2 files changed, 6 insertions, 1 deletions

diff --git a/bin/kdepim/kaddressbook/germantranslation.txt b/bin/kdepim/kaddressbook/germantranslation.txt
index 5335f47..a3d465f 100644
--- a/bin/kdepim/kaddressbook/germantranslation.txt
+++ b/bin/kdepim/kaddressbook/germantranslation.txt
@@ -557,201 +557,201 @@
 { "Beam v&Card(s)...","Beame v&Card(s)..." },

 { "Set formatted name...","Setze formatierten Namen..." },

 { "Kde Sync HowTo","Kde Sync HowTo" },

 { "Multi Sync HowTo","Multi Sync HowTo" },

 { "&Beam","&Beame" },

 { "Edit Email Addresses","Editiere Email Adressen" },

 { "Email address:","Email Adresse:" },

 { "Change","Ändere" },

 { "Set Standard","Setze Standard" },

 { "New Contact","Neuer Contact" },

 { "Undo %1","Rückgängig %1" },

 { "Redo","Wiederholen" },

 { "Saving ... please wait! ","Am Speichern ... bitte warten! " },

 { "CSV Import Dialog","CSV Import Dialog" },

 { "File to import:","Datei zum Import:" },

 { "Delimiter","Trennzeichen" },

 { "Comma","Komma" },

 { "Semicolon","Semikolon" },

 { "Tabulator","Tabulator" },

 { "Space","Leerzeichen" },

 { "1","1" },

 { """,""" },

 { "'","'" },

 { "Start at line:","Beginne mit Zeile:" },

 { "Textquote:","Textquote:" },

 { "Ignore duplicate delimiters","Ignoriere doppelte Trennzeichen" },

 { "Import KDE 2 Addressbook","Importiere KDE 2 Addressbook" },

 { "Override previously imported entries?","Überschreibe bereits importierte Einträge?" },

 { "Select vCard to Import","Selektiere zu importierende vCard" },

 { "Information","Information" },

 { "contacts successfully imported.","Kontakte erfolgreich importiert." },

 { "Import xml file","Importiere xml Datei" },

 { "Choose contact selection","Wähle Kontakt Auswahl" },

 { "Select the entire address book","Wähle das ganze Adressbuch" },

 { "Only contacts selected in KAddressBook.\nThis option is disabled if no contacts are selected.","Nur in KA/Pi selektierte Kontate.\nDiese Option ist nicht verfügbar\nwhen keine Kontakte selektiert sind." },

 { "Only contacts matching the selected filter.\nThis option is disabled if you haven't defined any filters","Nur Kontakte die auf den Filter zutreffen.\nDiese Option ist nicht verfügbar, wenn keine Filter definiert sind." },

 { "Only contacts who are members of a category that is checked on the list to the left.\nThis option is disabled if you have no categories.","Nur Kontakte die Mitglieder der Kategirien sind,\die links selektiert sind.\nDiese Option ist nicht verfügbar, wenn es keine Kategirien gibt." },

 { "Select a filter to decide which contacts to select.","Selektiere einen Filter um festzulegen welche Kontakte ausgewählt werden sollen." },

 { "Check the categories whose members you want to select.","Setzte die Kategorien, dessen Mitglieder Sie auswählen möchten." },

 { "I/O device: ","I/O device: " },

 { "Connection: ","Connection: " },

 { "Model(opt.): ","Model(opt.): " },

 { "Exporting to phone...","Exportiere aufs Handy..." },

 { "Error exporting to phone","Fehler beim Export aufs Handy" },

 { "contacts successfully exported.","Kontakte erfolgreich exportiert." },

 { "Do you want to remove<br>all existing entries from<br>%1<br>before exporting.?","Wollen Sie<br>alle existieren Einträge von<br>%1<br>vor dem Export entfernen?" },

 { "Set formatted name","Setze formatierten Namen" },

 { "You can set the formatted name\nfor a list of contacts in one go.","Sie können den formatierten Namen für\nein Liste von Kontakten auf einmal setzen." },

 { "Set formatted name to:","Setze formatierten Name auf:" },

 { "Simple: James Bond","Einfach: James Bond" },

 { "Full: Mr. James 007 Bond I","Voll: Mr. James 007 Bond I" },

 { "Reverse: Bond, James","Umgekehrt: Bond, James" },

 { "Organization: MI6","Organisation: MI6" },

 { "Set formatted name to\norganization, if name empty","Setze formatierten Namen auf\nOrganisation, wenn Name leer ist." },

 { "Select contact list","Selektiere Kontakt Liste" },

 { "Changing contact #%1","Ändere Kontakt #%1" },

 { "Refreshing view...","Lade Ansicht neu..." },

 { "Setting formatted name completed!","Setzen vom formatierten Namen beendet!" },

 { "Removing voice...","Entferne voice..." },

 { "Remove voice completed!","Entferne voice beendet!" },

 { "Merge with existing categories?","Zu bestehenden\nKategorien hinzufügen?" },

 { "Setting categories ... please wait!","Setze Kategorien ... bitte warten!" },

 { "Setting categories completed!","Setzen der Kategorien beendet!" },

 { "OK","OK" },

 { "Please wait, processing categories...","Bitte warten, bearbeite Kategorien..." },

 { "Processing contact #%1","Bearbeite Kontakt #%1" },

 { " categories added to list! "," Kategorien zur Liste hinzugefügt! " },

 { "%1: %2","%1: %2" },

 { "Your personal contact is\nnot set! Please select it\nand set it with menu:\nSettings - Set Who Am I\n","Ihr persönlicher Kontakt ist\nnicht gesetzt! Bitte selektieren Sie\nihn und setzen ihn mit Menu:\nKonfiguration - Setze wer bin ich\n" },

 { "<qt>Do you really want to use <b>%1</b> as your new personal contact?</qt>","<qt>Wollen Sie wirklich<br><b>%1</b><br>als persönlichen Kontakt setzent?</qt>" },

 { "Cut","Ausschneiden" },

 { "Paste","Einfügen" },

 { "Delete","Löschen" },

 { "Choose...","Wähle..." },

 { "Add View","Ansicht hinzufügen" },

 { "View name:","Ansicht Name:" },

 { "View Type","Ainsicht Typ" },

 { "Icons represent contacts. Very simple view.","Icons repräsentieren Kontakte. Sehr einfache Ansicht." },

 { "A listing of contacts in a table. Each cell of the table holds a field of the contact.","Eine Kontaktliste in einer Tabelle." },

 { "Rolodex style cards represent contacts.","Rolodex Stil Karten repräsentieren Kontakte." },

 { "Draw &separators","Zeichne &Trennlinie" },

 { "Separator &width:","Trennlinien &Breite:" },

 { "&Padding:","Füllung:" },

 { "Cards","Karten" },

 { "&Margin:","&Rand:" },

 { "Draw &borders","Zeichne Ränder" },

 { "The item margin is the distance (in pixels) between the item edge and the item data. Most noticeably, incrementing the item margin will add space between the focus rectangle and the item data.","The item margin is the distance (in pixels) between the item edge and the item data. Most noticeably, incrementing the item margin will add space between the focus rectangle and the item data." },

 { "The Item Spacing decides the distance (in pixels) between the items and anything else: the view borders, other items or column separators.","The Item Spacing decides the distance (in pixels) between the items and anything else: the view borders, other items or column separators." },

 { "Sets the width of column separators","Sets the width of column separators" },

 { "&Layout","&Layout" },

 { "Show &empty fields","Zeige leere Felder" },

 { "Show field &labels","Zeige Feld Label" },

 { "Be&havior","Ver&halten" },

 { "Header, Border and Separator Color","Kopf, Rand und Trennlinien Farbe" },

 { "<qt>Are you sure that you want to delete the view <b>%1</b>?</qt>","<qt>Sind Sie sicher, dass Sie die Ansicht <b>%1</b> löschen möchten?</qt>" },

 { "Confirm Delete","Bestätige Löschen" },

 { "Edit Address Book Filter","Editiere Adressbuch Filter" },

 { "Category rule","Kategorie Regel" },

 { "Include categories","Inklusive" },

 { "Exclude categories","Exclusive" },

 { "Include contacts, that are:","Schließe folgende Kontakte ein:" },

 { "public","Öffentlich" },

 { "private","Privat" },

 { "confidential","Vertraulich" },

 { "Configure Resources","Konfiguriere Resourcen" },

 { "Resource Configuration","Resource Konfiguration" },

 { "Resources","Resourcen" },

 { "Standard","Standard" },

 { "&Use as Standard","Setze als Standard" },

 { "Select type of the new resource:","Selektiere Typ der neuen Resource:" },

 { "General Settings","Allgemeine Einstellungen" },

 { "Read-only","Nur-Lesen" },

 { "Include in sync","Schließe in Sync mit ein" },

 { "%1 Resource Settings","%1 Resource Einstellungen" },

 { "Format:","Format:" },

 { "Location:","Ort:" },

 { "Full Menu bar (restart)","Volle Menu Leiste (Neustart!)" },

 { "Language","Sprache" },

 { "Time Format","Zeit Format" },

 { "Time Zone","Zeit Zone" },

 { "Data storage path","Daten Speicherpfad" },

 { "Your current storage dir is:\n%1\nYour mail is stored in:\n(storagedir)/apps/kopiemail/localmail","Aktuelles Speicherverzeichnis ist:\n%1\nIhre Mail wird gespeichert in:\n(speicherverz.)/apps/kopiemail/localmail" },

 { "<b>New data storage dir:</b>","<b>Neues Datenspeicherverzeichnis:</b>" },

 { "New dirs are created automatically","Neue Verzeichnisse werden aut. erstellt" },

 { "Save settings","Speichere Einstellungen" },

 { "Save standard","Speichere Standard" },

 { "Save","Speichern" },

 { "<b>New settings are used\nafter a restart</b>","<b>Neue Einstellungen werden nach\neinem Neustart genutzt</b>" },

 { "Settings are stored in\n%1","Einstellungen werden gespeichert in:\n%1" },

 { "Multiple Sync options","Multi Sync Optionen" },

 { "Sync algo options","Sync Ablauf Optionen" },

 { "Apply filter when adding data to local:","Filter für das Hinzufügen von Daten zu Lokal:" },

 { "Incoming calendar filter:","Eingehender Kalender Filter:" },

 { "Incoming addressbook filter:","Eingehender Adressbuch Filter:" },

 { "Write back options","Optionen zum Zurückschreiben" },

 { "Write back (on remote) existing entries only","Schreibe nur existierende (auf Entfernt) Einträge zurück" },

 { "Apply filter when adding data to remote:","Filter für das Hinzufügen von Daten zu Entfernt:" },

 { "Outgoing calendar filter:","Ausgehender Kalender Filter:" },

 { "Outgoing addressbook filter:","Ausgehender Adressbuch Filter:" },

 { "Write back (calendar) entries for time period only","Schreibe nur Kalender Einträge für Zeitspanne zurück" },

 { "Time period","Zeitspanne" },

 { "From ","Von " },

 { " weeks in the past to "," Wochen in der Vergangenheit bis zu " },

 { " weeks in the future "," Wochen in der Zukunft " },

 { "Profile kind specific settings","Profil Art abhängige Einstellungen" },

 { "Local temp file:","Lokale temp Datei:" },

 { "Multiple profiles with same name!\nPlease use unique profile names!","Mehrere Profile mit demselben Namen!\nBitte verschiedene Namen benutzen!" },

 { "Aborted! Nothing synced!","Abgebrochen! Nichts wurde gesynct!" },

 { "You cannot remove your standard resource!\n Please select a new standard resource first.","Standard Resource kann\nnicht entfernt werden!\nBitte eine andere Resource\nals Standard setzen." },

 { "Sorry","Tut mir leid" },

 { "You cannot use a read-only<br> resource as standard!","Man kann nicht eine read-only<br> Resource als Standard setzen!" },

 { "Please restart to get the \nchanged resources (re)loaded!\n","Bitte starten Sie jetzt\ndas Programm neu, um die geänderten\nResourcen neu zu laden!\n" },

 { "The selected file does not\ninclude a valid vCard.\nPlease check the file and try again.\n","Die gewählte Datei enthält\nkeine gültige vCard.\nBitte prüfen Sie die Datei\nund versuchen es erneut.\n" },

 { "Unable to load resource '%1'","Resource kann nicht geladen werden: '%1'" },

 { "Some changes are only\neffective after a restart!\n","Einige Änderungen werden erst\nnach einem Neustart übernommen!\n" },

 { "Syncing aborted. Nothing synced.","Syncing abgebrochen.Nichts wurde gesynct." },

 { "Connected! Sending request for remote file ...","Verbunden! Sende Daten Anfrage..." },

 { "Trying to connect to remote...","Versuche mit Gegenstelle zu verbinden..." },

 { "Connection to remote\nhost timed out!\nDid you forgot to enable\nsyncing on remote host?","Verbindungsversuch wegen\nZeitüberschreitung gescheitert!\nWurde vergessen Pi-Sync auf\nder Gegenstelle anzuschalten?" },

 { "ERROR: Receiving remote file failed.","FEHLER: Empfang der entfernten Daten fehlgeschlagen." },

 { "Error","Fehler" },

 { ""You entered an invalid date!\n Date changed  to current date.","Ungültiges Datum eingegeben.\nSetze heutiges Datum." },

 { "You entered an invalid date!\n Will use current date instead.","Ungültiges Datum eingegeben.\nSetze stattdessen heutiges Datum." },

 { "Warning","Warnung" },

 { "Select week number","Wähle Wochen Nummer" },

 { "Februar","Februar" },

 { "Pi-Sync options for device: ","Pi-Sync Einstellungen für Gerät: " },

 { "Password for remote access:","Passwort für fernen Zugriff:" },

 { "Remote IP address:","Ferne IP Adresse:" },

 { "Remote port number:","Ferne Port Nummer:" },

 { "Remote file saved to temp file.","Ferne Daten in temp Datei gespeichert." },

 { "Remote from: ","Fern von: " },

 { "Local from: ","Lokal von: " },

 { "Synchronization summary:\n\n %d items added to local\n %d items added to remote\n %d items updated on local\n %d items updated on remote\n %d items deleted on local\n %d items deleted on remote\n %d incoming filtered out\n %d outgoing filtered out\n","Synchronisationsübersicht:\n\n %d lokal hinzugefügt\n %d fern hinzugefügt\n %d lokal geändert\n %d fern geändert\n %d lokal gelöscht\n %d fern gelöscht\n %d eingehende ausgefiltert\n %d ausgehende ausgefiltert\n" },

 { "Local calendar changed!\n","Lokaler Kalender geändert!\n" },

 { "Write back","Schreibe zurück" },

 { "Pi-Sync succesful!","Pi-Sync erfolgreich!" },

 { "Received sync request","Sync Anfrage erhalten" },

 { "Synchronizing from remote ...\n\nDo not use this application!\n\nIf syncing fails\nyou can close this dialog.","Ferne Synchronisation ...\n\nBenutze diese Anwendung nicht!\n\nWenn das Syncen fehlschlägt kann\ndieser Dialog geschlossen werden." },

 { "Saving Data to temp file ...","Speichere Daten in temp Datei..." },

 { "Data saved to temp file!","Daten in temp Datei gespeichert!" },

 { "Sending file...","Sende Datei..." },

 { "Waiting for synced file...","Warte auf gesyncte Daten..." },

 { "Receiving synced file...","Gesyncte Daten erhalten..." },

 { "Received %1 bytes","%1 Bytes erhalten" },

 { "Writing file to disk...","Speichere Datei..." },

 { "Pi-Sync successful!","Pi-Sync erfolgreich!" },

 { "Clock skew of\nsyncing devices\nis %1 seconds!","Uhrzeitunterschied der\nsyncenden Geräte\nist %1 Sekunden!" },

 { "Synchronize!","Synchronisiere!" },

 { "High clock skew!","Großer Uhrzeitunterschied!" },

 { "ADJUST\nYOUR\nCLOCKS!","JUSTIERE\nDIE\nUHREN!" },

 { "The clocks of the syncing\ndevices have a difference\nof more than 5 minutes.\nPlease adjust your clocks.\nYou may get wrong syncing results!\nPlease confirm synchronization!","Die Uhren der syncenden Geräte\nhaben einen Unterschied von\nmehr als 5 Minuten. Bitte die\nUhrzeiten anpassen. Sie können\nfalsche Sync-Resultate erhalten!\nBitte das Syncen bestätigen!" },

-{ "","" },

+{ "Change search field enable jump bar","Ändere Suchfeld um Jumpbar anzuzeigen" },

 { "","" },

 { "","" },

 { "","" },

 { "","" },

 { "","" },

 { "","" },

 { "","" },

 { "","" },
\ No newline at end of file
diff --git a/kaddressbook/kabcore.cpp b/kaddressbook/kabcore.cpp
index 3f7a7da..e8f6132 100644
--- a/kaddressbook/kabcore.cpp
+++ b/kaddressbook/kabcore.cpp
@@ -1254,384 +1254,389 @@ void KABCore::newContact()
 
 void KABCore::addEmail( QString aStr )
 {
 #ifndef KAB_EMBEDDED
   QString fullName, email;
 
   KABC::Addressee::parseEmailAddress( aStr, fullName, email );
 
   // Try to lookup the addressee matching the email address
   bool found = false;
   QStringList emailList;
   KABC::AddressBook::Iterator it;
   for ( it = mAddressBook->begin(); !found && (it != mAddressBook->end()); ++it ) {
     emailList = (*it).emails();
     if ( emailList.contains( email ) > 0 ) {
       found = true;
       (*it).setNameFromString( fullName );
       editContact( (*it).uid() );
     }
   }
 
   if ( !found ) {
     KABC::Addressee addr;
     addr.setNameFromString( fullName );
     addr.insertEmail( email, true );
 
     mAddressBook->insertAddressee( addr );
     mViewManager->refreshView( addr.uid() );
     editContact( addr.uid() );
   }
 #else //KAB_EMBEDDED
   qDebug("KABCore::addEmail finsih method");
 #endif //KAB_EMBEDDED
 }
 
 void KABCore::importVCard( const KURL &url, bool showPreview )
 {
   mXXPortManager->importVCard( url, showPreview );
 }
 void KABCore::importFromOL()
 {
 #ifdef _OL_IMPORT_
   KAImportOLdialog* idgl = new KAImportOLdialog( i18n("Import Contacts from OL"),  mAddressBook, this );
   idgl->exec();
   KABC::Addressee::List list = idgl->getAddressList();
   if ( list.count() > 0 ) {
     KABC::Addressee::List listNew;
     KABC::Addressee::List listExisting;
     KABC::Addressee::List::Iterator it;
     KABC::AddressBook::Iterator iter;
     for ( it = list.begin(); it != list.end(); ++it ) {
       if ( mAddressBook->findByUid((*it).uid() ).isEmpty())
         listNew.append( (*it) );
       else
         listExisting.append( (*it) );
     }
     if ( listExisting.count()  > 0 )
       KMessageBox::information( this, i18n("%1 contacts not added to addressbook\nbecause they were already in the addressbook!").arg( listExisting.count() ));
     if ( listNew.count() > 0 ) {
       pasteWithNewUid = false;
       pasteContacts( listNew );
       pasteWithNewUid = true;
     }
   }
   delete idgl;
 #endif
 }
 
 void KABCore::importVCard( const QString &vCard, bool showPreview )
 {
   mXXPortManager->importVCard( vCard, showPreview );
 }
 
 //US added a second method without defaultparameter
 void KABCore::editContact2() {
   editContact( QString::null );
 }
 
 void KABCore::editContact( const QString &uid )
 {
 
   if ( mExtensionManager->isQuickEditVisible() )
     return;
 
   // First, locate the contact entry
   QString localUID = uid;
   if ( localUID.isNull() ) {
     QStringList uidList = mViewManager->selectedUids();
     if ( uidList.count() > 0 )
       localUID = *( uidList.at( 0 ) );
   }
 
   KABC::Addressee addr = mAddressBook->findByUid( localUID );
   if ( !addr.isEmpty() ) {
       mEditorDialog->setAddressee( addr );
       KApplication::execDialog ( mEditorDialog );
   }
 }
 
 /**
   Shows or edits the detail view for the given uid. If the uid is QString::null,
   the method will try to find a selected addressee in the view.
  */
 void KABCore::executeContact( const QString &uid /*US = QString::null*/ )
 {
   if ( mMultipleViewsAtOnce )
   {
     editContact( uid );
   }
   else
   {
     setDetailsVisible( true );
     mActionDetails->setChecked(true);
   }
 
 }
 
 void KABCore::save()
 {
      if (syncManager->blockSave())
         return;
     if ( !mModified )
         return;
 
     syncManager->setBlockSave(true);
    QString text = i18n( "There was an error while attempting to save\n the "
     "address book. Please check that some \nother application is "
     "not using it. " );
    message(i18n("Saving ... please wait! "), false);
    //qApp->processEvents();
 #ifndef KAB_EMBEDDED
   KABC::StdAddressBook *b = dynamic_cast<KABC::StdAddressBook*>( mAddressBook );
   if ( !b || !b->save() ) {
     KMessageBox::error( this, text, i18n( "Unable to Save" ) );
   }
 #else //KAB_EMBEDDED
   KABC::StdAddressBook *b = (KABC::StdAddressBook*)( mAddressBook );
   if ( !b || !b->save() ) {
     QMessageBox::critical( this, i18n( "Unable to Save" ), text,  i18n("Ok"));
   }
 #endif //KAB_EMBEDDED
 
   message(i18n("Addressbook saved!"));
   setModified( false );
   syncManager->setBlockSave(false);
 }
 
 
 void KABCore::undo()
 {
   UndoStack::instance()->undo();
 
   // Refresh the view
   mViewManager->refreshView();
 }
 
 void KABCore::redo()
 {
   RedoStack::instance()->redo();
 
   // Refresh the view
   mViewManager->refreshView();
 }
 void KABCore::setJumpButtonBar( bool visible )
 {
     setJumpButtonBarVisible(visible );
     saveSettings();
 }
 void KABCore::setJumpButtonBarVisible( bool visible )
 {
   if (mMultipleViewsAtOnce)
   {
     if ( visible )
       mJumpButtonBar->show();
     else
       mJumpButtonBar->hide();
   }
   else
   {
         // show the jumpbar only if "the details are hidden" == "viewmanager are shown"
     if (mViewManager->isVisible())
     {
       if ( visible )
         mJumpButtonBar->show();
       else
         mJumpButtonBar->hide();
         }
         else
         {
       mJumpButtonBar->hide();
         }
   }
+  if ( visible ) {
+      if ( mIncSearchWidget->currentItem() == 0 ) {
+          message( i18n("Change search field enable jump bar") );
+      }
+  }
 }
 
 
 void KABCore::setDetailsToState()
 {
     setDetailsVisible(  mActionDetails->isChecked() );
 }
 void KABCore::setDetailsToggle()
 {
     mActionDetails->setChecked( !mActionDetails->isChecked() );
     setDetailsToState();
 }
 
 
 
 void KABCore::setDetailsVisible( bool visible )
 {
   if (visible && mDetails->isHidden())
   {
     KABC::Addressee::List addrList = mViewManager->selectedAddressees();
     if ( addrList.count() > 0 )
       mDetails->setAddressee( addrList[ 0 ] );
   }
 
   // mMultipleViewsAtOnce=false: mDetails is always visible. But we switch between
   // the listview and the detailview. We do that by changing the splitbar size.
   if (mMultipleViewsAtOnce)
   {
     if ( visible )
       mDetails->show();
     else
       mDetails->hide();
   }
   else
   {
     if ( visible ) {
       mViewManager->hide();
       mDetails->show();
       mIncSearchWidget->setFocus();
     }
     else {
       mViewManager->show();
       mDetails->hide();
       mViewManager->setFocusAV();
     }
     setJumpButtonBarVisible( !visible );
   }
 
 }
 
 void KABCore::extensionChanged( int id )
 {
   //change the details view only for non desktop systems
 #ifndef DESKTOP_VERSION
 
   if (id == 0)
   {
     //the user disabled the extension.
 
     if (mMultipleViewsAtOnce)
     { // enable detailsview again
       setDetailsVisible( true );
       mActionDetails->setChecked( true );
     }
     else
     {  //go back to the listview
       setDetailsVisible( false );
       mActionDetails->setChecked( false );
       mActionDetails->setEnabled(true);
         }
 
   }
   else
   {
     //the user enabled the extension.
     setDetailsVisible( false );
     mActionDetails->setChecked( false );
 
     if (!mMultipleViewsAtOnce)
     {
       mActionDetails->setEnabled(false);
         }
 
     mExtensionManager->setSelectionChanged();
 
   }
 
 #endif// DESKTOP_VERSION
 
 }
 
 
 void KABCore::extensionModified( const KABC::Addressee::List &list )
 {
 
   if ( list.count() != 0 ) {
     KABC::Addressee::List::ConstIterator it;
     for ( it = list.begin(); it != list.end(); ++it )
       mAddressBook->insertAddressee( *it );
     if ( list.count() > 1 )
         setModified();
     else
         setModifiedWOrefresh();
   }
   if ( list.count() == 0 )
     mViewManager->refreshView();
   else
      mViewManager->refreshView( list[ 0 ].uid() );
 
 
 
 }
 
 QString KABCore::getNameByPhone( const QString &phone )
 {
 #ifndef KAB_EMBEDDED
   QRegExp r( "[/*/-/ ]" );
   QString localPhone( phone );
 
   bool found = false;
   QString ownerName = "";
   KABC::AddressBook::Iterator iter;
   KABC::PhoneNumber::List::Iterator phoneIter;
   KABC::PhoneNumber::List phoneList;
   for ( iter = mAddressBook->begin(); !found && ( iter != mAddressBook->end() ); ++iter ) {
     phoneList = (*iter).phoneNumbers();
     for ( phoneIter = phoneList.begin(); !found && ( phoneIter != phoneList.end() );
           ++phoneIter) {
       // Get rid of separator chars so just the numbers are compared.
       if ( (*phoneIter).number().replace( r, "" ) == localPhone.replace( r, "" ) ) {
         ownerName = (*iter).formattedName();
         found = true;
       }
     }
   }
 
   return ownerName;
 #else //KAB_EMBEDDED
   qDebug("KABCore::getNameByPhone finsih method");
   return "";
 #endif //KAB_EMBEDDED
 
 }
 
 void KABCore::openConfigDialog()
 {
     KCMultiDialog*  ConfigureDialog = new KCMultiDialog( "PIM", this ,"kabconfigdialog", true );
     KCMKabConfig* kabcfg = new KCMKabConfig( ConfigureDialog->getNewVBoxPage(i18n( "Addressbook")) , "KCMKabConfig" );
     ConfigureDialog->addModule(kabcfg );
     KCMKdePimConfig* kdelibcfg = new KCMKdePimConfig( ConfigureDialog->getNewVBoxPage(i18n( "Global")) , "KCMKdeLibConfig" );
     ConfigureDialog->addModule(kdelibcfg );
 
     connect( ConfigureDialog, SIGNAL( applyClicked() ),
            this, SLOT( configurationChanged() ) );
     connect( ConfigureDialog, SIGNAL( okClicked() ),
              this, SLOT( configurationChanged() ) );
     saveSettings();
 #ifndef DESKTOP_VERSION
     ConfigureDialog->showMaximized();
 #endif
     if ( ConfigureDialog->exec() )
         KMessageBox::information( this,  i18n("Some changes are only\neffective after a restart!\n") );
     delete ConfigureDialog;
 }
 
 void KABCore::openLDAPDialog()
 {
 #ifndef KAB_EMBEDDED
   if ( !mLdapSearchDialog ) {
     mLdapSearchDialog = new LDAPSearchDialog( mAddressBook, this );
     connect( mLdapSearchDialog, SIGNAL( addresseesAdded() ), mViewManager,
             SLOT( refreshView() ) );
     connect( mLdapSearchDialog, SIGNAL( addresseesAdded() ), this,
             SLOT( setModified() ) );
   } else
     mLdapSearchDialog->restoreSettings();
 
   if ( mLdapSearchDialog->isOK() )
     mLdapSearchDialog->exec();
 #else //KAB_EMBEDDED
   qDebug("KABCore::openLDAPDialog() finsih method");
 #endif //KAB_EMBEDDED
 }
 
 void KABCore::print()
 {
 #ifndef KAB_EMBEDDED
   KPrinter printer;
   if ( !printer.setup( this ) )
     return;
 
   KABPrinting::PrintingWizard wizard( &printer, mAddressBook,