From bcad4a526b3bc04a4889e6bbbe9b73731a5aacf5 Mon Sep 17 00:00:00 2001
From: ulf69 <ulf69>
Date: Fri, 22 Oct 2004 22:32:54 +0000
Subject: added references to PWM/Pi

---
(limited to 'bin/kdepim/SyncHowto.txt')

diff --git a/bin/kdepim/SyncHowto.txt b/bin/kdepim/SyncHowto.txt
index ec5513a..5874fc3 100644
--- a/bin/kdepim/SyncHowto.txt
+++ b/bin/kdepim/SyncHowto.txt
@@ -4,7 +4,7 @@ IF YOU CHANGE AN EVENT ON THE FIRST DEVICE AND SYNC IMMEDIATELY FROM
 THE OTHER DEVICE WITH THIS DEVICE, IF THE CLOCKS OF THE TWO DEVICES
 HAVE TOO MUCH DIFFERENCE.
 
-In other words: Please make shure, that the clocks of the devices 
+In other words: Please make sure, that the clocks of the devices 
 you want to sync have only a difference of some seconds!
 
 
@@ -23,28 +23,29 @@ CONTENT:
 
 Note:
 The recommended and easiest way to syncronize two devices where 
-KO/Pi or KA/Pi is installed, is the profile kind "Pi-Sync".
+KO/Pi, KA/Pi or PWM/Pi is installed, is the profile kind "Pi-Sync".
 Details about that in 5) b).
 
-In KDE-Pim/Pi you can synchronize ( sync ) your calendar/addressbook 
-with another calendar/addressbook , by syncing  your 
-(local) calendar/addressbook  with a (remote) file. 
+In KDE-Pim/Pi you can synchronize ( sync ) your calendar/addressbook/ 
+passwordfile with another calendar/addressbook/passwordfile,
+by syncing  your (local) calendar/addressbook/passwordfile 
+with a (remote) file. 
 This remote file may on your local filesystem
 or on another (remote) device.
 
-If you want to sync with another remote device, 
-you have two create a sync profile.
+If you want to sync with another remote device, you have to create
+a sync profile.
 You have two choices for choosing the profil kind:
-I)  You have to choose profile kind "Remote file" and to specify a 
+I)  You can choose profile kind "Remote file" and specify a 
     command line download/upload command ( like scp, ftp, ...) to 
     a) download the remote file to your local machine to a temp file
     b) sync with this temp file
     c) upload the synced file to the remote device
-II) If you want to sync with a device, where KO/Pi( or KA/Pi ) is
+II) If you want to sync with a device, where KO/Pi( or KA/Pi, PWM/Pi) is
     installed, you can easily get the remote file via network 
     with the build in file transfer feature:
     Choose profile kind "Pi-Sync" and
-    a) Start KO/Pi or KA/Pi on remote device and
+    a) Start KO/Pi,KA/Pi or PWM/Pi on remote device and
        enable "Pi-Sync" on remote device with password and port.
     b) Specify password, port and IP address in your profile.
 
@@ -55,8 +56,8 @@ Everything is explained in more details below.
 NOTE:
 If you do not use profile kind "Pi-Sync",
 it is recommended to close 
-a running KO/Pi ( or KA/Pi) on the remote device.
-(Note: KO/Pi( or KA/Pi) running on Zaurus with 
+a running KO/Pi (KA/Pi, PWM/Pi) on the remote device.
+(Note: KO/Pi(KA/Pi, PWM/Pi) running on Zaurus with 
 FastLoad enabled will never be closed!)
 After syncing with a running KO/Pi on the remote device,
 a "save" on the remote device will tell you that it needs to merge (sync).
@@ -493,4 +494,4 @@ connection = fbusblue
    
    
    
-   
\ No newline at end of file
+   
--
cgit v0.9.0.2