howto files moved

2 files changed, 0 insertions, 843 deletions

diff --git a/bin/kdepim/korganizer/howtoSYNC.txt b/bin/kdepim/korganizer/howtoSYNC.txt
deleted file mode 100644
index 3cab446..0000000
--- a/bin/kdepim/korganizer/howtoSYNC.txt
+++ b/dev/null
@@ -1,483 +0,0 @@
-WARNING:
-YOU MAY GET UNEXSPECTED (I.E. WRONG) SYNCHRONIZATION RESULTS, 
-IF YOU CHANGE AN EVENT ON THE FIRST DEVICE AND SYNC IMMEDIATELY FROM
-THE OTHER DEVICE WITH THIS DEVICE, IF THE CLOCKS OF THE TWO DEVICES
-HAVE TOO MUCH DIFFERENCE.
-
-In other words: Please make shure, that the clocks of the devices 
-you want to sync have only a difference of some seconds!
-
-
-CONTENT:
-
-0) How syncing works
-1) Qick overview of settings
-2) Sync settings in sync dialog
-3) Syncing background
-4) Sync preferences
-5) Details about sync profile kinds
-
-*************************************************************************
-0) How syncing works
-*************************************************************************
-
-Note:
-The recommended and easiest way to syncronize two devices where 
-KO/Pi or KA/Pi is installed, is the profile kind "Pi-Sync".
-Details about that in 5) b).
-
-In KDE-Pim/Pi you can synchronize ( sync ) your calendar/addressbook 
-with another calendar/addressbook , by syncing  your 
-(local) calendar/addressbook  with a (remote) file. 
-This remote file may on your local filesystem
-or on another (remote) device.
-
-If you want to sync with another remote device, 
-you have two create a sync profile.
-You have two choices for choosing the profil kind:
-I)  You have to choose profile kind "Remote file" and to specify a 
-    command line download/upload command ( like scp, ftp, ...) to 
-    a) download the remote file to your local machine to a temp file
-    b) sync with this temp file
-    c) upload the synced file to the remote device
-II) If you want to sync with a device, where KO/Pi( or KA/Pi ) is
-    installed, you can easily get the remote file via network 
-    with the build in file transfer feature:
-    Choose profile kind "Pi-Sync" and
-    a) Start KO/Pi or KA/Pi on remote device and
-       enable "Pi-Sync" on remote device with password and port.
-    b) Specify password, port and IP address in your profile.
-
-
-You can sync with your mobile phone as well.
-Everything is explained in more details below.
-
-NOTE:
-If you do not use profile kind "Pi-Sync",
-it is recommended to close 
-a running KO/Pi ( or KA/Pi) on the remote device.
-(Note: KO/Pi( or KA/Pi) running on Zaurus with 
-FastLoad enabled will never be closed!)
-After syncing with a running KO/Pi on the remote device,
-a "save" on the remote device will tell you that it needs to merge (sync).
-After merging (just a syncing with the changed file) 
-you will get the new data showing in remote KO/Pi. 
-
-*************************************************************************
-1) Qick overview of settings
-*************************************************************************
-
-a) Open sync settings dialog (Menu Synchronize - Configure...)
-b) Give your device a unique name.
-   (unique in the set of all devices you want to sync with).
-   If you have already configured another devive and created 
-   there a sync profile to sync with this device, give your device
-   the same name as this sync profile! The same name is important, 
-   because it makes it possible to sync first A->B 
-   (A local device, that performs the sync, B remote device) 
-   and then B->A. Such that the B->A sync knows about the 
-   already performed A->B sync.
-   That means: It is unimportant if you sync A->B or B->A,
-   the devices A and B will be synced properly. 
-c) Create a new sync profile and give it a unique name.
-   (unique in the set of all sync profiles on this device).
-   If you want to sync with a device, where KO/Pi is already installed
-   and which has a given unique device name, use this device name as
-   your profile name ( refer to b) ).
-d) Coose the profile kind of your syncing method:
-      (i) Local file or
-     (ii) Pi-Sync or
-    (iii) Remote file or
-   (iiii) Mobile Phone.
-   Detailed explanation in 5) 
-e) Choose the other profile options.
-   Detailed explanation in 2) 
-f) Close sync dialog with OK.
-g) Sync.
-
-NOTE:
-AFTER SYNCING THERE ARE "SYNC EVENTS" CREATED 
-(OR UPDATED, IF IT ALREADY EXITS) FOR EACH SYNC PROFILE.
-YOU MAY NOT DELETE OR CHANGE THESE EVENTS. 
-
-*************************************************************************
-2) Sync settings in sync dialog
-*************************************************************************
-
-a) Local device name:
-   -> 1) b)
-b) Profile:
-   -> 1) c)
-c) Include in multiple sync:
-   In the Synchronize menu, there is a multiple sync menu entry.
-   If you choose this menu entry, all user defined profiles with this
-   'Include in multiple sync' option enabled will be  synced 
-   one after another. And this twice. This will take some time.
-   After that sync, on all devices should be the same data.
-d) Ask for preferences before sync:
-   Check this to be asked for sync preferences settings before each sync.
-   If the profile kind is "Pi-Sync" you will be asked to confirm
-   the "Pi-Sync" specific settings (Password,IP address, port number)
-   as well. That makes it possible to use that profile for a
-   device that is connected via DHCP to the network and gets different
-   IP addresses when connection to the network.
-e) Sync preferences:
-   Choose here your sync preferences.
-   Details -> 4)
-f) Show summary after sync:
-   Check this to get a small summary dialog after sync 
-   about number of added/changed/deleted events on local/remote.
-g) Write back synced data:
-   Uncheck this to update the local calendar only.
-   I.e. your local calendar is synced with the remote calendar
-   but nothing on the remote calendar is changed.
-   If you uncheck "Write back synced data", the settings
-   under h) and i) are ignored, of course.
-h) --Write back (on remote) existing entries only:
-   Check this to update the remote data only.
-   I.e. no data from yor local calendar/addressbook is added to the
-   remote device. You may use this option to 
-   sync against some kind of "public calendar/addressbook" without 
-   writing back your personal data.
-i) --Write back (calendar) entries in future only:
-   Check this to write back only calendar entries in future.
-   (Useful when syncing with mobile phones.)
-   You can specify the date range in weeks with
-   ---- Max. weeks in future.
-   Note: The date range starts always 7 days before the actual date!
-   I.e. the calendar events of the last week are written back always.
-j) Profile kind:
-   Details -> 5)
-
-*************************************************************************
-3) Syncing background
-*************************************************************************
-
-The same mentioned for calendars is valid for addressbooks as well.
-
-Synchronizing calendars ( i.e. files ) means, 
-to merge two calendars in a useful way.
-If the two calendars are completely different, 
-there is no problem, the resulting calendar contains 
-all data from the local and from the remote calendar.
-
-Problems will occur, if you have edited items 
-from the local calendar on the remote machine. 
-Then it could be, that items are in conflict. 
-Two items are "in conflict", if they have the 
-same unique ID (which get an item at time of 
-creation and owns it until it is deleted )
-and they both are modified after the last 
-synchronization.
-
-At first sync of two calendars there is no item deleted. 
-If the calendars are synced before and there is an item, 
-which is not edited after the last sync and is only 
-available in one calendar, then this item is deleted 
-in this calendar.
-
-But when was the last synchronization between two calendars?
-
-To know that, KO/Pi creates at first syncing 
-of two files an unique event "<profile name> - sync Event" 
-on the remote and the local calendar. 
-After syncing, the start time of this event is set 
-to the time of syncing. 
-The event is read only and the user may not change it.
-
-If two such files are synced, that both have an event 
-"<profile name> - sync Event" and the events have 
-the same start time, then deleted items on the one calendar 
-are deleted on the other as well.
-
-
-*************************************************************************
-4) Sync preferences
-*************************************************************************
-
-Two items are "in conflict", if they have the same unique ID 
-and they both are  modified after the last synchronization.
-(Details -> 3) ).
-
-If an item is not modified after the last sync and 
-it is not found in the other calendar, it is deleted.
-
-On the first sync, there is no item deleted.
-
-SYNC PREFERENCES:
- -Take local entry on conflict:
-  Takes the local entry on conflict. 
-  If it is the first sync, 
-  "Ask for every entry" 
-  is chosen automatically, 
-  if this is selected.
-
- -Take remote entry on conflict:
-  Takes the remote entry on conflict. 
-  If it is the first sync, 
-  "Ask for every entry" 
-  is chosen automatically, 
-  if this is selected.
-
- -Take newest entry on conflict:
-  This takes the newest entry on conflict. 
-  May be the most useful syncing mode.
-
- -Ask for every entry on conflict:
-  Pops up an event viewer dialog and 
-  shows the two conflicting entries there. 
-  The user can chose, which entry he would like to take.
-  The button for the newest entry 
-  is automatically set as default button.
-  The color for the newest entry is green.
-
- -Force: Take local entry always:
-  Even if the calendars are already synced
-  there is no item deleted on local. 
-
- -Force: Take remote entry always:
-  Analogous to  
-  "Force: Take local entry always"
-
-*************************************************************************
-5) Details about sync profile kinds
-*************************************************************************
-
-a) Local file
-   Please specify a local file you want to sync with.
-
-b) Pi-Sync (direct Kx/Pi to Kx/Pi sync)
-   We mention here only KO/Pi, but the same is valid for KA/Pi.
-   If you want to sync with a device, where KO/Pi is
-   installed, you can easily get the remote file via network 
-   with the build in file transfer feature "Pi-Sync":
-   You have first to enable file transfer on the remote device:
-   - Start KO/Pi on the remote device.
-   - Choose Menu Synchronize-Enable Pi-Sync.
-   - Choose a port number, where KO/Pi should listen for 
-     file sending requests. Valid port numbers are numbers
-     between 1 and 65565. Do not specify port numbers, that are
-     used by other applications. A port number between 9000 and 9999
-     is most likely not used by another application.
-     The default port number is 9197 for KO/Pi.
-     If you specify a port number, which is already in use,
-     you will get an error message when closing this dialog.
-   - Choose a password.
-   - Click OK.
-     Now KO/Pi will send the calendar data via the network, 
-     if some other device is sending a "please send calendar"
-     request on the given port using the given password.
-     If you want to be sure, nobody can access your calendar
-     data, simply disable the file transfer feature on the 
-     remote device after the syncing is done by choosing:
-     Menu Synchronize-Disable Pi-Sync.
-
-   Note: If you want to sync with a remote device that gets different 
-         IPaddresses each time connected to the network
-         (this may be the case, if you use DHCP for connection 
-         of the remote device to the network) simply enable
-         "Ask for preferences before sync".  
-         Then you will be asked to confirm the
-         "Pi-Sync" specific settings 
-         (Password,IP address, port number)
-         and you can easily change the IP address before each sync.
-
-   On your local device, create a new profile and choose
-   profile kind "Pi-Sync".
-   Fill in the needed values:
-   - Password for remote access:
-     The password you specified on the remote device.
-   - Remote IP address:
-     The IP address of the remote device.
-   - Remote port number:
-     The port number you specified on the remote device.
-   
-   Now you can syncronize your local device easily with your 
-   remote device. This works well for all platforms KO/Pi is 
-   running on, e.g. syncing a KO/Pi on Zaurus with KO/Pi on Windows
-   is now very easy.  
-
-c) Remote file
-   Syncing with the profile kind "Remote file" is performed in three steps:
-   i) download the remote file to your local machine to a temp file
-   ii) sync with this temp file
-   iii) upload the synced file to the remote device
-
-   The down-/uploading if i) and iii) is done via a command line command.
-   Please specify the download/upload command ( like scp, ftp, ...) and the
-   file name of the temp file in the corresponding fields.  
-
-d) Mobile device (cell phone)
-   Note: On the Zaurus you have to install the phoneaccess_xxx_arm.ipk package
-         to be able to access mobile phones.
-   We mention here only KO/Pi, but the same is valid for KA/Pi.
-   Note:
-   It is only possible to sync a mobile phone with one particular device
-   running KO/Pi. If you want to be able to write data of more than one device
-   to the mobile phone (e.g. from your Zaurus and from your Windows Laptop)
-   do not sync with the mobile phone at all, but use the 
-   "Export to phone" functionality from the different devices.
-   Using "Export to phone" makes it not possible to get back data from the
-   phone, if it was changed there, of course.
-   If you sync with the phone, do not use "Export to phone" from any device.
-   (And do not sync, as mentioned above, from any other device with that phone). 
-   It would delete the needed information for syncing with that phone!
-
-   We are using Gammu (Version: 0.98.9) ( http://freshmeat.net/projects/gammu/ ) 
-   for accessing the phones. 
-   Note: You cannot use the original Gammu for syncing KDE-Pim/Pi, because 
-   we have modified the original version to make it useable for syncing!
-   Gammu allows access to many phones in many ways (Irda, Bluetooth, serial,...).
-   The recommended phone access using Gammu with KDE-Pim/Pi is Irda (infrared).
-   Bluetooth access is disabled on the Zaurus, but may work on Windows.
-   Please look at the Gammu homepage and documentation about more details 
-   configuring Gammu how to access your phone.
-   If you have problems accessing your phone, start KO/Pi from the konsole
-   and you will get a more detailed output what went wrong.
-   About Gammu from the Gammu homepage:
-       Gammu (formerly known as MyGnokii2) is a cellular 
-       manager for various mobile phones/modems. 
-       It supports the Nokia 2100, 3100, 32xx, 33xx, 
-       3410, 35xx, 51xx, 5210, 5510, 61xx, 62xx,
-       63xx, 6510, 6610, 6800, 71xx, 7210, 7250, 
-       7250i, 82xx, 83xx, 8910, 9110, 9210 
-       and compatible and AT devices (Siemens, Alcatel, 
-       Falcom, WaveCom, IPAQ, Samsung, SE, and others) 
-       over cables/infrared/BlueTooth.
-   
-   Here is an example what to specify to access a Nokia 6310i via infrared:
-   On Linux (Zaurus):
-     I/O device: /dev/ircomm
-     Connection: irda
-     Model: <leave empty>
-   
-   On Windows:
-     I/O device: <ignored - i.e. leave empty>
-     Connection: irda
-     Model: <leave empty>
-
-   Here is the overview from the Gammu documentation, 
-   how to specify the connection settings  for
-     I/O device: 
-     Connection: 
-     Model:
- 
-   Note: The documentation uses the term "port", 
-         where we use the term "I/O device".
-   Note: You do not have to create/change the gammurc configuration file.
-         That will do KO/Pi for you.  
-   Note: For a known model, leave "Model:" always empty, 
-         such that Gammu can auto detect the model.
-
-# This is a sample ~/.gammurc file.
-# In Unix/Linux  copy it into your home directory and name it .gammurc
-#                or into /etc and name it gammurc
-# In Win32       copy it into directory with Gammu.exe and name gammurc
-# More about parameters later
-# -----------------------------------------------------------------------------
-
-[gammu]
-
-port = com8:
-#model = 6110
-connection = fbusblue
-#synchronizetime = yes
-#logfile = gammulog
-#logformat = textall
-#use_locking = yes
-#gammuloc = locfile
-#startinfo = yes
-#gammucoding = utf8
-
-[gammu1]
-
-port = com8:
-#model = 6110
-connection = fbusblue
-#synchronizetime = yes
-#logfile = gammulog
-#logformat = textall
-#use_locking = yes
-#gammuloc = locfile
-#startinfo = yes
-#gammucoding = utf8
-
-# -----------------------------------------------------------------------------
-# Now info about "Connection" parameter and connected with it port type
-# (more about port types later)
-# -----------------------------------------------------------------------------
-# "Connection" parameter | Port type | More details
-# -----------------------|-----------|-----------------------------------------
-# "fbus"                 | serial    | Nokia FBUS2
-# "fbusirda"/"infrared"  | serial    | Nokia FBUS2 over direct infrared device
-# "fbusdlr3"/"dlr3"      | serial    | Nokia FBUS2 with DLR3 cable
-# "fbusdku5"             | dku5      | Nokia FBUS2 with DKU5 cable. WIN32 ONLY
-# "fbuspl2303"           | usb       | Nokia FBUS2 with USB cable based on
-#                        |           | PL2303 chip.
-# "fbusblue"             | serial    | Nokia FBUS2 over Bluetooth serial device
-# "phonetblue"           | serial    | Nokia PHONET FBUS over Bluetooth serial
-#                        |           | device
-# "mrouterblue"          | serial    |
-# "mbus"                 | serial    | Nokia MBUS2
-# "at19200"/"at115200"/..| serial    | AT commands.8 bits, None parity, 1 stop
-#                        |           | bit, no flow control
-# -----------------------|-----------|-----------------------------------------
-# "irdaphonet"/"irda"    | irda      | Nokia PHONET FBUS over socket infrared
-# "irdaat"               | irda      | AT commands with socket infrared
-# "irdaobex"             | irda      | OBEX over socket infrared. MODEL "obex"
-# -----------------------|-----------|-----------------------------------------
-# "bluephonet"           | BT        | Nokia PHONET FBUS with Bluetooth stack
-# "bluefbus"/"dlr3blue"  | BT        | Nokia FBUS2 with Bluetooth stack
-# "blueat"/"atblue"      | BT        | AT commands with Bluetooth stack
-# "blueobex"             | BT        | OBEX with Bluetooth. MODEL "obex"
-#
-# Now more about port types and connected with it "Port" parameter
-# -----------------------------------------------------------------------------
-# Port type | "Port" parameter in Windows/DOS | "Port" parameter in Linux/Unix
-# ----------|---------------------------------|--------------------------------
-# serial    | "com*:"                         | "/dev/ttyS*"
-#           | (example "com1:")               | (example "/dev/ttyS1")
-#           |                                 | or "/dev/tts/**" (with DevFS)
-# ----------|---------------------------------|--------------------------------
-# irda      | ignored (can be empty)          | "/dev/ircomm*"
-# ----------|---------------------------------|--------------------------------
-# BT        |                 Bluetooth device address
-#           |                 (example "")
-# ----------|---------------------------------|--------------------------------
-# dku5      | ignored (can be empty)          | connection with it not possible
-# ----------|---------------------------------|--------------------------------
-# usb       | connection with it not possible | "/dev/ttyUSB*"
-#
-# Other config parameters
-# -----------------------------------------------------------------------------
-# Parameter name  | Description
-# ----------------|------------------------------------------------------------
-# Model           | use only, when Gammu doesn't recognize your phone model.
-#                 | Put it here. Example values: "6110", "6150", "6210", "8210"
-# SynchronizeTime | if you want to set time from computer to phone during
-#                 | starting connection. Do not rather use this option when
-#                 | when to reset phone during connection (in some phones need
-#                 | to set time again after restart)
-# GammuLoc        | name of localisation file
-# StartInfo       | this option allow to set, that you want (setting "yes")
-#                 | to see message on the phone screen or phone should enable
-#                 | light for a moment during starting connection. Phone
-#                 | WON'T beep during starting connection with this option.
-# GammuCoding     | forces using specified codepage (in win32 - for example
-#                 | "1250" will force CP1250) or UTF8 (in Linux - "utf8")
-# ----------------|------------------------------------------------------------
-# Logfile         | Use, when want to have logfile from communication.
-# Logformat       | What debug info and format should be used:
-#                 |   "nothing" - no debug level (default)
-#                 |   "text"    - transmission dump in text format
-#                 |   "textall" - all possible info in text format
-#                 |   "errors"  - errors in text format
-#                 |   "binary"  - transmission dump in binary format
-# ----------------|------------------------------------------------------------
-# Use_Locking     | under Unix/Linux use "yes", if want to lock used device
-#                 | to prevent using it by other applications. In win32 ignored
-
-   
-   
-   
-   
\ No newline at end of file
diff --git a/bin/kdepim/korganizer/kopiWhatsNew.txt b/bin/kdepim/korganizer/kopiWhatsNew.txt
deleted file mode 100644
index 3f95dcf..0000000
--- a/bin/kdepim/korganizer/kopiWhatsNew.txt
+++ b/dev/null
@@ -1,360 +0,0 @@
-Info about the changes in new versions of KO/Pi
-and KDE-Pim/Pi
-
-********** VERSION 1.9.7 ************
-
-KO/Pi - KA/Pi on Windows:
-Now a directory can be defined by the user, where the 
-application/config data should be saved.
-  Define your desired path in the evironment variable
-  MICROKDEHOME
-  before starting KO/Pi or KA/Pi.
-
-An easy Kx/Pi to Kx/Pi syncing is now possible 
-(it is called Pi-Sync) via network.
-Please look at the Sync Howto.
-
-Exporting of calendar data and contacts to mobile phones is now possible.
-The SyncHowto is updated with information howto
-access/sync mobile phones. 
-Please look at the Sync Howto.
-
-Now KO/Pi and KA/Pi on the Zaurus can receive data via infrared directly.
-Please disable Fastload for the original contact/calendar applications
-and close them.
-KO/Pi and KA/Pi must be running in order to receive the data.
-(KO/Pi and KA/Pi are always running if Fastload for them is enabled!)
-
-
-********** VERSION 1.9.6 ************
-
-Changes in the external application communication on the Zaurus 
-in order to use less RAM when the apps are running.
-First syncing of addressbooks (KA/Pi) is possible.
-
-
-********** VERSION 1.9.5a ************
-
-Fixed a bug in KO/Pi in the SharpDTM sync of version 1.9.5.
-Fixed some small bugs.
-KA/Pi shows now the birthday in summary view.
-Now OM/Pi and KA/Pi are using the date format defined in KO/Pi
-for displaying dates.
-
-
-********** VERSION 1.9.5 ************
-
-There is still no Addressbook syncing!
-
-New in 1.9.5:
-
-Many bugfixes.
-Better searching in KA/Pi.
-You can configure in KA/Pi if you want to search only after 
-<return> key pressed.
-
-Better mail downloading in OM/Pi.
-
-First experimental alpha version of sync of KO/Pi with mobile phones.
-See gammu documentation for supported phones.
-You need to install the package kammu_1.9.5_arm.ipk for sync of KO/Pi with mobile phones. kammu_1.9.5_arm.ipk needs libbluetooth and libsdp.
-Quick hint how to use:
-NOTE: MOBILE PHONE SYNC IS EXPERIMENTAL!
-Install kammu_1.9.5_arm.ipk , libbluetooth and libsdp.
-Create syncprofile - mobile device
-Remove entry for model. (Leave empty ).
-Enable infrared on Zaurus and your Phone.
-Sync.
-To get a more detailed log, start kopi from konsole.
-
-********** VERSION 1.9.4 ************
-
-This is the version 1.9.4 of KDE-Pim/Pi for the Zaurus.
-
-WARNING:
-PLEASE BACKUP ALL YOUR DATA!
-We have changed a lot and maybe there are some unknown problems.
-
-SYNC HANDLING HAS CHANGED!
-Such that, if you sync now with an already synded device, you will duplicated entries after the first sync.
-(This change was introduced to make it possible to sync with mobile phones, which will be available later (maybe in 4 weeks).
-
-You need the kmicrokdelibs_1.9.4_arm.ipk as a base for the other programs.
-If you get the error: "Install only possible in main memory", just try it again to install it on SD card. That worked for me. And it was reported that rebooting Qtopia did help in this case as well. 
-
-As programs are available:
-KO/Pi (korganizer ipk) - a calendar program.
-KA/Pi (kaddressbook ipk ) - an addressbook
-OM/Pi (kopiemail ipk ) an email program with pop/smtp and IMAP support.
-
-An alarm notification program ( korganizer-alarm ipk ) for KO/Pi that notifies you about alarms, even if the Zaurus is in suspend mode.
-(If you do not see an icon in the taskbar after installing korganizer-alarm, please restart Qtopia)
-
-All the applications are installed in a "Pim" TAB.
-If this TAB is new on your system, you can get an icon in this TAB by installing pim_TAB_icon_1.9.4_arm.ipk
-
-All the application are integrated.
-Such that you can choose in KO/Pi the attendees of a  meeting from the addresses in KA/Pi. When you click in KA/Pi on the email address, OM/Pi is started to write the mail.
-
-HINT:
-If you install KPhone/Pi 0.9.7, it will be called, if you click in KA/Pi on a phone number.
-
-What's new?
-
-SYNC HANDLING HAS CHANGED!
-Such that, if you sync now with an already synded device, you will duplicated entries after the first sync.
-(This change was introduced to make it possible to sync with mobile phones, which will be available later (maybe in 4 weeks).
-
-New in OM/Pi:
-When copying(i.e. downloading mails) , you can specify, that only mails of a given size should be downloaded. Added mail copy possibility for selected mails.
-
-New in KO/Pi:
-French is now available for KO/Pi.
-Choose menu:Actions - Configure:TAB locale
-Syncing has changed.
-Phone sync available soon.
-Not much changes, I cannot remember them ...
-
-New in KA/Pi:
-Beaming possible.
-Sharp DTM readonly access possible( create a new DTM resource );
-Better searching possible.
-Search is performed only after pressing the return key.
-Use wildcard * to specify parts of a name.
-
-Better name/email selection dialog (called from KO/Pi or OM/Pi). In this dialog, now searching is possible. Like in KA/Pi, use return key and wildcard * .
-
-A big improvement is the new management of the contact access.
-In version 1.9.3, every application was using their own addressbook access data.
-That means, the addressbook was loaded up to three times in the memory, when accessed by  KA/Pi, KO/Pi and OM/Pi.
-That was wasting of memory, if you had several hundreds of contacts.
-
-Now only KA/Pi accesses the addressbook.
-If KO/Pi or OM/Pi want to get some name/email data, they request KA/Pi to open the  name/email selection dialog and send it back to them.
-If you click on an attendee in a meeting, its contact data is displayed in KA/Pi directly.
-That means, if KO/Pi or OM/Pi want to access contact data, KA/Pi is started first.
-
-New in the KO/Pi alarm applet:
-Configure your own timer popup menu!
-(Text and minutes for timer countdown)
-Just edit the file
-(yourhomedir)/.kopialarmtimerrc
-and start/stop a timer to get a new menu with the data of this file.
-
-********** VERSION 1.9.3 ************
-1)
-Now KO/Pi on Windows imports directly the calendar data of
-an installed Outlook. Should work with OL version >= 2000.
- 
-********** VERSION 1.9.2 ************
-1)
-KDE-Pim/Pi has got a new member:
-KmicroMail (KM/Pi) is a mail program, 
-which can handle IMAP and POP mail access.
-It is based on Opie-Mail v3.
-All dependencies to the Opie libraries ar removed, 
-such that no additional Opie lib is needed.
-It is already integrated in KO/Pi and KA/Pi.
-It it now available for the Zaurus,probably it 
-will be available for other platforms later.
-Hint:
-Create your own contact (name + email)
-in KA/Pi, select this contact and choose menu:
-Settings - Set Who Am I.
-Now the settings of this contact are used as 
-the sender data in KM/Pi.
-2)
-KDE-Pim/Pi is split up in five different
-packages now precompiled for Sharp Zaurus:
---kmicrokdelibs_1.9.2_arm.ipk
-The libs are needed for any 
-of the following programs:
---kaddressbook_1.9.2_arm.ipk
---kmicromail_1.9.2_arm.ipk
---korganizer_1.9.2_arm.ipk
-Independ from that, there is the alarm applet
-available for KO/Pi, which also offers
-quick access for a new mail or
-showing the addressbook.:
---korganizer-alarm_1.9.2_arm.ipk
-Independend means, that the alarm applet
-does not need any of the libs or programs above to run.
-But it would be quite useless without these programs.
-NOTE:
-If you get a
-"This application depends on other programs"
-during installation of 
---kmicrokdelibs_1.9.2_arm.ipk
-you probably do not have to care about that.
-kmicrokdelibs_1.9.2 will come with some
-resource plugins, which needs additional libraries.
-(E.g. libopie1, if you want to use the 
-opie resource connector in KA/Pi).
-If you do not have this libraries installed,
-you simply cannot use the resource.
-To make it clear:
-If the libraries are missing, the applications
-using kmicrokdelibs will start, 
-because the resources are plugins.
-3)
-KO/Pi and friends are now installable on SD-Card!
-It is recommended to install all libs and apps
-on the SD card or all in the internal storage.
-There may be problems, if this is mixed.
-4)
-Fixed two bugs in the alarm notification on Windows.
-5)
-Great improvement!
-KO/Pi uses now the latest version of libical.
-Libical is the library which actually reads 
-the calendar files and extract the data from it.
-With the old version, there were problems
-(crashes or program hangs) when licical did read
-files, which were not stored from KO/Pi.
-I do not know, if the new libical works perfect,
-but actually it works much better than
-the old version.
-There are no problems with compatibility with 
-old calendar files of KO/Pi, of course!
-6)
-New in KA/Pi:
-Opie addressbook resource connector available!
-You will need libopie1 and the opie addressbook,
-of course.
-With the Opie addressbook resource connector,
-you can access the Opie addressbook readonly in KA/Pi.
-If you want to edit or import the data into KA/Pi,
-do this:
-a) Create an Opie resource.
-   (Menu: Settings-Configure Resources).
-After configuration and restarting KA/Pi you should see
-the Opie contacts in KA/Pi.
-b) Select some or all Opie contacts.
-(NOTE: +++++
-To know exactly, what contacts are Opie contacts, 
-do this: Choose menu: 
-View-Modify View - TAB Fields.
-Select in the above list "Resource" and click
-down arrow to add it to the "Selected fields".
-Click OK.
-Now you have a new column "Resource" in your list,
-where you can see, what an Opie resource is.
-++++ NOTE end.)
-Ok, we do have now some Opie contacts seleted.
-(Use SHIFT or CTRL key in order to multiple select).
-c) Choose menu: Edit-Copy.
-d) Choose menu: Edit-Paste.
-e) Select the resource, you want to add the contacts to.
-Congrats! Now you have read/write access to the copied 
-opie contacts as "real" KA/Pi contacts.
-
-
-********** VERSION 1.9.1 ************
-1)
-       +++ IMPORTANT 1 +++
-
-The storing place of the default calendar 
-file has changed!
-The default calendar file was
-Applications/korganizer/mycalendar.ics 
-on Zaurus and 
-(yourHomeDir)/korganizer/mycalendar.ics 
-on Windows/Linux desktop. Now it is
-(yourHomeDir)/kdepim/korganizer/mycalendar.ics
-on Zaurus, Windows and Linux.
-To load the old file, choose menu
-File-Load calendar backup.
-(It should be loaded automatically
-at startup with a warning message displayed).
-The place of the configuration file has changed too.
-If you want to use your old KO/Pi config,
-copy it to 
-(yourHomeDir)/kdepim/config/korganizerrc
-Please read VERSION 1.9.0 - topic 3) as well!
-
-       +++ IMPORTANT 2 +++
-
-Because of the new paths, you will need
-a new version of the KO/Pi alarm applet
-for Zaurus.
-Use version >= 1.9.1
-
-2)
-Now the QWhat'sThis Icon works for items
-in the month view as well.
-(See VERSION 1.7.8 Topic 1) ).
-3)
-You can import birtsdays/anniversaries
-from KA/Pi into KO/Pi.
-Choose menu File-Import birthdays.
-If you import twice, already imported items
-will not be imported again, if they 
-have not been changed in KO/Pi.
-4)
-When syncing with sharp DTM, now a progress 
-is shown, when the data is written back.
-If there is much data in KO/Pi and no data
-in DTM, that can take a long time.
-(But only for the first time ).
-5)
-In the search dialog, you can search 
-now for the name/email of an attendee
-of an event/todo.
-To get more space for displaying
-search results, the buttons
-for "search" and "close" on the 
-bottom are removed in the PDA version. 
-You have to click OK in the top right
-corner to do a search.
-6)
-Now it is possible to disable the displaying
-of todo items in the Allday part of the Agenda.
-Choose Menu Action-Configure,
-TAB Todo View, checkbox
-"Allday Agenda view shows todos"
-7)
-If FastLoad is enabled, now the settings and the 
-calendar data are saved, when KO/Pi is closed.
-(If no Fastload is enabled, KO/Pi saves
-the data as well, of course)
-8)
-The Agenda View has a minimize-splitter now,
-such that the height of the allday part can be
-changed quickly.
-
-********** VERSION 1.9.0 ************
-1)
-KO/Pi is now merged with the new microKDE from KA/Pi.
-KO/Pi accesses now KA/Pi as the addressbook.
-The other ddressbook-plugins are not working any longer.
-(It is planned, that later KA/Pi itself uses these plugins)
-New versions of KO/Pi are only available
-together with KA/Pi as the KDE-Pim/Pi package. 
-2)
-If you click on an attendee of a meeting in the
-event viewer, a detailed summary of the 
-attendee is shown.
-3)
-The place of the configuration file has changed.
-If you want to use your old KO/Pi config, copy
-Applications/korganizer/config_korganizerrc
-to
-Applications/korganizer/config/korganizerrc
-
-********** VERSION 1.7.8 ************
-1)
-Now the QWhat'sThis ist working.
-Enable the QWhat'sThis icon in the toolbar.
-(You have to restart to reload the changed toolbar config).
-Now click on the QWhat'sThis Icon 
-in the top right corner of KO/Pi.
-Then click on an item in the Agenda View:
-You will get a detailed display of the items content.
-2)
-Some other very minor changes.
-But I have forgotten the details ...
-For that reason I start this log here:
-To document my changes, when I am doing it.
-
-********** VERSION 1.7.7 ************
-Stable Version of KO/Pi
\ No newline at end of file