15 files changed, 76 insertions, 22 deletions

diff --git a/bin/kdepim/kaddressbook/germantranslation.txt b/bin/kdepim/kaddressbook/germantranslation.txt
index e076e1e..d6bf118 100644
--- a/bin/kdepim/kaddressbook/germantranslation.txt
+++ b/bin/kdepim/kaddressbook/germantranslation.txt
@@ -583,197 +583,199 @@
 { "Import KDE 2 Addressbook","Importiere KDE 2 Addressbook" },

 { "Override previously imported entries?","Überschreibe bereits importierte Einträge?" },

 { "Select vCard to Import","Selektiere zu importierende vCard" },

 { "Information","Information" },

 { "contacts successfully imported.","Kontakte erfolgreich importiert." },

 { "Import xml file","Importiere xml Datei" },

 { "Choose contact selection","Wähle Kontakt Auswahl" },

 { "Select the entire address book","Wähle das ganze Adressbuch" },

 { "Only contacts selected in KAddressBook.\nThis option is disabled if no contacts are selected.","Nur in KA/Pi selektierte Kontate.\nDiese Option ist nicht verfügbar\nwhen keine Kontakte selektiert sind." },

 { "Only contacts matching the selected filter.\nThis option is disabled if you haven't defined any filters","Nur Kontakte die auf den Filter zutreffen.\nDiese Option ist nicht verfügbar, wenn keine Filter definiert sind." },

 { "Only contacts who are members of a category that is checked on the list to the left.\nThis option is disabled if you have no categories.","Nur Kontakte die Mitglieder der Kategirien sind,\die links selektiert sind.\nDiese Option ist nicht verfügbar, wenn es keine Kategirien gibt." },

 { "Select a filter to decide which contacts to select.","Selektiere einen Filter um festzulegen welche Kontakte ausgewählt werden sollen." },

 { "Check the categories whose members you want to select.","Setzte die Kategorien, dessen Mitglieder Sie auswählen möchten." },

 { "I/O device: ","I/O device: " },

 { "Connection: ","Connection: " },

 { "Model(opt.): ","Model(opt.): " },

 { "Exporting to phone...","Exportiere aufs Handy..." },

 { "Error exporting to phone","Fehler beim Export aufs Handy" },

 { "contacts successfully exported.","Kontakte erfolgreich exportiert." },

 { "Do you want to remove<br>all existing entries from<br>%1<br>before exporting.?","Wollen Sie<br>alle existieren Einträge von<br>%1<br>vor dem Export entfernen?" },

 { "Set formatted name","Setze formatierten Namen" },

 { "You can set the formatted name\nfor a list of contacts in one go.","Sie können den formatierten Namen für\nein Liste von Kontakten auf einmal setzen." },

 { "Set formatted name to:","Setze formatierten Name auf:" },

 { "Simple: James Bond","Einfach: James Bond" },

 { "Full: Mr. James 007 Bond I","Voll: Mr. James 007 Bond I" },

 { "Reverse: Bond, James","Umgekehrt: Bond, James" },

 { "Organization: MI6","Organisation: MI6" },

 { "Set formatted name to\norganization, if name empty","Setze formatierten Namen auf\nOrganisation, wenn Name leer ist." },

 { "Select contact list","Selektiere Kontakt Liste" },

 { "Changing contact #%1","Ändere Kontakt #%1" },

 { "Refreshing view...","Lade Ansicht neu..." },

 { "Setting formatted name completed!","Setzen vom formatierten Namen beendet!" },

 { "Removing voice...","Entferne voice..." },

 { "Remove voice completed!","Entferne voice beendet!" },

 { "Merge with existing categories?","Zu bestehenden\nKategorien hinzufügen?" },

 { "Setting categories ... please wait!","Setze Kategorien ... bitte warten!" },

 { "Setting categories completed!","Setzen der Kategorien beendet!" },

 { "OK","OK" },

 { "Please wait, processing categories...","Bitte warten, bearbeite Kategorien..." },

 { "Processing contact #%1","Bearbeite Kontakt #%1" },

 { " categories added to list! "," Kategorien zur Liste hinzugefügt! " },

 { "%1: %2","%1: %2" },

 { "Your personal contact is\nnot set! Please select it\nand set it with menu:\nSettings - Set Who Am I\n","Ihr persönlicher Kontakt ist\nnicht gesetzt! Bitte selektieren Sie\nihn und setzen ihn mit Menu:\nKonfiguration - Setze wer bin ich\n" },

 { "<qt>Do you really want to use <b>%1</b> as your new personal contact?</qt>","<qt>Wollen Sie wirklich<br><b>%1</b><br>als persönlichen Kontakt setzent?</qt>" },

 { "Cut","Ausschneiden" },

 { "Paste","Einfügen" },

 { "Delete","Löschen" },

 { "Choose...","Wähle..." },

 { "Add View","Ansicht hinzufügen" },

 { "View name:","Ansicht Name:" },

 { "View Type","Typ der Ansicht" },

 { "Icons represent contacts. Very simple view.","Icons repräsentieren Kontakte. Sehr einfache Ansicht." },

 { "A listing of contacts in a table. Each cell of the table holds a field of the contact.","Eine Kontaktliste in einer Tabelle." },

 { "Rolodex style cards represent contacts.","Rolodex Stil Karten repräsentieren Kontakte." },

 { "Draw &separators","Zeichne &Trennlinie" },

 { "Separator &width:","Trennlinien &Breite:" },

 { "&Padding:","Füllung:" },

 { "Cards","Karten" },

 { "&Margin:","&Rand:" },

 { "Draw &borders","Zeichne Ränder" },

 { "The item margin is the distance (in pixels) between the item edge and the item data. Most noticeably, incrementing the item margin will add space between the focus rectangle and the item data.","The item margin is the distance (in pixels) between the item edge and the item data. Most noticeably, incrementing the item margin will add space between the focus rectangle and the item data." },

 { "The Item Spacing decides the distance (in pixels) between the items and anything else: the view borders, other items or column separators.","The Item Spacing decides the distance (in pixels) between the items and anything else: the view borders, other items or column separators." },

 { "Sets the width of column separators","Sets the width of column separators" },

 { "&Layout","&Layout" },

 { "Show &empty fields","Zeige leere Felder" },

 { "Show field &labels","Zeige Feld Label" },

 { "Be&havior","Ver&halten" },

 { "Header, Border and Separator Color","Kopf, Rand und Trennlinien Farbe" },

 { "<qt>Are you sure that you want to delete the view <b>%1</b>?</qt>","<qt>Sind Sie sicher, dass Sie die Ansicht <b>%1</b> löschen möchten?</qt>" },

 { "Confirm Delete","Bestätige Löschen" },

 { "Edit Address Book Filter","Editiere Adressbuch Filter" },

 { "Category rule","Kategorie Regel" },

 { "Include categories","Inklusive" },

 { "Exclude categories","Exclusive" },

 { "Include contacts, that are:","Schließe folgende Kontakte ein:" },

 { "public","Öffentlich" },

 { "private","Privat" },

 { "confidential","Vertraulich" },

 { "Configure Resources","Konfiguriere Resourcen" },

 { "Resource Configuration","Resource Konfiguration" },

 { "Resources","Resourcen" },

 { "Standard","Standard" },

 { "&Use as Standard","Setze als Standard" },

 { "Select type of the new resource:","Selektiere Typ der neuen Resource:" },

 { "General Settings","Allgemeine Einstellungen" },

 { "Read-only","Nur-Lesen" },

 { "Include in sync","Schließe in Sync mit ein" },

 { "%1 Resource Settings","%1 Resource Einstellungen" },

 { "Format:","Format:" },

 { "Location:","Ort:" },

 { "Full Menu bar (restart)","Volle Menu Leiste (Neustart!)" },

 { "Language","Sprache" },

 { "Time Format","Zeit Format" },

 { "Time Zone","Zeit Zone" },

 { "Data storage path","Daten Speicherpfad" },

 { "Your current storage dir is:\n%1\nYour mail is stored in:\n(storagedir)/apps/kopiemail/localmail","Aktuelles Speicherverzeichnis ist:\n%1\nIhre Mail wird gespeichert in:\n(speicherverz.)/apps/kopiemail/localmail" },

 { "<b>New data storage dir:</b>","<b>Neues Datenspeicherverzeichnis:</b>" },

 { "New dirs are created automatically","Neue Verzeichnisse werden aut. erstellt" },

 { "Save settings","Speichere Einstellungen" },

 { "Save standard","Speichere Standard" },

 { "Save","Speichern" },

 { "<b>New settings are used\nafter a restart</b>","<b>Neue Einstellungen werden nach\neinem Neustart genutzt</b>" },

 { "Settings are stored in\n%1","Einstellungen werden gespeichert in:\n%1" },

 { "Multiple Sync options","Multi Sync Optionen" },

 { "Sync algo options","Sync Ablauf Optionen" },

 { "Apply filter when adding data to local:","Filter für das Hinzufügen von Daten zu Lokal:" },

 { "Incoming calendar filter:","Eingehender Kalender Filter:" },

 { "Incoming addressbook filter:","Eingehender Adressbuch Filter:" },

 { "Write back options","Optionen zum Zurückschreiben" },

 { "Write back (on remote) existing entries only","Schreibe nur existierende (auf Entfernt) Einträge zurück" },

 { "Apply filter when adding data to remote:","Filter für das Hinzufügen von Daten zu Entfernt:" },

 { "Outgoing calendar filter:","Ausgehender Kalender Filter:" },

 { "Outgoing addressbook filter:","Ausgehender Adressbuch Filter:" },

 { "Write back (calendar) entries for time period only","Schreibe nur Kalender Einträge für Zeitspanne zurück" },

 { "Time period","Zeitspanne" },

 { "From ","Von " },

 { " weeks in the past to "," Wochen in der Vergangenheit bis zu " },

 { " weeks in the future "," Wochen in der Zukunft " },

 { "Profile kind specific settings","Profil Art abhängige Einstellungen" },

 { "Local temp file:","Lokale temp Datei:" },

 { "Multiple profiles with same name!\nPlease use unique profile names!","Mehrere Profile mit demselben Namen!\nBitte verschiedene Namen benutzen!" },

 { "Aborted! Nothing synced!","Abgebrochen! Nichts wurde gesynct!" },

 { "You cannot remove your standard resource!\n Please select a new standard resource first.","Standard Resource kann\nnicht entfernt werden!\nBitte eine andere Resource\nals Standard setzen." },

 { "Sorry","Tut mir leid" },

 { "You cannot use a read-only<br> resource as standard!","Man kann nicht eine read-only<br> Resource als Standard setzen!" },

 { "Please restart to get the \nchanged resources (re)loaded!\n","Bitte starten Sie jetzt\ndas Programm neu, um die geänderten\nResourcen neu zu laden!\n" },

 { "The selected file does not\ninclude a valid vCard.\nPlease check the file and try again.\n","Die gewählte Datei enthält\nkeine gültige vCard.\nBitte prüfen Sie die Datei\nund versuchen es erneut.\n" },

 { "Unable to load resource '%1'","Resource kann nicht geladen werden: '%1'" },

 { "Some changes are only\neffective after a restart!\n","Einige Änderungen werden erst\nnach einem Neustart übernommen!\n" },

 { "Syncing aborted. Nothing synced.","Syncing abgebrochen.Nichts wurde gesynct." },

 { "Connected! Sending request for remote file ...","Verbunden! Sende Daten Anfrage..." },

 { "Trying to connect to remote...","Versuche mit Gegenstelle zu verbinden..." },

 { "Connection to remote\nhost timed out!\nDid you forgot to enable\nsyncing on remote host?","Verbindungsversuch wegen\nZeitüberschreitung gescheitert!\nWurde vergessen Pi-Sync auf\nder Gegenstelle anzuschalten?" },

 { "ERROR: Receiving remote file failed.","FEHLER: Empfang der entfernten Daten fehlgeschlagen." },

 { "Error","Fehler" },

 { ""You entered an invalid date!\n Date changed  to current date.","Ungültiges Datum eingegeben.\nSetze heutiges Datum." },

 { "You entered an invalid date!\n Will use current date instead.","Ungültiges Datum eingegeben.\nSetze stattdessen heutiges Datum." },

 { "Warning","Warnung" },

 { "Select week number","Wähle Wochen Nummer" },

 { "Februar","Februar" },

 { "Pi-Sync options for device: ","Pi-Sync Einstellungen für Gerät: " },

 { "Password for remote access:","Passwort für fernen Zugriff:" },

 { "Remote IP address:","Ferne IP Adresse:" },

 { "Remote port number:","Ferne Port Nummer:" },

 { "Remote file saved to temp file.","Ferne Daten in temp Datei gespeichert." },

 { "Remote from: ","Fern von: " },

 { "Local from: ","Lokal von: " },

 { "Synchronization summary:\n\n %d items added to local\n %d items added to remote\n %d items updated on local\n %d items updated on remote\n %d items deleted on local\n %d items deleted on remote\n %d incoming filtered out\n %d outgoing filtered out\n","Synchronisationsübersicht:\n\n %d lokal hinzugefügt\n %d fern hinzugefügt\n %d lokal geändert\n %d fern geändert\n %d lokal gelöscht\n %d fern gelöscht\n %d eingehende ausgefiltert\n %d ausgehende ausgefiltert\n" },

 { "Local calendar changed!\n","Lokaler Kalender geändert!\n" },

 { "Write back","Schreibe zurück" },

 { "Pi-Sync succesful!","Pi-Sync erfolgreich!" },

 { "Received sync request","Sync Anfrage erhalten" },

 { "Synchronizing from remote ...\n\nDo not use this application!\n\nIf syncing fails\nyou can close this dialog.","Ferne Synchronisation ...\n\nBenutze diese Anwendung nicht!\n\nWenn das Syncen fehlschlägt kann\ndieser Dialog geschlossen werden." },

 { "Saving Data to temp file ...","Speichere Daten in temp Datei..." },

 { "Data saved to temp file!","Daten in temp Datei gespeichert!" },

 { "Sending file...","Sende Datei..." },

 { "Waiting for synced file...","Warte auf gesyncte Daten..." },

 { "Receiving synced file...","Gesyncte Daten erhalten..." },

 { "Received %1 bytes","%1 Bytes erhalten" },

 { "Writing file to disk...","Speichere Datei..." },

 { "Pi-Sync successful!","Pi-Sync erfolgreich!" },

 { "Clock skew of\nsyncing devices\nis %1 seconds!","Uhrzeitunterschied der\nsyncenden Geräte\nist %1 Sekunden!" },

 { "Synchronize!","Synchronisiere!" },

 { "High clock skew!","Großer Uhrzeitunterschied!" },

 { "ADJUST\nYOUR\nCLOCKS!","JUSTIERE\nDIE\nUHREN!" },

 { "The clocks of the syncing\ndevices have a difference\nof more than 5 minutes.\nPlease adjust your clocks.\nYou may get wrong syncing results!\nPlease confirm synchronization!","Die Uhren der syncenden Geräte\nhaben einen Unterschied von\nmehr als 5 Minuten. Bitte die\nUhrzeiten anpassen. Sie können\nfalsche Sync-Resultate erhalten!\nBitte das Syncen bestätigen!" },

 { "Change search field enable jump bar","Ändere Suchfeld um Jumpbar anzuzeigen" },

 { "Search with '*' prefix (wildcard)","Suche mit '*' Prefix (Wildcard)" },

 { "Shrink searchfield in portrait view","Verkleinere Suchfeld im Portraitmodus" },

 { "Edit new contact","Bearbeite neuen Kontakt" },

 { "Edit ","Bearbeite " },

 { "No contact changed!","Kein Kontakt verändert" },

 { "%1 contacts changed!","%1 Kontakte geändert!" },

 { "Mobile (home)","Handy (Arbeit)" },

 { "Mobile (work)","Handy (Privat)" },

 { "Def.Formatted Name","Def. Format. Name" },

 { "Colors","Farben" },

 { "Alternating background of list views","Abwechselnder Hintergrund für Listen" },

 { "Backup enabled","Backup angeschaltet" },

 { "Use standard backup dir","Standard Backupverzeichnis" },

 { "Number of Backups:","Anzahl der Backups" },

 { "Make backup every ","Mache ein Backup alle " },

 { " days"," Tage" },

 { "Creating backup ... please wait ...","Erzeuge Backup ... bitte warten ..." },

 { "Backup Failed!","Backup Problem!" },

 { "Try again now","Versuche jetzt nochmal" },

 { "Try again later","Versuche später nochmal" },

 { "Try again tomorrow","Versuche morgen nochmal" },

 { "Disable backup","Schalte Backup ab" },

 { "<b>Backup directory does not exist: </b>","<b>Backup Verzeichnis existiert nicht: </b>" },

 { "<b>The backup copy command failed!</b>","<b>Das Backup Kopierkommando is fehlgeschlagen!</b>" },

 { "Choose action","Wähle Aktion" }, 

+{ "&Configure KA/Pi...","Konfiguriere KA/Pi..." },

+{ "Global Settings...","Globale Einstellungen..." },

 { "","" },

 { "","" },

 { "","" },

 { "","" },

 { "","" },
\ No newline at end of file
diff --git a/bin/kdepim/kopiemail/germantranslation.txt b/bin/kdepim/kopiemail/germantranslation.txt
index 75fdd11..14e5c0b 100644
--- a/bin/kdepim/kopiemail/germantranslation.txt
+++ b/bin/kdepim/kopiemail/germantranslation.txt
@@ -86,195 +86,197 @@
 { "Used %1 Client","Benutzter %1 Client" },
 { "No email client installed","Kein Email Klient installiert" },
 { "Userdefined email client","Benutzerdef. Email Klient" },
 { "OM/Pi email client","OM/Pi Email Klient" },
 { "Delete","Löschen" },
 { "New","Neu" },
 { "Edit","Bearbeite" },
 { "Close","Schließen" },
 { "Size","Größe" },
 { "Date","Datum" },
 { "Please set at","Bitte einstellen in" },
 { "Settings@General TAB","Einstellungen@Allgemein TAB" },
 { "KOpieMail/Pi","KOpieMail/Pi" },
 { "Mail","Mail" },
 { "Settings","Konfig" },
 { "Get all new mails","Hole alle neuen Mails" },
 { "Get new messages","Hole neue mails" },
 { "Compose new mail","Schreibe neue Mail" },
 { "Send queued mails","Sende gespeicherte Mails" },
 { "Show/Hide folders","Zeige Verzeichnisse" },
 { "Delete Mail","Lösche Mail" },
 { "Edit settings","Ändere Einstellungen" },
 { "Configure accounts","Konfiguriere Zugänge" },
 { "Mailbox","Mailbox" },
 { "Subject","Betreff" },
 { "Sender","Sender" },
 { "Size","Größe" },
 { "Date","Datum" },
 { "Close","Schliessen" },
 { "Help","Hilfe" },
 { "About","Über" },
 { "Licence","Lizenz" },
 { "LibEtPan Licence","LibEtPan Lizenz" },
 { "Settings - some need a restart (nr)","Einstellungen - manche benötigen einen Neustart (nr)" },
 { "HINT: Separate multiple\neMail addresses by ";"","Hinweis:Trenne mehrere\nAddressen mit einem ";"" },
 { "Ignore above settings and\nuse KA/Pi "Who am I" instead!","Ignoriere obige Einstellungen und\nbenutze KA/Pi "Wer bin ich"\nstattdessen!" },
 { "View mail as html","Zeige Mails als html" },
 { "Send mails later","Sende Mails später" },
 { "Application(nr)","Applikation(nr)" },
 { "OK","OK" },
 { "Compose mail:","Verfasse Mail:" },
 { "Dear Mr.","Hallo Herr" },
 { "Read mail:","Lese Mail:" },
 { "Hello","Hallo" },
 { "Configure Accounts","Konfigure Zugänge" },
 { "Name of the Account","Name des Zugangs" },
 { "News","News" },
 { "Account","Zugang" },
 { "Type","Typ" },
 { "<p>Please select an account.</p>","<p>Bitte wähle einen Zugang.</p>" },
 { "Error","Fehler" },
 { "Configure NNTP","Konfiguriere News" },
 { "Port","Port" },
 { "Server","Server" },
 { "Use SSL","Benutze SSL" },
 { "User","Benutzer" },
 { "Password","Passwort" },
 { "Use Login","Benutze Login" },
 { "Newsgroup","Newsgroup" },
 { "Get newsgroup list from server","Hole Newsgroup Liste vom Server" },
 { "Filter:","Filter:" },
 { "Show subscribed","Zeige abbonnierte" },
 { "Groups","NewsGroups" },
 { "Configure IMAP","Konfiguriere IMAP" },
 { "Use secure sockets:","Benutze sichere Verbindung:" },
 { "ssh $SERVER exec","ssh $SERVER exec" },
 { "Prefix","Prefix" },
 { "Local storage folder:","Lokales Verzeichnis:" },
 { "Get only messages smaller","Hole nur Nachrichten kleiner" },
 { "kB","kB" },
 { "Leave Messages on Server","Belasse Nachrichten auf dem Server" },
 { "Configure POP3","Konfiguriere POP3" },
 { "ssh $SERVER exec imapd","ssh $SERVER exec imapd" },
 { "Configure SMTP","Konfiguriere SMTP" },
 { "Name of the SMTP Server","Name des SMTP Servers" },
 { "Port of the SMTP Server","Port des SMTP Servers" },
 { "Fetching folder list","Hole Verzeichnis Liste" },
 { "Fetch ","Hole " },
 { "Fetching header list","Hole Titel Liste" },
 { "Mailbox has %1 mails","Mailbox hat %1 Mails" },
 { "Read this mail","Lies diese Mail" },
 { "Move/Copy this mail","Verschiebe/kopiere diese Mail" },
 { "Delete this mail","Lösche diese Mail" },
 { "Move/Copy all selected mail","Verschiebe/kopiere selektierte Mails" },
 { "Delete all selected mails","Lösche alle selektierten Mails" },
 { "Clear selection","Selektion aufheben" },
 { "Reply","Antworten" },
 { "Forward","Weiterleiten" },
 { "Attachments","Anhang" },
 { "Show Html","Zeige in html" },
 { "Description","Beschreibung" },
 { "Filename","Dateiname" },
 { "E-Mail by %1","E-Mail von %1" },
 { "Cc","Kopie" },
 { "To","An" },
 { "From","Von" },
 { "<p>Do you really want to delete this mail? <br><br>","<p>Wollen Sie diese Mail wirklich löschen? <br><br>" },
 { "Mailbox has %1 mail(s)","Mailbox hat %1 Mail(s)" },
 { "Move/Copie all mails","Verschiebe/kopiere alle Mails" },
 { "Delete all mails","Lösche alle Mails" },
 { "Create new subfolder","Neues Unterverzeichnis" },
 { "Delete folder","Lösche Verzeichnis" },
 { "Refresh folder list","Aktualisiere Liste" },
 { "Create new folder","Neues Verzeichnis" },
 { "Disconnect","Diskonnect" },
 { "Set offline","Gehe offline" },
 { "Select target box","Wähle Ziel Box" },
 { "<b>Store mail(s) to</b>","<b>Speichere Mail(s) nach</b>" },
 { "Folder:","Verzeichnis:" },
 { "Account:","Zugang:" },
 { "Prefix will prepend, do not enter","Pfad-Prefix wird vorangestellt" },
 { "Move mail(s)","Verschiebe Mail(s)" },
 { "only mails smaller","nur Mails kleiner" },
 { " kB"," kB" },
 { " message %1 of %2"," Nachricht %1 von %2" },
 { "Copying...","Am Kopieren..." },
 { "Copy message %1 of %2","Kopiere Nachricht %1 von %2" },
 { "Do you really want to delete\nall selected mails?","Wollen Sie wirklich alle\nselektierten Mails Löschen?" },
 { "Delete All Mails","Lösche alle Mails" },
 { "Deleting ...","Am Löschen..." },
 { "Delete message %1 of %2","Lösche Nachricht %1 von %2" },
 { "Compose Message","Verfasse Nachricht" },
 { "Reply-To","Antwort-An" },
 { "BCC","BCC" },
 { "Signature","Signatur" },
 { "CC","Kopie" },
 { "Options","Optionen" },
 { "Delete File","Lösche Datei" },
 { "Add File","Füge Datei hinzu" },
 { "Attachment","Anhang" },
 { "send later","sende später" },
 { "use:","via:" },
 { "Save","Speichern" },
 { "Name","Name" },
 { "No Receiver spezified","Kein Empfänger angegeben" },
 { "Sending mail","Sende Mail" },
 { "No","Nein" },
 { "Yes","Ja" },
 { "Store message into drafts?\n","Speichere Nachricht in Entwürfe?\n" },
 { "Store message?","Nachricht speichern?" },
 { "Select Type","Selektiere Typ" },
 { "Select Account Type","Wähle Art des Zugangs" },
 { "IMAP","IMAP (online lesen)" },
 { "POP3","POP3 (holen)" },
 { "SMTP","SMTP (senden)" },
 { "<p>Do you really want to delete the selected Account?</p>","<p>Möchten Sie wirklich den ausgewählten Account löschen?</p>" },
 { "Question","Eine Frage..." },
 { "Send this message?","Nachricht wirklich senden?" },
 { "Stop editing message","Stop editing message" },
 { "Sending mail %1 of %2","Sende Mail %1 von %2" },
 { "%1 of %2 bytes send","%1 von %2 Bytes gesendet" },
 { "Refresh header list","Aktualisiere Titel Liste" },
 { "Define a smtp\n account first!\n","Bitte zuerst einen\nSMTP Account anlegen!\n" },
 { "Mail queue flushed","Gespeicherte Mails gesendet!" },
 { "Please create an\nSMTP account first.\nThe SMTP is needed\nfor sending mail.\n","Bitte legen Sie einen\nSMTP Account an.\nDer SMTP Account wird\nfür das Versenden von\nMails benötigt!" },
 { "Show next mail","Zeige nächste Mail" },
 { "End of List","Ende der Liste" },
 { "Language","Sprache" },
 { "Time Format","Zeit Format" },
 { "%1 groups subscribed","%1 Guppen abboniert" },
 { "Your current storage dir is:\n%1\nYour mail is stored in:\n(storagedir)/apps/kopiemail/localmail","Aktuelles Speicherverzeichnis ist:\n%1\nIhre Mail wird gespeichert in:\n(speicherverz.)/apps/kopiemail/localmail" },
 { "<b>New data storage dir:</b>","<b>Neues Datenspeicherverzeichnis:</b>" },
 { "New dirs are created automatically","Neue Verzeichnisse werden aut. erstellt" },
 { "Save settings","Speichere Einstellungen" },
 { "Save standard","Speichere Standard" },
 { "<b>New settings are used\nafter a restart</b>","<b>Neue Einstellungen werden nach\neinem Neustart genutzt</b>" },
 { "Settings are stored in\n%1","Einstellungen werden gespeichert in:\n%1" },
 { "Data storage path","Daten Speicherpfad" },
 { "userdefined","benutzerdefiniert" },
 { "Reply to this mail","Beantworte diese Mail" },
 { "Su:","Be:" },
 { "Fr:","Vo:" },
 { "To:","An:" },
 { "Download Mail","Mail runterladen" },
 { "View Source","Zeige Source" },
 { "Show "To" field in list view","Zeige "An" Feld in Listenansicht" },
 { "Show info fields at startup","Zeige Info Felder beim Start" },
 { "Show "Subject" info field","Zeige "Betreff" Info Feld" },
 { "Show "From" info field","Zeige "Von" Info Feld" },
 { "Show "To" info field","Zeige "An" Info Feld" },
 { "Mail saved as draft!","Mail als Entwurf gespeichert!" },
 { "Save signature","Speichere Signatur" },
 { "No paths allowed in\nlocal folder settings.\nPlease specify a folder\nname or leave empty\nto create local folder\nwith account name\nautomatically.","Beim lokalen Verzeichnis\nsind keine Pfade erlaubt.\nBitte Verzeichnisnamen\nangeben oder leer lassen\num automatisch ein lokales\nVerzeichnis mit dem\nZugangsnamen anzulegen." },
 { "Do you really want to\nsend all queued mails?","Möchten sie wirklich\nalle Mails im\nOutgoing-Ordner\nsenden?" },
 { "Sending all mails","Senden aller Mails" },
 { "SMTP Account:","SMTP Zugang:" },
 { "Select SMTP Account","Wähle SMTP Zugang" },
 { "Error sending mail:\n%1","Fehler beim Mailversand:\n%1\nHaben Sie vergessen\ndie Post ausreichend\nzu frankieren? ;-)" },
 { "Error sending mail","Fehler beim Mailversand" },
 { "Error sending queued mail.\nBreaking.","Fehler beim Mailversand.\nAbbruch." },
 { "Colors","Farben" },
 { "Alternating background of list views","Abwechselnder Hintergrund für Listen" },
+{ "Configure OM/Pi...","Konfiguriere OM/Pi..." },
+{ "Global Settings...","Globale Einstellungen..." },
 { "","" },
 { "","" },
 { "","" },
\ No newline at end of file
diff --git a/bin/kdepim/pwmanager/germantranslation.txt b/bin/kdepim/pwmanager/germantranslation.txt
index 06fa727..255f2eb 100644
--- a/bin/kdepim/pwmanager/germantranslation.txt
+++ b/bin/kdepim/pwmanager/germantranslation.txt
@@ -178,199 +178,201 @@
 { "<b>New data storage dir:</b>","<b>Neues Datenspeicherverzeichnis:</b>" },

 { "New dirs are created automatically","Neue Verzeichnisse werden aut. erstellt" },

 { "Save settings","Speichere Einstellungen" },

 { "Save standard","Speichere Standard" },

 { "<b>New settings are used\nafter a restart</b>","<b>Neue Einstellungen werden nach\neinem Neustart genutzt</b>" },

 { "Settings are stored in\n%1","Einstellungen werden gespeichert in:\n%1" },

 { "Data storage path","Daten Speicherpfad" },

 { "Used %1 Client","Benutzer %1 Client" },

 { "No email client installed","Keine Email Client installiert" },

 { "Userdefined email client","Benutzerdef. Email Client" },

 { "OM/Pi email client","OM/Pi Email Client" },

 { "URL:","URL:" },

 { "No","Nein" },

 { "Yes","Ja" },

 { "Untitled","Unbenannt" },

 { "&New","&Neu" },

 { "&Open","&Öffne" },

 { "&Close","Schließen" },

 { "Save &as...","Speichere &als..." },

 { "&Text-file...","&Text-Datei..." },

 { "&Gpasman / Kpasman ...","&Gpasman / Kpasman ..." },

 { "&CSV (Comma Separated Value) ...","&CSV (Komma getrennte Werte) ..." },

 { "E&xport","E&xport" },

 { "I&mport","I&mport" },

 { "&Quit","Beenden" },

 { "&Add password","&Passwort hinzufügen" },

 { "&Delete","Lösche" },

 { "Change &Master Password","Ändere &Master Passwort" },

 { "&Manage","Verwalte" },

 { "&Find","&Finde" },

 { "&Lock all entries","Sperre alle Einträge" },

 { "&Deep-lock all entries","Sperre total alle Einträge" },

 { "&Unlock all entries","Entsperre alle Einträge" },

 { "&Configure...","Konfiguriere..." },

 { "&Options","Konfig" },

 { "C&ategories...","K&ategorien..." },

 { "&Sync","&Sync" },

 { "&License","&Lizenz" },

 { "&Faq","&Faq" },

 { "&About PwManager","Über PwManager" },

 { "&Sync HowTo","&Sync HowTo" },

 { "&What's New","Was ist neu?" },

 { "New","Neu" },

 { "Open","Öffnen" },

 { "Save","Speichern" },

 { "Save as","Speichern als" },

 { "Print...","Drucke..." },

 { "Add password","Passwort hinzufügen" },

 { "Edit password","Passwort ändern" },

 { "Delete password","Passwort löschen" },

 { "Find entry","Finde Eintrag" },

 { "Lock all entries","Sperre alle Einträge" },

 { "Deep-Lock all entries","Sperre total alle Einträge" },

 { "Unlock all entries","Entsperre alle Einträge" },

 { "Categories:","Kategorien:" },

 { "&Rename","&Umbenennen" },

 { "Username","Benutzername" },

 { "Password","Passwort" },

 { "Launcher","Launcher" },

 { "copy password to clipboard","Kopiere Passwort ins Clipboard" },

 { "copy username to clipboard","Kopiere Benutzername ins Clipboard" },

 { "copy description to clipboard","Kopiere Beschreibung ins Clipboard" },

 { "copy url to clipboard","Kopiere URL ins Clipboard" },

 { "copy launcher to clipboard","Kopiere Launcher ins Clipboard" },

 { "copy comment to clipboard","Kopiere Kommentare ins Clipboard" },

 { "Execute "Launcher"",""Launcher" ausführen" },

 { "Go to "URL"","Gehe zu "URL"" },

 { "Ready.","Fertig." },

 { "password filename(*.pwm)","passwort dateiname(*.pwm)" },

 { "File error","Datei Fehler" },

 { "Could not read file!","Kann Datei nicht lesen!" },

 { "Master-password","Master-Passwort" },

 { "Please enter the master-password:","Bitter Master-Passwort eingeben:" },

 { "Wrong master-password!\nPlease try again.","Falsches Master-Passwort!\nBitte erneut versuchen." },

 { "password error","Passwort Fehler" },

 { "Successfully opened file.","Datei erfolgreich geöffnet." },

 { "DEEP-LOCKED","TOTAL-GESPERRT" },

 { "This file is DEEP-LOCKED!\nThat means all data has been encrypted\nand written out to the file. If you want\nto see the entries, please UNLOCK the file.\nWhile unlocking, you will be prompted for the\nmaster-password or the key-card.","Diese Datei ist TOTAL-GESPERRT!\nDas bedeutet, dass alle Daten verschlüsselt\nsind und in die Datei geschrieben wurden.\nWenn Sie die Einträge sehen möchten\nENTSPERREN Sie bitte die Datei.\nZum Entsperren werden Sie nach\ndem Master-Passwort gefragt." },

 { "<LOCKED>","<GESPERRT>" },

 { "To unlock click the icon on the left.","Zum Entsperren auf linkes Icon klicken." },

 { "PwManager","PwManager" },

 { "Window-style:","Window-Stil:" },

 { "Category on top","Kategorien oben" },

 { "Category-list left/top","Kategorien links oben" },

 { "Font for Password entries:","Schrift für Passwort Einträge:" },

 { "Font for Password summary:","Schrift für Passwort Übersicht:" },

 { "Font:","Schriftart:" },

 { "Summary","Übersicht" },

 { "Compression:","Kompression:" },

 { "gzip","gzip" },

 { "Encryption:","Verschlüsselung:" },

 { "Blowfish (128 bit)","Blowfish (128 bit)" },

 { "AES-128, Rijndael (128 bit)","AES-128, Rijndael (128 bit)" },

 { "AES-192, Rijndael (192 bit)","AES-192, Rijndael (192 bit)" },

 { "AES-256, Rijndael (256 bit)","AES-256, Rijndael (256 bit)" },

 { "Triple-DES (168 bit)","Triple-DES (168 bit)" },

 { "Twofish (256 bit)","Twofish (256 bit)" },

 { "Twofish-128 (128 bit)","Twofish-128 (128 bit)" },

 { "Hashing:","Hashing:" },

 { "SHA-160, SHA1 (160 bit)","SHA-160, SHA1 (160 bit)" },

 { "SHA-256 (256 bit)","SHA-256 (256 bit)" },

 { "SHA-384 (384 bit)","SHA-384 (384 bit)" },

 { "SHA-512 (512 bit)","SHA-512 (512 bit)" },

 { "MD5 (128 bit)","MD5 (128 bit)" },

 { "RIPE-MD-160 (160 bit)","RIPE-MD-160 (160 bit)" },

 { "Tiger (192 bit)","Tiger (192 bit)" },

 { "Permissions:","Zugriffsrechte:" },

 { "Make backup before saving","Mache Backup vor dem Speichern" },

 { "Password timeout\n(timeout to hold password in\nmemory,so you don't have to\nre-enter it,if you\nalready have entered it)\n[set to 0 to disable]:","Passwort Timeout\n(Timeout um das Passwort\nim Speicher zu halten,\nso dass es nicht noch mal\neingegeben werden muß.)\n[Setze auf 0 zum deaktivieren]:" },

 { "Auto-lock timeout\n(auto lock document after this\namount of seconds)\n[set to 0 to disable]:","(Total-)Sperr-Timeout\n(Sperre Dokument total nach\ndieser Anzahl Sekunden)\n[Setze auf 0 zum deaktivieren]:" },

 { "deep-lock on autolock","Sperre total beim Sperr-Timeout" },

 { "open deeplocked","Öffne total gesperrt" },

 { "Favourite browser:","Bevorzugter Browser:" },

 { "Favourite x-terminal:","Bevorzugtes x-terminal:" },

 { "Open document with passwords unlocked","Öffne Dokument mit Passwort ungesperrt" },

 { "Look && feel","Aussehen" },

 { "File","Datei" },

 { "Timeout","Timeout" },

 { "Autostart","Autostart" },

 { "External apps","Externe Applik." },

 { "Miscellaneous","Verschiedenes" },

 { "+01:00 Europe/Oslo(CET)","+01:00 Europe/Oslo(CET)" },

 { "edit category descriptions","Ändere Label für Kategorie" },

 { "Close","Schließen" },

 { "Category:","Category:" },

 { "Text1 (Description):","Text1 (Beschreibung):" },

 { "Text2 (Username):","Text2 (Benutzername):" },

 { "Text3 (Password):","Text3 (Passwort):" },

 { "edit/add a password entry","Ändere/hinzufüge Passwort Eintrag" },

 { "Description:","Beschreibung:" },

 { "Username:","Benutzername:" },

 { "Password:","Passwort:" },

 { "&Reveal","&Offen zeigen" },

 { "&Generate","&Generiere" },

 { "&Password","&Passwort" },

 { "&Comments","Kommentar" },

 { "Launcher:","Launcher:" },

 { "$d = Description","$d = Beschreibung" },

 { "$n = Username","$n = Benutzername" },

 { "$c = Comment","$c = Kommentar" },

 { "$u = URL","$u = URL" },

 { "$p = Password","$p = Passwort" },

 { "&Launcher","&Launcher" },

 { "Password generator","Passwort Generator" },

 { "Character set:","Buchstaben Set:" },

 { "Lowercase (abc)","Klein (abc)" },

 { "Uppercase (ABC)","Groß (ABC)" },

 { "Numbers (123)","Nummmern (123)" },

 { "Special characters:","Spezielle Buchstaben:" },

 { "Spaces (blank characters)","Leerzeichen" },

 { "User defined:","Benutzer definiert:" },

 { "Password Length:","Passwort Länge:" },

 { "Enable Filtering to get better passwords","Enable Filtering to get better passwords" },

 { "no password","Kein Passwort" },

 { "Sorry, you haven't set a password.","Sorry, Sie haben kein Passwort angegeben." },

 { "not saved, yet","not saved, yet" },

 { "Can't deep-lock, because the document\nhasn't been saved, yet. Please save\nto a file and try again.","Kann nicht tiefsperren, weil das\nDokument noch nicht gespeichert wurde.\nBitte speichern und noch einmal versuchen." },

 { "Find","Finde" },

 { "&Exact match","Genaue Übereinstimmung" },

 { "&Case sensitive","Großschrift abhängig" },

 { "Search in Column","Suche in Spalten" },

 { "&Description","Beschreibung" },

 { "C&omment","Kommentar" },

 { "&Username","Benutzername" },

 { "U&RL","URL" },

 { "delete?","Löschen?" },

 { "Do you really want to delete\nthe selected entry","Wollen Sie wirklich\nden Eintrag löschen:" },

 { "Save?","Speichern?" },

 { ""\nhas been modified.\nDo you want to save it?",""\nwurde geändert.\nMöchten Sie speichern?" },

 { "The list\n "","Die Liste\n "" },

 { "nothing to do","Nichts zu tun" },

 { "Sorry, there's nothing to save.\nPlease first add some passwords.","Sorry, es gibt nichts zu speichern.\nBitte erst Passwörter hinzufügen." },

 { "Add new password","Passwort hinzufügen" },

 { "Successfully saved data.","Datei gespeichert." },

 { "Category:","Kategorie:" },

 { "LOCKED","GESPERRT" },

 { "Colors","Farben" },

 { "Alternating background of list views","Abwechselnder Hintergrund für Listen" },

 { "Backup enabled","Backup angeschaltet" },

 { "Use standard backup dir","Standard Backupverzeichnis" },

 { "Number of Backups:","Anzahl der Backups" },

 { "Make backup every ","Mache ein Backup alle " },

 { " days"," Tage" }, 

 { "Creating backup ... please wait ...","Erzeuge Backup ... bitte warten ..." },

 { "Backup Failed!","Backup Problem!" },

 { "Try again now","Versuche jetzt nochmal" },

 { "Try again later","Versuche später nochmal" },

 { "Try again tomorrow","Versuche morgen nochmal" },

 { "Disable backup","Schalte Backup ab" },

 { "<b>Backup directory does not exist: </b>","<b>Backup Verzeichnis existiert nicht: </b>" },

 { "<b>The backup copy command failed!</b>","<b>Das Backup Kopierkommando is fehlgeschlagen!</b>" },

 { "Choose action","Wähle Aktion" },

+{ "&Configure PwM/Pi...","Konfiguriere PwM/Pi..." },

+{ "Global Settings...","Globale Einstellungen..." },

 { "","" },

 { "","" },

 { "","" },

 { "","" },

 { "","" },

 { "","" },

 

diff --git a/kaddressbook/kabcore.cpp b/kaddressbook/kabcore.cpp
index cd833cf..b107e2d 100644
--- a/kaddressbook/kabcore.cpp
+++ b/kaddressbook/kabcore.cpp
@@ -1438,387 +1438,387 @@ void KABCore::redo()
 void KABCore::setJumpButtonBar( bool visible )
 {
     setJumpButtonBarVisible(visible );
     saveSettings();
 }
 void KABCore::setJumpButtonBarVisible( bool visible )
 {
   if (mMultipleViewsAtOnce)
   {
     if ( visible )
       mJumpButtonBar->show();
     else
       mJumpButtonBar->hide();
   }
   else
   {
         // show the jumpbar only if "the details are hidden" == "viewmanager are shown"
     if (mViewManager->isVisible())
     {
       if ( visible )
         mJumpButtonBar->show();
       else
         mJumpButtonBar->hide();
         }
         else
         {
       mJumpButtonBar->hide();
         }
   }
   if ( visible ) {
       if ( mIncSearchWidget->currentItem() == 0 ) {
           message( i18n("Change search field enable jump bar") );
       }
   }
 }
 
 
 void KABCore::setDetailsToState()
 {
     setDetailsVisible(  mActionDetails->isChecked() );
 }
 void KABCore::setDetailsToggle()
 {
     mActionDetails->setChecked( !mActionDetails->isChecked() );
     setDetailsToState();
 }
 
 
 
 void KABCore::setDetailsVisible( bool visible )
 {
   if (visible && mDetails->isHidden())
   {
     KABC::Addressee::List addrList = mViewManager->selectedAddressees();
     if ( addrList.count() > 0 )
       mDetails->setAddressee( addrList[ 0 ] );
   }
 
   // mMultipleViewsAtOnce=false: mDetails is always visible. But we switch between
   // the listview and the detailview. We do that by changing the splitbar size.
   if (mMultipleViewsAtOnce)
   {
     if ( visible )
       mDetails->show();
     else
       mDetails->hide();
   }
   else
   {
     if ( visible ) {
       mViewManager->hide();
       mDetails->show();
       mIncSearchWidget->setFocus();
     }
     else {
       mViewManager->show();
       mDetails->hide();
       mViewManager->setFocusAV();
     }
     setJumpButtonBarVisible( !visible );
   }
 
 }
 
 void KABCore::extensionChanged( int id )
 {
   //change the details view only for non desktop systems
 #ifndef DESKTOP_VERSION
 
   if (id == 0)
   {
     //the user disabled the extension.
 
     if (mMultipleViewsAtOnce)
     { // enable detailsview again
       setDetailsVisible( true );
       mActionDetails->setChecked( true );
     }
     else
     {  //go back to the listview
       setDetailsVisible( false );
       mActionDetails->setChecked( false );
       mActionDetails->setEnabled(true);
         }
 
   }
   else
   {
     //the user enabled the extension.
     setDetailsVisible( false );
     mActionDetails->setChecked( false );
 
     if (!mMultipleViewsAtOnce)
     {
       mActionDetails->setEnabled(false);
         }
 
     mExtensionManager->setSelectionChanged();
 
   }
 
 #endif// DESKTOP_VERSION
 
 }
 
 
 void KABCore::extensionModified( const KABC::Addressee::List &list )
 {
 
   if ( list.count() != 0 ) {
     KABC::Addressee::List::ConstIterator it;
     for ( it = list.begin(); it != list.end(); ++it )
       mAddressBook->insertAddressee( *it );
     if ( list.count() > 1 )
         setModified();
     else
         setModifiedWOrefresh();
   }
   if ( list.count() == 0 )
     mViewManager->refreshView();
   else
      mViewManager->refreshView( list[ 0 ].uid() );
 
 
 
 }
 
 QString KABCore::getNameByPhone( const QString &phone )
 {
 #ifndef KAB_EMBEDDED
   QRegExp r( "[/*/-/ ]" );
   QString localPhone( phone );
 
   bool found = false;
   QString ownerName = "";
   KABC::AddressBook::Iterator iter;
   KABC::PhoneNumber::List::Iterator phoneIter;
   KABC::PhoneNumber::List phoneList;
   for ( iter = mAddressBook->begin(); !found && ( iter != mAddressBook->end() ); ++iter ) {
     phoneList = (*iter).phoneNumbers();
     for ( phoneIter = phoneList.begin(); !found && ( phoneIter != phoneList.end() );
           ++phoneIter) {
       // Get rid of separator chars so just the numbers are compared.
       if ( (*phoneIter).number().replace( r, "" ) == localPhone.replace( r, "" ) ) {
         ownerName = (*iter).formattedName();
         found = true;
       }
     }
   }
 
   return ownerName;
 #else //KAB_EMBEDDED
   qDebug("KABCore::getNameByPhone finsih method");
   return "";
 #endif //KAB_EMBEDDED
 
 }
 void KABCore::openConfigGlobalDialog()
 {
     KPimPrefsGlobalDialog gc ( this );
     gc.exec();
 }
 void KABCore::openConfigDialog()
 {
     KDialogBase * ConfigureDialog = new KDialogBase (  KDialogBase::Plain , i18n("Configure KA/Pi"), KDialogBase::Default |KDialogBase::Cancel | KDialogBase::Apply | KDialogBase::Ok, KDialogBase::Ok,0, "name", true, true);
 
     KCMKabConfig* kabcfg = new KCMKabConfig( ConfigureDialog , "KCMKabConfig" );
     ConfigureDialog->setMainWidget( kabcfg );
     connect( ConfigureDialog, SIGNAL( applyClicked() ),
            this, SLOT( configurationChanged() ) );
     connect( ConfigureDialog, SIGNAL( applyClicked() ),
             kabcfg, SLOT( save() ) );
-    connect( ConfigureDialog, SIGNAL( okClicked() ),
+    connect( ConfigureDialog, SIGNAL( acceptClicked() ),
              this, SLOT( configurationChanged() ) );
-    connect( ConfigureDialog, SIGNAL( okClicked() ),
+    connect( ConfigureDialog, SIGNAL( acceptClicked() ),
              kabcfg, SLOT( save() ) );
     connect( ConfigureDialog, SIGNAL( defaultClicked() ),
              kabcfg, SLOT( defaults() ) );
     saveSettings();
     kabcfg->load();
 #ifndef DESKTOP_VERSION
     if ( QApplication::desktop()->height() <= 480 )
         ConfigureDialog->hideButtons(); 
     ConfigureDialog->showMaximized();
 #endif
     if ( ConfigureDialog->exec() )
         KMessageBox::information( this,  i18n("Some changes are only\neffective after a restart!\n") );
     delete ConfigureDialog;
 }
 
 void KABCore::openLDAPDialog()
 {
 #ifndef KAB_EMBEDDED
   if ( !mLdapSearchDialog ) {
     mLdapSearchDialog = new LDAPSearchDialog( mAddressBook, this );
     connect( mLdapSearchDialog, SIGNAL( addresseesAdded() ), mViewManager,
             SLOT( refreshView() ) );
     connect( mLdapSearchDialog, SIGNAL( addresseesAdded() ), this,
             SLOT( setModified() ) );
   } else
     mLdapSearchDialog->restoreSettings();
 
   if ( mLdapSearchDialog->isOK() )
     mLdapSearchDialog->exec();
 #else //KAB_EMBEDDED
   qDebug("KABCore::openLDAPDialog() finsih method");
 #endif //KAB_EMBEDDED
 }
 
 void KABCore::print()
 {
 #ifndef KAB_EMBEDDED
   KPrinter printer;
   if ( !printer.setup( this ) )
     return;
 
   KABPrinting::PrintingWizard wizard( &printer, mAddressBook,
                                       mViewManager->selectedUids(), this );
 
   wizard.exec();
 #else //KAB_EMBEDDED
   qDebug("KABCore::print() finsih method");
 #endif //KAB_EMBEDDED
 
 }
 
 
 void KABCore::addGUIClient( KXMLGUIClient *client )
 {
   if ( mGUIClient )
     mGUIClient->insertChildClient( client );
   else
     KMessageBox::error( this, "no KXMLGUICLient");
 }
 
 
 void KABCore::configurationChanged()
 {
   mExtensionManager->reconfigure();
 }
 
 void KABCore::addressBookChanged()
 {
 /*US
   QDictIterator<AddresseeEditorDialog> it( mEditorDict );
   while ( it.current() ) {
     if ( it.current()->dirty() ) {
       QString text = i18n( "Data has been changed externally. Unsaved "
                            "changes will be lost." );
       KMessageBox::information( this, text );
     }
     it.current()->setAddressee( mAddressBook->findByUid( it.currentKey() ) );
     ++it;
   }
 */
   if (mEditorDialog)
   {
     if (mEditorDialog->dirty())
     {
       QString text = i18n( "Data has been changed externally. Unsaved "
                            "changes will be lost." );
       KMessageBox::information( this, text );
     }
     QString currentuid = mEditorDialog->addressee().uid();
     mEditorDialog->setAddressee( mAddressBook->findByUid( currentuid ) );
   }
   mViewManager->refreshView();
 
 
 }
 
 AddresseeEditorDialog *KABCore::createAddresseeEditorDialog( QWidget *parent,
                                                              const char *name )
 {
 
     if ( mEditorDialog == 0 ) {
   mEditorDialog = new AddresseeEditorDialog( this, parent,
                                                  name ? name : "editorDialog" );
 
 
   connect( mEditorDialog, SIGNAL( contactModified( const KABC::Addressee& ) ),
            SLOT( contactModified( const KABC::Addressee& ) ) );
   //connect( mEditorDialog, SIGNAL( editorDestroyed( const QString& ) ),
   //       SLOT( slotEditorDestroyed( const QString& ) ) ;
     }
 
   return mEditorDialog;
 }
 
 void KABCore::slotEditorDestroyed( const QString &uid )
 {
     //mEditorDict.remove( uid );
 }
 
 void KABCore::initGUI()
 {
 #ifndef KAB_EMBEDDED
   QHBoxLayout *topLayout = new QHBoxLayout( this );
   topLayout->setSpacing( KDialogBase::spacingHint() );
 
   mExtensionBarSplitter = new QSplitter( this );
   mExtensionBarSplitter->setOrientation( Qt::Vertical );
 
   mDetailsSplitter = new QSplitter( mExtensionBarSplitter );
 
   QVBox *viewSpace = new QVBox( mDetailsSplitter );
   mIncSearchWidget = new IncSearchWidget( viewSpace );
   connect( mIncSearchWidget, SIGNAL( doSearch( const QString& ) ),
            SLOT( incrementalSearch( const QString& ) ) );
 
   mViewManager = new ViewManager( this, viewSpace );
   viewSpace->setStretchFactor( mViewManager, 1 );
 
   mDetails = new ViewContainer( mDetailsSplitter );
 
   mJumpButtonBar = new JumpButtonBar( this, this );
 
   mExtensionManager = new ExtensionManager( this, mExtensionBarSplitter );
 
   topLayout->addWidget( mExtensionBarSplitter );
   topLayout->setStretchFactor( mExtensionBarSplitter, 100 );
   topLayout->addWidget( mJumpButtonBar );
   //topLayout->setStretchFactor( mJumpButtonBar, 1 );
 
   mXXPortManager = new XXPortManager( this, this );
 
 #else //KAB_EMBEDDED
   //US initialize viewMenu before settingup viewmanager.
   //  Viewmanager needs this menu to plugin submenues.
   viewMenu = new QPopupMenu( this );
   settingsMenu = new QPopupMenu( this );
   //filterMenu = new QPopupMenu( this );
   ImportMenu = new QPopupMenu( this );
   ExportMenu = new QPopupMenu( this );
   syncMenu = new QPopupMenu( this );
   changeMenu= new QPopupMenu( this );
   beamMenu= new QPopupMenu( this );
 
 //US since we have no splitter for the embedded system, setup
 // a layout with two frames. One left and one right.
 
   QBoxLayout *topLayout;
 
   // = new QHBoxLayout( this );
 //  QBoxLayout *topLayout = (QBoxLayout*)layout();
 
 //  QWidget *mainBox = new QWidget( this );
 //  QBoxLayout * mainBoxLayout  = new QHBoxLayout(mainBox);
 
 #ifdef DESKTOP_VERSION
   topLayout = new QHBoxLayout( this );
 
 
   mMiniSplitter = new KDGanttMinimizeSplitter( Qt::Horizontal, this);
   mMiniSplitter->setMinimizeDirection ( KDGanttMinimizeSplitter::Right );
 
   topLayout->addWidget(mMiniSplitter );
 
   mExtensionBarSplitter = new KDGanttMinimizeSplitter( Qt::Vertical,mMiniSplitter );
   mExtensionBarSplitter->setMinimizeDirection ( KDGanttMinimizeSplitter::Down );
   mViewManager = new ViewManager( this, mExtensionBarSplitter  );
   mDetails = new ViewContainer( mMiniSplitter );
   mExtensionManager = new ExtensionManager( this, mExtensionBarSplitter );
 #else
   if ( QApplication::desktop()->width() > 480 ) {
       topLayout = new QHBoxLayout( this );
       mMiniSplitter = new KDGanttMinimizeSplitter( Qt::Horizontal, this);
@@ -3241,194 +3241,194 @@ bool KABCore::synchronizeAddressbooks( KABC::AddressBook* local, KABC::AddressBo
     }
     return syncOK;
 }
 
 
 //this is a overwritten callbackmethods from the syncinterface
 bool KABCore::sync(KSyncManager* manager, QString filename, int mode)
 { 
 
     //pending prepare addresseeview for output
     //pending detect, if remote file has REV field. if not switch to external sync
     mGlobalSyncMode = SYNC_MODE_NORMAL;
     if ( manager != syncManager )
         qDebug("KABCore::sync:: ERROR! :: manager != syncManager ");
     QString mCurrentSyncDevice = manager->getCurrentSyncDevice();
 
     AddressBook abLocal(filename,"syncContact");
     bool syncOK = false;
     if ( abLocal.load() ) {
         qDebug("KA: Sync::AB loaded %s,sync mode %d",filename.latin1(), mode );
         bool external = false;
         bool isXML = false;
         if ( filename.right(4) == ".xml") {
             mGlobalSyncMode = SYNC_MODE_EXTERNAL;
             isXML = true;
             abLocal.preExternSync( mAddressBook ,mCurrentSyncDevice, true );
         } else {
             external = !manager->mIsKapiFile;
             if ( external ) {
                 qDebug("KA: Sync::Setting vcf mode to external ");
                 mGlobalSyncMode = SYNC_MODE_EXTERNAL;
                 AddressBook::Iterator it;  
                 for ( it = abLocal.begin(); it != abLocal.end(); ++it ) {
                     (*it).setID( mCurrentSyncDevice, (*it).uid() );
                     (*it).computeCsum( mCurrentSyncDevice );
                 }
             }
         }
         //AddressBook::Iterator it;
         //QStringList vcards;
         //for ( it = abLocal.begin(); it != abLocal.end(); ++it ) {
         //  qDebug("Name %s ", (*it).familyName().latin1());
         //}
         syncOK = synchronizeAddressbooks( mAddressBook, &abLocal, mode );
         syncManager->hideProgressBar();
         if (  syncOK ) {
             if ( syncManager->mWriteBackFile )
                 {
                     if ( external )
                         abLocal.removeSyncAddressees( !isXML);
                     qDebug("KA: Sync::Saving remote AB ");
                     if ( ! abLocal.saveAB()) 
                         qDebug("KA: sync::Error writing back AB to file ");
                     if (  external ) {
                         // afterwrite processing
                         abLocal.postExternSync( mAddressBook,mCurrentSyncDevice ,isXML);
                     }
                 }
         }
         setModified();
         
     }
     abLocal.removeResources();
     if ( syncOK )
         mViewManager->refreshView();
     return syncOK;
 
 }
 void  KABCore::removeSyncInfo( QString syncProfile) 
 {
     qDebug("KA: AB:removeSyncInfo for profile %s ", syncProfile.latin1());
     mAddressBook->removeSyncInfo( syncProfile );
     setModified();
 }
 
 
 //this is a overwritten callbackmethods from the syncinterface
 bool KABCore::syncExternal(KSyncManager* manager, QString  resource)
 {
     if (  resource == "phone" )
         return syncPhone();
     disableBR( true );
    if ( manager != syncManager )
         qDebug("KABCore::syncExternal:: ERROR! :: manager != syncManager ");
     QString mCurrentSyncDevice = manager->getCurrentSyncDevice();
 
     AddressBook abLocal( resource,"syncContact");
     bool syncOK = false;
     message(i18n("Loading DTM address data..."), false);
     if ( abLocal.load() ) {
         qDebug("KA: AB sharp loaded ,sync device %s",mCurrentSyncDevice.latin1());
         mGlobalSyncMode = SYNC_MODE_EXTERNAL;
         message(i18n("Sync preprocessing..."),false);
         abLocal.preExternSync( mAddressBook ,mCurrentSyncDevice, false );
         message(i18n("Synchronizing..."),false);
         syncOK = synchronizeAddressbooks( mAddressBook, &abLocal, syncManager->mSyncAlgoPrefs );
         syncManager->hideProgressBar();
         if (  syncOK ) {
             if ( syncManager->mWriteBackFile ) {
                 abLocal.removeSyncAddressees( false );
                 message(i18n("Saving DTM address data..."),false);
                 abLocal.saveAB();
                 message(i18n("Sync postprocessing..."),false);
                 abLocal.postExternSync( mAddressBook,mCurrentSyncDevice, true );
             }
         } else
             message( i18n("Sync cancelled or failed.") );
         setModified();
     }
     abLocal.removeResources();
     if ( syncOK ) {
         mViewManager->refreshView();
         message(i18n("DTM syncing finished."));
     }
     disableBR( false );
     return syncOK;
 
 }
 void KABCore::message( QString m, bool startTimer)
 {
     topLevelWidget()->setCaption( m );
     qApp->processEvents();
     if ( startTimer )
         mMessageTimer->start( 15000, true );
     else
         mMessageTimer->stop();
 }
 bool KABCore::syncPhone()
 {
     QString mCurrentSyncDevice = syncManager->getCurrentSyncDevice();
     QString fileName = getPhoneFile();
     if ( !PhoneAccess::readFromPhone( fileName) ) {
         message(i18n("Phone access failed!"));
         return false;
     }   
     AddressBook abLocal( fileName,"syncContact");
     bool syncOK = false;
      {
          abLocal.importFromFile( fileName );
         qDebug("KA: AB phone loaded ,sync device %s",mCurrentSyncDevice.latin1());
         mGlobalSyncMode = SYNC_MODE_EXTERNAL;
         abLocal.preparePhoneSync( mCurrentSyncDevice, true );
         abLocal.preExternSync( mAddressBook ,mCurrentSyncDevice, true );
         syncOK = synchronizeAddressbooks( mAddressBook, &abLocal, syncManager->mSyncAlgoPrefs );
         syncManager->hideProgressBar();
         if (  syncOK ) {
             if ( syncManager->mWriteBackFile ) {
                 abLocal.removeSyncAddressees( true );
                 abLocal.saveABphone( fileName );
                 abLocal.findNewExtIds( fileName, mCurrentSyncDevice );
                 //abLocal.preparePhoneSync( mCurrentSyncDevice, false );
                 abLocal.postExternSync( mAddressBook,mCurrentSyncDevice, true );
             }
         }
         setModified();
     }
     abLocal.removeResources();
     if ( syncOK )
         mViewManager->refreshView();
     return syncOK;
 }
 void KABCore::getFile( bool success )
 {
     if ( ! success ) {
         message( i18n("Error receiving file. Nothing changed!") );
         return;
     }
     int count = mAddressBook->importFromFile( sentSyncFile() , false, true );
     if ( count )
         setModified( true );
     message( i18n("Pi-Sync successful!") );
     mViewManager->refreshView();
 }
 void KABCore::syncFileRequest()
 { 
     if ( KABPrefs::instance()->mPassiveSyncWithDesktop ) {
         syncManager->slotSyncMenu( 999 );
     } 
     mAddressBook->export2File( sentSyncFile() );
 }
 QString KABCore::sentSyncFile()
 {
 #ifdef DESKTOP_VERSION
     return  locateLocal( "tmp", "copysyncab.vcf" );
 #else
     return QString( "/tmp/copysyncab.vcf" );
 #endif 
 }
 
 void KABCore::setCaptionBack()
 {
     mMessageTimer->stop();
-    topLevelWidget()->setCaption( i18n("KAddressbook/Pi") );
+    topLevelWidget()->setCaption( i18n("KA/Pi") );
 }
diff --git a/kmicromail/koprefsdialog.cpp b/kmicromail/koprefsdialog.cpp
index 7de7064..017f1f7 100644
--- a/kmicromail/koprefsdialog.cpp
+++ b/kmicromail/koprefsdialog.cpp
@@ -1,430 +1,425 @@
 /*
     This file is part of KOrganizer.
     Copyright (c) 2000,2001 Cornelius Schumacher <schumacher@kde.org>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
     the Free Software Foundation; either version 2 of the License, or
     (at your option) any later version.
 
     This program is distributed in the hope that it will be useful,
     but WITHOUT ANY WARRANTY; without even the implied warranty of
     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
     GNU General Public License for more details.
 
     You should have received a copy of the GNU General Public License
     along with this program; if not, write to the Free Software
     Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
 
     As a special exception, permission is given to link this program
     with any edition of Qt, and distribute the resulting executable,
     without including the source code for Qt in the source distribution.
 */
 #include <kdialog.h>
 #include <qlayout.h>
 #include <qlabel.h>
 #include <qgroupbox.h>
 #include <qbuttongroup.h>
 #include <qlineedit.h>
 #include <qfont.h>
 #include <qslider.h>
 #include <qfile.h>
 #include <qtextstream.h>
 #include <qcombobox.h>
 #include <qvbox.h>
 #include <qhbox.h>
 #include <qregexp.h>
 #include <qspinbox.h>
 #include <qdatetime.h>
 #include <qcheckbox.h>
 #include <qradiobutton.h>
 #include <qpushbutton.h>
 #include <qstrlist.h>
 #include <qapplication.h>
 
 #include <kcolorbutton.h>
 #include <kdebug.h>
 #include <klocale.h>
 #include <kglobal.h>
 #include <kfontdialog.h>
 #include <kfiledialog.h>
 #include <kmessagebox.h>
 #include <kcolordialog.h>
 #include <kiconloader.h>
 #include <kemailsettings.h>
 #include <kstandarddirs.h>
 #include <kglobalsettings.h>
 
 #include <klineedit.h>
 
 
 #include "koprefs.h"
 
 #include "koprefsdialog.h"
 //#include <kprefswidget.h>
 
 
 KOPrefsDialog::KOPrefsDialog(QWidget *parent, char *name, bool modal) :
   KPrefsDialog(KOPrefs::instance(),parent,name,true)
 {
   
     setFont( KGlobalSettings::generalMaxFont() );
   setCaption( i18n("Settings - some need a restart (nr)"));
   setupGlobalTab();
   setupMainTab();
   setupMailTab();;
   setupFontsTab();
   readConfig();
 #ifndef DESKTOP_VERSION
   if ( QApplication::desktop()->height() == 480  )
       hideButtons();
 #endif
 
 #if 0
 
   setupMainTab();
   setupLocaleTab();
   setupTimeZoneTab();
   setupTimeTab();
   setupLocaleDateTab();
   setupFontsTab();
   setupColorsTab();
   setupViewsTab();
   //setupSyncTab();
   //setupSyncAlgTab();
   //setupPrinterTab();
   //setupGroupSchedulingTab();
   //setupGroupAutomationTab();
 #endif
 }
 
 #include "kpimglobalprefs.h"
 
 KOPrefsDialog::~KOPrefsDialog()
 {
 }
 void KOPrefsDialog::setupGlobalTab() 
 {
-   QFrame *topFrame = addPage(i18n("Global"),0,0);
-   kdelibcfg = new KDEPIMConfigWidget(  KPimGlobalPrefs::instance(), topFrame, "KCMKdeLibConfig" );
-   QVBoxLayout *topLayout = new QVBoxLayout(topFrame);
-   topLayout->addWidget( kdelibcfg );
+   
 
 
 } 
 void KOPrefsDialog::setupMainTab() 
 {
     QFrame *topFrame = addPage(i18n("General"),0,0);
 
   QGridLayout *topLayout = new QGridLayout(topFrame,6,2);
   topLayout->setSpacing(spacingHint());
   topLayout->setMargin(marginHint());
 
 
   mNameEdit = new QLineEdit(topFrame);
   mNameLabel = new QLabel(mNameEdit, i18n("Full &name:"), topFrame);
   topLayout->addWidget(mNameLabel,0,0);
   topLayout->addWidget(mNameEdit,0,1);
 
   mEmailEdit = new QLineEdit(topFrame);
   mEmailLabel = new QLabel(mEmailEdit, i18n("E&mail address:"),topFrame);
   topLayout->addWidget(mEmailLabel,1,0);
   topLayout->addWidget(mEmailEdit,1,1); 
   QLabel *lab = new QLabel( i18n("HINT: Separate multiple\neMail addresses by \";\""), topFrame);
   topLayout->addMultiCellWidget(lab,2,2,0,1);
   KPrefsDialogWidBool*  ttt =  addWidBool(i18n("Ignore above settings and\nuse KA/Pi \"Who am I\" instead!"),
                                     &(KOPrefs::instance()->mUseKapi),topFrame);
   topLayout->addMultiCellWidget(ttt->checkBox(),3,3,0,1);
 }
 
 void KOPrefsDialog::setupMailTab()
 {
  QFrame *topFrame = addPage(i18n("Mail"),0,0);
 
   QGridLayout *topLayout = new QGridLayout(topFrame,4,2);
   topLayout->setSpacing(spacingHint());
   topLayout->setMargin(marginHint());
 
   KPrefsDialogWidBool*  ttt =  addWidBool(i18n("View mail as html"),
                  &(KOPrefs::instance()->mViewAsHtml),topFrame);
   topLayout->addMultiCellWidget(ttt->checkBox(),0,0,0,1);
   
   
   ttt =  addWidBool(i18n("Send mails later"),
                     &(KOPrefs::instance()->mSendLater),topFrame);
   topLayout->addMultiCellWidget(ttt->checkBox(),1,1,0,1);
   ttt =  addWidBool(i18n("Show \"To\" field in list view"),
                     &(KOPrefs::instance()->mShowToField),topFrame);
   topLayout->addMultiCellWidget(ttt->checkBox(),2,2,0,1);
 
   int iii =3;
   ttt =  addWidBool(i18n("Show info fields at startup"),
                     &(KOPrefs::instance()->mShowInfoStart),topFrame);
   topLayout->addMultiCellWidget(ttt->checkBox(),iii,iii,0,1);
   ++iii;
   ttt =  addWidBool(i18n("Show \"Subject\" info field"),
                     &(KOPrefs::instance()->mShowInfoSub),topFrame);
   topLayout->addMultiCellWidget(ttt->checkBox(),iii,iii,0,1);
   ++iii;
   ttt =  addWidBool(i18n("Show \"From\" info field"),
                     &(KOPrefs::instance()->mShowInfoFrom),topFrame);
   topLayout->addMultiCellWidget(ttt->checkBox(),iii,iii,0,1);
   ++iii;
   ttt =  addWidBool(i18n("Show \"To\" info field"),
                     &(KOPrefs::instance()->mShowInfoTo),topFrame);
   topLayout->addMultiCellWidget(ttt->checkBox(),iii,iii,0,1);
   ++iii;
 
   /*
   mCodecEdit = new QLineEdit(topFrame);
   topLayout->addMultiCellWidget( new QLabel(mCodecEdit, i18n("User defined codec for new mails:"), topFrame),2,2,0,1);
   topLayout->addMultiCellWidget(mCodecEdit,3,3,0,1);
   topLayout->addMultiCellWidget( new QLabel(0, i18n("Example: iso-8859-15"), topFrame),4,4,0,1);
   */
 }
 void KOPrefsDialog::setupFontsTab()
 {
 
     QFrame *topFrame = addPage(i18n("Fonts"),0,0);
     //  DesktopIcon("fonts",KIcon::SizeMedium));
 
   QGridLayout *topLayout = new QGridLayout(topFrame,7,3);
   topLayout->setSpacing(1);
   topLayout->setMargin(3);
   KPrefsDialogWidFont * tVFont;
   int i = 0;
   KPrefsDialogWidFont *timeLabelsFont =
       addWidFont(i18n("OK"),i18n("Application(nr)"),
                  &(KOPrefs::instance()->mAppFont),topFrame);
   topLayout->addWidget(timeLabelsFont->label(),i,0);
   topLayout->addWidget(timeLabelsFont->preview(),i,1);
   topLayout->addWidget(timeLabelsFont->button(),i,2);
   ++i;
 
 
   timeLabelsFont =
       addWidFont(i18n("Dear Mr."),i18n("Compose mail:"),
                  &(KOPrefs::instance()->mComposeFont),topFrame);
   topLayout->addWidget(timeLabelsFont->label(),i,0);
   topLayout->addWidget(timeLabelsFont->preview(),i,1);
   topLayout->addWidget(timeLabelsFont->button(),i,2);
   ++i;
 
   KPrefsDialogWidFont *timeBarFont =
       addWidFont(i18n("Hello"),i18n("Read mail:"),
                  &(KOPrefs::instance()->mReadFont),topFrame);
   topLayout->addWidget(timeBarFont->label(),i,0);
   topLayout->addWidget(timeBarFont->preview(),i,1);
   topLayout->addWidget(timeBarFont->button(),i,2);
   ++i;
 
   topLayout->setColStretch(1,1);
   topLayout->setRowStretch(4,1);
 
 }
 void KOPrefsDialog::usrReadConfig()
 {
  
   mNameEdit->setText(KOPrefs::instance()->mName);
   mEmailEdit->setText(KOPrefs::instance()->mEmail);
   //mCodecEdit->setText(KOPrefs::instance()->mSendCodec);
-  kdelibcfg->readConfig();
 }
 void KOPrefsDialog::usrWriteConfig()
 {
     KOPrefs::instance()->mName = mNameEdit->text();
     KOPrefs::instance()->mEmail = mEmailEdit->text();
     //KOPrefs::instance()->mSendCodec = mCodecEdit->text();
-    kdelibcfg->writeConfig();
  
     
 }
 
 #if 0
 void KOPrefsDialog::setupLocaleDateTab()
 {
 QFrame *topFrame = addPage(i18n("Date Format"),0,0);
    QGridLayout *topLayout = new QGridLayout(topFrame,3,2);
    topLayout->setSpacing(spacingHint());
    topLayout->setMargin(marginHint());  
    int iii = 0;
 
    
    KPrefsWidRadios *syncPrefsGroup =
        addWidRadios(i18n("Date Format:"),&(KOPrefs::instance()->mPreferredDate),topFrame);
    QString format;
    if ( QApplication::desktop()->width() < 480 )
        format = "(%d.%m.%Y)";
    else 
        format = "(%d.%m.%Y|%A %d %B %Y)";
    syncPrefsGroup->addRadio(i18n("24.03.2004 "+format));
    if ( QApplication::desktop()->width() < 480 )
        format = "(%m.%d.%Y)";
    else 
        format = "(%m.%d.%Y|%A %B %d %Y)";
    syncPrefsGroup->addRadio(i18n("03.24.2004 "+format));
    if ( QApplication::desktop()->width() < 480 )
        format = "(%Y-%m-%d)";
    else 
        format = "(%Y-%m-%d|%A %Y %B %d)";
    syncPrefsGroup->addRadio(i18n("2004-03-24 "+format));
    syncPrefsGroup->addRadio(i18n("User defined"));
    topLayout->addMultiCellWidget( syncPrefsGroup->groupBox(),iii,iii,0,1);
    ++iii;   
    ++iii;
    QLabel * lab;
    mUserDateFormatLong = new QLineEdit(topFrame);
    lab = new QLabel(mUserDateFormatLong, i18n("User long date:"), topFrame);
    topLayout->addWidget(lab ,iii,0);
    topLayout->addWidget(mUserDateFormatLong,iii,1);
    ++iii;
    mUserDateFormatShort = new QLineEdit(topFrame);
    lab = new QLabel(mUserDateFormatShort, i18n("User short date:"), topFrame);
    topLayout->addWidget(lab ,iii,0);
    topLayout->addWidget(mUserDateFormatShort,iii,1);
    ++iii;
    lab = new QLabel( i18n("Monday 19 April 2004: %A %d %B %Y"), topFrame);
    topLayout->addMultiCellWidget(lab ,iii,iii,0,1);
    ++iii;
    lab = new QLabel( i18n("Mon 19.04.04: %a %d.%m.%y"), topFrame);
    topLayout->addMultiCellWidget(lab ,iii,iii,0,1);
    ++iii;  
    lab = new QLabel( i18n("Mon, 19.Apr.04: %a, %d.%b.%y"), topFrame);
    topLayout->addMultiCellWidget(lab ,iii,iii,0,1);
    ++iii;
 
 }
 
 void  KOPrefsDialog::setupLocaleTab()
 {
  QFrame *topFrame = addPage(i18n("Locale"),0,0);
    QGridLayout *topLayout = new QGridLayout(topFrame,4,2);
    topLayout->setSpacing(spacingHint());
    topLayout->setMargin(marginHint());  
    int iii = 0;
  KPrefsWidRadios *syncPrefsGroup =
       addWidRadios(i18n("Language:(needs restart)"),&(KOPrefs::instance()->mPreferredLanguage),topFrame);
    syncPrefsGroup->addRadio(i18n("English"));
    syncPrefsGroup->addRadio(i18n("German")); 
    syncPrefsGroup->addRadio(i18n("French")); 
    syncPrefsGroup->addRadio(i18n("User defined (usertranslation.txt)")); 
    if (  QApplication::desktop()->width() <  300   ) 
        ;//   syncPrefsGroup->groupBox()-> setOrientation (Qt::Vertical);
    topLayout->addMultiCellWidget( syncPrefsGroup->groupBox(),iii,iii,0,1);
    ++iii;   
  
    syncPrefsGroup =
        addWidRadios(i18n("Time Format(nr):"),&(KOPrefs::instance()->mPreferredTime),topFrame);
    if (  QApplication::desktop()->width() >  300   )
        syncPrefsGroup->groupBox()-> setOrientation (Qt::Vertical);
    syncPrefsGroup->addRadio(i18n("24:00"));
    syncPrefsGroup->addRadio(i18n("12:00am"));
    syncPrefsGroup->groupBox()-> setOrientation (Qt::Vertical);
    topLayout->addMultiCellWidget( syncPrefsGroup->groupBox(),iii,iii,0,1);
    ++iii;   
    KPrefsDialogWidBool *sb;
   if ( QApplication::desktop()->width() <  300 ) {
        sb =
            addWidBool(i18n("Week starts on Sunday"),
                       &(KOPrefs::instance()->mWeekStartsOnSunday),topFrame);
        topLayout->addMultiCellWidget(sb->checkBox(), iii,iii,0,1);
        ++iii;   
        sb =
            addWidBool(i18n("Use short date in (WN/E) view"),
                       &(KOPrefs::instance()->mShortDateInViewer),topFrame);
        topLayout->addMultiCellWidget(sb->checkBox(), iii,iii,0,1);
    }
    else {
        QWidget * hb = new QWidget( topFrame );
        QHBoxLayout  *hbLayout = new QHBoxLayout(hb);
        sb =
            addWidBool(i18n("Week starts on Sunday"),
                       &(KOPrefs::instance()->mWeekStartsOnSunday),hb);
        hbLayout->addWidget(sb->checkBox()  );
        sb =
            addWidBool(i18n("Use short date in (WN/E) view"),
                       &(KOPrefs::instance()->mShortDateInViewer),hb);
        hbLayout->addWidget(sb->checkBox()  );
        topLayout->addMultiCellWidget(hb, iii,iii,0,1);
 
    }
   //#ifndef DESKTOP_VERSION
 #if 0
   ++iii;
   sb =
            addWidBool(i18n("Quick load/save (w/o Unicode)"), 
                       &(KOPrefs::instance()->mUseQuicksave),topFrame);
        topLayout->addMultiCellWidget(sb->checkBox(), iii,iii,0,1);
 #endif
 }
 void KOPrefsDialog::showSyncPage()
 {
     showPage ( 2 ) ;
 
 }
 void KOPrefsDialog::setupSyncAlgTab()
 {
 #if 0
   QLabel * lab;
    QFrame *topFrame = addPage(i18n("Sync Prefs"),0,0);
    mSetupSyncAlgTab = topFrame;
    QGridLayout *topLayout = new QGridLayout(topFrame,6,2);
    topLayout->setSpacing(spacingHint());
    topLayout->setMargin(marginHint());  
    int iii = 0;  
    
    KPrefsDialogWidBool *sb =
        addWidBool(i18n("Ask for preferences before syncing"),
                   &(KOPrefs::instance()->mAskForPreferences),topFrame);
    topLayout->addMultiCellWidget(sb->checkBox(), iii,iii,0,1);
 
    ++iii;
 
    KPrefsWidRadios *syncPrefsGroup =
       addWidRadios(i18n("Sync preferences:"),&(KOPrefs::instance()->mSyncAlgoPrefs),
                    topFrame);
    syncPrefsGroup->addRadio(i18n("Take local entry on conflict"));
    syncPrefsGroup->addRadio(i18n("Take remote entry on conflict"));
    syncPrefsGroup->addRadio(i18n("Take newest entry on conflict"));
    syncPrefsGroup->addRadio(i18n("Ask for every entry on conflict"));
    syncPrefsGroup->addRadio(i18n("Force take local entry always"));
    syncPrefsGroup->addRadio(i18n("Force take remote entry always"));
    topLayout->addMultiCellWidget( syncPrefsGroup->groupBox(),iii,iii,0,1);
    ++iii;   
   sb =
        addWidBool(i18n("Show summary after syncing"),
                   &(KOPrefs::instance()->mShowSyncSummary),topFrame);
    topLayout->addMultiCellWidget(sb->checkBox(), iii,iii,0,1);
 
    ++iii;
 #endif
 
 
 
 }
 
 
 void KOPrefsDialog::setupSyncTab()
 {
 #if 0
     QLabel * lab;
    QFrame *topFrame = addPage(i18n("Sync Network"),0,0);
    QGridLayout *topLayout = new QGridLayout(topFrame,6,2);
    topLayout->setSpacing(spacingHint());
    topLayout->setMargin(marginHint());
    lab = new QLabel(i18n("Remote syncing (via ssh/scp)\nnetwork settings "), topFrame);
    int iii = 0;
    topLayout->addMultiCellWidget(lab , iii,iii,0,1);
    ++iii;
 
    mRemoteIPEdit = new QLineEdit(topFrame);
    lab = new QLabel(mRemoteIPEdit, i18n("Remote IP:"), topFrame);
    topLayout->addWidget(lab ,iii,0);
    topLayout->addWidget(mRemoteIPEdit,iii,1);
    ++iii;
    mRemoteUser = new QLineEdit(topFrame);
    lab = new QLabel(mRemoteUser, i18n("Remote user:"), topFrame);
    topLayout->addWidget(lab ,iii,0);
    topLayout->addWidget(mRemoteUser, iii,1); 
    ++iii;
 
diff --git a/kmicromail/koprefsdialog.h b/kmicromail/koprefsdialog.h
index a0416ae..7fa9261 100644
--- a/kmicromail/koprefsdialog.h
+++ b/kmicromail/koprefsdialog.h
@@ -1,180 +1,179 @@
 /*
     This file is part of KOrganizer.
     Copyright (c) 2000,2001 Cornelius Schumacher <schumacher@kde.org>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
     the Free Software Foundation; either version 2 of the License, or
     (at your option) any later version.
 
     This program is distributed in the hope that it will be useful,
     but WITHOUT ANY WARRANTY; without even the implied warranty of
     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
     GNU General Public License for more details.
 
     You should have received a copy of the GNU General Public License
     along with this program; if not, write to the Free Software
     Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
 
     As a special exception, permission is given to link this program
     with any edition of Qt, and distribute the resulting executable,
     without including the source code for Qt in the source distribution.
 */
 #ifndef _KOPREFSDIALOG_H
 #define _KOPREFSDIALOG_H
 
 #include <qframe.h>
 #include <qdict.h>
 #include <qcolor.h>
 #include <qlistview.h>
 
 #include <kdialogbase.h>
 
 #include <libkdepim/kprefsdialog.h>
 #include <libkdepim/kdateedit.h>
 #include <kcmconfigs/kdepimconfigwidget.h>
 
 class KColorButton;
 class QSpinBox;
 class QSlider;
 class KURLRequester;
 class QComboBox;
 class QLineEdit;
 class QStringList;
 
 /** Dialog to change the korganizer configuration.
   */
 class KOPrefsDialog : public KPrefsDialog
 {
     Q_OBJECT
   public:
     /** Initialize dialog and pages */
     KOPrefsDialog(QWidget *parent=0,char *name=0,bool modal=false);
     ~KOPrefsDialog(); 
 
 protected:
     void usrReadConfig();
     void usrWriteConfig();
 
     void setupMainTab();
     void setupGlobalTab();
     void setupMailTab();
     void setupFontsTab();
  private:
-    KDEPIMConfigWidget* kdelibcfg;
     QLineEdit *mNameEdit;
     QLineEdit *mCodecEdit;
     QLineEdit *mEmailEdit;
     QLabel *mNameLabel;
     QLabel *mEmailLabel;
 #if 0
     /*
   public slots:
     void showPrinterTab();
     
    
     void updateCategories();
     void showSyncPage();
   protected slots:
     void selectSoundFile();
     void setCategoryColor();
     void updateCategoryColor();
     void updateTimezoneOffset( int );
 
 
     void warningExperimental(bool on);
     void warningGroupScheduling();
     void warningProjectView();
 
     void toggleEmailSettings(bool);
     
     //additional emails
     void addItem();
     void removeItem();
     void updateItem();
     void updateInput();
 */
   protected:
     void usrReadConfig();
     void usrWriteConfig();
 
     void setupMainTab();
     void setupTimeTab();
     void setupTimeZoneTab();
     void setupLocaleTab();
     void setupLocaleDateTab();
     void setupFontsTab();
     void setupColorsTab();
     void setupViewsTab();
     void setupDisplayTab();
     void setupPrinterTab();
     void setupGroupSchedulingTab();
     void setupGroupAutomationTab();
     void setupSyncTab();
     void setupSyncAlgTab();
 
     void setCombo(QComboBox *combo,const QString & text, const QStringList *tags = 0);
 
 
   private:
     KPrefsWidBool *mEnableGroupScheduling;
     KPrefsWidBool *mEnableProjectView;
 
     QFrame *mPrinterTab;
 
     QLineEdit *nameEdit;
     QLineEdit *emailEdit;
 
     QComboBox *timeCombo;
     QComboBox *tzCombo;
 
     // widgets holding preferences data
     QLineEdit *mNameEdit;
     QLineEdit *mEmailEdit;
     QLabel *mNameLabel;
     QLabel *mEmailLabel;
     QLineEdit *mAdditionalEdit;
     QSpinBox  *mAutoSaveIntervalSpin;
     QSpinBox  *mPrioSpin;
     //   QListView *mAMails;
     QLineEdit *aEmailsEdit;
 
     QComboBox    *mTimeZoneCombo;
     QStringList  tzonenames;
     QSpinBox     *mStartTimeSpin;
     QSpinBox     *mDefaultDurationSpin;
     QComboBox    *mAlarmTimeCombo;
 
     QComboBox     *mCategoryCombo;
     KColorButton  *mCategoryButton;
     QDict<QColor> mCategoryDict;
 
     QSlider   *mHourSizeSlider;
 
     QSpinBox  *mNextXDaysSpin;
     QSpinBox  *mWhatsNextSpin;
 
     QLineEdit * mRemoteIPEdit;
     QLineEdit * mRemoteUser;
     QLineEdit * mRemotePassWd;
     QLineEdit * mRemoteFile;
     QLineEdit * mLocalTempFile;
     QWidget* mSetupSyncAlgTab;
     QLineEdit * mUserDateFormatLong;
     QLineEdit * mUserDateFormatShort;
 
     QSpinBox     *mTimezoneOffsetSpin;
     QSpinBox     *mDaylightsavingStart;
     QSpinBox     *mDaylightsavingEnd;
     KDateEdit* mStartDateSavingEdit;
     KDateEdit* mEndDateSavingEdit;
     QSpinBox     * mAlarmPlayBeeps;
     QSpinBox     * mAlarmSuspendTime;
     QSpinBox     * mAlarmSuspendCount;
     QSpinBox     * mAlarmBeepInterval;
 
     QLineEdit * mDefaultAlarmFile;
 #endif
 };
 
 #endif
diff --git a/kmicromail/mainwindow.cpp b/kmicromail/mainwindow.cpp
index 9a52d1b..e3c5ec3 100644
--- a/kmicromail/mainwindow.cpp
+++ b/kmicromail/mainwindow.cpp
@@ -1,416 +1,429 @@
 
 // CHANGED 2004-08-06 Lutz Rogowski
 #include <qlabel.h>
 #include <qvbox.h>
 #include <qheader.h>
 #include <qtimer.h>
 #include <qlayout.h>
 //#include <kdialog.h>
 #include <kiconloader.h>
 #include <kapplication.h>
 
 #ifdef DESKTOP_VERSION
 #include <qapplication.h>
 #include <qstatusbar.h> 
 #include <kabc/stdaddressbook.h>
 extern QStatusBar* globalSstatusBarMainWindow;
 #else
 #include <qpe/qpeapplication.h>
 #include <klocale.h>
 #endif
 #include "defines.h"
 #include "koprefs.h"
 #include "mainwindow.h"
 #include "mailistviewitem.h"
 #include <KDGanttMinimizeSplitter.h>
 
 #include "koprefs.h"
 
 MainWindow::MainWindow( QWidget *parent, const char *name, WFlags flags )
     : QMainWindow( parent, name ) //, flags )
 {
 #ifdef DESKTOP_VERSION
     globalSstatusBarMainWindow = statusBar();
 #endif
     setCaption( i18n( "KOpieMail/Pi" ) );
     setToolBarsMovable( false ); 
     //KABC::StdAddressBook::self();
     toolBar = new QToolBar( this );
     menuBar = new QPEMenuBar( toolBar );
     mailMenu = new QPopupMenu( menuBar );
     menuBar->insertItem( i18n( "Mail" ), mailMenu );
     settingsMenu = new QPopupMenu( menuBar );
     menuBar->insertItem( i18n( "Settings" ), settingsMenu );
 
     addToolBar( toolBar );
     toolBar->setHorizontalStretchable( true );
     QAction* getMail = new QAction( i18n( "Get all new mails" ), SmallIcon("enter"),
                                0, 0, this );
     connect(getMail, SIGNAL( activated() ),
             SLOT( slotGetAllMail() ) );
     getMail->addTo( mailMenu );
 
     getMail = new QAction( i18n( "Get new messages" ), SmallIcon("add"),
                                0, 0, this );
     getMail->addTo( toolBar );
     getMail->addTo( mailMenu );
     connect(getMail, SIGNAL( activated() ),
             SLOT( slotGetMail() ) );
 
     composeMail = new QAction( i18n( "Compose new mail" ), SmallIcon("composemail"),
                                0, 0, this );
     composeMail->addTo( toolBar );
     composeMail->addTo( mailMenu );
 
     sendQueued = new QAction( i18n( "Send queued mails" ), SmallIcon("sendqueued") ,
                               0, 0, this );
     sendQueued->addTo( toolBar );
     sendQueued->addTo( mailMenu );
 
     /*
     syncFolders = new QAction( i18n( "Sync mailfolders" ), ICON_SYNC,
                                0, 0, this );
     syncFolders->addTo( toolBar );
     syncFolders->addTo( mailMenu );
     */
 
     showFolders = new QAction( i18n( "Show/Hide folders" ), SmallIcon("showfolders") ,
                                0, 0, this, 0, true );
     showFolders->addTo( toolBar );
     showFolders->addTo( mailMenu );
     showFolders->setOn( true );
     connect(showFolders, SIGNAL( toggled(bool) ),
             SLOT( slotShowFolders(bool) ) );
 
     /*
       searchMails = new QAction( i18n( "Search mails" ), SmallIcon("find") ),
                                0, 0, this );
     searchMails->kopddTo( toolBar );
     searchMails->addTo( mailMenu );
     */
 
     deleteMails = new QAction(i18n("Delete Mail"),  SmallIcon("trash"), 0, 0, this);
     deleteMails->addTo( toolBar );
     deleteMails->addTo( mailMenu );
     connect( deleteMails, SIGNAL( activated() ),
              SLOT( slotDeleteAllMail() ) );
 
-    editSettings = new QAction( i18n( "Edit settings" ), SmallIcon("SettingsIcon")  ,
+    editSettings = new QAction( i18n( "Configure OM/Pi..." ), SmallIcon("SettingsIcon")  ,
                                 0, 0, this );
     editSettings->addTo( settingsMenu );
     connect( editSettings, SIGNAL( activated() ),
              SLOT( slotEditSettings() ) );
+
+
+    QAction * editSettings2 = new QAction( i18n( "Global Settings..." ), SmallIcon("SettingsIcon")  ,
+                                0, 0, this );
+    editSettings2->addTo( settingsMenu );
+    connect( editSettings2, SIGNAL( activated() ),
+             SLOT( slotEditGlobalSettings() ) );
+
+
+
     editAccounts = new QAction( i18n( "Configure accounts" ),  SmallIcon("editaccounts")  ,
                                 0, 0, this );
     editAccounts->addTo( settingsMenu );
     codecMenu = new QPopupMenu( menuBar );
     codecMenu->insertItem( "Western (iso-8859-1)",0,0);
     codecMenu->insertItem( "Cyrillic (iso-8859-5)",1,1);
     codecMenu->insertItem( "Western (iso-8859-15)",2,2);
     codecMenu->insertItem( "Chinese (big-5)",3,3);
     codecMenu->insertItem( "Unicode (utf-8)",4,4);
     codecMenu->insertItem( "Userdefined ("+KOPrefs::instance()->mSendCodec+")",5,5);
     //disabled
     //settingsMenu->insertItem( i18n("Codec for new mails"), codecMenu);
     //setCentralWidget( view );
 
     QVBox* wrapperBox = new QVBox( this );
     setCentralWidget( wrapperBox );
 
     // QWidget *view = new QWidget( wrapperBox );
     KDGanttMinimizeSplitter* splithor = new KDGanttMinimizeSplitter( Qt::Vertical, wrapperBox);
     splithor->setMinimizeDirection( KDGanttMinimizeSplitter::Down);
     KDGanttMinimizeSplitter* split = new KDGanttMinimizeSplitter( Qt::Horizontal, splithor);
     split->setMinimizeDirection( KDGanttMinimizeSplitter::Left);
     //layout = new QBoxLayout ( split, QBoxLayout::LeftToRight );
     subLE = 0;
     fromLE = 0;
     toLE = 0;
     if ( KOPrefs::instance()->mShowInfoSub ||  KOPrefs::instance()->mShowInfoFrom ||  KOPrefs::instance()->mShowInfoTo ) {
         QWidget* infoBox = new QWidget( splithor );
         QGridLayout *griLay = new QGridLayout( infoBox, 2,2);
         if ( KOPrefs::instance()->mShowInfoSub ) {
             griLay->addWidget( new QLabel ( i18n("Su:"), infoBox ),0,0 );
             griLay->addWidget( subLE = new QLineEdit( infoBox ),0,1) ;
         }
         if (  KOPrefs::instance()->mShowInfoFrom ) {
             griLay->addWidget( new QLabel ( i18n("Fr:"), infoBox ),1,0 );
             griLay->addWidget( fromLE = new QLineEdit( infoBox ),1,1) ;
         } 
         if ( KOPrefs::instance()->mShowInfoTo ) {
             griLay->addWidget( new QLabel ( i18n("To:"), infoBox ),2,0 );
             griLay->addWidget( toLE = new QLineEdit( infoBox ),2,1) ;
         } 
         infoBox->setMaximumHeight( infoBox->sizeHint().height() );
         if ( !KOPrefs::instance()->mShowInfoStart ) {
             QTimer::singleShot( 1,splithor, SLOT  ( toggle() ) );
         }
     }
 
 
     folderView = new AccountView( split );
     folderView->header()->hide();
     folderView->setRootIsDecorated( false );
     folderView->addColumn( i18n( "Mailbox" ) );
 
     //layout->addWidget( folderView );
 
     mailView = new QListView( split );
     mailView->addColumn( i18n( " " ) );
     mailView->addColumn( i18n( "Subject" ),QListView::Manual );
     mailView->addColumn( i18n( "Sender" ),QListView::Manual );
     mailView->addColumn( i18n( "Size" ),QListView::Manual);
     mailView->addColumn( i18n( "Date" ),QListView::Manual);
     if ( KOPrefs::instance()->mShowToField )
         mailView->addColumn( i18n( "To" ),QListView::Manual);
     mailView->setAllColumnsShowFocus(true);
     //mailView->setSorting(-1);
     mailView->setRootIsDecorated( false );
     statusWidget = new StatusWidget( wrapperBox );
     statusWidget->hide();
 
     //layout->addWidget( mailView );
     //layout->setStretchFactor( folderView, 1 );
     //layout->setStretchFactor( mailView, 2 );
 
     slotAdjustLayout();
 #ifndef DESKTOP_VERSION
     QPEApplication::setStylusOperation( mailView->viewport(),QPEApplication::RightOnHold);
     QPEApplication::setStylusOperation( folderView->viewport(),QPEApplication::RightOnHold);
     if ( subLE ) 
         QPEApplication::setStylusOperation( subLE ,QPEApplication::RightOnHold);
     if ( fromLE ) 
         QPEApplication::setStylusOperation( fromLE ,QPEApplication::RightOnHold);
     if ( toLE ) 
         QPEApplication::setStylusOperation( toLE ,QPEApplication::RightOnHold);
 #endif
     connect( mailView, SIGNAL(  doubleClicked (QListViewItem* )),this,
              SLOT( mailLeftClicked(QListViewItem*) ) );
     connect( mailView, SIGNAL(  returnPressed (QListViewItem* )),this,
              SLOT( mailLeftClicked(QListViewItem*) ) );
     connect( mailView, SIGNAL( mouseButtonPressed(int,QListViewItem*,const QPoint&,int) ),this,
              SLOT( mailHold(int,QListViewItem*,const QPoint&,int) ) );
     connect(folderView, SIGNAL(refreshMailview(const QValueList<RecMailP>&)),
             this,SLOT(refreshMailView(const QValueList<RecMailP>&)));
 
     connect( mailView, SIGNAL(  currentChanged  (QListViewItem* )),this,
              SLOT( setInfoFields(QListViewItem*) ) );
 
     connect( composeMail, SIGNAL( activated() ), SLOT( slotComposeMail() ) );
     connect( sendQueued, SIGNAL( activated() ), SLOT( slotSendQueued() ) );
 //    connect( searchMails, SIGNAL( activated() ), SLOT( slotSearchMails() ) );
     connect( editAccounts, SIGNAL( activated() ), SLOT( slotEditAccounts() ) );
     //mailView->setMultiSelection ( true );
     mailView->setSelectionMode( QListView::Extended );
     QValueList<int> list;
     int fw = 100;
     if ( QApplication::desktop()->width() > 320 )
         fw = 50;
     list.append( fw );
     list.append( 100 );
     split->setSizes( list );
     QTimer::singleShot( 1000, this, SLOT( slotAdjustColumns() ) );
     mailView->setShowSortIndicator ( true ); 
     QLabel *spacer = new QLabel( toolBar );
     spacer->setBackgroundMode( QWidget::PaletteButton );
     toolBar->setStretchableWidget( spacer );
 
     QAction* closeMail = new QAction(i18n("Close"),SmallIcon("exit"), 0, 0, this); 
     connect( closeMail, SIGNAL( activated() ), SLOT( close() ) );
     if ( QApplication::desktop()->width() > 320 )
         closeMail->addTo(toolBar);
         closeMail->addTo(mailMenu);
 
 
    QPopupMenu* helpMenu = new QPopupMenu( menuBar );
    menuBar->insertItem( i18n( "Help" ), helpMenu ); 
    QAction* li = new QAction(i18n("About"), QPixmap(), 0, 0, this); 
    connect( li, SIGNAL( activated() ), SLOT( showAbout()) );
    li->addTo(helpMenu);
    li = new QAction(i18n("Licence"),QPixmap(), 0, 0, this); 
    connect( li, SIGNAL( activated() ), SLOT( showLicence()) );
    li->addTo(helpMenu); 
    li = new QAction(i18n("LibEtPan Licence"), QPixmap(), 0, 0, this); 
    connect( li, SIGNAL( activated() ), SLOT( showEtpanLicence()) );
    li->addTo(helpMenu);
    connect( codecMenu, SIGNAL( activated(int) ), this, SLOT( slotSetCodec( int )) );
    slotSetCodec( KOPrefs::instance()->mCurrentCodec );
    menuBar->setMaximumWidth( menuBar->sizeHint().width());
    //menuBar->setMaximumSize( menuBar->sizeHint());
 #ifdef DESKTOP_VERSION
    resize ( 640, 480 );
 #endif
 }
 
 MainWindow::~MainWindow()
 {
 }
 
 void MainWindow::setInfoFields(QListViewItem* item )
 {
     if ( item == 0) {
     if ( subLE ) subLE->setText("");
     if ( fromLE ) fromLE->setText("");
     if ( toLE ) toLE->setText("");
         return;
     }
     RecMailP mail = ((MailListViewItem*)item)->data();
     if ( subLE ) subLE->setText(mail->getSubject());
     if ( fromLE ) fromLE->setText(mail->getFrom());
     if ( toLE ) toLE->setText(mail->To().join(";" ));
     if ( subLE ) subLE->setCursorPosition(0);
     if ( fromLE ) fromLE->setCursorPosition(0);
     if ( toLE ) toLE->setCursorPosition(0);
 
 }
 void MainWindow::slotSetCodec( int codec )
 { 
     codecMenu->setItemChecked(KOPrefs::instance()->mCurrentCodec, false  );
     //qDebug("codec %d ", codec);
     KOPrefs::instance()->mCurrentCodec = codec;
     KOPrefs::instance()->isDirty = true;
     QString name;
     switch ( codec ) {
     case 0:
         name = "iso-8859-1";
         break;
     case 1:
         name = "iso-8859-5";
         break;
     case 2:
         name = "iso-8859-15";
         break;
     case 3:
         name = "big-5";
         break;
     case 4:
         name = "utf-8";
         break;
     case 5:
         name = KOPrefs::instance()->mSendCodec.lower();
         break;
     }
     KOPrefs::instance()->mCurrentCodeName = name ;
     codecMenu->changeItem ( 5, "Userdefined ("+KOPrefs::instance()->mSendCodec+")");
     codecMenu->setItemChecked(KOPrefs::instance()->mCurrentCodec, true );
 }
 void  MainWindow::showLicence()
 {
     KApplication::showLicence();
 }
 void  MainWindow::showAbout()
 {
     QString version;
 #include <../version>
 
     QString cap = "About KOpieMail/Pi";
                 QString text =i18n("KOpieMail/Platform-independent\n") +
                         "(OM/Pi) " + version + " - "
                       
 #ifdef DESKTOP_VERSION
                         "Desktop Edition\n"
 #else
                        "PDA-Edition\nfor: Zaurus 5x00 / 7x0 / 8x0\n"
 #endif
                 "www.pi-sync.info\n\n"
 
 
 
 "Copyright (c) 2004 Lutz Rogowski <lutz@pi-sync.info>\n"
                 "KOpieMail/Pi is based on Opie Mail\n"
                 "Copyright (c) Rajko Albrecht and the Opie team\n"
                 "KOpieMail/Pi is licensed under the GPL\n"
                 "\n"
                 "KOpieMail/Pi uses LibEtPan - a mail stuff library\n"
         "Copyright (C) 2001, 2002 - DINH Viet Hoa\n"
                 "libEtPan has its own licence - see LibEtPan licence\n";
 
     KApplication::showText( cap, text );
 }
 void  MainWindow::showEtpanLicence()
 {
     KApplication::showFile( "LibEtPan licence", "kdepim/kopiemail/COPYRIGHTlibetpan" );
 
 } 
 void MainWindow::appMessage(const QCString &, const QByteArray &)
 {
     qDebug("appMessage implemented by subclass");
 }
 
 void MainWindow::slotAdjustLayout() {
 
     /*
   QWidget *d = QApplication::desktop();
 
   if ( d->width() < d->height() ) {
     layout->setDirection( QBoxLayout::TopToBottom );
     } else {
     layout->setDirection( QBoxLayout::LeftToRight );
   }
     */
 }
 
 void MainWindow::slotAdjustColumns()
 {
     bool hidden = folderView->isHidden();
     if ( hidden ) folderView->show();
     folderView->setColumnWidth( 0, folderView->visibleWidth() );
     if ( hidden ) folderView->hide();
 
     mailView->setColumnWidth( 0, 10 );
     mailView->setColumnWidth( 1, 100 );
     mailView->setColumnWidth( 2, 100 );
     mailView->setColumnWidth( 3, 50 );
     mailView->setColumnWidth( 4, 120 );
     if ( KOPrefs::instance()->mShowToField )
         mailView->setColumnWidth( 5, 100 );
 }
 
 void MainWindow::slotEditSettings()
 {
 }
+void MainWindow::slotEditGlobalSettings()
+{
+}
 
 void MainWindow::slotShowFolders( bool )
 {
     qDebug("not implemented:  ");
 }
 
 void MainWindow::refreshMailView(const QValueList<RecMailP>&)
 { 
     qDebug("not implemented:  ");
 }
 
 void MainWindow::mailLeftClicked(QListViewItem * )
 {
     qDebug("not implemented:  ");
 }
 
 void MainWindow::displayMail()
 {
     qDebug("not implemented:  ");
 }
 
 void MainWindow::slotDeleteMail()
 {
     qDebug("not implemented:  ");
 }
 
 void MainWindow::mailHold(int, QListViewItem *,const QPoint&,int  )
 {
     qDebug("not implemented:  ");
 }
 
 void MainWindow::slotSendQueued()
 {
     qDebug("not implemented:  ");
 }
 
 void MainWindow::slotEditAccounts()
 {
     qDebug("not implemented:  ");
 }
 
 void MainWindow::slotComposeMail()
 {
     qDebug("not implemented:  ");
 }
diff --git a/kmicromail/mainwindow.h b/kmicromail/mainwindow.h
index ddb3fca..6894039 100644
--- a/kmicromail/mainwindow.h
+++ b/kmicromail/mainwindow.h
@@ -1,73 +1,74 @@
 
 // CHANGED 2004-08-06 Lutz Rogowski
 #ifndef MAINWINDOW_H
 #define MAINWINDOW_H
 
 #include <qmainwindow.h>
 #include <qlistview.h>
 #include <qaction.h>
 #include <qlineedit.h>
 
 #include <qtoolbar.h>
 #ifdef DESKTOP_VERSION
 #include <qmenubar.h>
 #define QPEMenuBar QMenuBar
 #else
 #include <qpe/qpemenubar.h>
 #endif
 
 #include "accountview.h"
 #include "statuswidget.h"
 
 #include <libmailwrapper/mailtypes.h>
 #include <opie2/osmartpointer.h>
 
 class RecMail;
 
 class MainWindow : public QMainWindow
 {
     Q_OBJECT
 
 public:
     MainWindow( QWidget *parent = 0, const char *name = 0, WFlags flags = 0 );
     virtual ~MainWindow();
 
 public slots:
     virtual void slotAdjustColumns();
     virtual void appMessage(const QCString &msg, const QByteArray &data);
     virtual void slotComposeMail();
 
 protected slots:
     virtual void setInfoFields(QListViewItem* );
     virtual void slotSendQueued();
     virtual void slotEditAccounts();
     virtual void slotShowFolders( bool show );
     virtual void refreshMailView(const QValueList<RecMailP>&);
     virtual void displayMail();
     virtual void slotGetMail() = 0;
     virtual void slotGetAllMail() = 0;
     virtual void slotDeleteMail();
     virtual void slotDeleteAllMail() = 0;
     virtual void slotSetCodec(int);
     virtual void mailHold(int, QListViewItem *,const QPoint&,int);
     virtual void slotAdjustLayout();
     virtual void slotEditSettings();
+    virtual void slotEditGlobalSettings();
     virtual void mailLeftClicked( QListViewItem * );
     void showLicence();
     void showAbout();
     void showEtpanLicence(); 
 
 protected:
     QToolBar *toolBar;
     StatusWidget *statusWidget;
     QPEMenuBar *menuBar;
     QPopupMenu *mailMenu, *settingsMenu, *codecMenu;
     QAction *composeMail, *sendQueued, *showFolders, *searchMails, *deleteMails,
             *editSettings, *editAccounts, *syncFolders;
     AccountView *folderView;
     QListView *mailView;
     QLineEdit* toLE,*fromLE,*subLE;
     //QBoxLayout *layout;
 };
 
 #endif
diff --git a/kmicromail/opiemail.cpp b/kmicromail/opiemail.cpp
index 4436ad6..8ac3451 100644
--- a/kmicromail/opiemail.cpp
+++ b/kmicromail/opiemail.cpp
@@ -55,384 +55,389 @@ OpieMail::OpieMail( QWidget *parent, const char *name )
        this, SLOT(insertAttendees(const QString&, const QStringList&, const QStringList&, const QStringList&)));
    folderView->setFocus(); 
 }
 
 OpieMail::~OpieMail()
 {
     if (settings) delete settings;
     if ( tb )
         delete tb;
 }
 
 void OpieMail::appMessage(const QCString &msg, const QByteArray &data)
 {
     
 }
 #include <stdlib.h>
 void OpieMail::message(const QCString &msg, const QByteArray &data)
 {
     // copied from old mail2
     static int ii = 0;
     //qDebug("QCOP CALL ############################# %d ", ii);
     //QString mess ( msg  );
     //qDebug("Message = %s ",mess.latin1());
     ++ii;
     //qDebug("KM:appMessage %d *%s* %x", ii, msg.data(), this);
 
     mPendingEmail = QString::null;
     mPendingName = QString::null;
     if (msg == "writeMail(QString,QString)")
     {
         //qDebug("writeMail(QString,QString) ");
         QDataStream stream(data,IO_ReadOnly);
         stream >> mPendingName >> mPendingEmail;
         // removing the whitespaces at beginning and end is needed!
         QTimer::singleShot ( 50, this, SLOT(slotComposeMail() ) ); 
     }
     else if (msg == "newMail()")
     {
         //qDebug("slotComposeMail() ");
         // we cannot call slotComposeMail(); directly, because may be executing a QCOP call
         // and a QCOP call does not like a processevents in his execution
         // with the Qtimer we call slotComposeMail() after we reached the main event loop
         QTimer::singleShot ( 50, this, SLOT(slotComposeMail() ) ); 
         // slotComposeMail();
     }
     else if (msg == "newMail(QString)")
     {
         //qDebug(" newMail(QString)");
         QDataStream stream(data,IO_ReadOnly);
         stream >> mPendingName;
         // the format is 
         //  NAME <EMAIL>:SUBJECT
         QTimer::singleShot ( 50, this, SLOT(slotComposeMail() ) ); 
     } else {
         mPendingData = data;
         mPendingMessage = msg;
         QTimer::singleShot ( 50, this, SLOT(slotExtAppHandler() ) ); 
     }
 
     //qDebug("END OpieMail::message ");
 }
 void OpieMail::slotExtAppHandler()
 {
     ExternalAppHandler::instance()->appMessage ( mPendingMessage, mPendingData );
 }
 void OpieMail::slotwriteMail2(const QString& namemail )
 {
     //qDebug("OpieMail::slotwriteMail2 ");
     //qApp->processEvents();
      ComposeMail compose( settings, this, 0, true );
     if ( !namemail.isEmpty() ) {
         QString to = namemail;
         if ( namemail.find( " <") > 1 ) {
             to = "\"" +to.replace( QRegExp( " <"), "\" <") ;
         } else 
         if ( namemail.find( "<") > 1 ) {
             to = "\"" +to.replace( QRegExp( "<"), "\" <") ;
         }
         int sub = to.find( ">:");
         if ( sub > 0 ) {
             compose.setTo( to.left(sub+1)  );
             compose.setSubject( to.mid(sub+2) );
         } else
             compose.setTo( to );
      }
     compose.slotAdjustColumns();
 #ifndef DESKTOP_VERSION
     compose.showMaximized();
 #endif
     mCurrentComposer = &compose;
     compose.exec();
     mCurrentComposer = 0;
     folderView->refreshOutgoing();
     raise();
     //qDebug("retttich ");
 }
 void OpieMail::slotwriteMail(const QString&name,const QString&email)
 {
     // qDebug("OpieMail::slotwriteMail ");
     ComposeMail compose( settings, this, 0, true );
     if (!email.isEmpty())
     {
         if (!name.isEmpty())
         {
             compose.setTo("\"" + name + "\"" + " " + "<"+ email + ">");
         }
         else
         {
             compose.setTo(email);
         }
     }
     compose.slotAdjustColumns();
 #ifndef DESKTOP_VERSION
     compose.showMaximized();
 #endif
 
     mCurrentComposer = &compose;
     compose.exec();
     mCurrentComposer = 0;
     folderView->refreshOutgoing();
     raise();
 }
 
 void OpieMail::slotComposeMail()
 {
     if ( mPendingEmail == QString::null && mPendingName == QString::null)
         slotwriteMail2( QString () );
     else {
         if ( mPendingEmail == QString::null )
             slotwriteMail2( mPendingName );
         else
             slotwriteMail( mPendingName, mPendingEmail );   
     }
     //slotwriteMail(0l,0l);
 }
 
 void OpieMail::slotSendQueued()
 {
     SMTPaccount *smtp = 0;
 
     QList<Account> list = settings->getAccounts();
     QList<SMTPaccount> smtpList;
     smtpList.setAutoDelete(false);
     Account *it;
     for ( it = list.first(); it; it = list.next() )
     {
         if ( it->getType() == MAILLIB::A_SMTP )
         {
             smtp = static_cast<SMTPaccount *>(it);
             smtpList.append(smtp);
         }
     }
     if (smtpList.count()==0)
     {
         QMessageBox::information(0,i18n("Info"),i18n("Define a smtp\n account first!\n"));
         return;
     }
     if ( QMessageBox::warning(this, i18n("Sending all mails"), i18n("Do you really want to\nsend all queued mails?" )  , QMessageBox::Yes, QMessageBox::No ) == QMessageBox::No )
         return;
     if (smtpList.count()==1)
     {
         smtp = smtpList.at(0);
     }
     else
     {
         smtp = 0;
         selectsmtp selsmtp;
         selsmtp.setSelectionlist(&smtpList);
         selsmtp.resize( selsmtp.sizeHint() );
         if (  selsmtp.exec() == QDialog::Accepted )
         {
             smtp = selsmtp.selected_smtp();
         }
     }
     if (smtp)
     {
      
         Global::statusMessage("Sending mails...!");
         SMTPwrapper * wrap = new SMTPwrapper(smtp);
         if ( wrap->flushOutbox() )
         {
             Global::statusMessage("Mails sent!");
         } 
         delete wrap;
     }
     folderView->refreshOutgoing();
 }
 
 void OpieMail::slotSearchMails()
 {
     qDebug("OpieMail::slotSearchMails():not implemented ");
 }
+void OpieMail::slotEditGlobalSettings()
+{
+    KPimPrefsGlobalDialog gc ( this );
+    gc.exec();
+}
 
 void OpieMail::slotEditSettings()
 {
 
     KOPrefsDialog settingsDialog( this,  "koprefs", true );
 #ifndef DESKTOP_VERSION
     settingsDialog.showMaximized();
 #endif
     settingsDialog.exec();
 
    slotSetCodec( KOPrefs::instance()->mCurrentCodec );
     //    KApplication::execDialog(settingsDialog);
 }
 
 void OpieMail::slotEditAccounts()
 {
     EditAccounts eaDialog( settings, this, 0, true );
     eaDialog.slotAdjustColumns();
 #ifndef DESKTOP_VERSION
     eaDialog.showMaximized();
 #endif
     eaDialog.exec();
     if ( settings ) delete settings;
     settings = new Settings();
 
     folderView->populate( settings->getAccounts() );
 }
 void OpieMail::replyMail()
 {
 
     QListViewItem*item = mailView->currentItem();
     if (!item) return;
     RecMailP mail = ((MailListViewItem*)item)->data();
     RecBodyP body = folderView->fetchBody(mail);
 
     QString rtext;
     rtext += QString("* %1 wrote on %2:\n")        // no i18n on purpose
         .arg(  mail->getFrom())
              .arg( mail->getDate());
 
     QString text = body->Bodytext();
     QStringList lines = QStringList::split(QRegExp("\\n"), text);
     QStringList::Iterator it;
     for (it = lines.begin(); it != lines.end(); it++)
     {
         rtext += "> " + *it + "\n";
     }
     rtext += "\n";
 
     QString prefix;
     if ( mail->getSubject().find(QRegExp("^Re: .*$")) != -1) prefix = "";
     else prefix = "Re: ";                // no i18n on purpose
 
     Settings *settings = new Settings();
     ComposeMail composer( settings ,this, 0, true);
     if (mail->Replyto().isEmpty()) {
         composer.setTo( mail->getFrom());
     } else {
         composer.setTo( mail->Replyto());
     }
     composer.setSubject( prefix + mail->getSubject());
     composer.setMessage( rtext );
     composer.setInReplyTo( mail->Msgid());
     composer.setCharset( body->getCharset() );
 
     mCurrentComposer = &composer;
     if ( QDialog::Accepted == KApplication::execDialog( &composer ) )
     {
         mail->Wrapper()->answeredMail(mail);
     }
     mCurrentComposer = 0;
     folderView->refreshOutgoing();
     delete settings;
 
 }
 void OpieMail::closeViewMail(ViewMail * vm)
 {
     vm->hide();
 }
 
 void  OpieMail::slotDownloadMail( )
 {
     QListViewItem*item = mailView->currentItem();
     if (!item ) {
         Global::statusMessage("Error: No item slected!");
         return;
     }
     RecMailP mail = ((MailListViewItem*)item)->data();
     Account * acc = mail->Wrapper()->getAccount();
     if ( !acc ) {
         Global::statusMessage("Mail is already stored locally!");
         return;
     }
     QString lfName = acc->getLocalFolder();
     //qDebug("local folder " + lfName );
     if ( lfName.isEmpty() )
         lfName = acc->getAccountName();
     AbstractMail* targetMail = folderView->allAccounts()[0]->getWrapper();
     //qDebug("target %d %d ",targetMail,mail->Wrapper() );
     if ( targetMail == mail->Wrapper() ) {
         Global::statusMessage("Mail is already locally stored!");
         return;
     }
     if ( !targetMail->createMbox(lfName)) {
         Global::statusMessage("Error creating folder!");
         return;
     }
     Global::statusMessage("Fetching mail...please wait!");
     qApp->processEvents();
     encodedString*st = 0;
     st = mail->Wrapper()->fetchRawBody(mail);
     if ( st ) {
         targetMail->storeMessage(st->Content(),st->Length(),lfName);
         Global::statusMessage("Mail stored in "+ lfName);
         delete st;
     } else {
         Global::statusMessage("Error: Cannot fetch mail!");
     }
 }
 
 
 void OpieMail::deleteAndDisplayNextMail(ViewMail * vm)
 {
     QListViewItem*item = mailView->currentItem();
     if (!item ) {
         closeViewMail(vm);
         return;
     }
     RecMailP mail = ((MailListViewItem*)item)->data();
     mail->Wrapper()->deleteMail( mail );
     item = item->itemBelow();
     if (!item ) {
         closeViewMail(vm);
         return;
     }
     mailView->setCurrentItem(item);
     mail = ((MailListViewItem*)item)->data();
     RecBodyP body = folderView->fetchBody(mail);
     vm->setBody( body );
     vm->setMail( mail );
 }
 void OpieMail::displayNextMail(ViewMail * vm)
 {
     QListViewItem*item = mailView->currentItem();
     if (!item) return;
     ( (MailListViewItem*)item )->setPixmap( 0, QPixmap() );
     item = item->itemBelow();
     if (!item) {
         vm->setCaption(i18n("End of List" ));
         return;
     }
     mailView->setCurrentItem(item);
     RecMailP mail = ((MailListViewItem*)item)->data();
     RecBodyP body = folderView->fetchBody(mail);
     vm->setBody( body );
     vm->setMail( mail );
 }
 void OpieMail::displayMail()
 {
     QListViewItem*item = mailView->currentItem();
     if (!item) return;
     RecMailP mail = ((MailListViewItem*)item)->data();
     RecBodyP body = folderView->fetchBody(mail);
     ViewMail readMail( this,"", Qt::WType_Modal   );
     readMail.setBody( body );
     readMail.setMail( mail );
 #ifndef DESKTOP_VERSION
     readMail.showMaximized();
 #else
     readMail.resize( 640, 480);
 #endif
     connect(  &readMail,SIGNAL( showNextMail(ViewMail *)  ), this, SLOT( displayNextMail(ViewMail *) ) );
     connect(  &readMail,SIGNAL( deleteAndDisplayNextMail(ViewMail *) ), this, SLOT(deleteAndDisplayNextMail(ViewMail *) ) );
     connect(  &readMail,SIGNAL( signalDownloadMail()  ), this, SLOT( slotDownloadMail() ) );
 
     readMail.exec();
 
     if (  readMail.deleted )
     {
         folderView->refreshCurrent();
     }
     else
     {
         QListViewItem*item = mailView->currentItem();
         if (item)
             ( (MailListViewItem*)item )->setPixmap( 0, QPixmap() );
     }
 }
 void OpieMail::slotGetAllMail()
 {
     QListViewItem * item = folderView->firstChild();
     while ( item ){
diff --git a/kmicromail/opiemail.h b/kmicromail/opiemail.h
index 4f75b3f..48c5dda 100644
--- a/kmicromail/opiemail.h
+++ b/kmicromail/opiemail.h
@@ -1,66 +1,67 @@
 // CHANGED 2004-09-31 Lutz Rogowski
 #ifndef OPIEMAIL_H
 #define OPIEMAIL_H
 
 #include "mainwindow.h"
 #include <libmailwrapper/settings.h>
 
 #include <opie2/osmartpointer.h>
 #include <libmailwrapper/mailtypes.h>
 #include <viewmail.h>
 #include <qstringlist.h>
 
 class ComposeMail;
 
 class OpieMail : public MainWindow
 {
     Q_OBJECT
 
 public:
     OpieMail( QWidget *parent = 0, const char *name = 0 );
     virtual ~OpieMail();
     static QString appName() { return QString::fromLatin1("kopiemail"); }
 
 public slots:
     virtual void slotwriteMail(const QString&name,const QString&email);
     virtual void slotwriteMail2(const QString&nameemail);
     virtual void slotComposeMail();
     virtual void slotExtAppHandler();
     virtual void appMessage(const QCString &msg, const QByteArray &data);
     virtual void message(const QCString &msg, const QByteArray &data);
     void insertAttendees(const QString&, const QStringList& namelist, const QStringList& emaillist, const QStringList& uidlist);
 protected slots:
     virtual void deleteAndDisplayNextMail(ViewMail * vm);
     virtual void displayNextMail(ViewMail * vm);
     virtual void slotSendQueued();
     virtual void slotSearchMails();
     virtual void slotEditSettings();
+    virtual void slotEditGlobalSettings();
     virtual void slotEditAccounts();
     virtual void displayMail();
     virtual void replyMail();
     virtual void slotDeleteMail();
     virtual void slotGetMail();
     virtual void slotGetAllMail();
     virtual void slotDeleteAllMail();
     virtual void mailHold(int, QListViewItem *,const QPoint&,int);
     virtual void slotShowFolders( bool show );
     virtual void refreshMailView(const QValueList<RecMailP>&);
     virtual void mailLeftClicked(  QListViewItem * );
     virtual void slotMoveCopyMail();
     virtual void slotMoveCopyAllMail();
     virtual void reEditMail();
     void clearSelection();
     void slotDownloadMail();
 private:
     ComposeMail* mCurrentComposer; 
     void closeViewMail(ViewMail * vm);
     QString mPendingEmail;
     QString mPendingName;
     QByteArray mPendingData;
     QCString mPendingMessage;
     Settings *settings;
     QTextBrowser * tb;
 
 };
 
 #endif
diff --git a/microkde/kdialogbase.cpp b/microkde/kdialogbase.cpp
index 11635e1..d5c7e61 100644
--- a/microkde/kdialogbase.cpp
+++ b/microkde/kdialogbase.cpp
@@ -97,200 +97,205 @@ void KDialogBase::init( const QString &caption, int buttonMask,
   }
 
   if ( buttonMask & Cancel ) {
     mCancelButton = new QPushButton( i18n("Cancel"), this );
     connect( mCancelButton, SIGNAL( clicked() ), SLOT( slotCancel() ) );
   } else {
     mCancelButton = 0;
   }
 
   if ( buttonMask & Close ) {
     mCloseButton = new QPushButton( i18n("Close"), this );
     connect( mCloseButton, SIGNAL( clicked() ), SLOT( slotClose() ) );
   } else {
     mCloseButton = 0;
   }
 }
 
 QTabWidget *KDialogBase::tabWidget()
 {
   if ( !mTabWidget ) {
     mTabWidget = new QTabWidget( this );
     setMainWidget( mTabWidget );
   }
   return mTabWidget;
 }
 
 void KDialogBase::hideButtons()
 {
     if ( mUser1Button ) mUser1Button->hide() ;
     if ( mUser2Button ) mUser2Button->hide() ;
     if ( mOkButton ) mOkButton->hide()  ;
     if ( mApplyButton )  mApplyButton->hide()  ;
     if ( mDefaultButton ) mDefaultButton->hide();
     if ( mCancelButton ) mCancelButton->hide()  ;
     if ( mCloseButton ) mCloseButton->hide()  ;
 
 }
 void KDialogBase::initLayout()
 {
 
   delete mTopLayout;
   mTopLayout = new QVBoxLayout( this );
   mTopLayout->setMargin( marginHintSmall() );
   mTopLayout->setSpacing( spacingHintSmall() );
 
   mTopLayout->addWidget( mMainWidget );
 
   QBoxLayout *buttonLayout = new QHBoxLayout;
   mTopLayout->addLayout( buttonLayout );
 
   if ( mUser1Button ) buttonLayout->addWidget( mUser1Button );
   if ( mUser2Button ) buttonLayout->addWidget( mUser2Button );
   if ( mOkButton ) buttonLayout->addWidget( mOkButton );
   if ( mApplyButton ) buttonLayout->addWidget( mApplyButton );
   if ( mDefaultButton ) buttonLayout->addWidget( mDefaultButton );
   if ( mCancelButton ) buttonLayout->addWidget( mCancelButton );
   if ( mCloseButton ) buttonLayout->addWidget( mCloseButton );
   buttonLayout->setMargin( marginHintSmall()  );
   buttonLayout->setSpacing( spacingHintSmall() );
 }
 
 QFrame *KDialogBase::addPage( const QString &name )
 {
 //  kdDebug() << "KDialogBase::addPage(): " << name << endl;
   QFrame *frame = new QFrame( tabWidget() );
   tabWidget()->addTab( frame, name );
   return frame;
 }
 
 QFrame *KDialogBase::addPage( const QString &name, int, const QPixmap & )
 {
   return addPage( name );
 }
 
 
 void KDialogBase::setMainWidget( QWidget *widget )
 {
   kdDebug() << "KDialogBase::setMainWidget()" << endl;
 
   mMainWidget = widget;
   initLayout();
 }
 
 void KDialogBase::setButtonText( ButtonCode id, const QString &text )
 {
   QPushButton *button = findButton( id );
   if ( button ) {
     button->setText( text );
   }
 }
 
 void KDialogBase::enableButton( ButtonCode id, bool state )
 {
   QPushButton *button = findButton( id );
   if ( button ) {
     button->setEnabled( state );
   }
 }
 
 QPushButton *KDialogBase::findButton( ButtonCode id )
 {
   QPushButton *button = 0;
   switch ( id ) {
     case Ok:
       button = mOkButton;
       break;
     case Apply:
       button = mApplyButton;
       break;
     case User1:
       button = mUser1Button;
       break;
     case User2:
       button = mUser2Button;
       break;
     case Cancel:
       button = mCancelButton;
       break;
     case Default:
       button = mDefaultButton;
       break;
     case Close:
       button = mCloseButton;
       break;
     default:
       break;
   }
   return button;
 }
 
 void KDialogBase::enableButtonOK( bool state )
 {
   enableButton( Ok, state );
 }
 
 void KDialogBase::enableButtonApply( bool state )
 {
   enableButton( Apply, state );
 }
 
 void KDialogBase::showButton( ButtonCode id, bool show )
 {
   QPushButton *button = findButton( id );
   if ( button ) {
     if ( show ) button->show();
     else button->hide();
   }
 }
 
 int KDialogBase::pageIndex( QWidget *widget ) const
 {
   return 0;
 }
 
 
 bool KDialogBase::showPage( int index )
 {
     tabWidget()->setCurrentPage( index );return false;
 }
 
 QFrame *KDialogBase::plainPage()
 {
   if ( !mPlainPage ) {
     mPlainPage = new QFrame( this );
     setMainWidget( mPlainPage );
   }
   return mPlainPage;
 }
 
 void KDialogBase::slotOk()
 {
   emit okClicked();
   accept();
 }
 
 void KDialogBase::slotApply()
 {
   emit applyClicked();
 }
 
 void KDialogBase::slotCancel()
 {
   emit cancelClicked();
   reject();
 }
 
 void KDialogBase::slotClose()
 {
   emit closeClicked();
   reject();
 }
 
+void KDialogBase::accept ()
+{
+    emit acceptClicked();
+    KDialog::accept();
+}
 void KDialogBase::slotUser1()
 {
   emit user1Clicked();
 }
 void KDialogBase::slotUser2()
 {
   emit user2Clicked();
 }
diff --git a/microkde/kdialogbase.h b/microkde/kdialogbase.h
index a2fc2dc..17c186b 100644
--- a/microkde/kdialogbase.h
+++ b/microkde/kdialogbase.h
@@ -1,141 +1,143 @@
 #ifndef MINIKDE_KDIALOGBASE_H
 #define MINIKDE_KDIALOGBASE_H
 
 #include <qframe.h>
 
 #include "kdialog.h"
 
 class QPushButton;
 class QLayout;
 class QTabWidget;
 class QBoxLayout;
 
 class KDialogBase : public KDialog
 {
     Q_OBJECT
   public:
     enum ButtonCode
     {
       Help    = 0x00000001,
       Default = 0x00000002,
       Ok      = 0x00000004,
       Apply   = 0x00000008,
       Try     = 0x00000010,
       Cancel  = 0x00000020,
       Close   = 0x00000040,
       User1   = 0x00000080,
       User2   = 0x00000100,
       User3   = 0x00000200,
       No      = 0x00000080,
       Yes     = 0x00000100,
       Details = 0x00000400,
       Filler  = 0x40000000,
       Stretch = 0x80000000
     };
 
     enum DialogType
     {
       TreeList,
       Tabbed,
       Plain, 
       Swallow,
       IconList
     };
 
     KDialogBase();
     KDialogBase( QWidget *parent=0, const char *name=0, bool modal=true,
                  const QString &caption=QString::null,
                  int buttonMask=Ok|Apply|Cancel, ButtonCode defaultButton=Ok,
                  bool separator=false, 
                  const QString &user1=QString::null,
                  const QString &user2=QString::null,
                  const QString &user3=QString::null);
     KDialogBase( int dialogFace, const QString &caption, 
                  int buttonMask, ButtonCode defaultButton, 
                  QWidget *parent=0, const char *name=0, bool modal=true, 
                  bool separator=false,
                  const QString &user1=QString::null,
                  const QString &user2=QString::null,
                  const QString &user3=QString::null);
     virtual ~KDialogBase();
     
     QFrame *addPage( const QString & );
     QFrame *addPage( const QString &, int, const QPixmap & );
 
     void setMainWidget( QWidget *widget );
 
     void setButtonText( ButtonCode id, const QString &text );
 
     void enableButton( ButtonCode id, bool state );
     void enableButtonOK( bool state );
     void enableButtonApply( bool state );
 
     void showButton( ButtonCode, bool show );
 
     int pageIndex( QWidget *widget ) const;
 
     bool showPage( int index );
     void hideButtons();
 
     QFrame *plainPage();
 
   signals:
     void user1Clicked();
     void user2Clicked();
  /**
      * The Apply button was pressed. This signal is only emitted if
      * @ref slotApply() is not replaced.
      */
     void applyClicked();
 
     /**
      * The OK button was pressed. This signal is only emitted if
      * @ref slotOk() is not replaced.
      */
     void okClicked();
     
     /**
      * The Cancel button was pressed. This signal is only emitted if
      * @ref slotCancel() is not replaced.
      */
     void cancelClicked();
     
     /**
      * The Close button was pressed. This signal is only emitted if
      * @ref slotClose() is not replaced.
      */
     void closeClicked();
     void defaultClicked();
 
+    void acceptClicked();
+
   protected slots:
     virtual void slotOk();
     virtual void slotApply();
     virtual void slotCancel();
     virtual void slotClose();
     virtual void slotUser1();
     virtual void slotUser2();
-
+    virtual void accept ();
   protected:
     QPushButton *findButton( ButtonCode );
     QTabWidget *tabWidget();
 
   private:
     void init( const QString &caption, int buttonMask,
                const QString &user1=QString::null, const QString &user2=QString::null );
     void initLayout();
 
     QWidget *mMainWidget;
     QTabWidget *mTabWidget;
     QFrame *mPlainPage;
     QBoxLayout *mTopLayout;
     
     QPushButton *mUser1Button;
     QPushButton *mUser2Button;
     QPushButton *mCloseButton;
     QPushButton *mOkButton;
     QPushButton *mApplyButton;
     QPushButton *mCancelButton;     
     QPushButton *mDefaultButton;    
 };
 
 #endif
diff --git a/pwmanager/pwmanager/kcmconfigs/kcmpwmconfig.h b/pwmanager/pwmanager/kcmconfigs/kcmpwmconfig.h
index b9ea6b8..2d19680 100644
--- a/pwmanager/pwmanager/kcmconfigs/kcmpwmconfig.h
+++ b/pwmanager/pwmanager/kcmconfigs/kcmpwmconfig.h
@@ -1,47 +1,48 @@
 /*
     This file is part of PwManager/Pi.
     Copyright (c) 2004 Ulf Schenk
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
     the Free Software Foundation; either version 2 of the License, or
     (at your option) any later version.
 
     This program is distributed in the hope that it will be useful,
     but WITHOUT ANY WARRANTY; without even the implied warranty of
     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
     GNU General Public License for more details.
 
     You should have received a copy of the GNU General Public License
     along with this program; if not, write to the Free Software
     Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
 
     As a special exception, permission is given to link this program
     with any edition of Qt, and distribute the resulting executable,
     without including the source code for Qt in the source distribution.
 */
 
 #ifndef KCMPWMCONFIG_H
 #define KCMPWMCONFIG_H
 
 #include <kcmodule.h>
 
 class PWMConfigWidget;
 class PWMPrefs;
 
 class KCMPwmConfig : public KCModule
 {
   Q_OBJECT
 
   public:
     KCMPwmConfig(QWidget *parent = 0, const char *name = 0 );
 
+  public slots:
     virtual void load();
     virtual void save();
     virtual void defaults();
 
   private:
     PWMConfigWidget *mConfigWidget;
 };
 
 #endif
diff --git a/pwmanager/pwmanager/pwm.cpp b/pwmanager/pwmanager/pwm.cpp
index 9c8d12d..e12dc49 100644
--- a/pwmanager/pwmanager/pwm.cpp
+++ b/pwmanager/pwmanager/pwm.cpp
@@ -1,556 +1,561 @@
 /***************************************************************************
  *                                                                         *
  *   copyright (C) 2003, 2004 by Michael Buesch                            *
  *   email: mbuesch@freenet.de                                             *
  *                                                                         *
  *   This program is free software; you can redistribute it and/or modify  *
  *   it under the terms of the GNU General Public License version 2        *
  *   as published by the Free Software Foundation.                         *
  *                                                                         *
  ***************************************************************************/
 
 /***************************************************************************
  * copyright (C) 2004 by Ulf Schenk
  * This file is originaly based on version 1.0.1 of pwmanager
  * and was modified to run on embedded devices that run microkde
  *
  * $Id$
  **************************************************************************/  
 
 #include <klocale.h>
 #include <klistview.h>
 #include <ktoolbar.h>
 #include <kfiledialog.h>
 #include <kiconloader.h>
 #include <kmessagebox.h>
 
 #include <qstatusbar.h>
 
 #ifndef PWM_EMBEDDED
 #include <kmenubar.h>
 #include <kstatusbar.h>
 #include <dcopclient.h>
 #include "configwndimpl.h"
 #include "configuration.h"
 #else
 #include <qmenubar.h>
 #include <qmessagebox.h>
 #include <pwmprefs.h>
 #include <kpimglobalprefs.h>
+#include <kprefsdialog.h>
 #include <kcmconfigs/kcmpwmconfig.h>
 #include <kcmconfigs/kcmkdepimconfig.h>
 #include <kcmultidialog.h>
 #include "editcategory.h"
 #endif
 
 
 #ifndef DESKTOP_VERSION
 #include <qpe/global.h>
 #endif
 
 #include <qpixmap.h>
 #include <qcheckbox.h>
 #include <qspinbox.h>
 #include <qlineedit.h>
 #include <qfileinfo.h>
 #include <qclipboard.h>
 
 
 #include <stdio.h>
 
 #include "pwm.h"
 #include "pwminit.h"
 #include "pwmprint.h"
 #include "addentrywndimpl.h"
 #include "globalstuff.h"
 #include "findwndimpl.h"
 #include "csv.h"
 
 #ifdef CONFIG_KWALLETIF
 # include "kwalletif.h"
 # include "kwalletemu.h"
 #endif
 #ifdef CONFIG_KEYCARD
 # include "pwmkeycard.h"
 #endif
 
-
         #define DEFAULT_SIZE    (QSize(700, 400))
 
 // Button IDs for "file" popup menu
 enum {
         BUTTON_POPUP_FILE_NEW = 0,
         BUTTON_POPUP_FILE_OPEN,
         BUTTON_POPUP_FILE_CLOSE,
         BUTTON_POPUP_FILE_SAVE,
         BUTTON_POPUP_FILE_SAVEAS,
         BUTTON_POPUP_FILE_EXPORT,
         BUTTON_POPUP_FILE_IMPORT,
         BUTTON_POPUP_FILE_PRINT,
         BUTTON_POPUP_FILE_QUIT
 };
 // Button IDs for "manage" popup menu
 enum {
         BUTTON_POPUP_MANAGE_ADD = 0,
         BUTTON_POPUP_MANAGE_EDIT,
         BUTTON_POPUP_MANAGE_DEL,
         BUTTON_POPUP_MANAGE_CHANGEMP
 };
 // Button IDs for chipcard popup menu
 enum {
 #ifdef CONFIG_KEYCARD
         BUTTON_POPUP_CHIPCARD_GENNEW = 0,
         BUTTON_POPUP_CHIPCARD_DEL,
         BUTTON_POPUP_CHIPCARD_READID,
         BUTTON_POPUP_CHIPCARD_SAVEBACKUP,
         BUTTON_POPUP_CHIPCARD_REPLAYBACKUP
 #else // CONFIG_KEYCARD
         BUTTON_POPUP_CHIPCARD_NO = 0
 #endif // CONFIG_KEYCARD
 };
 // Button IDs for "view" popup menu
 enum {
         BUTTON_POPUP_VIEW_FIND = 0,
         BUTTON_POPUP_VIEW_LOCK,
         BUTTON_POPUP_VIEW_DEEPLOCK,
         BUTTON_POPUP_VIEW_UNLOCK
 };
 // Button IDs for "options" popup menu
 enum {
-        BUTTON_POPUP_OPTIONS_CONFIG = 0
+        BUTTON_POPUP_OPTIONS_CONFIG = 0,
+        BUTTON_POPUP_OPTIONS_GLOBAL_CONFIG
 #ifdef PWM_EMBEDDED
         ,BUTTON_POPUP_OPTIONS_CATEGORY
 #endif
 };
 // Button IDs for "export" popup menu (in "file" popup menu)
 enum {
         BUTTON_POPUP_EXPORT_TEXT = 0,
         BUTTON_POPUP_EXPORT_GPASMAN,
         BUTTON_POPUP_EXPORT_CSV
 #ifdef CONFIG_KWALLETIF
         ,BUTTON_POPUP_EXPORT_KWALLET
 #endif
 };
 // Button IDs for "import" popup menu (in "file" popup menu)
 enum {
         BUTTON_POPUP_IMPORT_TEXT = 0,
         BUTTON_POPUP_IMPORT_GPASMAN,
         BUTTON_POPUP_IMPORT_CSV
 #ifdef CONFIG_KWALLETIF
         ,BUTTON_POPUP_IMPORT_KWALLET
 #endif
 };
 
 #ifdef PWM_EMBEDDED
 // Button IDs for "help" popup menu
 enum {
         BUTTON_POPUP_HELP_LICENSE = 0,
         BUTTON_POPUP_HELP_FAQ,
         BUTTON_POPUP_HELP_ABOUT,
         BUTTON_POPUP_HELP_SYNC,
         BUTTON_POPUP_HELP_WHATSNEW
 };
 #endif
 
 // Button IDs for toolbar
 enum {
         BUTTON_TOOL_NEW = 0,
         BUTTON_TOOL_OPEN,
         BUTTON_TOOL_SAVE,
         BUTTON_TOOL_SAVEAS,
         BUTTON_TOOL_PRINT,
         BUTTON_TOOL_ADD,
         BUTTON_TOOL_EDIT,
         BUTTON_TOOL_DEL,
         BUTTON_TOOL_FIND,
         BUTTON_TOOL_LOCK,
         BUTTON_TOOL_DEEPLOCK,
         BUTTON_TOOL_UNLOCK
 };
 
 
 PwM::PwM(PwMInit *_init, PwMDoc *doc,
          bool virginity,
          QWidget *parent, const char *name)
  : KMainWindow(parent, "HALLO")
  , forceQuit (false)
  , forceMinimizeToTray (false)
 {
     syncManager = 0;
     virgin = !virginity;
         init = _init;
         connect(doc, SIGNAL(docClosed(PwMDoc *)),
                 this, SLOT(docClosed(PwMDoc *)));
         initMenubar();
         initToolbar();
         initMetrics();
         setVirgin(virginity);
         setFocusPolicy(QWidget::WheelFocus);
 #ifndef PWM_EMBEDDED
         statusBar()->show();
 #endif
         view = makeNewListView(doc);
         setCentralWidget(view);
         updateCaption();
         showStatMsg(i18n("Ready."));
 }
 
 PwM::~PwM()
 {
     //qDebug("PwM::~PwM() %x", this);
         disconnect(curDoc(), SIGNAL(docClosed(PwMDoc *)),
                    this, SLOT(docClosed(PwMDoc *)));
         conf()->confWndMainWndSize(size());
     //LR closing of windows changed
     //needed for fastload option on PDA
         //emit closed(this);
         //qDebug("PwM::~PwM() emited closed(this)");
         delete view;
     delete syncManager;
 }
 
 void PwM::initMenubar()
 {
   KIconLoader* picons;
 #ifndef PWM_EMBEDDED
         KIconLoader icons;
         picons = &icons;
 #else
         picons = KGlobal::iconLoader();
 
 
         syncPopup = new KPopupMenu(this);
         
         syncManager = new KSyncManager((QWidget*)this, (KSyncInterface*)this, KSyncManager::PWMPI, PWMPrefs::instance(), syncPopup);
         syncManager->setBlockSave(false);
 
         connect ( syncPopup, SIGNAL( activated ( int )  ), syncManager, SLOT (slotSyncMenu( int ) ) );
         syncManager->fillSyncMenu();
 
 #endif
         filePopup = new KPopupMenu(this);
         importPopup = new KPopupMenu(filePopup);
         exportPopup = new KPopupMenu(filePopup);
         managePopup = new KPopupMenu(this);
 #ifdef CONFIG_KEYCARD
         chipcardPopup = new KPopupMenu(this);
 #endif // CONFIG_KEYCARD
         viewPopup = new KPopupMenu(this);
         optionsPopup = new KPopupMenu(this);
 
 // "file" popup menu
         filePopup->insertItem(QIconSet(picons->loadIcon("filenew", KIcon::Small)),
                               i18n("&New"), this,
                               SLOT(new_slot()), 0, BUTTON_POPUP_FILE_NEW);
         filePopup->insertItem(QIconSet(picons->loadIcon("fileopen", KIcon::Small)),
                               i18n("&Open"), this,
                               SLOT(open_slot()), 0, BUTTON_POPUP_FILE_OPEN);
         filePopup->insertItem(QIconSet(picons->loadIcon("fileclose", KIcon::Small)),
                               i18n("&Close"), this,
                               SLOT(close_slot()), 0, BUTTON_POPUP_FILE_CLOSE);
         filePopup->insertSeparator();
         filePopup->insertItem(QIconSet(picons->loadIcon("filesave", KIcon::Small)),
                               i18n("&Save"), this,
                               SLOT(save_slot()), 0, BUTTON_POPUP_FILE_SAVE);
         filePopup->insertItem(QIconSet(picons->loadIcon("filesaveas", KIcon::Small)),
                               i18n("Save &as..."),
                               this, SLOT(saveAs_slot()), 0,
                               BUTTON_POPUP_FILE_SAVEAS);
         filePopup->insertSeparator();
         // "file/export" popup menu
         exportPopup->insertItem(i18n("&Text-file..."), this,
                                 SLOT(exportToText()), 0, BUTTON_POPUP_EXPORT_TEXT);
         exportPopup->insertItem(i18n("&Gpasman / Kpasman ..."), this,
                                 SLOT(exportToGpasman()), 0, BUTTON_POPUP_EXPORT_GPASMAN);
         exportPopup->insertItem(i18n("&CSV (Comma Separated Value) ..."), this,
                                 SLOT(exportToCsv()), 0, BUTTON_POPUP_EXPORT_CSV);
 #ifdef CONFIG_KWALLETIF
         exportPopup->insertItem(i18n("&KWallet..."), this,
                                 SLOT(exportToKWallet()), 0, BUTTON_POPUP_EXPORT_KWALLET);
 #endif
         filePopup->insertItem(QIconSet(picons->loadIcon("fileexport", KIcon::Small)),
                               i18n("E&xport"), exportPopup,
                               BUTTON_POPUP_FILE_EXPORT);
         // "file/import" popup menu
         importPopup->insertItem(i18n("&Text-file..."), this,
                                 SLOT(importFromText()), 0, BUTTON_POPUP_IMPORT_TEXT);
         importPopup->insertItem(i18n("&Gpasman / Kpasman ..."), this,
                                 SLOT(importFromGpasman()), 0, BUTTON_POPUP_IMPORT_GPASMAN);
         importPopup->insertItem(i18n("&CSV (Comma Separated Value) ..."), this,
                                 SLOT(importCsv()), 0, BUTTON_POPUP_IMPORT_CSV);
 #ifdef CONFIG_KWALLETIF
         importPopup->insertItem(i18n("&KWallet..."), this,
                                 SLOT(importKWallet()), 0, BUTTON_POPUP_IMPORT_KWALLET);
 #endif
         filePopup->insertItem(QIconSet(picons->loadIcon("fileimport", KIcon::Small)),
                               i18n("I&mport"), importPopup,
                               BUTTON_POPUP_FILE_IMPORT);
         filePopup->insertSeparator();
 #if 0
         filePopup->insertItem(QIconSet(picons->loadIcon("fileprint", KIcon::Small)),
                               i18n("&Print..."), this,
                               SLOT(print_slot()), 0, BUTTON_POPUP_FILE_PRINT);
         filePopup->insertSeparator();
 #endif
         filePopup->insertItem(QIconSet(picons->loadIcon("exit", KIcon::Small)),
                               i18n("&Quit"), this,
                               SLOT(quitButton_slot()), 0, BUTTON_POPUP_FILE_QUIT);
         menuBar()->insertItem(i18n("&File"), filePopup);
 // "manage" popup menu
         managePopup->insertItem(QIconSet(picons->loadIcon("pencil", KIcon::Small)),
                                 i18n("&Add password"), this,
                                 SLOT(addPwd_slot()), 0,
                                 BUTTON_POPUP_MANAGE_ADD);
         managePopup->insertSeparator();
         managePopup->insertItem(QIconSet(picons->loadIcon("edit", KIcon::Small)),
                                 i18n("&Edit"), this, SLOT(editPwd_slot()), 0,
                                 BUTTON_POPUP_MANAGE_EDIT);
         managePopup->insertItem(QIconSet(picons->loadIcon("editdelete", KIcon::Small)),
                                 i18n("&Delete"), this, SLOT(deletePwd_slot()),
                                 0, BUTTON_POPUP_MANAGE_DEL);
         managePopup->insertSeparator();
         managePopup->insertItem(QIconSet(picons->loadIcon("rotate", KIcon::Small)),
                                 i18n("Change &Master Password"), this,
                                 SLOT(changeMasterPwd_slot()), 0,
                                 BUTTON_POPUP_MANAGE_CHANGEMP);
         menuBar()->insertItem(i18n("&Manage"), managePopup);
 // "chipcard" popup menu
 #ifdef CONFIG_KEYCARD
         chipcardPopup->insertItem(QIconSet(picons->loadIcon("filenew", KIcon::Small)),
                                   i18n("&Generate new key-card"), this,
                                   SLOT(genNewCard_slot()), 0,
                                   BUTTON_POPUP_CHIPCARD_GENNEW);
         chipcardPopup->insertItem(QIconSet(picons->loadIcon("editdelete", KIcon::Small)),
                                   i18n("&Erase key-card"), this,
                                   SLOT(eraseCard_slot()), 0,
                                   BUTTON_POPUP_CHIPCARD_DEL);
         chipcardPopup->insertItem(QIconSet(picons->loadIcon("", KIcon::Small)),
                                   i18n("Read card-&ID"), this,
                                   SLOT(readCardId_slot()), 0,
                                   BUTTON_POPUP_CHIPCARD_READID);
         chipcardPopup->insertSeparator();
         chipcardPopup->insertItem(QIconSet(picons->loadIcon("2rightarrow", KIcon::Small)),
                                   i18n("&Make card backup-image"), this,
                                   SLOT(makeCardBackup_slot()), 0,
                                   BUTTON_POPUP_CHIPCARD_SAVEBACKUP);
         chipcardPopup->insertItem(QIconSet(picons->loadIcon("2leftarrow", KIcon::Small)),
                                   i18n("&Replay card backup-image"), this,
                                   SLOT(replayCardBackup_slot()), 0,
                                   BUTTON_POPUP_CHIPCARD_REPLAYBACKUP);
         menuBar()->insertItem(i18n("&Chipcard manager"), chipcardPopup);
 #endif // CONFIG_KEYCARD
 // "view" popup menu
         viewPopup->insertItem(QIconSet(picons->loadIcon("find", KIcon::Small)),
                                 i18n("&Find"), this,
                                 SLOT(find_slot()), 0, BUTTON_POPUP_VIEW_FIND);
         viewPopup->insertSeparator();
         viewPopup->insertItem(QIconSet(picons->loadIcon("halfencrypted", KIcon::Small)),
                                 i18n("&Lock all entries"), this,
                                 SLOT(lockWnd_slot()), 0,
                                 BUTTON_POPUP_VIEW_LOCK);
         viewPopup->insertItem(QIconSet(picons->loadIcon("encrypted", KIcon::Small)),
                                 i18n("&Deep-lock all entries"), this,
                                 SLOT(deepLockWnd_slot()), 0,
                                 BUTTON_POPUP_VIEW_DEEPLOCK);
         viewPopup->insertItem(QIconSet(picons->loadIcon("decrypted", KIcon::Small)),
                                 i18n("&Unlock all entries"), this,
                                 SLOT(unlockWnd_slot()), 0,
                                 BUTTON_POPUP_VIEW_UNLOCK);
         menuBar()->insertItem(i18n("&View"), viewPopup);
 // "options" popup menu
         optionsPopup->insertItem(QIconSet(picons->loadIcon("configure", KIcon::Small)),
-                                 i18n("&Configure..."), this,
+                                 i18n("&Configure PwM/Pi..."), this,
                  SLOT(config_slot()),0,
                                  BUTTON_POPUP_OPTIONS_CONFIG);
+        optionsPopup->insertItem(QIconSet(picons->loadIcon("configure", KIcon::Small)),
+                                 i18n("Global Settings..."), this,
+                 SLOT(config_global_slot()),0,
+                                 BUTTON_POPUP_OPTIONS_GLOBAL_CONFIG);
     if ( QApplication::desktop()->width() <= 240 ) {
         managePopup->insertSeparator();
         managePopup->insertItem(i18n("&Options"), optionsPopup);
     } else
         menuBar()->insertItem(i18n("&Options"), optionsPopup);
 // "help" popup menu
 #ifndef PWM_EMBEDDED
         helpPopup = helpMenu(QString::null, false);
 #else
         optionsPopup->insertItem(QIconSet(picons->loadIcon("configure", KIcon::Small)),
                                  i18n("C&ategories..."), this,
                  SLOT(category_slot()),0,
                                  BUTTON_POPUP_OPTIONS_CATEGORY);
 
 
         menuBar()->insertItem(i18n("&Sync"), syncPopup);
 
 
 
 
 
         helpPopup = new KPopupMenu(this);
 
 
         helpPopup->insertItem(i18n("&License"), this,
                                 SLOT(showLicense_slot()), 0,
                                 BUTTON_POPUP_HELP_LICENSE);
 
         helpPopup->insertItem(i18n("&Faq"), this,
                                 SLOT(faq_slot()), 0,
                                 BUTTON_POPUP_HELP_FAQ);
 
         helpPopup->insertItem(i18n("&About PwManager"), this,
                                 SLOT(createAboutData_slot()), 0,
                                 BUTTON_POPUP_HELP_ABOUT);
 
         helpPopup->insertItem(i18n("&Sync HowTo"), this,
                                 SLOT(syncHowTo_slot()), 0,
                                 BUTTON_POPUP_HELP_SYNC);
 
         helpPopup->insertItem(i18n("&What's New"), this,
                                 SLOT(whatsnew_slot()), 0,
                                 BUTTON_POPUP_HELP_WHATSNEW);
 
 #endif
         menuBar()->insertItem(i18n("&Help"), helpPopup);
 
 }
 
 void PwM::initToolbar()
 {
   KIconLoader* picons;
 #ifndef PWM_EMBEDDED
         KIconLoader icons;
         picons = &icons;
 #else
         picons = KGlobal::iconLoader();
 #endif
 
 #if 0
         toolBar()->insertButton(picons->loadIcon("filenew", KIcon::Toolbar),
                                 BUTTON_TOOL_NEW, SIGNAL(clicked(int)), this,
                                 SLOT(new_slot()), true, i18n("New"));
 #endif
         toolBar()->insertButton(picons->loadIcon("fileopen", KIcon::Toolbar),
                                 BUTTON_TOOL_OPEN, SIGNAL(clicked(int)), this,
                                 SLOT(open_slot()), true, i18n("Open"));
         toolBar()->insertButton(picons->loadIcon("pencil", KIcon::Toolbar),
                                 BUTTON_TOOL_ADD, SIGNAL(clicked(int)), this,
                                 SLOT(addPwd_slot()), true,
                                 i18n("Add password"));
         toolBar()->insertSeparator();
     
         toolBar()->insertButton(picons->loadIcon("find", KIcon::Toolbar),
                                 BUTTON_TOOL_FIND, SIGNAL(clicked(int)), this,
                                         SLOT(find_slot()), true, i18n("Find entry"));
         toolBar()->insertSeparator();
         toolBar()->insertButton(picons->loadIcon("filesave", KIcon::Toolbar),
                                 BUTTON_TOOL_SAVE, SIGNAL(clicked(int)), this,
                                 SLOT(save_slot()), true, i18n("Save"));
 #if 0
         toolBar()->insertButton(picons->loadIcon("filesaveas", KIcon::Toolbar),
                                 BUTTON_TOOL_SAVEAS, SIGNAL(clicked(int)), this,
                                 SLOT(saveAs_slot()), true, i18n("Save as"));
 #endif
 
 
 #if 0
         toolBar()->insertButton(picons->loadIcon("fileprint", KIcon::Toolbar),
                                 BUTTON_TOOL_PRINT, SIGNAL(clicked(int)), this,
                                 SLOT(print_slot()), true, i18n("Print..."));
 #endif
         toolBar()->insertSeparator();
         toolBar()->insertButton(picons->loadIcon("edit", KIcon::Toolbar),
                                 BUTTON_TOOL_EDIT, SIGNAL(clicked(int)), this,
                                 SLOT(editPwd_slot()), true,
                                 i18n("Edit password"));
         toolBar()->insertButton(picons->loadIcon("editdelete", KIcon::Toolbar),
                                 BUTTON_TOOL_DEL, SIGNAL(clicked(int)), this,
                                 SLOT(deletePwd_slot()), true,
                                 i18n("Delete password"));
         toolBar()->insertSeparator();
         toolBar()->insertButton(picons->loadIcon("halfencrypted", KIcon::Toolbar),
                                 BUTTON_TOOL_LOCK, SIGNAL(clicked(int)), this,
                                 SLOT(lockWnd_slot()), true,
                                 i18n("Lock all entries"));
         toolBar()->insertButton(picons->loadIcon("encrypted", KIcon::Toolbar),
                                 BUTTON_TOOL_DEEPLOCK, SIGNAL(clicked(int)), this,
                                 SLOT(deepLockWnd_slot()), true,
                                 i18n("Deep-Lock all entries"));
         toolBar()->insertButton(picons->loadIcon("decrypted", KIcon::Toolbar),
                                 BUTTON_TOOL_UNLOCK, SIGNAL(clicked(int)), this,
                                 SLOT(unlockWnd_slot()), true,
                                 i18n("Unlock all entries"));
 }
 
 void PwM::initMetrics()
 {
         QSize s = conf()->confWndMainWndSize();
         if (s.isValid())
                 resize(s);
         else
                 resize(DEFAULT_SIZE);
 }
 
 void PwM::updateCaption()
 {
     QString  s = curDoc()->getTitle();
    int maxlen = 50;
     if ( QApplication::desktop()->width() < 640 ) {
         if ( QApplication::desktop()->width() < 320 )
             maxlen = 22;
         else
             maxlen = 35;
     }
     if ( s.length() > maxlen ) {
         s = "..."+s.right(maxlen -3);
     }
         setPlainCaption( s );
 }
 
 void PwM::hideEvent(QHideEvent *)
 {
         if (isMinimized()) {
                 if (init->tray()) {
                         forceMinimizeToTray = true;
                         close();
                 }
                 int mmlock = conf()->confGlobMinimizeLock();
                 switch (mmlock) {
                         case 0:         // don't lock anything
                         break;
                         case 1: {// normal lock
                         curDoc()->lockAll(true);
                         break;
                         } case 2: {// deep-lock
                         curDoc()->deepLock();
                         break;
                 } default:
                         WARN();
                 }
         }
 }
 
 void PwM::setVirgin(bool v)
 {
         if (virgin == v)
                 return;
         virgin = v;
         filePopup->setItemEnabled(BUTTON_POPUP_FILE_SAVE, !v);
         filePopup->setItemEnabled(BUTTON_POPUP_FILE_SAVEAS, !v);
         filePopup->setItemEnabled(BUTTON_POPUP_FILE_EXPORT, !v);
         filePopup->setItemEnabled(BUTTON_POPUP_FILE_PRINT, !v);
         managePopup->setItemEnabled(BUTTON_POPUP_MANAGE_EDIT, !v);
         managePopup->setItemEnabled(BUTTON_POPUP_MANAGE_DEL, !v);
         managePopup->setItemEnabled(BUTTON_POPUP_MANAGE_CHANGEMP, !v);
         viewPopup->setItemEnabled(BUTTON_POPUP_VIEW_LOCK, !v);
         viewPopup->setItemEnabled(BUTTON_POPUP_VIEW_DEEPLOCK, !v);
         viewPopup->setItemEnabled(BUTTON_POPUP_VIEW_UNLOCK, !v);
         viewPopup->setItemEnabled(BUTTON_POPUP_VIEW_FIND, !v);
         toolBar()->setItemEnabled(BUTTON_TOOL_SAVE, !v);
         toolBar()->setItemEnabled(BUTTON_TOOL_SAVEAS, !v);
         toolBar()->setItemEnabled(BUTTON_TOOL_PRINT, !v);
         toolBar()->setItemEnabled(BUTTON_TOOL_EDIT, !v);
         toolBar()->setItemEnabled(BUTTON_TOOL_DEL, !v);
         toolBar()->setItemEnabled(BUTTON_TOOL_LOCK, !v);
         toolBar()->setItemEnabled(BUTTON_TOOL_DEEPLOCK, !v);
         toolBar()->setItemEnabled(BUTTON_TOOL_UNLOCK, !v);
         toolBar()->setItemEnabled(BUTTON_TOOL_FIND, !v);
 }
 
 void PwM::new_slot()
@@ -662,409 +667,429 @@ void PwM::addPwd_slot1(QString *pw, PwMDoc *_doc)
         doc->getCategoryList(&catList);
         unsigned i, size = catList.size();
         for (i = 0; i < size; ++i) {
                 w.addCategory(catList[i].c_str());
         }
         w.setCurrCategory(view->getCurrentCategory());
         if (pw)
                 w.pwLineEdit->setText(*pw);
 
       tryAgain:
     w.descLineEdit->setFocus();
         if (w.exec() == 1) 
           {
                 PwMDataItem d;
 
                 //US BUG: to initialize all values of curEntr with meaningfulldata,
                 // we call clear on it. Reason: Metadata will be uninitialized otherwise.
                 // another option would be to create a constructor for PwMDataItem
                 d.clear(true);
 
                 d.desc = w.getDescription().latin1();
                 d.name = w.getUsername().latin1();
                 d.pw = w.getPassword().latin1();
                 d.comment = w.getComment().latin1();
                 d.url = w.getUrl().latin1();
                 d.launcher = w.getLauncher().latin1();
                 PwMerror ret = doc->addEntry(w.getCategory(), &d);
                 if (ret == e_entryExists) {
                         KMessageBox::error(this,
                                            i18n
                                            ("An entry with this \"Description\",\n"
                                             "does already exist.\n"
                                             "Please select another description."),
                                            i18n("entry already exists."));
                         goto tryAgain;
                 } else if (ret == e_maxAllowedEntr) {
                         KMessageBox::error(this, i18n("The maximum possible number of\nentries"
                                                       "has been reached.\nYou can't add more entries."),
                                                  i18n("maximum number of entries"));
                         doc->timer()->putLock(DocTimer::id_autoLockTimer);
                         return;
                 }
         }
         setVirgin(false);
         doc->timer()->putLock(DocTimer::id_autoLockTimer);
 }
 
 //US ENH : changed code to run with older MOC
 void PwM::editPwd_slot()
 {
   editPwd_slot3(0,0,0);
 }
 
 void PwM::editPwd_slot1(const QString *category)
 {
   editPwd_slot3(category, 0, 0);
 }
 
 void PwM::editPwd_slot3(const QString *category, const int *index,
                        PwMDoc *_doc)
 {
         PwMDoc *doc;
         if (_doc) {
                 doc = _doc;
         } else {
                 doc = curDoc();
         }
         PWM_ASSERT(doc);
         if (doc->isDocEmpty())
                 return;
         if (doc->isDeepLocked())
                 return;
         doc->timer()->getLock(DocTimer::id_autoLockTimer);
         unsigned int curEntryIndex;
         if (index) {
                 curEntryIndex = *index;
         } else {
                 if (!(view->getCurEntryIndex(&curEntryIndex))) {
             qDebug("couldn't get index. Maybe we have a binary entry here. ");
                         printDebug("couldn't get index. Maybe we have a binary entry here.");
                         doc->timer()->putLock(DocTimer::id_autoLockTimer);
                         return;
                 }
         }
         QString curCategory;
         if (category) {
                 curCategory = *category;
         } else {
                 curCategory = view->getCurrentCategory();
         }
         PwMDataItem currItem;
         if (!doc->getEntry(curCategory, curEntryIndex, &currItem, true)) {
                 doc->timer()->putLock(DocTimer::id_autoLockTimer);
                 return;
         }
         BUG_ON(currItem.binary);
         AddEntryWndImpl w(doc);
     w.setCaption( i18n ("Edit password") );
         vector<string> catList;
         doc->getCategoryList(&catList);
         unsigned i, size = catList.size();
         for (i = 0; i < size; ++i) {
                 w.addCategory(catList[i].c_str());
         }
         w.setCurrCategory(curCategory);
         w.setDescription(currItem.desc.c_str());
         w.setUsername(currItem.name.c_str());
         w.setPassword(currItem.pw.c_str());
         w.setUrl(currItem.url.c_str());
         w.setLauncher(currItem.launcher.c_str());
         w.setComment(currItem.comment.c_str());
     w.descLineEdit->setFocus();
         if (w.exec() == 1) {
                 currItem.desc = w.getDescription().latin1();
                 currItem.name = w.getUsername().latin1();
                 currItem.pw = w.getPassword().latin1();
                 currItem.comment = w.getComment().latin1();
                 currItem.url = w.getUrl().latin1();
                 currItem.launcher = w.getLauncher().latin1();
                 if (!doc->editEntry(curCategory, w.getCategory(),
                                          curEntryIndex, &currItem)) {
                         KMessageBox::error(this,
                                            i18n("Couldn't edit the entry.\n"
                                                 "Maybe you changed the category and\n"
                                                 "this entry is already present\nin the new "
                                                 "category?"),
                                            i18n("couldn't edit entry."));
                         doc->timer()->putLock(DocTimer::id_autoLockTimer);
                         return;
                 }
         }
         doc->timer()->putLock(DocTimer::id_autoLockTimer);
 }
 
 void PwM::deletePwd_slot()
 {
         PWM_ASSERT(curDoc());
         if (curDoc()->isDocEmpty())
                 return;
         if (curDoc()->isDeepLocked())
                 return;
         curDoc()->timer()->getLock(DocTimer::id_autoLockTimer);
         unsigned int curEntryIndex = 0;
         if (!(view->getCurEntryIndex(&curEntryIndex))) {
                 printDebug("couldn't get index");
                 curDoc()->timer()->putLock(DocTimer::id_autoLockTimer);
                 return;
         }
 
         PwMDataItem currItem;
         QString curCategory = view->getCurrentCategory();
         if (!curDoc()->getEntry(curCategory, curEntryIndex, &currItem)) {
                 printDebug("couldn't get entry");
                 curDoc()->timer()->putLock(DocTimer::id_autoLockTimer);
                 return;
         }
         if (KMessageBox::
             questionYesNo(this,
                           i18n
                           ("Do you really want to delete\nthe selected entry") +
                           " \n\"" + QString(currItem.desc.c_str())
                           + "\" ?", i18n("delete?"))
             == KMessageBox::Yes) {
 
                 curDoc()->delEntry(curCategory, curEntryIndex);
         }
         curDoc()->timer()->putLock(DocTimer::id_autoLockTimer);
 }
 
 void PwM::changeMasterPwd_slot()
 {
         PWM_ASSERT(curDoc());
         curDoc()->changeCurrentPw();
 }
 
 void PwM::lockWnd_slot()
 {
         PWM_ASSERT(curDoc());
         curDoc()->lockAll(true);
 }
 
 void PwM::deepLockWnd_slot()
 {
         PWM_ASSERT(curDoc());
         curDoc()->deepLock();
 }
 
 void PwM::unlockWnd_slot()
 {
         PWM_ASSERT(curDoc());
         curDoc()->lockAll(false);
 }
-
+void PwM::config_global_slot()
+{
+  KPimPrefsGlobalDialog gc ( this );
+    gc.exec();
+}
 void PwM::config_slot()
 {
   int oldStyle = conf()->confWndMainViewStyle();
-#ifdef PWM_EMBEDDED  
+
+#if 0 
     KCMultiDialog*  ConfigureDialog = new KCMultiDialog( "PIM", this ,"pwmconfigdialog", true );
 
     KCMPwmConfig* pwmcfg = new KCMPwmConfig( ConfigureDialog->getNewVBoxPage(i18n( "PwManager")) , "KCMPwmConfig" );
     ConfigureDialog->addModule(pwmcfg );
 
     KCMKdePimConfig* kdelibcfg = new KCMKdePimConfig( ConfigureDialog->getNewVBoxPage(i18n( "Global")) , "KCMKdeLibConfig" );
     ConfigureDialog->addModule(kdelibcfg );
+#endif
+
 
+
+    KDialogBase * ConfigureDialog = new KDialogBase (  KDialogBase::Plain , i18n("Configure KA/Pi"), KDialogBase::Default |KDialogBase::Cancel | KDialogBase::Apply | KDialogBase::Ok, KDialogBase::Ok,0, "name", true, true);
+
+    KCMPwmConfig* kabcfg = new KCMPwmConfig( ConfigureDialog , "KCMpwmConfig" );
+    ConfigureDialog->setMainWidget( kabcfg );
+    connect( ConfigureDialog, SIGNAL( applyClicked() ),
+            kabcfg, SLOT( save() ) );
+    connect( ConfigureDialog, SIGNAL( acceptClicked() ),
+             kabcfg, SLOT( save() ) );
+    connect( ConfigureDialog, SIGNAL( defaultClicked() ),
+             kabcfg, SLOT( defaults() ) );
+    //saveSettings();
+    kabcfg->load();
 #ifndef DESKTOP_VERSION
+    if ( QApplication::desktop()->height() <= 480 )
+        ;// ConfigureDialog->hideButtons(); 
     ConfigureDialog->showMaximized();
 #endif
+
+
     if ( ConfigureDialog->exec() )
         KMessageBox::information( this,  i18n("Some changes are only\neffective after a restart!\n") );
     delete ConfigureDialog;
 
-#else //PWM_EMBEDDED
-        // display the configuration window (modal mode)
-        if (!conf()->showConfWnd(this))
-                return;
-#endif
+
 
         int newStyle = conf()->confWndMainViewStyle();
         // reinitialize tray
         init->initTray();
         // reinitialize KWallet emulation
         init->initKWalletEmu();
 
         PwMDocList *_dl = PwMDoc::getOpenDocList();
         const vector<PwMDocList::listItem> *dl = _dl->getList();
         vector<PwMDocList::listItem>::const_iterator i = dl->begin(),
                                                      end = dl->end();
         PwMDoc *doc;
         while (i != end) {
                 doc = (*i).doc;
                 // unlock-without-mpw timeout
                 doc->timer()->start(DocTimer::id_mpwTimer);
                 // auto-lock timeout
                 doc->timer()->start(DocTimer::id_autoLockTimer);
                 ++i;
         }
 
         const QValueList<PwM *> *ml = init->mainWndList();
 #ifndef PWM_EMBEDDED
         QValueList<PwM *>::const_iterator i2 = ml->begin(),
                                           end2 = ml->end();
 #else
         QValueList<PwM *>::ConstIterator i2 = ml->begin(),
                                           end2 = ml->end();
 #endif
         PwM *pwm;
         while (i2 != end2) {
                 pwm = *i2;
                 // reinitialize the window style.
                 if (oldStyle != newStyle)
                         pwm->curView()->initStyle(newStyle);
                 // set the new font
                 pwm->curView()->setFont(conf()->confGlobEntryFont());
                 ++i2;
         }
 }
 
 void PwM::activateMpButton(bool activate)
 {
         managePopup->setItemEnabled(BUTTON_POPUP_MANAGE_CHANGEMP, activate);
 }
 
 void PwM::closeEvent(QCloseEvent *e)
 {
     //qDebug("PwM::closeEvent ");
     emit closed( this );
     return;
         e->accept();
 }
 
 void PwM::docClosed(PwMDoc *doc)
 {
     //qDebug("PwM::docClosed ");
         PARAM_UNUSED(doc);
         PWM_ASSERT(doc == curDoc());
         close();
 }
 
 void PwM::find_slot()
 {
         PWM_ASSERT(curDoc());
         if (curDoc()->isDocEmpty())
                 return;
         if (curDoc()->isDeepLocked())
                 return;
         curDoc()->timer()->getLock(DocTimer::id_autoLockTimer);
         FindWndImpl findWnd(view);
         findWnd.exec();
         curDoc()->timer()->putLock(DocTimer::id_autoLockTimer);
 }
 
 void PwM::exportToText()
 {
         PWM_ASSERT(curDoc());
         if (curDoc()->isDocEmpty()) {
                 KMessageBox::information(this,
                                          i18n
                                          ("Sorry, there's nothing to export.\n"
                                           "Please first add some passwords."),
                                          i18n("nothing to do"));
                 return;
         }
         curDoc()->timer()->getLock(DocTimer::id_autoLockTimer);
         QString fn(KFileDialog::getSaveFileName(QString::null,
                                                 i18n("*|plain-text file"),
                                                 this));
         if (fn == "") {
                 curDoc()->timer()->putLock(DocTimer::id_autoLockTimer);
                 return;
         }
 
         PwMerror ret = curDoc()->exportToText(&fn);
         if (ret != e_success) {
                 KMessageBox::error(this,
                                    i18n("Error: Couldn't write to file.\n"
                                         "Please check if you have permission to write\n"
                                         "to the file in that directory."),
                                    i18n("error while writing"));
         } else
                 showStatMsg(i18n("Successfully exported data."));
         curDoc()->timer()->putLock(DocTimer::id_autoLockTimer);
 }
 
 bool PwM::importFromText()
 {
         if (!isVirgin()) {
                 if (KMessageBox::questionYesNo(this,
                                                i18n("Do you want to import the data\n"
                                                     "into the current document? (If you\n"
                                                     "select \"no\", a new document will be\n"
                                                     "opened.)"),
                                                i18n("import into this document?"))
                     == KMessageBox::No) {
                         // import the data to a new window.
                         PwM *newInstance = init->createMainWnd();
                         bool ok = newInstance->importFromText();
                         if (!ok) {
                                 newInstance->setForceQuit(true);
                                 delete_and_null(newInstance);
                         }
                         return ok;
                 }
         }
 
         curDoc()->timer()->getLock(DocTimer::id_autoLockTimer);
         PwMerror ret;
         QString path(KFileDialog::getOpenFileName(QString::null,
                                                   i18n("*|PWM-exported text file"),
                                                   this));
         if (path == "")
                 goto cancelImport;
 
         ret = curDoc()->importFromText(&path, 0);
         if (ret == e_fileFormat) {
                 KMessageBox::error(this,
                                    i18n("Could not read file-format.\n"
                                         "This seems to be _not_ a valid file\n"
                                         "exported by PwM."),
                                    i18n("invalid file-format"));
                 goto cancelImport;
         } else if (ret == e_invalidArg) {
                 BUG();
                 goto cancelImport;
         } else if (ret != e_success) {
                 KMessageBox::error(this,
                                    i18n("Could not import file!\n"
                                         "Do you have permission to read this file?\n"
                                         "Do you have enough free memory?"),
                                    i18n("import failed"));
                 goto cancelImport;
         }
         setVirgin(false);
         curDoc()->timer()->putLock(DocTimer::id_autoLockTimer);
         return true;
 
 cancelImport:
         curDoc()->timer()->putLock(DocTimer::id_autoLockTimer);
         return false;
 }
 
 void PwM::exportToGpasman()
 {
         PWM_ASSERT(curDoc());
         if (curDoc()->isDocEmpty()) {
                 KMessageBox::information(this,
                                          i18n
                                          ("Sorry, there's nothing to export.\n"
                                           "Please first add some passwords."),
                                          i18n("nothing to do"));
                 return;
         }
         curDoc()->timer()->getLock(DocTimer::id_autoLockTimer);
         QString fn(KFileDialog::getSaveFileName(QString::null,
                                                 i18n("*|Gpasman or Kpasman file"),
                                                 this));
         if (fn == "") {
                 curDoc()->timer()->putLock(DocTimer::id_autoLockTimer);
                 return;
         }
 
         PwMerror ret = curDoc()->exportToGpasman(&fn);
         if (ret != e_success) {
                 if (ret == e_noPw) {
                         curDoc()->timer()->putLock(DocTimer::id_autoLockTimer);
                         return;
                 }
                 KMessageBox::error(this,
                                    i18n("Error: Couldn't write to file.\n"
diff --git a/pwmanager/pwmanager/pwm.h b/pwmanager/pwmanager/pwm.h
index 9fa9edc..2d1b854 100644
--- a/pwmanager/pwmanager/pwm.h
+++ b/pwmanager/pwmanager/pwm.h
@@ -1,299 +1,300 @@
 /***************************************************************************
  *                                                                         *
  *   copyright (C) 2003, 2004 by Michael Buesch                            *
  *   email: mbuesch@freenet.de                                             *
  *                                                                         *
  *   This program is free software; you can redistribute it and/or modify  *
  *   it under the terms of the GNU General Public License version 2        *
  *   as published by the Free Software Foundation.                         *
  *                                                                         *
  ***************************************************************************/
 
 /***************************************************************************
  * copyright (C) 2004 by Ulf Schenk
  * This file is originaly based on version 1.0.1 of pwmanager
  * and was modified to run on embedded devices that run microkde
  *
  * $Id$
  **************************************************************************/  
 
 #ifndef __PWM_H
 #define __PWM_H
 
 
 #include <kpopupmenu.h>
 #include <klistview.h>
 #include <kmainwindow.h>
 
 #ifndef PWM_EMBEDDED
 #include <kwin.h>
 #include <kapp.h>
 #include <kdeversion.h>
 #else
 #include <ksyncmanager.h>
 #endif
 
 #include <kaction.h>
 
 #include <qglobal.h>
 
 #include "pwmview.h"
 #include "pwmexception.h"
 
 
 /** timeout for displaying a message on the status-bar (in seconds) */
         #define STATUSBAR_MSG_TIMEOUT5
 
 
 class PwMInit;
 class KSyncManager;
 
 /** PwM is the base class of the project */
 #ifndef PWM_EMBEDDED
 //MOC_SKIP_BEGIN
 class PwM : public KMainWindow
 //MOC_SKIP_END
 #else
 class PwM : public KMainWindow, public KSyncInterface
 #endif
 {
         Q_OBJECT
 public:
         friend class PwMView;
         /** construtor */
         PwM(PwMInit *_init, PwMDoc *doc,
             bool virginity = true,
             QWidget* parent = 0, const char *name = 0);
         /** destructor */
         ~PwM();
 
         /** copy some text to the global clipboard */
         static void copyToClipboard(const QString &s);
 
         /** returns pointer to the view */
         PwMView * curView()
                         { return view; }
         /** returns pointer to the currently using document. */
         PwMDoc * curDoc()
                         { return curView()->document(); }
         /** open a new doc with the given filename */
         PwMDoc * openDoc(QString filename, bool openDeepLocked = false);
         /** show a message on the global status bar.
           * The message times out after some seconds.
           */
         void showStatMsg(const QString &msg);
         /** ask the user where to save the doc (if it has not been saved, yet)
           * and write the data to disk.
           */
         bool save();
         /** ask the user where to save the doc
           * and write the data to disk.
           */
         bool saveAs();
         /** force quit. Quit this window, always! Don't minimize it */
         bool isForceQuit()
                         { return forceQuit; }
         /** set forceQuit */
         void setForceQuit(bool force)
                         { forceQuit = force; }
         /** force minimize this window */
         bool isForceMinimizeToTray()
                         { return forceMinimizeToTray; }
         /** set forceMinimizeToTray */
         void setForceMinimizeToTray(bool force)
                         { forceMinimizeToTray = force; }
 
 public slots:
         /** file/new triggered */
         void new_slot();
         /** file/open triggered */
 //US ENH
         void open_slot();
         void open_slot(QString fn);
         /** file/close triggered */
         void close_slot();
         /** file/quit triggered */
         void quitButton_slot();
         /** file/save triggered */
         void save_slot();
         /** file/saveAs triggered */
         void saveAs_slot();
         /** file/export/text triggered */
         void exportToText();
         /** file/export/gpasman triggered */
         void exportToGpasman();
         /** file/export/kwallet triggered */
         void exportToKWallet();
         /** file/export/csv triggered */
         void exportToCsv();
         /** file/import/text triggered */
         bool importFromText();
         /** file/import/gpasman triggered */
         bool importFromGpasman();
         /** file/import/kwallet triggered */
         bool importKWallet();
         /** file/import/csv triggered */
         bool importCsv();
         /** file/print triggered */
         void print_slot();
         /** manage/add triggered */
         //US ENH : changed code to run with older MOC
 
         void addPwd_slot();
         void addPwd_slot1(QString *pw, PwMDoc *_doc);
         /** manage/edit triggered */
         //US ENH : changed code to run with older MOC
         void editPwd_slot();
         void editPwd_slot1(const QString *category);
         void editPwd_slot3(const QString *category, const int *index ,PwMDoc *_doc );
 
         /** manage/delete triggered */
         void deletePwd_slot();
         /** execute the "Launcher" entry */
         void execLauncher_slot();
         /** open browser with URL entry */
         void goToURL_slot();
         /** manage/changeMasterPwd triggered */
         void changeMasterPwd_slot();
         /** lock current document */
         void lockWnd_slot();
         /** deeplock current document */
         void deepLockWnd_slot();
         /** window/unlock triggered */
         void unlockWnd_slot();
         /** find item */
         void find_slot();
         /** configure clicked */
         void config_slot();
+        void config_global_slot();
         /** (de)activate the "change master pw" button in the menu-bar */
         void activateMpButton(bool activate = true);
         /** generate a new chipcard */
         void genNewCard_slot();
         /** completely erase the current card */
         void eraseCard_slot();
         /** returns the ID number of the current card */
         void readCardId_slot();
         /** make backup image of the current card */
         void makeCardBackup_slot();
         /** write backup image to current card */
         void replayCardBackup_slot();
 
 #ifdef PWM_EMBEDDED
         void category_slot();
         void whatsnew_slot();
         void showLicense_slot();
         void faq_slot();
         void createAboutData_slot();
         void syncHowTo_slot();
 #endif
 
 protected:
         /** is this window virgin? */
         bool isVirgin()
                         { return virgin; }
         /** add/remove virginity */
         void setVirgin(bool v);
         /** initialize the menubar */
         void initMenubar();
         /** initialize the toolbar */
         void initToolbar();
         /** initialize the window-metrics */
         void initMetrics();
         /** close-event */
         void closeEvent(QCloseEvent *e);
         /** creates a new PwM-ListView and returns it */
         PwMView * makeNewListView(PwMDoc *doc);
         /** Window hide-event */
         void hideEvent(QHideEvent *);
         /** is this window minimized? */
         bool isMinimized()
                 {
 #ifndef PWM_EMBEDDED
                   #if KDE_VERSION >= KDE_MAKE_VERSION(3, 2, 0)
                         return KWin::windowInfo(winId()).isMinimized();
                   #else // KDE_VERSION
                         return KWin::info(winId()).isIconified();
                   #endif // KDE_VERSION
 #else
                         return false;
 #endif
                 }
         /** window got the focus */
         void focusInEvent(QFocusEvent *e);
         /** update the caption string */
         void updateCaption();
 #ifdef CONFIG_KWALLETIF
         /** check if kwalletemu is enabled and ask the user what to do */
         bool checkAndAskForKWalletEmu();
 #endif // CONFIG_KWALLETIF
 
 protected slots:
         /** doc got closed */
         void docClosed(PwMDoc *doc);
 
 signals:
         /** window got closed (by user or someone else) */
         void closed(PwM *wnd);
         /** window got the focus (was brought to foreground) */
         void gotFocus(PwM *wnd);
         /** window lost the focus */
         void lostFocus(PwM *wnd);
 
 protected:
         /** pointer to the view active in this KMainWindow */
         PwMView *view;
         /** pointer to the init class */
         PwMInit *init;
         /** has this window already lost its virginity?
           * Means is there an open working document
           */
         bool virgin;
         /** "file" popup-menu */
         KPopupMenu *filePopup;
 
         /** "manage" popup-menu */
         KPopupMenu *managePopup;
 #ifdef CONFIG_KEYCARD
         /** "chipcard" popup-menu */
         KPopupMenu *chipcardPopup;
 #endif // CONFIG_KEYCARD
         /** "view" popup-menu */
         KPopupMenu *viewPopup;
         /** "options" popup-menu */
         KPopupMenu *optionsPopup;
         /** "help" popup-menu */
         KPopupMenu *helpPopup;
         /** "export" popup-menu */
         KPopupMenu *exportPopup;
         /** "import" popup-menu */
         KPopupMenu *importPopup;
         /** force quit this window? */
         bool forceQuit;
         /** force minimize this window to the tray */
         bool forceMinimizeToTray;
 
 
 
 
  private:
 #ifdef PWM_EMBEDDED
     //this are the overwritten callbackmethods from the syncinterface
     virtual bool sync(KSyncManager* manager, QString filename, int mode); 
     virtual void removeSyncInfo( QString syncProfile);
 
     // LR *******************************
     // sync stuff!
     QPopupMenu *syncPopup;
     KSyncManager* syncManager;
 #endif
 
 
 
 
 
 
 
 
 };
 
 #endif