1 files changed, 1 insertions, 1 deletions

diff --git a/bin/kdepim/korganizer/howtoSYNC.txt b/bin/kdepim/korganizer/howtoSYNC.txt
index c4e80f5..3cab446 100644
--- a/bin/kdepim/korganizer/howtoSYNC.txt
+++ b/bin/kdepim/korganizer/howtoSYNC.txt
@@ -263,97 +263,97 @@ b) Pi-Sync (direct Kx/Pi to Kx/Pi sync)
      If you specify a port number, which is already in use,
      you will get an error message when closing this dialog.
    - Choose a password.
    - Click OK.
      Now KO/Pi will send the calendar data via the network, 
      if some other device is sending a "please send calendar"
      request on the given port using the given password.
      If you want to be sure, nobody can access your calendar
      data, simply disable the file transfer feature on the 
      remote device after the syncing is done by choosing:
      Menu Synchronize-Disable Pi-Sync.
 
    Note: If you want to sync with a remote device that gets different 
          IPaddresses each time connected to the network
          (this may be the case, if you use DHCP for connection 
          of the remote device to the network) simply enable
          "Ask for preferences before sync".  
          Then you will be asked to confirm the
          "Pi-Sync" specific settings 
          (Password,IP address, port number)
          and you can easily change the IP address before each sync.
 
    On your local device, create a new profile and choose
    profile kind "Pi-Sync".
    Fill in the needed values:
    - Password for remote access:
      The password you specified on the remote device.
    - Remote IP address:
      The IP address of the remote device.
    - Remote port number:
      The port number you specified on the remote device.
    
    Now you can syncronize your local device easily with your 
    remote device. This works well for all platforms KO/Pi is 
    running on, e.g. syncing a KO/Pi on Zaurus with KO/Pi on Windows
    is now very easy.  
 
 c) Remote file
    Syncing with the profile kind "Remote file" is performed in three steps:
    i) download the remote file to your local machine to a temp file
    ii) sync with this temp file
    iii) upload the synced file to the remote device
 
    The down-/uploading if i) and iii) is done via a command line command.
    Please specify the download/upload command ( like scp, ftp, ...) and the
    file name of the temp file in the corresponding fields.  
 
 d) Mobile device (cell phone)
-   Note: On the Zaurus you have to install the kammu_xxx_arm.ipk package
+   Note: On the Zaurus you have to install the phoneaccess_xxx_arm.ipk package
          to be able to access mobile phones.
    We mention here only KO/Pi, but the same is valid for KA/Pi.
    Note:
    It is only possible to sync a mobile phone with one particular device
    running KO/Pi. If you want to be able to write data of more than one device
    to the mobile phone (e.g. from your Zaurus and from your Windows Laptop)
    do not sync with the mobile phone at all, but use the 
    "Export to phone" functionality from the different devices.
    Using "Export to phone" makes it not possible to get back data from the
    phone, if it was changed there, of course.
    If you sync with the phone, do not use "Export to phone" from any device.
    (And do not sync, as mentioned above, from any other device with that phone). 
    It would delete the needed information for syncing with that phone!
 
    We are using Gammu (Version: 0.98.9) ( http://freshmeat.net/projects/gammu/ ) 
    for accessing the phones. 
    Note: You cannot use the original Gammu for syncing KDE-Pim/Pi, because 
    we have modified the original version to make it useable for syncing!
    Gammu allows access to many phones in many ways (Irda, Bluetooth, serial,...).
    The recommended phone access using Gammu with KDE-Pim/Pi is Irda (infrared).
    Bluetooth access is disabled on the Zaurus, but may work on Windows.
    Please look at the Gammu homepage and documentation about more details 
    configuring Gammu how to access your phone.
    If you have problems accessing your phone, start KO/Pi from the konsole
    and you will get a more detailed output what went wrong.
    About Gammu from the Gammu homepage:
        Gammu (formerly known as MyGnokii2) is a cellular 
        manager for various mobile phones/modems. 
        It supports the Nokia 2100, 3100, 32xx, 33xx, 
        3410, 35xx, 51xx, 5210, 5510, 61xx, 62xx,
        63xx, 6510, 6610, 6800, 71xx, 7210, 7250, 
        7250i, 82xx, 83xx, 8910, 9110, 9210 
        and compatible and AT devices (Siemens, Alcatel, 
        Falcom, WaveCom, IPAQ, Samsung, SE, and others) 
        over cables/infrared/BlueTooth.
    
    Here is an example what to specify to access a Nokia 6310i via infrared:
    On Linux (Zaurus):
      I/O device: /dev/ircomm
      Connection: irda
      Model: <leave empty>
    
    On Windows:
      I/O device: <ignored - i.e. leave empty>
      Connection: irda
      Model: <leave empty>
 
    Here is the overview from the Gammu documentation,