| -rw-r--r-- | bin/kdepim/kaddressbook/germantranslation.txt | 2 | ||||
| -rw-r--r-- | kabc/stdaddressbook.cpp | 5 | ||||
| -rw-r--r-- | kabc/stdaddressbook.h | 2 | ||||
| -rw-r--r-- | kaddressbook/kabcore.cpp | 28 | ||||
| -rw-r--r-- | kaddressbook/kabcore.h | 4 | ||||
| -rw-r--r-- | kaddressbook/kaddressbookmain.cpp | 4 | ||||
| -rw-r--r-- | kaddressbook/mainembedded.cpp | 5 |
7 files changed, 38 insertions, 12 deletions
diff --git a/bin/kdepim/kaddressbook/germantranslation.txt b/bin/kdepim/kaddressbook/germantranslation.txt index 293aaea..ece26d2 100644 --- a/bin/kdepim/kaddressbook/germantranslation.txt +++ b/bin/kdepim/kaddressbook/germantranslation.txt @@ -719,102 +719,102 @@ { "Warning","Warnung" },
{ "Select week number","Wähle Wochen Nummer" },
{ "Februar","Februar" },
{ "Pi-Sync options for device: ","Pi-Sync Einstellungen für Gerät: " },
{ "Password for remote access:","Passwort für fernen Zugriff:" },
{ "Remote IP address:","Ferne IP Adresse:" },
{ "Remote port number:","Ferne Port Nummer:" },
{ "Remote file saved to temp file.","Ferne Daten in temp Datei gespeichert." },
{ "Remote from: ","Fern von: " },
{ "Local from: ","Lokal von: " },
{ "Synchronization summary:\n\n %d items added to local\n %d items added to remote\n %d items updated on local\n %d items updated on remote\n %d items deleted on local\n %d items deleted on remote\n %d incoming filtered out\n %d outgoing filtered out\n","Synchronisationsübersicht:\n\n %d lokal hinzugefügt\n %d fern hinzugefügt\n %d lokal geändert\n %d fern geändert\n %d lokal gelöscht\n %d fern gelöscht\n %d eingehende ausgefiltert\n %d ausgehende ausgefiltert\n" },
{ "Local calendar changed!\n","Lokaler Kalender geändert!\n" },
{ "Write back","Schreibe zurück" },
{ "Pi-Sync succesful!","Pi-Sync erfolgreich!" },
{ "Received sync request","Sync Anfrage erhalten" },
{ "Synchronizing from remote ...\n\nDo not use this application!\n\nIf syncing fails\nyou can close this dialog.","Ferne Synchronisation ...\n\nBenutze diese Anwendung nicht!\n\nWenn das Syncen fehlschlägt kann\ndieser Dialog geschlossen werden." },
{ "Saving Data to temp file ...","Speichere Daten in temp Datei..." },
{ "Data saved to temp file!","Daten in temp Datei gespeichert!" },
{ "Sending file...","Sende Datei..." },
{ "Waiting for synced file...","Warte auf gesyncte Daten..." },
{ "Receiving synced file...","Gesyncte Daten erhalten..." },
{ "Received %1 bytes","%1 Bytes erhalten" },
{ "Writing file to disk...","Speichere Datei..." },
{ "Pi-Sync successful!","Pi-Sync erfolgreich!" },
{ "Clock skew of\nsyncing devices\nis %1 seconds!","Uhrzeitunterschied der\nsyncenden Geräte\nist %1 Sekunden!" },
{ "Synchronize!","Synchronisiere!" },
{ "High clock skew!","Großer Uhrzeitunterschied!" },
{ "ADJUST\nYOUR\nCLOCKS!","JUSTIERE\nDIE\nUHREN!" },
{ "The clocks of the syncing\ndevices have a difference\nof more than 5 minutes.\nPlease adjust your clocks.\nYou may get wrong syncing results!\nPlease confirm synchronization!","Die Uhren der syncenden Geräte\nhaben einen Unterschied von\nmehr als 5 Minuten. Bitte die\nUhrzeiten anpassen. Sie können\nfalsche Sync-Resultate erhalten!\nBitte das Syncen bestätigen!" },
{ "Change search field enable jump bar","Ändere Suchfeld um Jumpbar anzuzeigen" },
{ "Search with '*' prefix (wildcard)","Suche mit '*' Prefix (Wildcard)" },
{ "Shrink searchfield in portrait view","Verkleinere Suchfeld im Portraitmodus" },
{ "Edit new contact","Bearbeite neuen Kontakt" },
{ "Edit ","Bearbeite " },
{ "No contact changed!","Kein Kontakt verändert" },
{ "%1 contacts changed!","%1 Kontakte geändert!" },
{ "Mobile (home)","Handy (Arbeit)" },
{ "Mobile (work)","Handy (Privat)" },
{ "Def.Formatted Name","Def. Format. Name" },
{ "Colors","Farben" },
{ "Alternating background of list views","Abwechselnder Hintergrund für Listen" },
{ "Backup enabled","Backup angeschaltet" },
{ "Use standard backup dir","Standard Backupverzeichnis" },
{ "Number of Backups:","Anzahl der Backups" },
{ "Make backup every ","Mache ein Backup alle " },
{ " days"," Tage" },
{ "Creating backup ... please wait ...","Erzeuge Backup ... bitte warten ..." },
{ "Backup Failed!","Backup Problem!" },
{ "Try again now","Versuche jetzt nochmal" },
{ "Try again later","Versuche später nochmal" },
{ "Try again tomorrow","Versuche morgen nochmal" },
{ "Disable backup","Schalte Backup ab" },
{ "<b>Backup directory does not exist: </b>","<b>Backup Verzeichnis existiert nicht: </b>" },
{ "<b>The backup copy command failed!</b>","<b>Das Backup Kopierkommando is fehlgeschlagen!</b>" },
{ "Choose action","Wähle Aktion" },
{ "&Configure KA/Pi...","Konfiguriere KA/Pi..." },
{ "Global Settings...","Globale Einstellungen..." },
{ "Spouse","Ehegatte" },
{ "Notes","Notizen" },
{ "Messanger","Messanger" },
{ "Assistant","Assistent" },
{ "Manager","Manager" },
{ "Secrecy","Sichtbar" },
{ "male","männlich" },
{ "female","weiblich" },
{ "Hide!","Verbergen!" },
{ "Show!","Anzeigen!" },
{ "Details","Details" },
{ "Search:","Suche:" },
{ "Automatically sync with KDE-Desktop\nwhen receiving sync request","Synce automatisch mit KDE-Desktop\nwenn eine Sync-Anforderung kommt" },
{ "Pi-Sync Port Error","Pi-Sync Port Fehler" },
{ "<b>Enabling Pi-Sync failed!</b> Failed to bind or listen to the port %1! Is another instance already listening to that port?","<b>Anschalten von Pi-Sync fehlgeschlagen!</b> Fehler beim Ansprechen des Ports %1! Ist bereits eine andere Anwendung dabei diesen Port zu nutzen?" },
{ "No valid port number:\n%1","Keine gültige Port Nummer:\n%1" },
{ "Port number (Default: %1)\nValid range from 1 to 65535","Port Nummer (Standard: %1)\nGültiger Bereich von 1 bis 65535" },
{ "Pi-Sync Error","Pi-Sync Fehler" },
{ "Got send file request\nwith invalid password","Erhielt "sende Datei" Anfrage\nmit ungültigem Passwort" },
{ "Got receive file request\nwith invalid password","Erhielt "empfange Datei" Anfrage\nmit ungültigem Passwort" },
{ "Wrong password: Receiving remote file failed.","Falsches Passwort: Empfangen von entfernter Datei fehlgeschlagen." },
{ "Please close error dialog on remote.","Bitte schließe Fehler-Dialog am entfernten Rechner" },
{ "Unknown error on remote.","Unbekannter Fehler am entfernten Rechner" },
{ "Pi-Sync: Connected!","Pi-Sync: Verbunden!" },
{ "Receiving file from remote...","Empfange entfernte Datei..." },
{ "Sending back synced file...","Sende synchronisierte Datei zurück..." },
{ "Do you want to\nclear all sync info\nof all profiles?","Möchten Sie wirklich\ndie Sync-Info\nfür alle Profile\nlöschen?" },
{ "Do you want to\nclear the sync\ninfo of profile\n%1?\n","Möchten Sie wirklich\ndie Sync-Info für Profil\n%1?\nlöschen" },
{ "Sorry, no valid port.Syncing cancelled.","Sorry, kein gültiger Port. Syncing abgebrochen." },
{ "Remote port number:\n(May be: 1 - 65535)","Ferne Port Nummer:\n(Darf sein: 1 - 65535)" },
{ "Writing back file ...","Schreibe Datei zurück..." },
{ "Sending back file ...","Sende Datei zurück..." },
{ "Eeek, there I am ticklish!","Huch, da bin ich kitzlig!" },
{ "Save using LOCAL storage","Speichere nutze LOCAL Pfad" },
{ "...and %1 more\ncontact(s) selected","...und noch %1 Kontakte\n mehr ausgewählt" },
{ "Do you really\nwant to delete the\nsetected contact(s)?\n\n","Möchten Sie wirklich\ndie ausgewählten\nKontakte löschen?\n\n" },
{ "%1 contacts\nsuccessfully\nimported.","%1 Kontakte\nerfolgreich\nimportiert." },
{ "Import this contact?","Importiere diesen Kontakt?" },
{ "Import all!","Importiere alle!" },
-{ "","" },
+{ "Loading addressbook data ... please wait","Lade Adressbuchdaten ... bitte warten" },
{ "","" },
{ "","" },
{ "","" },
{ "","" },
{ "","" },
\ No newline at end of file diff --git a/kabc/stdaddressbook.cpp b/kabc/stdaddressbook.cpp index f17f366..a14ae20 100644 --- a/kabc/stdaddressbook.cpp +++ b/kabc/stdaddressbook.cpp @@ -20,200 +20,201 @@ /* Enhanced Version of the file for platform independent KDE tools. Copyright (c) 2004 Ulf Schenk $Id$ */ #include <qdir.h> #include "resource.h" #include <kresources/manager.h> #include <kdebug.h> #include <klocale.h> #include <kstaticdeleter.h> #include <kstandarddirs.h> #include "stdaddressbook.h" using namespace KABC; StdAddressBook *StdAddressBook::mSelf = 0; bool StdAddressBook::mAutomaticSave = false; static KStaticDeleter<StdAddressBook> addressBookDeleter; QString StdAddressBook::fileName() { return locateLocal( "data", "kabc/std.vcf" ); } QString StdAddressBook::directoryName() { return locateLocal( "data", "kabc/stdvcf" ); } void StdAddressBook::handleCrash() { StdAddressBook::self()->cleanUp(); } StdAddressBook *StdAddressBook::self() { if ( !mSelf ) { QString appdir = StdAddressBook::setTempAppDir(); // US im am not sure why I have to use the other format here?? #ifdef KAB_EMBEDDED mSelf = addressBookDeleter.setObject( new StdAddressBook ); #else //KAB_EMBEDDED addressBookDeleter.setObject( mSelf, new StdAddressBook ); #endif //KAB_EMBEDDED KStandardDirs::setAppDir( appdir ); } return mSelf; } QString StdAddressBook::setTempAppDir() { QString appDIR = KStandardDirs::appDir(); #ifdef DESKTOP_VERSION QString appdir = QDir::homeDirPath(); if ( appdir.right(1) == "\\" || appdir.right(1) == "/" ) appdir += "kaddressbook/"; else appdir += "/kaddressbook/"; KStandardDirs::setAppDir( QDir::convertSeparators( appdir )); #else QString appdir = QDir::homeDirPath() + "/kdepim/apps/kaddressbook"; KStandardDirs::setAppDir( appdir ); #endif return appDIR; } StdAddressBook *StdAddressBook::self( bool onlyFastResources ) { if ( !mSelf ) { QString appdir =StdAddressBook::setTempAppDir(); #ifdef KAB_EMBEDDED mSelf = addressBookDeleter.setObject( new StdAddressBook( onlyFastResources ) ); #else //KAB_EMBEDDED addressBookDeleter.setObject( mSelf, new StdAddressBook( onlyFastResources ) ); #endif //KAB_EMBEDDED KStandardDirs::setAppDir( appdir ); } return mSelf; } StdAddressBook::StdAddressBook() : AddressBook( "kabcrc" ) { - init( false ); + //init( false ); } StdAddressBook::StdAddressBook( bool onlyFastResources ) : AddressBook( "kabcrc" ) { - init( onlyFastResources ); + if ( onlyFastResources ) + init( onlyFastResources ); } StdAddressBook::~StdAddressBook() { if ( mAutomaticSave ) save(); } void StdAddressBook::init( bool ) { KRES::Manager<Resource> *manager = resourceManager(); KRES::Manager<Resource>::ActiveIterator it; for ( it = manager->activeBegin(); it != manager->activeEnd(); ++it ) { (*it)->setAddressBook( this ); if ( !(*it)->open() ) error( QString( "Unable to open resource '%1'!" ).arg( (*it)->resourceName() ) ); } Resource *res = standardResource(); if ( !res ) { res = manager->createResource( "file" ); if ( res ) { addResource( res ); } else qDebug(" No resource available!!!"); } setStandardResource( res ); manager->writeConfig(); load(); } bool StdAddressBook::save() { kdDebug(5700) << "StdAddressBook::save()" << endl; bool ok = true; AddressBook *ab = self(); ab->deleteRemovedAddressees(); Iterator ait; for ( ait = ab->begin(); ait != ab->end(); ++ait ) { if ( !(*ait).IDStr().isEmpty() ) { (*ait).insertCustom( "KADDRESSBOOK", "X-ExternalID", (*ait).IDStr() ); } } KRES::Manager<Resource>::ActiveIterator it; KRES::Manager<Resource> *manager = ab->resourceManager(); for ( it = manager->activeBegin(); it != manager->activeEnd(); ++it ) { if ( !(*it)->readOnly() && (*it)->isOpen() ) { Ticket *ticket = ab->requestSaveTicket( *it ); // qDebug("StdAddressBook::save '%s'", (*it)->resourceName().latin1() ); if ( !ticket ) { ab->error( i18n( "Unable to save to resource '%1'. It is locked." ) .arg( (*it)->resourceName() ) ); return false; } if ( !ab->save( ticket ) ) ok = false; } } return ok; } void StdAddressBook::close() { //US destructObject is not defined on my system???. Is setObject(0) the same ??? //US addressBookDeleter.destructObject(); addressBookDeleter.setObject(0); } void StdAddressBook::setAutomaticSave( bool enable ) { mAutomaticSave = enable; } bool StdAddressBook::automaticSave() { return mAutomaticSave; } // should get const for 4.X Addressee StdAddressBook::whoAmI() { //US KConfig config( "kabcrc" ); KConfig config( locateLocal("config", "kabcrc") ); config.setGroup( "General" ); return findByUid( config.readEntry( "WhoAmI" ) ); diff --git a/kabc/stdaddressbook.h b/kabc/stdaddressbook.h index 9ec53b0..cf130b3 100644 --- a/kabc/stdaddressbook.h +++ b/kabc/stdaddressbook.h @@ -41,111 +41,111 @@ namespace KABC { It's implemented as a singleton. Use @ref self() to get the address book object. On the first self() call the address book also gets loaded. Example: <pre> KABC::AddressBook *ab = KABC::StdAddressBook::self(); KABC::AddressBook::Iterator it; for ( it = ab->begin(); it != ab->end(); ++it ) { kdDebug() << "UID=" << (*it).uid() << endl; // do some other stuff } KABC::StdAddressBook::save(); </pre> */ class StdAddressBook : public AddressBook { public: /** Destructor. */ ~StdAddressBook(); /** Return the standard addressbook object. It also loads slow resources. It is the same as self(false); . */ static StdAddressBook *self(); /** This is the same as above, but with specified behaviour of resource loading. @param onlyFastResource Only resources marked as 'fast' should be loaded */ // FIXME for KDE4 return StdAddressBook and merge with the metod above -zecke static StdAddressBook *self( bool onlyFastResources ); /** Save the standard address book to disk. */ static bool save(); /** Call this method in your crash handler to allow the library clean up possible locks. */ static void handleCrash(); /** Returns the default file name for vcard-based addressbook */ static QString fileName(); /** Returns the default directory name for vcard-based addressbook */ static QString directoryName(); /** Set the automatic save property of the address book. If @p enable is TRUE (default) the address book is saved at destruction time otherwise you have to call @ref save() to explicitely save it. */ static void setAutomaticSave( bool enable ); /** Closes the address book. Depending on @ref automaticSave() it will save the address book first. */ static void close(); /** Returns whether the address book is saved at destruction time. See also @ref setAutomaticSave(). */ static bool automaticSave(); /** Returns the contact, that is associated with the owner of the address book. This contact should be used by other programs to access user specific data. */ Addressee whoAmI(); /** Sets the users contact. See @ref whoAmI() for more information. @param uid The uid of the users contact. */ void setWhoAmI( const Addressee &addr ); + void init( bool onlyFastResources ); protected: StdAddressBook(); StdAddressBook( bool onlyFastResources ); - void init( bool onlyFastResources ); private: static QString setTempAppDir(); static StdAddressBook *mSelf; static bool mAutomaticSave; }; } #endif diff --git a/kaddressbook/kabcore.cpp b/kaddressbook/kabcore.cpp index b9830b1..c670b1f 100644 --- a/kaddressbook/kabcore.cpp +++ b/kaddressbook/kabcore.cpp @@ -310,195 +310,218 @@ KABCore::KABCore( KXMLGUIClient *client, bool readWrite, QWidget *parent, const mAddressBook->setErrorHandler( new KABC::GUIErrorHandler ); #endif //KAB_EMBEDDED connect( mAddressBook, SIGNAL( addressBookChanged( AddressBook * ) ), SLOT( addressBookChanged() ) ); #if 0 // LR moved to addressbook init method mAddressBook->addCustomField( i18n( "Department" ), KABC::Field::Organization, "X-Department", "KADDRESSBOOK" ); mAddressBook->addCustomField( i18n( "Profession" ), KABC::Field::Organization, "X-Profession", "KADDRESSBOOK" ); mAddressBook->addCustomField( i18n( "Assistant's Name" ), KABC::Field::Organization, "X-AssistantsName", "KADDRESSBOOK" ); mAddressBook->addCustomField( i18n( "Manager's Name" ), KABC::Field::Organization, "X-ManagersName", "KADDRESSBOOK" ); mAddressBook->addCustomField( i18n( "Spouse's Name" ), KABC::Field::Personal, "X-SpousesName", "KADDRESSBOOK" ); mAddressBook->addCustomField( i18n( "Office" ), KABC::Field::Personal, "X-Office", "KADDRESSBOOK" ); mAddressBook->addCustomField( i18n( "IM Address" ), KABC::Field::Personal, "X-IMAddress", "KADDRESSBOOK" ); mAddressBook->addCustomField( i18n( "Anniversary" ), KABC::Field::Personal, "X-Anniversary", "KADDRESSBOOK" ); //US added this field to become compatible with Opie/qtopia addressbook // values can be "female" or "male" or "". An empty field represents undefined. mAddressBook->addCustomField( i18n( "Gender" ), KABC::Field::Personal, "X-Gender", "KADDRESSBOOK" ); mAddressBook->addCustomField( i18n( "Children" ), KABC::Field::Personal, "X-Children", "KADDRESSBOOK" ); mAddressBook->addCustomField( i18n( "FreeBusyUrl" ), KABC::Field::Personal, "X-FreeBusyUrl", "KADDRESSBOOK" ); #endif initGUI(); mIncSearchWidget->setFocus(); connect( mViewManager, SIGNAL( selected( const QString& ) ), SLOT( setContactSelected( const QString& ) ) ); connect( mViewManager, SIGNAL( executed( const QString& ) ), SLOT( executeContact( const QString& ) ) ); connect( mViewManager, SIGNAL( deleteRequest( ) ), SLOT( deleteContacts( ) ) ); connect( mViewManager, SIGNAL( modified() ), SLOT( setModified() ) ); connect( mExtensionManager, SIGNAL( modified( const KABC::Addressee::List& ) ), this, SLOT( extensionModified( const KABC::Addressee::List& ) ) ); connect( mExtensionManager, SIGNAL( changedActiveExtension( int ) ), this, SLOT( extensionChanged( int ) ) ); connect( mXXPortManager, SIGNAL( modified() ), SLOT( setModified() ) ); connect( mJumpButtonBar, SIGNAL( jumpToLetter( const QString& ) ), SLOT( incrementalSearchJump( const QString& ) ) ); connect( mIncSearchWidget, SIGNAL( fieldChanged() ), mJumpButtonBar, SLOT( recreateButtons() ) ); connect( mDetails, SIGNAL( sendEmail( const QString& ) ), SLOT( sendMail( const QString& ) ) ); connect( ExternalAppHandler::instance(), SIGNAL (requestForNameEmailUidList(const QString&, const QString&)),this, SLOT(requestForNameEmailUidList(const QString&, const QString&))); connect( ExternalAppHandler::instance(), SIGNAL (requestForDetails(const QString&, const QString&, const QString&, const QString&, const QString&)),this, SLOT(requestForDetails(const QString&, const QString&, const QString&, const QString&, const QString&))); connect( ExternalAppHandler::instance(), SIGNAL (requestForBirthdayList(const QString&, const QString&)),this, SLOT(requestForBirthdayList(const QString&, const QString&))); connect( ExternalAppHandler::instance(), SIGNAL (nextView()),this, SLOT(setDetailsToggle())); connect( ExternalAppHandler::instance(), SIGNAL (doRingSync()),this, SLOT( doRingSync())); connect( ExternalAppHandler::instance(), SIGNAL (callContactdialog()),this, SLOT(callContactdialog())); #ifndef KAB_EMBEDDED connect( mViewManager, SIGNAL( urlDropped( const KURL& ) ), mXXPortManager, SLOT( importVCard( const KURL& ) ) ); connect( mDetails, SIGNAL( browse( const QString& ) ), SLOT( browse( const QString& ) ) ); mAddressBookService = new KAddressBookService( this ); #endif //KAB_EMBEDDED mMessageTimer = new QTimer( this ); connect( mMessageTimer, SIGNAL( timeout() ), this, SLOT( setCaptionBack() ) ); mEditorDialog = 0; createAddresseeEditorDialog( this ); setModified( false ); mBRdisabled = false; #ifndef DESKTOP_VERSION infrared = 0; #endif //toggleBeamReceive( ); mMainWindow->toolBar()->show(); // we have a toolbar repainting error on the Zaurus when starting KA/Pi - QTimer::singleShot( 10, this , SLOT ( updateToolBar())); + //QTimer::singleShot( 10, this , SLOT ( updateToolBar())); + QTimer::singleShot( 100, this, SLOT ( loadDataAfterStart() )); +} +void KABCore::receiveStart( const QCString& cmsg, const QByteArray& data ) +{ + qDebug("KO: QCOP start message received: %s ", cmsg.data() ); + mCStringMess = cmsg; + mByteData = data; } +void KABCore::loadDataAfterStart() +{ + qDebug("KABCore::loadDataAfterStart() "); + ((StdAddressBook*)mAddressBook)->init( true ); + mViewManager->refreshView(); + +#ifndef DESKTOP_VERSION + disconnect(qApp, SIGNAL (appMessage ( const QCString &, const QByteArray & )), this, SLOT (receiveStart ( const QCString &, const QByteArray & ))); + + QObject::connect(qApp, SIGNAL (appMessage ( const QCString &, const QByteArray & )), ExternalAppHandler::instance(), SLOT (appMessage ( const QCString &, const QByteArray & ))); + if ( !mCStringMess.isEmpty() ) + ExternalAppHandler::instance()->appMessage( mCStringMess, mByteData ); +#endif + QTimer::singleShot( 10, this , SLOT ( updateToolBar())); + setCaptionBack(); +} void KABCore::updateToolBar() { static int iii = 0; ++iii; mMainWindow->toolBar()->repaintMe(); if ( iii < 4 ) QTimer::singleShot( 100*iii, this , SLOT ( updateToolBar())); } KABCore::~KABCore() { // save(); //saveSettings(); //KABPrefs::instance()->writeConfig(); delete AddresseeConfig::instance(); mAddressBook = 0; KABC::StdAddressBook::close(); delete syncManager; #ifndef DESKTOP_VERSION if ( infrared ) delete infrared; #endif } void KABCore::receive( const QCString& cmsg, const QByteArray& data ) { //qDebug("KA: QCOP message received: %s ", cmsg.data() ); if ( cmsg == "setDocument(QString)" ) { QDataStream stream( data, IO_ReadOnly ); QString fileName; stream >> fileName; recieve( fileName ); return; } } void KABCore::toggleBeamReceive( ) { if ( mBRdisabled ) return; #ifndef DESKTOP_VERSION if ( infrared ) { qDebug("KA: AB disable BeamReceive "); delete infrared; infrared = 0; mActionBR->setChecked(false); return; } qDebug("KA: AB enable BeamReceive "); mActionBR->setChecked(true); infrared = new QCopChannel("QPE/Application/addressbook",this, "channelAB" ) ; QObject::connect( infrared, SIGNAL (received ( const QCString &, const QByteArray & )),this, SLOT(receive( const QCString&, const QByteArray& ))); #endif } void KABCore::disableBR(bool b) { #ifndef DESKTOP_VERSION if ( b ) { if ( infrared ) { toggleBeamReceive( ); } mBRdisabled = true; } else { if ( mBRdisabled ) { mBRdisabled = false; //toggleBeamReceive( ); } } #endif } void KABCore::recieve( QString fn ) { //qDebug("KABCore::recieve "); int count = mAddressBook->importFromFile( fn, true ); if ( count ) setModified( true ); mViewManager->refreshView(); message(i18n("%1 contact(s) received!").arg( count )); topLevelWidget()->showMaximized(); topLevelWidget()->raise(); } void KABCore::restoreSettings() { mMultipleViewsAtOnce = KABPrefs::instance()->mMultipleViewsAtOnce; bool state; if (mMultipleViewsAtOnce) state = KABPrefs::instance()->mDetailsPageVisible; else state = false; mActionDetails->setChecked( state ); setDetailsVisible( state ); @@ -2352,245 +2375,242 @@ void KABCore::addActionsManually() #endif //KAB_EMBEDDED mActionExport2phone->plug( ExportMenu ); connect ( syncMenu, SIGNAL( activated ( int ) ), syncManager, SLOT (slotSyncMenu( int ) ) ); syncManager->fillSyncMenu(); } void KABCore::showLicence() { KApplication::showLicence(); } void KABCore::manageCategories( ) { KABCatPrefs* cp = new KABCatPrefs(); cp->show(); int w =cp->sizeHint().width() ; int h = cp->sizeHint().height() ; int dw = QApplication::desktop()->width(); int dh = QApplication::desktop()->height(); cp->setGeometry( (dw-w)/2, (dh - h )/2 ,w,h ); if ( !cp->exec() ) { delete cp; return; } int count = 0; int cc = 0; message( i18n("Please wait, processing categories...")); if ( cp->addCat() ) { KABC::AddressBook::Iterator it; QStringList catList = KABPrefs::instance()->mCustomCategories; for( it = mAddressBook->begin(); it != mAddressBook->end(); ++it ) { ++cc; if ( cc %10 == 0) message(i18n("Processing contact #%1").arg(cc)); QStringList catIncList = (*it).categories(); int i; for( i = 0; i< catIncList.count(); ++i ) { if ( !catList.contains (catIncList[i])) { catList.append( catIncList[i] ); //qDebug("add cat %s ", catIncList[i].latin1()); ++count; } } } catList.sort(); KABPrefs::instance()->mCustomCategories = catList; KABPrefs::instance()->writeConfig(); message(QString::number( count )+ i18n(" categories added to list! ")); } else { QStringList catList = KABPrefs::instance()->mCustomCategories; QStringList catIncList; QStringList newCatList; KABC::AddressBook::Iterator it; for( it = mAddressBook->begin(); it != mAddressBook->end(); ++it ) { ++cc; if ( cc %10 == 0) message(i18n("Processing contact #%1").arg(cc)); QStringList catIncList = (*it).categories(); int i; if ( catIncList.count() ) { newCatList.clear(); for( i = 0; i< catIncList.count(); ++i ) { if ( catList.contains (catIncList[i])) { newCatList.append( catIncList[i] ); } } newCatList.sort(); (*it).setCategories( newCatList ); mAddressBook->insertAddressee( (*it) ); } } setModified( true ); mViewManager->refreshView(); message( i18n("Removing categories done!")); } delete cp; } void KABCore::removeVoice() { if ( KMessageBox::questionYesNo( this, i18n("After importing, phone numbers\nmay have two or more types.\n(E.g. work+voice)\nThese numbers are shown as \"other\".\nClick Yes to remove the voice type\nfrom numbers with more than one type.\n\nRemove voice type?") ) == KMessageBox::No ) return; XXPortSelectDialog dlg( this, false, this ); if ( !dlg.exec() ) return; mAddressBook->setUntagged(); dlg.tagSelected(); message(i18n("Removing voice..."), false ); KABC::AddressBook::Iterator it; for ( it = mAddressBook->begin(); it != mAddressBook->end(); ++it ) { if ( (*it).tagged() ) { (*it).removeVoice(); } } message(i18n("Refreshing view...") ); - qApp->processEvents(); mViewManager->refreshView( "" ); Addressee add; mDetails->setAddressee( add ); message(i18n("Remove voice completed!") ); } void KABCore::setFormattedName() { KABFormatPrefs setpref; if ( !setpref.exec() ) { return; } XXPortSelectDialog dlg( this, false, this ); if ( !dlg.exec() ) return; mAddressBook->setUntagged(); dlg.tagSelected(); int count = 0; KABC::AddressBook::Iterator it; bool modified = false; for ( it = mAddressBook->begin(); it != mAddressBook->end(); ++it ) { if ( (*it).tagged() ) { if ( (*it).uid().left( 2 ) == "la" ) if ( (*it).uid().left( 19 ) == QString("last-syncAddressee-") ) continue; ++count; if ( count %10 == 0 ) message(i18n("Changing contact #%1").arg( count ) ); - qApp->processEvents(); QString fName; if ( setpref.simple->isChecked() ) fName = NameEditDialog::formattedName( (*it), NameEditDialog::SimpleName ); else if ( setpref.full->isChecked() ) fName = NameEditDialog::formattedName( (*it), NameEditDialog::FullName ); else if ( setpref.reverse->isChecked() ) fName = NameEditDialog::formattedName( (*it), NameEditDialog::ReverseName ); else fName = (*it).organization(); if ( setpref.setCompany->isChecked() ) if ( fName.isEmpty() || fName =="," ) fName = (*it).organization(); (*it).setFormattedName( fName ); (*it).setChanged( true ); modified = true; (*it).setRevision( QDateTime::currentDateTime() ); } } message(i18n("Refreshing view...") ); - qApp->processEvents(); if ( modified ) setModified( true ); Addressee add; mDetails->setAddressee( add ); if ( count == 0 ) message(i18n("No contact changed!") ); else message(i18n("%1 contacts changed!").arg( count ) ); } void KABCore::clipboardDataChanged() { if ( mReadWrite ) mActionPaste->setEnabled( !QApplication::clipboard()->text().isEmpty() ); } void KABCore::updateActionMenu() { UndoStack *undo = UndoStack::instance(); RedoStack *redo = RedoStack::instance(); if ( undo->isEmpty() ) mActionUndo->setText( i18n( "Undo" ) ); else mActionUndo->setText( i18n( "Undo %1" ).arg( undo->top()->name() ) ); mActionUndo->setEnabled( !undo->isEmpty() ); if ( !redo->top() ) mActionRedo->setText( i18n( "Redo" ) ); else mActionRedo->setText( i18n( "Redo %1" ).arg( redo->top()->name() ) ); mActionRedo->setEnabled( !redo->isEmpty() ); } void KABCore::configureKeyBindings() { #ifndef KAB_EMBEDDED KKeyDialog::configure( actionCollection(), true ); #else //KAB_EMBEDDED qDebug("KABCore::configureKeyBindings() not implemented"); #endif //KAB_EMBEDDED } #ifdef KAB_EMBEDDED void KABCore::configureResources() { KRES::KCMKResources dlg( this, "" , 0 ); if ( !dlg.exec() ) return; KMessageBox::information( this, i18n("Please restart to get the \nchanged resources (re)loaded!\n") ); } #endif //KAB_EMBEDDED /* this method will be called through the QCop interface from Ko/Pi to select addresses * for the attendees list of an event. */ void KABCore::requestForNameEmailUidList(const QString& sourceChannel, const QString& uid) { qDebug("KABCore::requestForNameEmailUidList "); bool ok = false; mEmailSourceChannel = sourceChannel; mEmailSourceUID = uid; QTimer::singleShot( 10,this, SLOT ( callContactdialog() ) ); //callContactdialog(); #if 0 int wid = uid.toInt( &ok ); qDebug("UID %s ", uid.latin1()); if ( ok ) { if ( wid != QApplication::desktop()->width() ) { qDebug("KA/Pi: Request from different desktop geometry. Resizing ..."); message( i18n("Resizing, please wait...") ); mMainWindow->showMinimized(); /* { QCopEnvelope e("QPE/Application/kapi", "callContactdialog()"); } */ QTimer::singleShot( 1,this, SLOT ( resizeAndCallContactdialog() ) ); return; } } else { qDebug("KABCore::requestForNameEmailUidList:: Got invalid uid "); } callContactdialog(); //QCopEnvelope e("QPE/Application/kapi", "callContactdialog()"); #endif } void KABCore::resizeAndCallContactdialog() { diff --git a/kaddressbook/kabcore.h b/kaddressbook/kabcore.h index ceeeda7..42b7709 100644 --- a/kaddressbook/kabcore.h +++ b/kaddressbook/kabcore.h @@ -261,230 +261,234 @@ class KABCore : public QWidget, public KSyncInterface */ void setModified(); /** Marks the address book as modified without refreshing the view. */ void setModifiedWOrefresh(); /** Marks the address book as modified concerning the argument. */ void setModified( bool modified ); /** Returns whether the address book is modified. */ bool modified() const; /** Called whenever an contact is modified in the contact editor dialog or the quick edit. */ void contactModified( const KABC::Addressee &addr ); void addrModified( const KABC::Addressee &addr, bool updateDetails = true ); /** DCOP METHODS. */ void addEmail( QString addr ); void importVCard( const KURL& url, bool showPreview ); void importVCard( const QString& vCard, bool showPreview ); void newContact(); QString getNameByPhone( const QString& phone ); /** END DCOP METHODS */ /** Saves the contents of the AddressBook back to disk. */ void save(); /** Undos the last command using the undo stack. */ void undo(); /** Redos the last command that was undone, using the redo stack. */ void redo(); /** Shows the edit dialog for the given uid. If the uid is QString::null, the method will try to find a selected addressee in the view. */ void editContact( const QString &uid /*US = QString::null*/ ); //US added a second method without defaultparameter void editContact2(); /** Shows or edits the detail view for the given uid. If the uid is QString::null, the method will try to find a selected addressee in the view. */ void executeContact( const QString &uid /*US = QString::null*/ ); /** Launches the configuration dialog. */ void openConfigDialog(); void openConfigGlobalDialog(); /** Launches the ldap search dialog. */ void openLDAPDialog(); /** Creates a KAddressBookPrinter, which will display the print dialog and do the printing. */ void print(); /** Registers a new GUI client, so plugins can register its actions. */ void addGUIClient( KXMLGUIClient *client ); void requestForNameEmailUidList(const QString& sourceChannel, const QString& sessionuid); void requestForDetails(const QString& sourceChannel, const QString& sessionuid, const QString& name, const QString& email, const QString& uid); void requestForBirthdayList(const QString& sourceChannel, const QString& sessionuid); signals: void contactSelected( const QString &name ); void contactSelected( const QPixmap &pixmap ); public slots: + void loadDataAfterStart(); void recieve(QString cmsg ); void getFile( bool success ); void syncFileRequest(); void setDetailsVisible( bool visible ); void setDetailsToState(); void saveSettings(); private slots: void updateToolBar(); void updateMainWindow(); void receive( const QCString& cmsg, const QByteArray& data ); + void receiveStart( const QCString& cmsg, const QByteArray& data ); void toggleBeamReceive( ); void disableBR(bool); void setJumpButtonBarVisible( bool visible ); void setJumpButtonBar( bool visible ); void setCaptionBack(); void resizeAndCallContactdialog(); void callContactdialog(); void doRingSync(); void importFromOL(); void extensionModified( const KABC::Addressee::List &list ); void extensionChanged( int id ); void clipboardDataChanged(); void updateActionMenu(); void configureKeyBindings(); void removeVoice(); void setFormattedName(); #ifdef KAB_EMBEDDED void configureResources(); #endif //KAB_EMBEDDED void slotEditorDestroyed( const QString &uid ); void configurationChanged(); void addressBookChanged(); private: + QCString mCStringMess; + QByteArray mByteData; QString mEmailSourceChannel; QString mEmailSourceUID; void resizeEvent(QResizeEvent* e ); bool mBRdisabled; #ifndef DESKTOP_VERSION QCopChannel* infrared; #endif QTimer *mMessageTimer; void initGUI(); void initActions(); QString getPhoneFile(); AddresseeEditorDialog *createAddresseeEditorDialog( QWidget *parent, const char *name = 0 ); KXMLGUIClient *mGUIClient; KABC::AddressBook *mAddressBook; ViewManager *mViewManager; // QSplitter *mDetailsSplitter; KDGanttMinimizeSplitter *mExtensionBarSplitter; ViewContainer *mDetails; KDGanttMinimizeSplitter* mMiniSplitter; XXPortManager *mXXPortManager; JumpButtonBar *mJumpButtonBar; IncSearchWidget *mIncSearchWidget; ExtensionManager *mExtensionManager; KCMultiDialog *mConfigureDialog; #ifndef KAB_EMBEDDED LDAPSearchDialog *mLdapSearchDialog; #endif //KAB_EMBEDDED // QDict<AddresseeEditorDialog> mEditorDict; AddresseeEditorDialog *mEditorDialog; bool mReadWrite; bool mModified; bool mIsPart; bool mMultipleViewsAtOnce; //US file menu KAction *mActionMail; KAction *mActionBeam; KToggleAction *mActionBR; KAction *mActionExport2phone; KAction* mActionPrint; KAction* mActionPrintDetails; KAction* mActionNewContact; KAction *mActionSave; KAction *mActionEditAddressee; KAction *mActionMailVCard; KAction *mActionBeamVCard; KAction *mActionQuit; //US edit menu KAction *mActionCopy; KAction *mActionCut; KAction *mActionPaste; KAction *mActionSelectAll; KAction *mActionUndo; KAction *mActionRedo; KAction *mActionDelete; //US settings menu KAction *mActionConfigResources; KAction *mActionConfigGlobal; KAction *mActionConfigKAddressbook; KAction *mActionConfigShortcuts; KAction *mActionConfigureToolbars; KAction *mActionKeyBindings; KToggleAction *mActionJumpBar; KToggleAction *mActionDetails; KAction *mActionWhoAmI; KAction *mActionCategories; KAction *mActionEditCategories; KAction *mActionManageCategories; KAction *mActionAboutKAddressbook; KAction *mActionLicence; KAction *mActionFaq; KAction *mActionWN; KAction *mActionSyncHowto; KAction *mActionStorageHowto; KAction *mActionKdeSyncHowto; KAction *mActionMultiSyncHowto; KAction *mActionDeleteView; QPopupMenu *viewMenu; QPopupMenu *filterMenu; QPopupMenu *settingsMenu; QPopupMenu *changeMenu; QPopupMenu *beamMenu; //US QAction *mActionSave; diff --git a/kaddressbook/kaddressbookmain.cpp b/kaddressbook/kaddressbookmain.cpp index 519dc92..8fe3ee0 100644 --- a/kaddressbook/kaddressbookmain.cpp +++ b/kaddressbook/kaddressbookmain.cpp @@ -1,183 +1,185 @@ /* This file is part of KAddressbook. Copyright (c) 1999 Don Sanders <dsanders@kde.org> This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. As a special exception, permission is given to link this program with any edition of Qt, and distribute the resulting executable, without including the source code for Qt in the source distribution. */ #ifdef KAB_EMBEDDED #include "kabprefs.h" #include <kglobal.h> #include <qmessagebox.h> #include <qtoolbar.h> #include <qapplication.h> #else //KAB_EMBEDDED #include <kedittoolbar.h> #include <kkeydialog.h> #include <kmessagebox.h> #include <kstatusbar.h> #endif //KAB_EMBEDDED #include <klocale.h> #include "kabcore.h" #include "kaddressbookmain.h" #include "kactioncollection.h" #ifdef KAB_EMBEDDED KAddressBookMain::KAddressBookMain() : KMainWindow( 0, "adrressbook" ) #else //KAB_EMBEDDED //MOC_SKIP_BEGIN KAddressBookMain::KAddressBookMain() : DCOPObject( "KAddressBookIface" ), KMainWindow( 0 ) //MOC_SKIP_END #endif //KAB_EMBEDDED { setIcon(SmallIcon( "ka24" ) ); #if 0 //US for embedded systems, create the toolbar before we initiate KABCore. // KABCore will fill the toolbar with menues and icons QMainWindow::ToolBarDock tbd; tbd = Top; iconToolBar = new QToolBar( this ); addToolBar (iconToolBar , tbd ); iconToolBar->setHorizontalStretchable(true); //US iconToolBar->setWidth(300); #endif // 0 mCore = new KABCore( this, true, this ); #ifdef KAB_EMBEDDED setCaption( i18n( "KAddressbook/Pi" ) ); #else //KAB_EMBEDDED setCaption( i18n( "Address Book Browser" ) ); #endif //KAB_EMBEDDED //mCore->restoreSettings(); initActions(); setCentralWidget( mCore ); //US statusBar()->show(); #ifndef KAB_EMBEDDED setStandardToolBarMenuEnabled(true); createGUI( "kaddressbookui.rc", false ); #endif //KAB_EMBEDDED setAutoSaveSettings(); - qApp->processEvents(); mCore->restoreSettings(); +#ifndef DESKTOP_VERSION + QObject::connect(qApp, SIGNAL (appMessage ( const QCString &, const QByteArray & )), mCore, SLOT (receiveStart ( const QCString &, const QByteArray & ))); +#endif } KAddressBookMain::~KAddressBookMain() { // mCore->saveSettings(); } void KAddressBookMain::showMinimized () { QWidget::showMinimized () ; } void KAddressBookMain::addEmail( QString addr ) { mCore->addEmail( addr ); } #ifndef KAB_EMBEDDED ASYNC KAddressBookMain::showContactEditor( QString uid ) { mCore->editContact( uid ); } #endif //KAB_EMBEDDED void KAddressBookMain::newContact() { mCore->newContact(); } QString KAddressBookMain::getNameByPhone( QString phone ) { return mCore->getNameByPhone( phone ); } void KAddressBookMain::save() { mCore->save(); } void KAddressBookMain::exit() { close( ); } void KAddressBookMain::saveProperties( KConfig* ) { } void KAddressBookMain::readProperties( KConfig* ) { } void KAddressBookMain::initActions() { #ifndef KAB_EMBEDDED KStdAction::quit( this, SLOT( close() ), actionCollection() ); KStdAction::configureToolbars( this, SLOT( configureToolbars() ), actionCollection() ); #else //KAB_EMBEDDED //US: transfered the setup of the actions into KABCore #endif //KAB_EMBEDDED } //US new method to setup menues and toolbars on embedded systems #ifdef KAB_EMBEDDED /* QToolBar * KAddressBookMain::getIconToolBar() { return iconToolBar; } */ void KAddressBookMain::createGUI() { } #endif //KAB_EMBEDDED void KAddressBookMain::configureToolbars() { #ifndef KAB_EMBEDDED saveMainWindowSettings( KGlobal::config(), "MainWindow" ); KEditToolbar dlg( factory() ); connect( &dlg, SIGNAL( newToolbarConfig() ), SLOT( slotNewToolbarConfig() ) ); dlg.exec(); #else //KAB_EMBEDDED qDebug("KAddressBookMain::configureToolbars() not implemented by ulf" ); #endif //KAB_EMBEDDED } void KAddressBookMain::slotNewToolbarConfig() { #ifndef KAB_EMBEDDED diff --git a/kaddressbook/mainembedded.cpp b/kaddressbook/mainembedded.cpp index 93ba53c..2f3531d 100644 --- a/kaddressbook/mainembedded.cpp +++ b/kaddressbook/mainembedded.cpp @@ -1,120 +1,119 @@ #ifndef DESKTOP_VERSION #include <qpe/qpeapplication.h> #include <qcopchannel_qws.h> #include <stdlib.h> #else #include <qapplication.h> #include <qwindowsstyle.h> #include <qplatinumstyle.h> #include <qmainwindow.h> #include <qmessagebox.h> #include <stdlib.h> #endif #include <qtextcodec.h> #include <kstandarddirs.h> #include <qregexp.h> #include <kglobal.h> #include <stdio.h> #include <qdir.h> #include "kabprefs.h" #include "kaddressbookmain.h" #include "externalapphandler.h" #include <libkdepim/kpimglobalprefs.h> void dumpMissing(); int main( int argc, char **argv ) { #ifndef DESKTOP_VERSION QPEApplication a( argc, argv ); a.setKeepRunning (); #else QApplication a( argc, argv ); QApplication::setStyle( new QPlatinumStyle ()); #ifdef _WIN32_ QString hdir ( getenv( "HOME") ); if ( hdir.isEmpty() ) { QString hd ("C:/" ); //QMessageBox::information(0,"hh",QDir::homeDirPath()+" xx" +hd ); if ( QDir::homeDirPath().lower() == hd.lower() ) { _putenv( "HOME=C:"); //QMessageBox::information(0,"hh",QString ( getenv( "HOME") ) ); } } else { QDir app_dir; if ( !app_dir.exists(hdir) ) app_dir.mkdir (hdir); } #endif #endif bool exitHelp = false; if ( argc > 1 ) { QString command = argv[1]; if ( command == "-help" ){ printf("KA/E command line commands:\n"); printf(" no command: Start KA/E in usual way\n"); printf(" -help: This output\n"); printf(" KA/E is exiting now. Bye!\n"); exitHelp = true; } } if ( ! exitHelp ) { KGlobal::setAppName( "kaddressbook" ); #ifndef DESKTOP_VERSION if ( QApplication::desktop()->width() > 320 ) KGlobal::iconLoader()->setIconPath(QString(getenv("QPEDIR"))+"/pics/kdepim/kaddressbook/icons22/"); else KGlobal::iconLoader()->setIconPath(QString(getenv("QPEDIR"))+"/pics/kdepim/kaddressbook/icons16/"); #else QString fileName ; fileName = qApp->applicationDirPath () + "/kdepim/kaddressbook/icons22/"; KGlobal::iconLoader()->setIconPath(QDir::convertSeparators(fileName)); QApplication::addLibraryPath ( qApp->applicationDirPath () ); #endif KStandardDirs::setAppDir( QDir::convertSeparators(locateLocal("data", "kaddressbook"))); // init language KPimGlobalPrefs::instance()->setGlobalConfig(); QApplication::setFont( KPimGlobalPrefs::instance()->mApplicationFont ); KAddressBookMain m ; //US MainWindow m; -#ifndef DESKTOP_VERSION - QObject::connect(&a, SIGNAL (appMessage ( const QCString &, const QByteArray & )), ExternalAppHandler::instance(), SLOT (appMessage ( const QCString &, const QByteArray & ))); -#endif + #ifndef DESKTOP_VERSION a.showMainWidget( &m ); #else a.setMainWidget( &m ); m.show(); #endif + m.setCaption(i18n("Loading addressbook data ... please wait" )); a.exec(); #ifdef DESKTOP_VERSION KConfig *config = KABPrefs::instance()->getConfig(); config->setGroup("WidgetLayout"); QStringList list ;//= config->readListEntry("MainLayout"); int x,y,w,h; QWidget* wid; wid = &m; x = wid->geometry().x(); y = wid->geometry().y(); w = wid->width(); h = wid->height(); list.clear(); list << QString::number( x ); list << QString::number( y ); list << QString::number( w ); list << QString::number( h ); config->writeEntry("MainLayout",list ); config->sync(); #endif dumpMissing(); KPimGlobalPrefs::instance()->writeConfig(); } qDebug("KA: Bye! "); } |