fixx

7 files changed, 38 insertions, 12 deletions

diff --git a/bin/kdepim/kaddressbook/germantranslation.txt b/bin/kdepim/kaddressbook/germantranslation.txt
index 293aaea..ece26d2 100644
--- a/bin/kdepim/kaddressbook/germantranslation.txt
+++ b/bin/kdepim/kaddressbook/germantranslation.txt
@@ -719,102 +719,102 @@
 { "Warning","Warnung" },

 { "Select week number","Wähle Wochen Nummer" },

 { "Februar","Februar" },

 { "Pi-Sync options for device: ","Pi-Sync Einstellungen für Gerät: " },

 { "Password for remote access:","Passwort für fernen Zugriff:" },

 { "Remote IP address:","Ferne IP Adresse:" },

 { "Remote port number:","Ferne Port Nummer:" },

 { "Remote file saved to temp file.","Ferne Daten in temp Datei gespeichert." },

 { "Remote from: ","Fern von: " },

 { "Local from: ","Lokal von: " },

 { "Synchronization summary:\n\n %d items added to local\n %d items added to remote\n %d items updated on local\n %d items updated on remote\n %d items deleted on local\n %d items deleted on remote\n %d incoming filtered out\n %d outgoing filtered out\n","Synchronisationsübersicht:\n\n %d lokal hinzugefügt\n %d fern hinzugefügt\n %d lokal geändert\n %d fern geändert\n %d lokal gelöscht\n %d fern gelöscht\n %d eingehende ausgefiltert\n %d ausgehende ausgefiltert\n" },

 { "Local calendar changed!\n","Lokaler Kalender geändert!\n" },

 { "Write back","Schreibe zurück" },

 { "Pi-Sync succesful!","Pi-Sync erfolgreich!" },

 { "Received sync request","Sync Anfrage erhalten" },

 { "Synchronizing from remote ...\n\nDo not use this application!\n\nIf syncing fails\nyou can close this dialog.","Ferne Synchronisation ...\n\nBenutze diese Anwendung nicht!\n\nWenn das Syncen fehlschlägt kann\ndieser Dialog geschlossen werden." },

 { "Saving Data to temp file ...","Speichere Daten in temp Datei..." },

 { "Data saved to temp file!","Daten in temp Datei gespeichert!" },

 { "Sending file...","Sende Datei..." },

 { "Waiting for synced file...","Warte auf gesyncte Daten..." },

 { "Receiving synced file...","Gesyncte Daten erhalten..." },

 { "Received %1 bytes","%1 Bytes erhalten" },

 { "Writing file to disk...","Speichere Datei..." },

 { "Pi-Sync successful!","Pi-Sync erfolgreich!" },

 { "Clock skew of\nsyncing devices\nis %1 seconds!","Uhrzeitunterschied der\nsyncenden Geräte\nist %1 Sekunden!" },

 { "Synchronize!","Synchronisiere!" },

 { "High clock skew!","Großer Uhrzeitunterschied!" },

 { "ADJUST\nYOUR\nCLOCKS!","JUSTIERE\nDIE\nUHREN!" },

 { "The clocks of the syncing\ndevices have a difference\nof more than 5 minutes.\nPlease adjust your clocks.\nYou may get wrong syncing results!\nPlease confirm synchronization!","Die Uhren der syncenden Geräte\nhaben einen Unterschied von\nmehr als 5 Minuten. Bitte die\nUhrzeiten anpassen. Sie können\nfalsche Sync-Resultate erhalten!\nBitte das Syncen bestätigen!" },

 { "Change search field enable jump bar","Ändere Suchfeld um Jumpbar anzuzeigen" },

 { "Search with '*' prefix (wildcard)","Suche mit '*' Prefix (Wildcard)" },

 { "Shrink searchfield in portrait view","Verkleinere Suchfeld im Portraitmodus" },

 { "Edit new contact","Bearbeite neuen Kontakt" },

 { "Edit ","Bearbeite " },

 { "No contact changed!","Kein Kontakt verändert" },

 { "%1 contacts changed!","%1 Kontakte geändert!" },

 { "Mobile (home)","Handy (Arbeit)" },

 { "Mobile (work)","Handy (Privat)" },

 { "Def.Formatted Name","Def. Format. Name" },

 { "Colors","Farben" },

 { "Alternating background of list views","Abwechselnder Hintergrund für Listen" },

 { "Backup enabled","Backup angeschaltet" },

 { "Use standard backup dir","Standard Backupverzeichnis" },

 { "Number of Backups:","Anzahl der Backups" },

 { "Make backup every ","Mache ein Backup alle " },

 { " days"," Tage" },

 { "Creating backup ... please wait ...","Erzeuge Backup ... bitte warten ..." },

 { "Backup Failed!","Backup Problem!" },

 { "Try again now","Versuche jetzt nochmal" },

 { "Try again later","Versuche später nochmal" },

 { "Try again tomorrow","Versuche morgen nochmal" },

 { "Disable backup","Schalte Backup ab" },

 { "<b>Backup directory does not exist: </b>","<b>Backup Verzeichnis existiert nicht: </b>" },

 { "<b>The backup copy command failed!</b>","<b>Das Backup Kopierkommando is fehlgeschlagen!</b>" },

 { "Choose action","Wähle Aktion" }, 

 { "&Configure KA/Pi...","Konfiguriere KA/Pi..." },

 { "Global Settings...","Globale Einstellungen..." },

 { "Spouse","Ehegatte" },

 { "Notes","Notizen" },

 { "Messanger","Messanger" },

 { "Assistant","Assistent" },

 { "Manager","Manager" },

 { "Secrecy","Sichtbar" },

 { "male","männlich" },

 { "female","weiblich" },

 { "Hide!","Verbergen!" },

 { "Show!","Anzeigen!" },

 { "Details","Details" },

 { "Search:","Suche:" },

 { "Automatically sync with KDE-Desktop\nwhen receiving sync request","Synce automatisch mit KDE-Desktop\nwenn eine Sync-Anforderung kommt" },

 { "Pi-Sync Port Error","Pi-Sync Port Fehler" },

 { "<b>Enabling Pi-Sync failed!</b> Failed to bind or listen to the port %1! Is another instance already listening to that port?","<b>Anschalten von Pi-Sync fehlgeschlagen!</b> Fehler beim Ansprechen des Ports %1! Ist bereits eine andere Anwendung dabei diesen Port zu nutzen?" },

 { "No valid port number:\n%1","Keine gültige Port Nummer:\n%1" },

 { "Port number (Default: %1)\nValid range from 1 to 65535","Port Nummer (Standard: %1)\nGültiger Bereich von 1 bis 65535" },

 { "Pi-Sync Error","Pi-Sync Fehler" },

 { "Got send file request\nwith invalid password","Erhielt "sende Datei" Anfrage\nmit ungültigem Passwort" },

 { "Got receive file request\nwith invalid password","Erhielt "empfange Datei" Anfrage\nmit ungültigem Passwort" },

 { "Wrong password: Receiving remote file failed.","Falsches Passwort: Empfangen von entfernter Datei fehlgeschlagen." },

 { "Please close error dialog on remote.","Bitte schließe Fehler-Dialog am entfernten Rechner" },

 { "Unknown error on remote.","Unbekannter Fehler am entfernten Rechner" },

 { "Pi-Sync: Connected!","Pi-Sync: Verbunden!" },

 { "Receiving file from remote...","Empfange entfernte Datei..." },

 { "Sending back synced file...","Sende synchronisierte Datei zurück..." },

 { "Do you want to\nclear all sync info\nof all profiles?","Möchten Sie wirklich\ndie Sync-Info\nfür alle Profile\nlöschen?" },

 { "Do you want to\nclear the sync\ninfo of profile\n%1?\n","Möchten Sie wirklich\ndie Sync-Info für Profil\n%1?\nlöschen" },

 { "Sorry, no valid port.Syncing cancelled.","Sorry, kein gültiger Port. Syncing abgebrochen." },

 { "Remote port number:\n(May be: 1 - 65535)","Ferne Port Nummer:\n(Darf sein: 1 - 65535)" },

 { "Writing back file ...","Schreibe Datei zurück..." },

 { "Sending back file ...","Sende Datei zurück..." },

 { "Eeek, there I am ticklish!","Huch, da bin ich kitzlig!" },

 { "Save using LOCAL storage","Speichere nutze LOCAL Pfad" },

 { "...and %1 more\ncontact(s) selected","...und noch %1 Kontakte\n mehr ausgewählt" },

 { "Do you really\nwant to delete the\nsetected contact(s)?\n\n","Möchten Sie wirklich\ndie ausgewählten\nKontakte löschen?\n\n" },

 { "%1 contacts\nsuccessfully\nimported.","%1 Kontakte\nerfolgreich\nimportiert." },

 { "Import this contact?","Importiere diesen Kontakt?" },

 { "Import all!","Importiere alle!" },

-{ "","" },

+{ "Loading addressbook data ... please wait","Lade Adressbuchdaten ... bitte warten" },

 { "","" },

 { "","" },

 { "","" },

 { "","" },

 { "","" },
\ No newline at end of file
diff --git a/kabc/stdaddressbook.cpp b/kabc/stdaddressbook.cpp
index f17f366..a14ae20 100644
--- a/kabc/stdaddressbook.cpp
+++ b/kabc/stdaddressbook.cpp
@@ -20,200 +20,201 @@
 
 /*
 Enhanced Version of the file for platform independent KDE tools.
 Copyright (c) 2004 Ulf Schenk
 
 $Id$
 */
 
 #include <qdir.h>
 #include "resource.h"
 #include <kresources/manager.h>
 #include <kdebug.h>
 #include <klocale.h>
 #include <kstaticdeleter.h>
 #include <kstandarddirs.h>
 
 #include "stdaddressbook.h"
 
 using namespace KABC;
 
 StdAddressBook *StdAddressBook::mSelf = 0;
 bool StdAddressBook::mAutomaticSave = false;
 
 static KStaticDeleter<StdAddressBook> addressBookDeleter;
 
 QString StdAddressBook::fileName()
 {
   return locateLocal( "data", "kabc/std.vcf" );
 }
 
 QString StdAddressBook::directoryName()
 {
   return locateLocal( "data", "kabc/stdvcf" );
 }
 
 void StdAddressBook::handleCrash()
 {
   StdAddressBook::self()->cleanUp();
 }
 
 StdAddressBook *StdAddressBook::self()
 {
 
   if ( !mSelf )
   {
       QString appdir = StdAddressBook::setTempAppDir();
 // US im am not sure why I have to use the other format here??
 #ifdef KAB_EMBEDDED
     mSelf = addressBookDeleter.setObject( new StdAddressBook );
 #else //KAB_EMBEDDED
     addressBookDeleter.setObject( mSelf, new StdAddressBook );
 #endif //KAB_EMBEDDED
     KStandardDirs::setAppDir( appdir );
   }
 
   return mSelf;
 }
 
 QString StdAddressBook::setTempAppDir()
 {
     QString appDIR = KStandardDirs::appDir();
 #ifdef DESKTOP_VERSION
     QString appdir = QDir::homeDirPath();
       if ( appdir.right(1) == "\\" ||   appdir.right(1) == "/" )
           appdir += "kaddressbook/";
       else
           appdir += "/kaddressbook/";
       KStandardDirs::setAppDir( QDir::convertSeparators( appdir ));
 #else
       QString appdir = QDir::homeDirPath() + "/kdepim/apps/kaddressbook";
 
       KStandardDirs::setAppDir( appdir );
 #endif
 
     return appDIR;
 }
 StdAddressBook *StdAddressBook::self( bool onlyFastResources )
 {
 
    if ( !mSelf )
   {
       QString appdir =StdAddressBook::setTempAppDir();
 #ifdef KAB_EMBEDDED
     mSelf = addressBookDeleter.setObject( new StdAddressBook( onlyFastResources ) );
 #else //KAB_EMBEDDED
     addressBookDeleter.setObject( mSelf, new StdAddressBook( onlyFastResources ) );
 #endif //KAB_EMBEDDED
     KStandardDirs::setAppDir( appdir );
   }
   return mSelf;
 }
 
 StdAddressBook::StdAddressBook()
   : AddressBook( "kabcrc" )
 {
 
-  init( false );
+    //init( false );
 }
 
 StdAddressBook::StdAddressBook( bool onlyFastResources )
   : AddressBook( "kabcrc" )
 {
 
-  init( onlyFastResources );
+    if ( onlyFastResources )
+        init( onlyFastResources );
 }
 
 StdAddressBook::~StdAddressBook()
 {
   if ( mAutomaticSave )
     save();
 }
 
 void StdAddressBook::init( bool )
 {
   KRES::Manager<Resource> *manager = resourceManager();
   KRES::Manager<Resource>::ActiveIterator it;
 
   for ( it = manager->activeBegin(); it != manager->activeEnd(); ++it ) {
     (*it)->setAddressBook( this );
     if ( !(*it)->open() )
       error( QString( "Unable to open resource '%1'!" ).arg( (*it)->resourceName() ) );
   }
 
   Resource *res = standardResource();
   if ( !res ) {
     res = manager->createResource( "file" );
     if ( res )
     {
       addResource( res );
     }
     else
         qDebug(" No resource available!!!");
   }
 
   setStandardResource( res );
   manager->writeConfig();
 
   load();
 }
 
 bool StdAddressBook::save()
 {
   kdDebug(5700) << "StdAddressBook::save()" << endl;
 
   bool ok = true;
   AddressBook *ab = self();
 
   ab->deleteRemovedAddressees();
   Iterator ait;
   for ( ait = ab->begin(); ait != ab->end(); ++ait ) {
       if ( !(*ait).IDStr().isEmpty() ) {
           (*ait).insertCustom( "KADDRESSBOOK", "X-ExternalID", (*ait).IDStr() );
     }
   }
   KRES::Manager<Resource>::ActiveIterator it;
   KRES::Manager<Resource> *manager = ab->resourceManager();
   for ( it = manager->activeBegin(); it != manager->activeEnd(); ++it ) {
     if ( !(*it)->readOnly() && (*it)->isOpen() ) {
       Ticket *ticket = ab->requestSaveTicket( *it );
 //        qDebug("StdAddressBook::save '%s'", (*it)->resourceName().latin1() );
       if ( !ticket ) {
         ab->error( i18n( "Unable to save to resource '%1'. It is locked." )
                    .arg( (*it)->resourceName() ) );
         return false;
       }
 
       if ( !ab->save( ticket ) )
         ok = false;
     }
   }
 
   return ok;
 }
 
 void StdAddressBook::close()
 {
 //US destructObject is not defined on my system???. Is setObject(0) the same ???
 //US  addressBookDeleter.destructObject();
   addressBookDeleter.setObject(0);
 
 }
 
 void StdAddressBook::setAutomaticSave( bool enable )
 {
   mAutomaticSave = enable;
 }
 
 bool StdAddressBook::automaticSave()
 {
   return mAutomaticSave;
 }
 
 // should get const for 4.X
 Addressee StdAddressBook::whoAmI()
 {
 //US  KConfig config( "kabcrc" );
   KConfig config( locateLocal("config", "kabcrc") );
   config.setGroup( "General" );
 
   return findByUid( config.readEntry( "WhoAmI" ) );
diff --git a/kabc/stdaddressbook.h b/kabc/stdaddressbook.h
index 9ec53b0..cf130b3 100644
--- a/kabc/stdaddressbook.h
+++ b/kabc/stdaddressbook.h
@@ -41,111 +41,111 @@ namespace KABC {
   It's implemented as a singleton. Use @ref self() to get the address book
   object. On the first self() call the address book also gets loaded.
   
   Example:
  
   <pre>
   KABC::AddressBook *ab = KABC::StdAddressBook::self();
  
   KABC::AddressBook::Iterator it;
   for ( it = ab->begin(); it != ab->end(); ++it ) {
     kdDebug() << "UID=" << (*it).uid() << endl;
  
     // do some other stuff
   }
  
   KABC::StdAddressBook::save();
   </pre>
 */
 class StdAddressBook : public AddressBook
 {
   public:
 
     /**
       Destructor.
      */
     ~StdAddressBook();
 
     /**
       Return the standard addressbook object. It also loads slow resources.
       It is the same as self(false); .
     */
     static StdAddressBook *self();
 
     /**
       This is the same as above, but with specified
       behaviour of resource loading.
 
       @param onlyFastResource Only resources marked as 'fast' should be loaded
     */
     // FIXME for KDE4 return StdAddressBook and merge with the metod above -zecke
     static StdAddressBook *self( bool onlyFastResources );
 
     /**
       Save the standard address book to disk.
     */
     static bool save();
 
     /**
       Call this method in your crash handler to allow the library clean up
       possible locks.
      */
     static void handleCrash();
 
     /**
       Returns the default file name for vcard-based addressbook
     */
     static QString fileName();
 
     /**
       Returns the default directory name for vcard-based addressbook
     */
     static QString directoryName();
     
     /**
       Set the automatic save property of the address book.
       If @p enable is TRUE (default) the address book is saved at
       destruction time otherwise you have to call @ref save() to
       explicitely save it.
      */
     static void setAutomaticSave( bool enable );
 
     /**
       Closes the address book. Depending on @ref automaticSave() it will
       save the address book first.
     */
     static void close();
 
     /**
       Returns whether the address book is saved at destruction time.
       See also @ref setAutomaticSave().
      */
     static bool automaticSave();
 
     /**
       Returns the contact, that is associated with the owner of the
       address book. This contact should be used by other programs
       to access user specific data.
      */
     Addressee whoAmI();
 
     /**
       Sets the users contact. See @ref whoAmI() for more information.
 
       @param uid The uid of the users contact.
      */
     void setWhoAmI( const Addressee &addr );
+    void init( bool onlyFastResources );
 
   protected:
     StdAddressBook();
     StdAddressBook( bool onlyFastResources );
 
-    void init( bool onlyFastResources );
 
   private:
     static  QString setTempAppDir();
     static StdAddressBook *mSelf;
     static bool mAutomaticSave;
 };
 
 }
 #endif
diff --git a/kaddressbook/kabcore.cpp b/kaddressbook/kabcore.cpp
index b9830b1..c670b1f 100644
--- a/kaddressbook/kabcore.cpp
+++ b/kaddressbook/kabcore.cpp
@@ -310,195 +310,218 @@ KABCore::KABCore( KXMLGUIClient *client, bool readWrite, QWidget *parent, const
   mAddressBook->setErrorHandler( new KABC::GUIErrorHandler );
 #endif //KAB_EMBEDDED
 
   connect( mAddressBook, SIGNAL( addressBookChanged( AddressBook * ) ),
            SLOT( addressBookChanged() ) );
 
 #if 0
   // LR moved to addressbook init method
   mAddressBook->addCustomField( i18n( "Department" ), KABC::Field::Organization,
                                 "X-Department", "KADDRESSBOOK" );
   mAddressBook->addCustomField( i18n( "Profession" ), KABC::Field::Organization,
                                 "X-Profession", "KADDRESSBOOK" );
   mAddressBook->addCustomField( i18n( "Assistant's Name" ), KABC::Field::Organization,
                                 "X-AssistantsName", "KADDRESSBOOK" );
   mAddressBook->addCustomField( i18n( "Manager's Name" ), KABC::Field::Organization,
                                 "X-ManagersName", "KADDRESSBOOK" );
   mAddressBook->addCustomField( i18n( "Spouse's Name" ), KABC::Field::Personal,
                                 "X-SpousesName", "KADDRESSBOOK" );
   mAddressBook->addCustomField( i18n( "Office" ), KABC::Field::Personal,
                                 "X-Office", "KADDRESSBOOK" );
   mAddressBook->addCustomField( i18n( "IM Address" ), KABC::Field::Personal,
                                 "X-IMAddress", "KADDRESSBOOK" );
   mAddressBook->addCustomField( i18n( "Anniversary" ), KABC::Field::Personal,
                                 "X-Anniversary", "KADDRESSBOOK" );
 
   //US added this field to become compatible with Opie/qtopia addressbook
   // values can be "female" or "male" or "". An empty field represents undefined.
   mAddressBook->addCustomField( i18n( "Gender" ), KABC::Field::Personal,
                                 "X-Gender", "KADDRESSBOOK" );
   mAddressBook->addCustomField( i18n( "Children" ), KABC::Field::Personal,
                                 "X-Children", "KADDRESSBOOK" );
   mAddressBook->addCustomField( i18n( "FreeBusyUrl" ), KABC::Field::Personal,
                                 "X-FreeBusyUrl", "KADDRESSBOOK" );
 #endif
   initGUI();
 
   mIncSearchWidget->setFocus();
 
 
   connect( mViewManager, SIGNAL( selected( const QString& ) ),
            SLOT( setContactSelected( const QString& ) ) );
   connect( mViewManager, SIGNAL( executed( const QString& ) ),
            SLOT( executeContact( const QString& ) ) );
 
   connect( mViewManager, SIGNAL( deleteRequest( ) ),
            SLOT( deleteContacts( ) ) );
   connect( mViewManager, SIGNAL( modified() ),
            SLOT( setModified() ) );
 
   connect( mExtensionManager, SIGNAL( modified( const KABC::Addressee::List& ) ), this, SLOT( extensionModified( const KABC::Addressee::List& ) ) );
   connect( mExtensionManager, SIGNAL( changedActiveExtension( int ) ), this, SLOT( extensionChanged( int ) ) );
 
   connect( mXXPortManager, SIGNAL( modified() ),
            SLOT( setModified() ) );
 
   connect( mJumpButtonBar, SIGNAL( jumpToLetter( const QString& ) ),
            SLOT( incrementalSearchJump( const QString& ) ) );
   connect( mIncSearchWidget, SIGNAL( fieldChanged() ),
            mJumpButtonBar, SLOT( recreateButtons() ) );
 
   connect( mDetails, SIGNAL( sendEmail( const QString& ) ),
            SLOT( sendMail( const QString& ) ) );
 
 
   connect( ExternalAppHandler::instance(), SIGNAL (requestForNameEmailUidList(const QString&, const QString&)),this, SLOT(requestForNameEmailUidList(const QString&, const QString&)));
   connect( ExternalAppHandler::instance(), SIGNAL (requestForDetails(const QString&, const QString&, const QString&, const QString&, const QString&)),this, SLOT(requestForDetails(const QString&, const QString&, const QString&, const QString&, const QString&)));
   connect( ExternalAppHandler::instance(), SIGNAL (requestForBirthdayList(const QString&, const QString&)),this, SLOT(requestForBirthdayList(const QString&, const QString&)));
   connect( ExternalAppHandler::instance(), SIGNAL (nextView()),this, SLOT(setDetailsToggle()));
   connect( ExternalAppHandler::instance(), SIGNAL (doRingSync()),this, SLOT( doRingSync()));
   connect( ExternalAppHandler::instance(), SIGNAL (callContactdialog()),this, SLOT(callContactdialog()));
 
 
 #ifndef KAB_EMBEDDED
   connect( mViewManager, SIGNAL( urlDropped( const KURL& ) ),
            mXXPortManager, SLOT( importVCard( const KURL& ) ) );
 
   connect( mDetails, SIGNAL( browse( const QString& ) ),
            SLOT( browse( const QString& ) ) );
 
 
   mAddressBookService = new KAddressBookService( this );
 
 #endif //KAB_EMBEDDED
 
   mMessageTimer = new QTimer( this ); 
   connect( mMessageTimer, SIGNAL( timeout() ), this, SLOT( setCaptionBack() ) );
   mEditorDialog = 0;
   createAddresseeEditorDialog( this );
   setModified( false );  
   mBRdisabled = false;
 #ifndef DESKTOP_VERSION
   infrared  = 0;
 #endif
   //toggleBeamReceive( );
   mMainWindow->toolBar()->show();
   // we have a toolbar repainting error on the Zaurus when starting KA/Pi
-    QTimer::singleShot( 10, this , SLOT ( updateToolBar())); 
+  //QTimer::singleShot( 10, this , SLOT ( updateToolBar())); 
+    QTimer::singleShot( 100, this, SLOT ( loadDataAfterStart() ));
+}
+void KABCore::receiveStart( const QCString& cmsg, const QByteArray& data )
+{
+    qDebug("KO: QCOP start message received: %s ", cmsg.data()  );
+    mCStringMess = cmsg;
+    mByteData = data;
 }
 
+void  KABCore::loadDataAfterStart()
+{
+    qDebug("KABCore::loadDataAfterStart() ");
+    ((StdAddressBook*)mAddressBook)->init( true );
+        mViewManager->refreshView();
+
+#ifndef DESKTOP_VERSION  
+        disconnect(qApp, SIGNAL (appMessage ( const QCString &, const QByteArray & )), this, SLOT (receiveStart ( const QCString &, const QByteArray & )));
+        
+      QObject::connect(qApp, SIGNAL (appMessage ( const QCString &, const QByteArray & )), ExternalAppHandler::instance(), SLOT (appMessage ( const QCString &, const QByteArray & )));
+      if ( !mCStringMess.isEmpty() ) 
+          ExternalAppHandler::instance()->appMessage( mCStringMess, mByteData );
+#endif
+    QTimer::singleShot( 10, this , SLOT ( updateToolBar())); 
+    setCaptionBack();
+}
 void KABCore::updateToolBar()
 {
     static int iii = 0;
     ++iii;
     mMainWindow->toolBar()->repaintMe();
     if ( iii < 4 )
         QTimer::singleShot( 100*iii, this , SLOT ( updateToolBar())); 
 }
 KABCore::~KABCore()
 {
     //  save();
     //saveSettings();
     //KABPrefs::instance()->writeConfig();
     delete AddresseeConfig::instance();
     mAddressBook = 0;
     KABC::StdAddressBook::close();
     
     delete syncManager;
 #ifndef DESKTOP_VERSION
     if ( infrared )
         delete infrared;
 #endif
 }
 void KABCore::receive( const QCString& cmsg, const QByteArray& data )
 {
     //qDebug("KA: QCOP message received: %s ", cmsg.data()  );
     if ( cmsg == "setDocument(QString)" ) {
         QDataStream stream( data, IO_ReadOnly );
         QString fileName;
         stream >> fileName;
         recieve( fileName );
         return;
     }
 }
 void KABCore::toggleBeamReceive( )
 {
     if ( mBRdisabled  )
         return;
 #ifndef DESKTOP_VERSION
     if ( infrared ) {
         qDebug("KA: AB disable BeamReceive ");
         delete infrared;
         infrared = 0;
         mActionBR->setChecked(false);
         return;
     } 
     qDebug("KA: AB enable BeamReceive ");
     mActionBR->setChecked(true);
 
     infrared = new QCopChannel("QPE/Application/addressbook",this, "channelAB" ) ;   
     QObject::connect( infrared, SIGNAL (received ( const QCString &, const QByteArray & )),this, SLOT(receive(  const QCString&, const QByteArray& )));
 #endif
 }
 
 
 void KABCore::disableBR(bool b)
 {
 #ifndef DESKTOP_VERSION
     if ( b ) {
         if ( infrared ) {
             toggleBeamReceive( );
         }
         mBRdisabled = true;
     } else {
         if ( mBRdisabled ) {
             mBRdisabled = false;
             //toggleBeamReceive( );
         }
     }
 #endif
 
 }
 void KABCore::recieve( QString fn  )
 {
     //qDebug("KABCore::recieve ");
     int count = mAddressBook->importFromFile( fn, true );
     if ( count )
         setModified( true );
     mViewManager->refreshView();
     message(i18n("%1 contact(s) received!").arg( count ));
     topLevelWidget()->showMaximized();
     topLevelWidget()->raise();
 }
 void KABCore::restoreSettings()
 {
   mMultipleViewsAtOnce = KABPrefs::instance()->mMultipleViewsAtOnce;
 
   bool state;
 
   if (mMultipleViewsAtOnce)
     state = KABPrefs::instance()->mDetailsPageVisible;
   else
     state = false;
 
   mActionDetails->setChecked( state );
   setDetailsVisible( state );
@@ -2352,245 +2375,242 @@ void KABCore::addActionsManually()
 
 #endif //KAB_EMBEDDED
 
   mActionExport2phone->plug( ExportMenu );
  connect ( syncMenu, SIGNAL( activated ( int )  ), syncManager, SLOT (slotSyncMenu( int ) ) );
  syncManager->fillSyncMenu();
 
 }
 void KABCore::showLicence()
 {
     KApplication::showLicence();
 }
 
 void KABCore::manageCategories( )
 {
     KABCatPrefs* cp = new KABCatPrefs(); 
     cp->show();
     int w =cp->sizeHint().width() ;
     int h = cp->sizeHint().height() ;
     int dw = QApplication::desktop()->width();
     int dh = QApplication::desktop()->height();
     cp->setGeometry( (dw-w)/2, (dh - h )/2 ,w,h );
     if ( !cp->exec() ) {
         delete cp;
         return;
     }
     int count = 0;
     int cc = 0;
     message( i18n("Please wait, processing categories..."));
     if ( cp->addCat() ) {
         KABC::AddressBook::Iterator it;
         QStringList catList = KABPrefs::instance()->mCustomCategories;
         for( it = mAddressBook->begin(); it != mAddressBook->end(); ++it ) { 
             ++cc;
             if ( cc %10 == 0)
                 message(i18n("Processing contact #%1").arg(cc));
             QStringList catIncList = (*it).categories();
             int i;
             for( i = 0; i<   catIncList.count(); ++i ) {
                 if ( !catList.contains (catIncList[i])) {
                     catList.append( catIncList[i] );
                     //qDebug("add cat %s ",  catIncList[i].latin1());
                     ++count;
                 }
             }
         }
         catList.sort();
         KABPrefs::instance()->mCustomCategories = catList;
         KABPrefs::instance()->writeConfig();
         message(QString::number( count )+ i18n(" categories added to list! "));
     } else {
         QStringList catList = KABPrefs::instance()->mCustomCategories;
         QStringList catIncList;
         QStringList newCatList;
         KABC::AddressBook::Iterator it;
         for( it = mAddressBook->begin(); it != mAddressBook->end(); ++it ) { 
             ++cc;
             if ( cc %10 == 0)
                 message(i18n("Processing contact #%1").arg(cc));
             QStringList catIncList = (*it).categories();
             int i;
             if ( catIncList.count() ) {
                 newCatList.clear();
                 for( i = 0; i<   catIncList.count(); ++i ) {
                     if ( catList.contains (catIncList[i])) {
                         newCatList.append( catIncList[i] );
                     }
                 }
                 newCatList.sort();
                 (*it).setCategories( newCatList );
                 mAddressBook->insertAddressee( (*it) );
             }
         } 
         setModified( true );
         mViewManager->refreshView();
         message( i18n("Removing categories done!"));
     }
     delete cp;
 }
 void KABCore::removeVoice()
 {
     if ( KMessageBox::questionYesNo( this, i18n("After importing, phone numbers\nmay have two or more types.\n(E.g. work+voice)\nThese numbers are shown as \"other\".\nClick Yes to remove the voice type\nfrom numbers with more than one type.\n\nRemove voice type?") ) == KMessageBox::No )
         return;
     XXPortSelectDialog dlg( this, false, this );
     if ( !dlg.exec() )
         return;
     mAddressBook->setUntagged();
     dlg.tagSelected();
     message(i18n("Removing voice..."), false );
     KABC::AddressBook::Iterator it;
     for ( it = mAddressBook->begin(); it != mAddressBook->end(); ++it ) {
         if ( (*it).tagged() ) {
             (*it).removeVoice();
         }
     }
     message(i18n("Refreshing view...") );
-    qApp->processEvents();
     mViewManager->refreshView( "" );
     Addressee add;
     mDetails->setAddressee( add );
     message(i18n("Remove voice completed!") );
 
 
 
 }
 
 void KABCore::setFormattedName()
 {
     KABFormatPrefs setpref;
     if ( !setpref.exec() ) {
         return;
     }
     XXPortSelectDialog dlg( this, false, this );
     if ( !dlg.exec() )
         return;
     mAddressBook->setUntagged();
     dlg.tagSelected();
     int count = 0;
     KABC::AddressBook::Iterator it;
     bool modified = false;
     for ( it = mAddressBook->begin(); it != mAddressBook->end(); ++it ) {
         if ( (*it).tagged() ) { 
             if ( (*it).uid().left( 2 ) == "la" )
                 if ( (*it).uid().left( 19 ) == QString("last-syncAddressee-") )
                     continue;
             ++count;
             if ( count %10 == 0 )
                 message(i18n("Changing contact #%1").arg( count ) );
-            qApp->processEvents();
             QString fName;
             if ( setpref.simple->isChecked() )
                 fName = NameEditDialog::formattedName( (*it), NameEditDialog::SimpleName );
             else if ( setpref.full->isChecked() )
                 fName = NameEditDialog::formattedName( (*it), NameEditDialog::FullName );
             else if ( setpref.reverse->isChecked() )
                 fName = NameEditDialog::formattedName( (*it), NameEditDialog::ReverseName );
             else 
                 fName = (*it).organization();
             if ( setpref.setCompany->isChecked() )
                 if ( fName.isEmpty() || fName =="," )
                     fName = (*it).organization();
             (*it).setFormattedName( fName );
             (*it).setChanged( true );
             modified = true;
             (*it).setRevision( QDateTime::currentDateTime() ); 
         }
     }
     message(i18n("Refreshing view...") );
-    qApp->processEvents();
     if ( modified )
         setModified( true );
     Addressee add;
     mDetails->setAddressee( add );
     if ( count == 0 )
         message(i18n("No contact changed!") );
     else
         message(i18n("%1 contacts changed!").arg( count ) );
 }
 
 void KABCore::clipboardDataChanged()
 {
 
   if ( mReadWrite )
     mActionPaste->setEnabled( !QApplication::clipboard()->text().isEmpty() );
 
 }
 
 void KABCore::updateActionMenu()
 {
   UndoStack *undo = UndoStack::instance();
   RedoStack *redo = RedoStack::instance();
 
   if ( undo->isEmpty() )
     mActionUndo->setText( i18n( "Undo" ) );
   else
     mActionUndo->setText( i18n( "Undo %1" ).arg( undo->top()->name() ) );
 
   mActionUndo->setEnabled( !undo->isEmpty() );
 
   if ( !redo->top() )
     mActionRedo->setText( i18n( "Redo" ) );
   else
     mActionRedo->setText( i18n( "Redo %1" ).arg( redo->top()->name() ) );
 
   mActionRedo->setEnabled( !redo->isEmpty() );
 }
 
 void KABCore::configureKeyBindings()
 {
 #ifndef KAB_EMBEDDED
   KKeyDialog::configure( actionCollection(), true );
 #else //KAB_EMBEDDED
   qDebug("KABCore::configureKeyBindings() not implemented");
 #endif //KAB_EMBEDDED
 }
 
 #ifdef KAB_EMBEDDED
 void KABCore::configureResources()
 {
   KRES::KCMKResources dlg( this, "" , 0 );
 
   if ( !dlg.exec() )
     return;
   KMessageBox::information( this,  i18n("Please restart to get the \nchanged resources (re)loaded!\n") );
 }
 #endif //KAB_EMBEDDED
 
 
 /* this method will be called through the QCop interface from Ko/Pi to select addresses
  * for the attendees list of an event.
  */
 void KABCore::requestForNameEmailUidList(const QString& sourceChannel, const QString& uid)
 {
     qDebug("KABCore::requestForNameEmailUidList ");
   bool ok = false;
   mEmailSourceChannel = sourceChannel;
   mEmailSourceUID = uid; 
   QTimer::singleShot( 10,this, SLOT ( callContactdialog() ) );
     //callContactdialog();
 #if 0
   int wid = uid.toInt( &ok );
   qDebug("UID %s ", uid.latin1());
   if ( ok ) {
       if ( wid != QApplication::desktop()->width() ) {
           qDebug("KA/Pi: Request from different desktop geometry. Resizing ...");
           message( i18n("Resizing, please wait...") );
           mMainWindow->showMinimized();
           /*
           {
               QCopEnvelope e("QPE/Application/kapi", "callContactdialog()");
           }
           */
           QTimer::singleShot( 1,this, SLOT ( resizeAndCallContactdialog() ) );
           return;
       }
 
   } else {
       qDebug("KABCore::requestForNameEmailUidList:: Got invalid uid ");
   }
   callContactdialog();
   //QCopEnvelope e("QPE/Application/kapi", "callContactdialog()");
 #endif
 }
 void KABCore::resizeAndCallContactdialog()
 {
diff --git a/kaddressbook/kabcore.h b/kaddressbook/kabcore.h
index ceeeda7..42b7709 100644
--- a/kaddressbook/kabcore.h
+++ b/kaddressbook/kabcore.h
@@ -261,230 +261,234 @@ class KABCore : public QWidget, public KSyncInterface
      */
     void setModified();
     /**
       Marks the address book as modified without refreshing the view.
      */
     void setModifiedWOrefresh();
 
     /**
       Marks the address book as modified concerning the argument.
      */
     void setModified( bool modified );
 
     /**
       Returns whether the address book is modified.
      */
     bool modified() const;
 
     /**
       Called whenever an contact is modified in the contact editor
       dialog or the quick edit.
      */
     void contactModified( const KABC::Addressee &addr );
     void addrModified( const KABC::Addressee &addr, bool updateDetails = true );
 
     /**
       DCOP METHODS.
      */
     void addEmail( QString addr );
     void importVCard( const KURL& url, bool showPreview );
     void importVCard( const QString& vCard, bool showPreview );
     void newContact();
     QString getNameByPhone( const QString& phone );
     /**
       END DCOP METHODS
      */
 
     /**
       Saves the contents of the AddressBook back to disk.
      */
     void save();
 
     /**
       Undos the last command using the undo stack.
      */
     void undo();
 
     /**
       Redos the last command that was undone, using the redo stack.
      */
     void redo();
 
     /**
       Shows the edit dialog for the given uid. If the uid is QString::null,
       the method will try to find a selected addressee in the view.
      */
     void editContact( const QString &uid /*US = QString::null*/ );
 //US added a second method without defaultparameter
     void editContact2();
 
     /**
       Shows or edits the detail view for the given uid. If the uid is QString::null,
       the method will try to find a selected addressee in the view.
      */
     void executeContact( const QString &uid /*US = QString::null*/ );
 
     /**
       Launches the configuration dialog.
      */
     void openConfigDialog();
     void openConfigGlobalDialog();
 
     /**
       Launches the ldap search dialog.
      */
     void openLDAPDialog();
 
     /**
       Creates a KAddressBookPrinter, which will display the print
       dialog and do the printing.
      */
     void print();
 
     /**
       Registers a new GUI client, so plugins can register its actions.
      */
    void addGUIClient( KXMLGUIClient *client );
 
    void requestForNameEmailUidList(const QString& sourceChannel, const QString& sessionuid);
    void requestForDetails(const QString& sourceChannel, const QString& sessionuid, const QString& name, const QString& email, const QString& uid);
    void requestForBirthdayList(const QString& sourceChannel, const QString& sessionuid);
 
 
   signals:
     void contactSelected( const QString &name );
     void contactSelected( const QPixmap &pixmap );
   public slots:
+    void loadDataAfterStart();
     void recieve(QString cmsg );
     void getFile( bool success );
     void syncFileRequest();
     void setDetailsVisible( bool visible );
     void setDetailsToState();
    
     void saveSettings();
 
   private slots:
     void updateToolBar();
     void updateMainWindow();
     void receive( const QCString& cmsg, const QByteArray& data );
+    void receiveStart( const QCString& cmsg, const QByteArray& data );
     void toggleBeamReceive( );
     void disableBR(bool);
     void setJumpButtonBarVisible( bool visible );
     void setJumpButtonBar( bool visible );
     void setCaptionBack();
     void resizeAndCallContactdialog();
     void callContactdialog();
     void doRingSync();
 
   void importFromOL();
     void extensionModified( const KABC::Addressee::List &list );
     void extensionChanged( int id );
     void clipboardDataChanged();
     void updateActionMenu();
     void configureKeyBindings();
     void removeVoice();
     void setFormattedName();
 #ifdef KAB_EMBEDDED
     void configureResources();
 #endif //KAB_EMBEDDED
 
     void slotEditorDestroyed( const QString &uid );
     void configurationChanged();
     void addressBookChanged();
 
   private:
+    QCString mCStringMess;
+    QByteArray mByteData;
     QString mEmailSourceChannel;
     QString mEmailSourceUID;
     void resizeEvent(QResizeEvent* e );
     bool mBRdisabled;
 #ifndef DESKTOP_VERSION
     QCopChannel* infrared;
 #endif
     QTimer *mMessageTimer;
     void initGUI();
     void initActions();
     QString getPhoneFile();
 
     AddresseeEditorDialog *createAddresseeEditorDialog( QWidget *parent,
                                                         const char *name = 0 );
 
  KXMLGUIClient *mGUIClient;
 
   KABC::AddressBook *mAddressBook;
 
   ViewManager *mViewManager;
   // QSplitter *mDetailsSplitter;
   KDGanttMinimizeSplitter *mExtensionBarSplitter;
   ViewContainer *mDetails;
   KDGanttMinimizeSplitter* mMiniSplitter;
   XXPortManager *mXXPortManager;
   JumpButtonBar *mJumpButtonBar;
   IncSearchWidget *mIncSearchWidget;
   ExtensionManager *mExtensionManager;
 
   KCMultiDialog *mConfigureDialog;
 
 #ifndef KAB_EMBEDDED
     LDAPSearchDialog *mLdapSearchDialog;
 #endif //KAB_EMBEDDED
     // QDict<AddresseeEditorDialog> mEditorDict;
     AddresseeEditorDialog *mEditorDialog;
     bool mReadWrite;
     bool mModified;
     bool mIsPart;
     bool mMultipleViewsAtOnce;
 
 
     //US file menu
     KAction *mActionMail;
     KAction *mActionBeam;
     KToggleAction *mActionBR;
     KAction *mActionExport2phone;
     KAction* mActionPrint;
     KAction* mActionPrintDetails;
     KAction* mActionNewContact;
     KAction *mActionSave;
     KAction *mActionEditAddressee;
     KAction *mActionMailVCard;
     KAction *mActionBeamVCard;
 
     KAction *mActionQuit;
 
     //US edit menu
     KAction *mActionCopy;
     KAction *mActionCut;
     KAction *mActionPaste;
     KAction *mActionSelectAll;
     KAction *mActionUndo;
     KAction *mActionRedo;
     KAction *mActionDelete;
 
     //US settings menu
     KAction *mActionConfigResources;
     KAction *mActionConfigGlobal;
     KAction *mActionConfigKAddressbook;
     KAction *mActionConfigShortcuts;
     KAction *mActionConfigureToolbars;
     KAction *mActionKeyBindings;
     KToggleAction *mActionJumpBar;
     KToggleAction *mActionDetails;
     KAction *mActionWhoAmI;
     KAction *mActionCategories;
     KAction *mActionEditCategories;
     KAction *mActionManageCategories;
     KAction *mActionAboutKAddressbook;
     KAction *mActionLicence;
     KAction *mActionFaq;
     KAction *mActionWN;
     KAction *mActionSyncHowto;
     KAction *mActionStorageHowto;
     KAction *mActionKdeSyncHowto;
     KAction *mActionMultiSyncHowto;
 
     KAction *mActionDeleteView;
 
     QPopupMenu *viewMenu;
     QPopupMenu *filterMenu;
     QPopupMenu *settingsMenu;
     QPopupMenu *changeMenu;
     QPopupMenu *beamMenu;
 //US    QAction *mActionSave;
diff --git a/kaddressbook/kaddressbookmain.cpp b/kaddressbook/kaddressbookmain.cpp
index 519dc92..8fe3ee0 100644
--- a/kaddressbook/kaddressbookmain.cpp
+++ b/kaddressbook/kaddressbookmain.cpp
@@ -1,183 +1,185 @@
 /*
     This file is part of KAddressbook.
     Copyright (c) 1999 Don Sanders <dsanders@kde.org>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
     the Free Software Foundation; either version 2 of the License, or
     (at your option) any later version.
 
     This program is distributed in the hope that it will be useful,
     but WITHOUT ANY WARRANTY; without even the implied warranty of
     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
     GNU General Public License for more details.
 
     You should have received a copy of the GNU General Public License
     along with this program; if not, write to the Free Software
     Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
 
     As a special exception, permission is given to link this program
     with any edition of Qt, and distribute the resulting executable,
     without including the source code for Qt in the source distribution.
 */
 
 #ifdef KAB_EMBEDDED
 #include "kabprefs.h"
 #include <kglobal.h>
 #include <qmessagebox.h>
 #include <qtoolbar.h>
 #include <qapplication.h>
 #else //KAB_EMBEDDED
 #include <kedittoolbar.h>
 #include <kkeydialog.h>
 #include <kmessagebox.h>
 #include <kstatusbar.h>
 #endif //KAB_EMBEDDED
 #include <klocale.h>
 
 #include "kabcore.h"
 #include "kaddressbookmain.h"
 #include "kactioncollection.h"
 
 #ifdef KAB_EMBEDDED
 KAddressBookMain::KAddressBookMain() : KMainWindow( 0, "adrressbook" )
 #else //KAB_EMBEDDED
 //MOC_SKIP_BEGIN
 KAddressBookMain::KAddressBookMain() : DCOPObject( "KAddressBookIface" ), KMainWindow( 0 ) 
 //MOC_SKIP_END
 #endif //KAB_EMBEDDED
 {
     setIcon(SmallIcon( "ka24" )  );
 #if 0
   //US for embedded systems, create the toolbar before we initiate KABCore.
   // KABCore will fill the toolbar with menues and icons
   QMainWindow::ToolBarDock tbd;
   tbd = Top;
   iconToolBar = new QToolBar( this );
   addToolBar (iconToolBar , tbd );
   iconToolBar->setHorizontalStretchable(true);  
 //US  iconToolBar->setWidth(300);
 #endif // 0
 
   mCore = new KABCore( this, true, this );
   
 #ifdef KAB_EMBEDDED
   setCaption( i18n( "KAddressbook/Pi" ) );
 #else //KAB_EMBEDDED
   setCaption( i18n( "Address Book Browser" ) );
 #endif //KAB_EMBEDDED
 
   //mCore->restoreSettings();
 
   initActions();
 
   setCentralWidget( mCore );
 
 //US  statusBar()->show();
 
 #ifndef KAB_EMBEDDED
   setStandardToolBarMenuEnabled(true);
   
   createGUI( "kaddressbookui.rc", false );
 
 
 #endif //KAB_EMBEDDED
   setAutoSaveSettings();
-  qApp->processEvents();
   mCore->restoreSettings();
+#ifndef DESKTOP_VERSION
+      QObject::connect(qApp, SIGNAL (appMessage ( const QCString &, const QByteArray & )), mCore, SLOT (receiveStart ( const QCString &, const QByteArray & )));
+#endif
 }
 
 KAddressBookMain::~KAddressBookMain()
 {
     // mCore->saveSettings();
 }
 
 void KAddressBookMain::showMinimized () 
 {
     QWidget::showMinimized () ;
 }
 void KAddressBookMain::addEmail( QString addr )
 {
   mCore->addEmail( addr );
 }
 
 #ifndef KAB_EMBEDDED
 ASYNC KAddressBookMain::showContactEditor( QString uid )
 {
   mCore->editContact( uid );
 }
 #endif //KAB_EMBEDDED
 void KAddressBookMain::newContact()
 {
   mCore->newContact();
 }
 
 QString KAddressBookMain::getNameByPhone( QString phone )
 {
   return mCore->getNameByPhone( phone );
 }
 
 void KAddressBookMain::save()
 {
   mCore->save();
 }
 
 void KAddressBookMain::exit()
 {
   close( );
 }
 
 void KAddressBookMain::saveProperties( KConfig* )
 {
 }
 
 void KAddressBookMain::readProperties( KConfig* )
 {
 }
 
 void KAddressBookMain::initActions()
 {
 #ifndef KAB_EMBEDDED
   KStdAction::quit( this, SLOT( close() ), actionCollection() );
   KStdAction::configureToolbars( this, SLOT( configureToolbars() ), actionCollection() );
 #else //KAB_EMBEDDED
   //US: transfered the setup of the actions into KABCore
 #endif //KAB_EMBEDDED
 
   
 }
 
 //US new method to setup menues and toolbars on embedded systems
 #ifdef KAB_EMBEDDED
 /*
 QToolBar * KAddressBookMain::getIconToolBar()
 {
   return iconToolBar;
 }
 */
 
 void KAddressBookMain::createGUI()
 {
 
 
     
 }
 #endif //KAB_EMBEDDED
 
 void KAddressBookMain::configureToolbars()
 {
 #ifndef KAB_EMBEDDED
   saveMainWindowSettings( KGlobal::config(), "MainWindow" );
 
   KEditToolbar dlg( factory() );
   connect( &dlg, SIGNAL( newToolbarConfig() ), SLOT( slotNewToolbarConfig() ) );
 
   dlg.exec();
 #else  //KAB_EMBEDDED
     qDebug("KAddressBookMain::configureToolbars() not implemented by ulf" );
 #endif //KAB_EMBEDDED
 }
 
 void KAddressBookMain::slotNewToolbarConfig()
 {
 #ifndef KAB_EMBEDDED
diff --git a/kaddressbook/mainembedded.cpp b/kaddressbook/mainembedded.cpp
index 93ba53c..2f3531d 100644
--- a/kaddressbook/mainembedded.cpp
+++ b/kaddressbook/mainembedded.cpp
@@ -1,120 +1,119 @@
 #ifndef DESKTOP_VERSION
 #include <qpe/qpeapplication.h>
 #include <qcopchannel_qws.h> 
 #include <stdlib.h>
 #else
 #include <qapplication.h>
 #include <qwindowsstyle.h>
 #include <qplatinumstyle.h>
 #include <qmainwindow.h>
 #include <qmessagebox.h> 
 #include <stdlib.h>
 #endif
 
 #include <qtextcodec.h> 
 #include <kstandarddirs.h>
 #include <qregexp.h>
 #include <kglobal.h>
 #include <stdio.h>
 #include <qdir.h>
 #include "kabprefs.h"
 #include "kaddressbookmain.h"
 #include "externalapphandler.h"
 #include <libkdepim/kpimglobalprefs.h>
 void dumpMissing();
 int main( int argc, char **argv )
 {
 #ifndef DESKTOP_VERSION
   QPEApplication a( argc, argv );
   a.setKeepRunning ();
 #else
   QApplication a( argc, argv );
   QApplication::setStyle( new QPlatinumStyle ());
 #ifdef _WIN32_
   QString hdir ( getenv( "HOME") );
   if ( hdir.isEmpty() ) {
     QString hd ("C:/" );
     //QMessageBox::information(0,"hh",QDir::homeDirPath()+" xx" +hd );
     if ( QDir::homeDirPath().lower() == hd.lower() ) {
       _putenv( "HOME=C:");
       //QMessageBox::information(0,"hh",QString ( getenv( "HOME") ) );
     }
   } else {
     QDir app_dir;
     if ( !app_dir.exists(hdir) )
       app_dir.mkdir (hdir);
   }
 #endif
 #endif
 
   bool exitHelp = false;
   if ( argc > 1 ) {
       QString command = argv[1];
       if (  command == "-help" ){
           printf("KA/E command line commands:\n");
           printf("  no command: Start KA/E in usual way\n");
           printf("  -help: This output\n");
           printf(" KA/E is exiting now. Bye!\n");
           exitHelp = true;
       }
   }
   if ( ! exitHelp ) {
 
     KGlobal::setAppName( "kaddressbook" );
 #ifndef DESKTOP_VERSION
     if ( QApplication::desktop()->width() > 320 )
         KGlobal::iconLoader()->setIconPath(QString(getenv("QPEDIR"))+"/pics/kdepim/kaddressbook/icons22/");
     else
         KGlobal::iconLoader()->setIconPath(QString(getenv("QPEDIR"))+"/pics/kdepim/kaddressbook/icons16/");
 #else
       QString fileName ;
       fileName  = qApp->applicationDirPath () + "/kdepim/kaddressbook/icons22/";
       KGlobal::iconLoader()->setIconPath(QDir::convertSeparators(fileName));
       QApplication::addLibraryPath ( qApp->applicationDirPath () );
 
 #endif
       KStandardDirs::setAppDir( QDir::convertSeparators(locateLocal("data", "kaddressbook")));
     // init language
       KPimGlobalPrefs::instance()->setGlobalConfig();
       QApplication::setFont( KPimGlobalPrefs::instance()->mApplicationFont );
        KAddressBookMain m ;
 //US      MainWindow m;
-#ifndef DESKTOP_VERSION
-      QObject::connect(&a, SIGNAL (appMessage ( const QCString &, const QByteArray & )), ExternalAppHandler::instance(), SLOT (appMessage ( const QCString &, const QByteArray & )));
-#endif
+
       
       
 #ifndef DESKTOP_VERSION
        a.showMainWidget( &m ); 
       
 #else
       a.setMainWidget( &m );
       m.show();
 #endif 
+      m.setCaption(i18n("Loading addressbook data ... please wait" )); 
       a.exec();
 #ifdef DESKTOP_VERSION
   KConfig *config = KABPrefs::instance()->getConfig();
   config->setGroup("WidgetLayout");
   QStringList list ;//= config->readListEntry("MainLayout");
   int x,y,w,h;
   QWidget* wid;
   wid = &m;
   x = wid->geometry().x();
   y = wid->geometry().y();
   w = wid->width();
   h = wid->height();
   list.clear();
   list << QString::number( x );
   list << QString::number( y );
   list << QString::number( w );
   list << QString::number( h );
   config->writeEntry("MainLayout",list );
   config->sync();
 #endif
   dumpMissing();
   
   KPimGlobalPrefs::instance()->writeConfig();
   }
   qDebug("KA: Bye! ");
 }