versions
+of KA/Pi+KO/Pi on the desktop.
+You need KDE version 3.3.0 or higher on your desktop.
+You need KA/Pi+KO/Pi version 1.9.11 or higher on the desktop
+and on the Z.
+
+NOTE: Almost the same procedure will make it possible to
+sync KA/Pi+KO/Pi running on Windows with KDE via network.
+
+The setup+sync procedure is:
+
+0) How the syncing works
+1) Installing KA/Pi+KO/Pi on the Z
+2) Installing desktop version of KA/Pi+KO/Pi on the desktop
+3) Connection your Z to the desktop via network
+ (network connection can be set up via USB cable or (W)Lan
+4) Configuring KA/Pi+KO/Pi on Z for Sync
+5) Enable remote sync in KA/Pi+KO/Pi on the desktop
+6) Sync
+
+*****************************************************
+0) How the syncing works
+*****************************************************
+
+After setting up everything, the following actions will
+be performed when syncing:
+User enables "remote pi-sync" on desktop.
+User chooses "sync with configured desktop profile" on the Z.
+Z sends sync request via network to configured IP/port/password.
+KO/Pi on desktop detects sync request and syncs with KDE (configurable!).
+A window pops up, that KO/Pi on desktop is in "remote syncing mode".
+If a conflict occurs when syncing KO/PI<->KDE on the desktop,
+automatically the newest entry is choosen.
+(To avoid the need of user interaction)
+KO/Pi on desktop sends synced file to Zaurus.
+KO/Pi on desktop is in "waiting mode" to get synced file back.
+Zaurus is syncing it's own calendar with the received file.
+Here can be some user interaction needed, i.e.
+if the sync profile is configured as
+"ask for every entry on conflict" and a conflict occurs.
+Zaurus sends back synced file to desktop.
+Syncing on Zaurus is complete now.
+KO/Pi on desktop gets back synced file.
+KO/Pi on desktop removes all entries in its own calendar and
+reloads the synced file.
+KO/Pi on desktop syncs with KDE.
+After syncing with KDE is finished, KO/Pi closes
+the "remote syncing mode" window and displays
+a "syncing complete" message in the headline.
+
+The actual syncing KO/Pi on desktop <-> KDE is
+performed by a small command line tool "kdecaldump",
+which writes/reads the complete KDE calendar resources to
+a file/from a file.
+KO/Pi tags changed entries such that an unchanged entry
+is not changed in KDE by kdecaldump. That is important for
+calendar entries in KDE, stored in a "disconnected IMAP" calendar resource.
+
+
+Same way is KA/Pi working.
+
+
+*****************************************************
+1) Installing KA/Pi+KO/Pi on the Z
+*****************************************************
+
+Download latest version of KA/Pi+KO/Pi from
+http://sourceforge.net/projects/kdepimpi/
+Project KDE/Pim.
+Direct link is:
+http://sourceforge.net/project/showfiles.php?group_id=104103&package_id=112604
+Click on the version number to read the release notes/change log.
+Choose there the right precompiled package for your Z:
+For Sharp ROM
+-File: kdepim_1.x.xx_for_SharpROM.ipk.zip
+For Open Zaurus ROM:
+-File: kdepim_1.x.xx_for_OZ-gcc3xx.ipk.zip
+If unsure, choose:
+-File: kdepim_1.x.xx_for_SharpROM.ipk.zip
+
+Unzip the file and install the packages as usual on your Z.
+In order to intstall KA/Pi+KO/Pi on your Z,
+you need to install the following files:
+kmicrokdelibs_1.x.xx_arm.ipk
+kaddressbook_1.x.xx_arm.ipk
+korganizer_1.x.xx_arm.ipk
+
+*****************************************************
+2) Installing desktop version of KA/Pi+KO/Pi on the desktop
+*****************************************************
+
+Precompiled packages are available for SuSE 9.1.
+Choose on the above download location:
+File: KDE-Pim-Pi-1.9.11-SuSE9.1.i586.rpm
+Download file and install it on console with
+su
+rpm -ihv KDE-Pim-Pi-1.9.11-SuSE9.1.i586.rpm
+(NOTE:update with rpm -Uhv KDE-Pim-Pi-1.9.11-SuSE9.1.i586.rpm)
+NOTE for users of SuSE 9.1:
+You need KDE version 3.3.0 or higher on your desktop.
+Plese make an online update in SuSE (YAST), then update
+your KDE to version 3.3.0 or higher.
+You can find links to updated precompiled versions of KDE
+for SuSE 9.1 on the SusE web site,
+a direct link is for example:
+ftp://ftp.gwdg.de/pub/linux/suse/ftp.suse.com/suse/i386/supplementary/KDE/update_for_9.1
+HOWTO UPDATE KDE:
+Download there the packages in "base".
+And the needed package for your language in "internationalization".
+Put all downloaded files in one "installation" directory.
+Open console and go to the downloaded "installation" directory.
+Do there a
+su
+and then perform a test for the update:
+rpm -Uhv --test *.rpm
+
+If no dependencies are shown, you can do the actual update with
+rpm -Uhv *.rpm
+
+If there are missing dependencies, you can resolve them by
+- download the needed updated KDE package from the
+ "applications" or from the "development" folder on the server.
+- adding a needed rpm package from the SuSE install DVD
+- remove the package that has dependencies from your "installation" directory.
+
+Do the
+rpm -Uhv --test *.rpm
+until you get no dependencies and no errors, then do a
+rpm -Uhv *.rpm
+Run
+SuSEconfig
+after installing with rpm is finished.
+Restart KDE.
+
+*****************************************************
+3) Connection your Z to the desktop via network
+ (network connection can be set up via USB cable or (W)Lan
+*****************************************************
+
+a) Connection via network cable/(W)Lan cards
+ Connect your desktop to the network.
+ Set up networking on the Z.
+ Make sure, you can ping the desktop from Z.
+b) Connection via USB cable:(is working for Z 7x0 and Z5500)
+ (i) Open console on desktop and type
+ su
+ tail -f /var/log/messages
+ (ii) Connect your Z with the USB cable to your desktop
+ You should get as output in the above console
+ something like this:
+ ("BUG" is the name of the desktop computer!)
+ Oct 26 12:49:37 BUG kernel: usb 2-2: new full speed USB device using address 2
+ Oct 26 12:49:37 BUG kernel: usb 2-2: Product: SL-C860
+ Oct 26 12:49:37 BUG kernel: usb 2-2: Manufacturer: Sharp
+ Oct 26 12:49:37 BUG /etc/hotplug/usb.agent[22659]: need a device for this command
+ Oct 26 12:49:43 BUG kernel: usb0: register usbnet at usb-0000:00:1d.0-2, Sharp Zaurus, PXA-2xx based
+ Oct 26 12:49:43 BUG kernel: usbcore: registered new driver usbnet
+ You see in the 5. line ("BUG kernel: usb0: register"), that usb device usb0 is used.
+ (iii) Create a network startup entry in /etc/sysconfig/network
+ Depending of the number X of the used usb device, create a file
+ /etc/sysconfig/network/ifcfg-usbX
+ (in our case /etc/sysconfig/network/ifcfg-usb0 )
+ with the following content:
+ # usbX config for Zaurus
+ IPADDR='192.168.129.200'
+ NETMASK='255.255.255.0'
+ NETWORK='192.168.129.0'
+ BROADCAST='192.168.129.255'
+ STARTMODE='hotplug'
+ (iv) Disconnect the Z and connect the Z again to the desktop.
+ Now you should be able to ping the Z from the desktop, try in console on desktop:
+ ping 192.168.129.201
+ Now you should be able to ping the desktop from the Z, try in console on Z:
+ ping 192.168.129.200
+
+ Now you will get a network connection automatically,
+ if you connect your Z to the desktop via the USB cable.
+
+
+In the following, we assume, that
+the desktop has the IP address: 192.168.129.200
+and that
+the Z has the IP address: 192.168.129.201
+
+*****************************************************
+4) Configuring KA/Pi+KO/Pi on Z for Sync
+*****************************************************
+
+Start KO/Pi on the Z.
+Choose Menu: Synchronize - Configure
+Fill in name for "Local device name:", e.g. "Z760"
+Click on "New profile"
+Set name of "Profile:", e.g. "BUG".
+(that is the above name of the desktop computer)
+Choose "Profile kind": Pi-Sync.
+Set "Password for remote access", e.g. "xyz" for
+Calendar and Addressbook.
+Set Remote IP address to 192.168.129.200 for
+Calendar and Addressbook.
+(Note: That is the IP address of the desktop!).
+The "Remote port number" is 9197/9198 for
+Calendar and Addressbook.
+You do not have to change the
+"Remote port number" or any other settings.
+Click "OK" button to save your settings.
+
+Now you have configured KA/Pi+KO/Pi sync on the Z,
+no need to configure anything in KA/Pi.
+
+
+*****************************************************
+5) Enable remote sync in KA/Pi+KO/Pi on the desktop
+*****************************************************
+
+Start KO/Pi on the desktop.
+Do a "test" sync with KDE, choose menu:
+Synchronize - KDE_Desktop
+After syncing, you should have the same data in KDE
+and in KO/Pi.
+NOTE:
+The KO/Pi version 1.9.10 had the bug, that on the first
+sync with KDE, all data in KDE was deleted.
+DO NOT USE VERSION 1.9.10!
+
+The bevaviour on the first sync is
+(in versions >= 1.9.11)
+that no data is deleted, the data in KO/Pi and in
+KDE is merged into one calendar.
+
+When the first sync was ok, please choose menu:
+Synchronize - Enable Pi-sync
+Fill in the values for port ("9197" in our examle)
+and for the password ( "xyz" in our example)
+that you did configure on the Z for that computer.
+Enable "Automatically start at application start"
+and "Automatically sync with KDE-Desktop when receiving sync request"
+by checking the two boxes.
+Close KO/Pi.
+
+Configure / test KA/Pi on the desktop in the same way.
+Fill in the right value for the port (9198 in our examle)
+in KA/Pi!
+
+*****************************************************
+6) Sync
+*****************************************************
+
+After configuring everything as above, you have to do
+the following, if you want to sync your Zaurus with KDE:
+(It syncs will all resources in KDE, that are not "readonly").
+
+Start KO/Pi on the desktop.
+If Kontact or KOrganizer is running, save the calendar!
+Connect the Z with the USB cable to your desktop.
+(Or to the local network).
+Choose on the Z the menu:
+Syncronize - <your name for the desktop sync profile>
+( that was "BUG" in our example ).
+That's all.
+
+Do the same with KA/Pi.
+
+NOTE:
+If an appointment/addressee is created on the Z, it is added to the
+standard resource in KDE.
+
+If you have todos with subtodos in your calendar, you will get on
+every sync (after you restartet KOrganizer or Kontact in KDE)
+the message "xx items changed on local", where
+xx is greater or equal to the number of todos.
+That behaviour is caused by a bug in KDE.
+(In KDE, everytime a subtodo is loaded,
+it's "last modified" settings are set to the current time - ouch!)
+I hope I can fix this bug in KDE soon.
+
+
+
+
+
diff --git a/bin/kdepim/Zaurus-KDE_syncHowTo.txt b/bin/kdepim/Zaurus-KDE_syncHowTo.txt
index 5aad5da..6ceabdb 100644
--- a/bin/kdepim/Zaurus-KDE_syncHowTo.txt
+++ b/bin/kdepim/Zaurus-KDE_syncHowTo.txt
@@ -1,17 +1,15 @@
Sync HowTo Zaurus <-> KDE
-NOTE:
-CURRENTLY ONLY SYNCING OF CALENDAR DATA IS SUPPORTED!
This is a
Sync HowTo Zaurus <-> K-Desktop Environment(KDE)
using the KDE-Pim/Pi applications
KAddressbook/Pi (KA/Pi) and KOrganizer/Pi (KO/Pi)
on the Zaurus (Z).
You can now easily sync your Z with the
PIM data of the KDE.
(addressbook and calendar data).
You need to install the desktop versions
of KA/Pi+KO/Pi on the desktop.
@@ -97,29 +95,29 @@ Unzip the file and install the packages as usual on your Z.
In order to intstall KA/Pi+KO/Pi on your Z,
you need to install the following files:
kmicrokdelibs_1.x.xx_arm.ipk
kaddressbook_1.x.xx_arm.ipk
korganizer_1.x.xx_arm.ipk
*****************************************************
2) Installing desktop version of KA/Pi+KO/Pi on the desktop
*****************************************************
Precompiled packages are available for SuSE 9.1.
Choose on the above download location:
-File: KDE-Pim-Pi-1.9.10-SuSE9.1.i586.rpm
+File: KDE-Pim-Pi-1.9.11-SuSE9.1.i586.rpm
Download file and install it on console with
su
-rpm -ihv KDE-Pim-Pi-1.9.10-SuSE9.1.i586.rpm
-
+rpm -ihv KDE-Pim-Pi-1.9.11-SuSE9.1.i586.rpm
+(NOTE:update with rpm -Uhv KDE-Pim-Pi-1.9.11-SuSE9.1.i586.rpm)
NOTE for users of SuSE 9.1:
You need KDE version 3.3.0 or higher on your desktop.
Plese make an online update in SuSE (YAST), then update
your KDE to version 3.3.0 or higher.
You can find links to updated precompiled versions of KDE
for SuSE 9.1 on the SusE web site,
a direct link is for example:
ftp://ftp.gwdg.de/pub/linux/suse/ftp.suse.com/suse/i386/supplementary/KDE/update_for_9.1
HOWTO UPDATE KDE:
Download there the packages in "base".
And the needed package for your language in "internationalization".
Put all downloaded files in one "installation" directory.