summaryrefslogtreecommitdiff
authorzecke <zecke>2003-08-25 14:46:43 (UTC)
committer zecke <zecke>2003-08-25 14:46:43 (UTC)
commit292b097e7db25dd231381c5b09307a1fbe81a492 (patch) (side-by-side diff)
treeb103c6c5e15e784dc07af55539672a72559da821
parent5f292b6e4fc0f4ee8e4bced9a916f6bdce864b6b (diff)
downloadopie-292b097e7db25dd231381c5b09307a1fbe81a492.zip
opie-292b097e7db25dd231381c5b09307a1fbe81a492.tar.gz
opie-292b097e7db25dd231381c5b09307a1fbe81a492.tar.bz2
-instead of defining for an board we define now what this
boards need QPE_NEED_CALIBRATE -launcher is the only one executin application -allow processing of QCOPfiles after start ( qpeapplication ) -qcopenvelope no longer calls Global::execute
Diffstat (more/less context) (show whitespace changes)
-rw-r--r--library/custom-ipaq.h1
-rw-r--r--library/custom-ramses.h1
-rw-r--r--library/custom-sharp.h1
-rw-r--r--library/custom-simpad.h7
-rw-r--r--library/global.cpp45
-rw-r--r--library/inputmethodinterface.h17
-rw-r--r--library/qcopenvelope_qws.cpp54
-rw-r--r--library/qpeapplication.cpp142
-rw-r--r--library/qpeapplication.h6
9 files changed, 164 insertions, 110 deletions
diff --git a/library/custom-ipaq.h b/library/custom-ipaq.h
index 553b571..a9319fa 100644
--- a/library/custom-ipaq.h
+++ b/library/custom-ipaq.h
@@ -1,20 +1,21 @@
/**********************************************************************
** Copyright (C) 2000-2002 Trolltech AS. All rights reserved.
**
** This file is part of the Qtopia Environment.
**
** This file may be distributed and/or modified under the terms of the
** GNU General Public License version 2 as published by the Free Software
** Foundation and appearing in the file LICENSE.GPL included in the
** packaging of this file.
**
** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
** WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
**
** See http://www.trolltech.com/gpl/ for GPL licensing information.
**
** Contact info@trolltech.com if any conditions of this licensing are
** not clear to you.
**
**********************************************************************/
+#define QPE_NEED_CALIBRATION \ No newline at end of file
diff --git a/library/custom-ramses.h b/library/custom-ramses.h
index b841a66..9104931 100644
--- a/library/custom-ramses.h
+++ b/library/custom-ramses.h
@@ -1,68 +1,69 @@
/**********************************************************************
** Copyright (C) 2000-2002 Trolltech AS. All rights reserved.
**
** This file is part of the Qtopia Environment.
**
** This file may be distributed and/or modified under the terms of the
** GNU General Public License version 2 as published by the Free Software
** Foundation and appearing in the file LICENSE.GPL included in the
** packaging of this file.
**
** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
** WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
**
** See http://www.trolltech.com/gpl/ for GPL licensing information.
**
** Contact info@trolltech.com if any conditions of this licensing are
** not clear to you.
**
**********************************************************************/
+#define QPE_NEED_CALIBRATION
#define QPE_HAVE_TOGGLELIGHT
#define QPE_STARTMENU
#include <unistd.h>
#include <stdio.h>
#include <signal.h>
#include <fcntl.h>
#include <sys/ioctl.h>
#define QPE_HAVE_MEMALERTER
#define QPE_MEMALERTER_IMPL \
static void sig_handler(int sig) \
{ \
switch (sig) { \
case SIGHUP: \
memstate = VeryLow; \
break; \
case SIGUSR1: \
memstate = Normal; \
break; \
case SIGUSR2: \
memstate = Low; \
break; \
} \
} \
static void initMemalerter() \
{ \
struct sigaction sa; \
memset(&sa, '\0', sizeof sa); \
sa.sa_handler = sig_handler; \
sa.sa_flags = SA_RESTART; \
if (sigaction(SIGHUP, &sa, NULL) < 0) { \
return; \
} \
if (sigaction(SIGUSR1, &sa, NULL) < 0) { \
return; \
} \
if (sigaction(SIGUSR2, &sa, NULL) < 0) { \
return; \
} \
FILE *fo = fopen("/proc/sys/vm/freepg_signal_proc", "w"); \
\
if (!fo) \
return; \
fprintf(fo, "qpe\n"); \
fclose(fo); \
}
diff --git a/library/custom-sharp.h b/library/custom-sharp.h
index 3dab34f..3936875 100644
--- a/library/custom-sharp.h
+++ b/library/custom-sharp.h
@@ -1,97 +1,98 @@
/**********************************************************************
** Copyright (C) 2000-2002 Trolltech AS. All rights reserved.
**
** This file is part of the Qtopia Environment.
**
** This file may be distributed and/or modified under the terms of the
** GNU General Public License version 2 as published by the Free Software
** Foundation and appearing in the file LICENSE.GPL included in the
** packaging of this file.
**
** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
** WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
**
** See http://www.trolltech.com/gpl/ for GPL licensing information.
**
** Contact info@trolltech.com if any conditions of this licensing are
** not clear to you.
**
**********************************************************************/
+#define QPE_NEED_CALIBRATION
#define QPE_OWNAPM
#define QPE_HAVE_TOGGLELIGHT
#define QPE_NOCIBAUD
#define QPE_STARTMENU
#include <asm/sharp_apm.h>
#ifndef APM_IOC_BATTERY_BACK_CHK
#define APM_IOC_BATTERY_BACK_CHK _IO(APM_IOC_MAGIC, 32)
#endif
#ifndef APM_IOC_BATTERY_MAIN_CHK
#define APM_IOC_BATTERY_MAIN_CHK _IO(APM_IOC_MAGIC, 33)
#endif
#include <unistd.h>
#include <stdio.h>
#include <signal.h>
#include <fcntl.h>
#include <sys/ioctl.h>
#include <sys/ioctl.h>
#include <asm/sharp_char.h>
#define QPE_HAVE_MEMALERTER
#define QPE_MEMALERTER_IMPL \
static void sig_handler(int sig) \
{ \
switch (sig) { \
case SIGHUP: \
memstate = VeryLow; \
break; \
case SIGUSR1: \
memstate = Normal; \
break; \
case SIGUSR2: \
memstate = Low; \
break; \
} \
} \
static void initMemalerter() \
{ \
struct sigaction sa; \
memset(&sa, '\0', sizeof sa); \
sa.sa_handler = sig_handler; \
sa.sa_flags = SA_RESTART; \
if (sigaction(SIGHUP, &sa, NULL) < 0) { \
return; \
} \
if (sigaction(SIGUSR1, &sa, NULL) < 0) { \
return; \
} \
if (sigaction(SIGUSR2, &sa, NULL) < 0) { \
return; \
} \
FILE *fo = fopen("/proc/sys/vm/freepg_signal_proc", "w"); \
\
if (!fo) \
return; \
fprintf(fo, "qpe\n"); \
fclose(fo); \
}
#define QPE_INITIAL_NUMLOCK_STATE \
{ \
bool numLock = FALSE; \
sharp_kbdctl_modifstat st; \
int dev = ::open("/dev/sharp_kbdctl", O_RDWR); \
if( dev >= 0 ) { \
memset(&st, 0, sizeof(st)); \
st.which = 3; \
int ret = ioctl(dev, SHARP_KBDCTL_GETMODIFSTAT, (char*)&st); \
if( !ret ) \
numLock = (bool)st.stat; \
::close(dev); \
} \
return numLock; \
}
diff --git a/library/custom-simpad.h b/library/custom-simpad.h
new file mode 100644
index 0000000..3872dfd
--- a/dev/null
+++ b/library/custom-simpad.h
@@ -0,0 +1,7 @@
+/*
+ * GPLv2 only zecke@handhelds.org
+ hOlgAr
+ */
+
+
+#define QPE_NEED_CALIBRATION \ No newline at end of file
diff --git a/library/global.cpp b/library/global.cpp
index 189b830..5c89430 100644
--- a/library/global.cpp
+++ b/library/global.cpp
@@ -1,857 +1,812 @@
/**********************************************************************
** Copyright (C) 2000-2002 Trolltech AS. All rights reserved.
**
** This file is part of the Qtopia Environment.
**
** This file may be distributed and/or modified under the terms of the
** GNU General Public License version 2 as published by the Free Software
** Foundation and appearing in the file LICENSE.GPL included in the
** packaging of this file.
**
** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
** WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
**
** See http://www.trolltech.com/gpl/ for GPL licensing information.
**
** Contact info@trolltech.com if any conditions of this licensing are
** not clear to you.
**
**********************************************************************/
#define QTOPIA_INTERNAL_LANGLIST
#include <qpe/qpedebug.h>
#include <qpe/global.h>
#include <qpe/qdawg.h>
#include <qpe/qpeapplication.h>
#include <qpe/resource.h>
#include <qpe/storage.h>
#include <qpe/applnk.h>
#include <qpe/qcopenvelope_qws.h>
#include <qfile.h>
#include <qlabel.h>
#include <qtimer.h>
#include <qmap.h>
#include <qdict.h>
#include <qdir.h>
#include <qmessagebox.h>
#include <qregexp.h>
#include <stdlib.h>
#include <sys/stat.h>
#include <sys/wait.h>
#include <sys/types.h>
#include <fcntl.h>
#include <unistd.h>
#include <errno.h>
#include <qwindowsystem_qws.h> // for qwsServer
#include <qdatetime.h>
#include <qfile.h>
namespace {
// checks if the storage should be searched
bool checkStorage(const QString &path ){ // this is a small Config replacement cause config is too limited -zecke
QFile file(path );
if(!file.open(IO_ReadOnly ) )
return true;
QByteArray array = file.readAll();
QStringList list = QStringList::split('\n', QString( array ) );
for(QStringList::Iterator it = list.begin(); it != list.end(); ++it ){
if( (*it).startsWith("autocheck = 0" ) ){
return false;
}else if( (*it).startsWith("autocheck = 1" ) ){
return true;
}
}
return true;
}
}
//#include "quickexec_p.h"
class Emitter : public QObject {
Q_OBJECT
public:
Emitter( QWidget* receiver, const QString& document )
{
connect(this, SIGNAL(setDocument(const QString&)),
receiver, SLOT(setDocument(const QString&)));
emit setDocument(document);
disconnect(this, SIGNAL(setDocument(const QString&)),
receiver, SLOT(setDocument(const QString&)));
}
signals:
void setDocument(const QString&);
};
class StartingAppList : public QObject {
Q_OBJECT
public:
static void add( const QString& name );
static bool isStarting( const QString name );
private slots:
void handleNewChannel( const QString &);
private:
StartingAppList( QObject *parent=0, const char* name=0 ) ;
QDict<QTime> dict;
static StartingAppList *appl;
};
StartingAppList* StartingAppList::appl = 0;
StartingAppList::StartingAppList( QObject *parent, const char* name )
:QObject( parent, name )
{
#if QT_VERSION >= 232 && defined(QWS)
connect( qwsServer, SIGNAL( newChannel(const QString&)),
this, SLOT( handleNewChannel(const QString&)) );
#endif
dict.setAutoDelete( TRUE );
}
void StartingAppList::add( const QString& name )
{
#if QT_VERSION >= 232 && !defined(QT_NO_COP)
if ( !appl )
appl = new StartingAppList;
QTime *t = new QTime;
t->start();
appl->dict.insert( "QPE/Application/" + name, t );
#endif
}
bool StartingAppList::isStarting( const QString name )
{
#if QT_VERSION >= 232 && !defined(QT_NO_COP)
if ( appl ) {
QTime *t = appl->dict.find( "QPE/Application/" + name );
if ( !t )
return FALSE;
if ( t->elapsed() > 10000 ) {
// timeout in case of crash or something
appl->dict.remove( "QPE/Application/" + name );
return FALSE;
}
return TRUE;
}
#endif
return FALSE;
}
void StartingAppList::handleNewChannel( const QString & name )
{
#if QT_VERSION >= 232 && !defined(QT_NO_COP)
dict.remove( name );
#endif
}
static bool docDirCreated = FALSE;
static QDawg* fixed_dawg = 0;
static QDict<QDawg> *named_dawg = 0;
static QString qpeDir()
{
QString dir = getenv("OPIEDIR");
if ( dir.isEmpty() ) dir = "..";
return dir;
}
static QString dictDir()
{
return qpeDir() + "/etc/dict";
}
/*!
\class Global global.h
\brief The Global class provides application-wide global functions.
The Global functions are grouped as follows:
\tableofcontents
\section1 User Interface
The statusMessage() function provides short-duration messages to the
user. The showInputMethod() function shows the current input method,
and hideInputMethod() hides the input method.
\section1 Document related
The findDocuments() function creates a set of \link doclnk.html
DocLnk\endlink objects in a particular folder.
\section1 Filesystem related
Global provides an applicationFileName() function that returns the
full path of an application-specific file.
The execute() function runs an application.
\section1 Word list related
A list of words relevant to the current locale is maintained by the
system. The list is held in a \link qdawg.html DAWG\endlink
(implemented by the QDawg class). This list is used, for example, by
the pickboard input method.
The global QDawg is returned by fixedDawg(); this cannot be updated.
An updatable copy of the global QDawg is returned by addedDawg().
Applications may have their own word lists stored in \l{QDawg}s
which are returned by dawg(). Use addWords() to add words to the
updateable copy of the global QDawg or to named application
\l{QDawg}s.
\section1 Quoting
The shellQuote() function quotes a string suitable for passing to a
shell. The stringQuote() function backslash escapes '\' and '"'
characters.
\section1 Hardware
The writeHWClock() function sets the hardware clock to the system
clock's date and time.
\ingroup qtopiaemb
*/
/*!
\internal
*/
Global::Global()
{
}
/*!
Returns the unchangeable QDawg that contains general
words for the current locale.
\sa addedDawg()
*/
const QDawg& Global::fixedDawg()
{
if ( !fixed_dawg ) {
if ( !docDirCreated )
createDocDir();
fixed_dawg = new QDawg;
QString dawgfilename = dictDir() + "/dawg";
QString words_lang;
QStringList langs = Global::languageList();
for (QStringList::ConstIterator it = langs.begin(); it!=langs.end(); ++it) {
QString lang = *it;
words_lang = dictDir() + "/words." + lang;
QString dawgfilename_lang = dawgfilename + "." + lang;
if ( QFile::exists(dawgfilename_lang) ||
QFile::exists(words_lang) ) {
dawgfilename = dawgfilename_lang;
break;
}
}
QFile dawgfile(dawgfilename);
if ( !dawgfile.exists() ) {
QString fn = dictDir() + "/words";
if ( QFile::exists(words_lang) )
fn = words_lang;
QFile in(fn);
if ( in.open(IO_ReadOnly) ) {
fixed_dawg->createFromWords(&in);
dawgfile.open(IO_WriteOnly);
fixed_dawg->write(&dawgfile);
dawgfile.close();
}
} else {
fixed_dawg->readFile(dawgfilename);
}
}
return *fixed_dawg;
}
/*!
Returns the changeable QDawg that contains general
words for the current locale.
\sa fixedDawg()
*/
const QDawg& Global::addedDawg()
{
return dawg("local");
}
/*!
Returns the QDawg with the given \a name.
This is an application-specific word list.
\a name should not contain "/".
*/
const QDawg& Global::dawg(const QString& name)
{
createDocDir();
if ( !named_dawg )
named_dawg = new QDict<QDawg>;
QDawg* r = named_dawg->find(name);
if ( !r ) {
r = new QDawg;
named_dawg->insert(name,r);
QString dawgfilename = applicationFileName("Dictionary", name ) + ".dawg";
QFile dawgfile(dawgfilename);
if ( dawgfile.open(IO_ReadOnly) )
r->readFile(dawgfilename);
}
return *r;
}
/*!
\overload
Adds \a wordlist to the addedDawg().
Note that the addition of words persists between program executions
(they are saved in the dictionary files), so you should confirm the
words with the user before adding them.
*/
void Global::addWords(const QStringList& wordlist)
{
addWords("local",wordlist);
}
/*!
\overload
Adds \a wordlist to the addedDawg().
Note that the addition of words persists between program executions
(they are saved in the dictionary files), so you should confirm the
words with the user before adding them.
*/
void Global::addWords(const QString& dictname, const QStringList& wordlist)
{
QDawg& d = (QDawg&)dawg(dictname);
QStringList all = d.allWords() + wordlist;
d.createFromWords(all);
QString dawgfilename = applicationFileName("Dictionary", dictname) + ".dawg";
QFile dawgfile(dawgfilename);
if ( dawgfile.open(IO_WriteOnly) ) {
d.write(&dawgfile);
dawgfile.close();
}
// #### Re-read the dawg here if we use mmap().
// #### Signal other processes to re-read.
}
/*!
Returns the full path for the application called \a appname, with the
given \a filename. Returns QString::null if there was a problem creating
the directory tree for \a appname.
If \a filename contains "/", it is the caller's responsibility to
ensure that those directories exist.
*/
QString Global::applicationFileName(const QString& appname, const QString& filename)
{
QDir d;
QString r = getenv("HOME");
r += "/Applications/";
if ( !QFile::exists( r ) )
if ( d.mkdir(r) == false )
return QString::null;
r += appname;
if ( !QFile::exists( r ) )
if ( d.mkdir(r) == false )
return QString::null;
r += "/"; r += filename;
return r;
}
/*!
\internal
*/
void Global::createDocDir()
{
if ( !docDirCreated ) {
docDirCreated = TRUE;
mkdir( QPEApplication::documentDir().latin1(), 0755 );
}
}
/*!
Displays a status \a message to the user. This usually appears
in the taskbar for a short amount of time, then disappears.
*/
void Global::statusMessage(const QString& message)
{
#if !defined(QT_NO_COP)
QCopEnvelope e( "QPE/TaskBar", "message(QString)" );
e << message;
#endif
}
/*!
\internal
*/
void Global::applyStyle()
{
#if !defined(QT_NO_COP)
QCopChannel::send( "QPE/System", "applyStyle()" );
#else
((QPEApplication *)qApp)->applyStyle(); // apply without needing QCop for floppy version
#endif
}
/*!
\internal
*/
QWidget *Global::shutdown( bool )
{
#if !defined(QT_NO_COP)
QCopChannel::send( "QPE/System", "shutdown()" );
#endif
return 0;
}
/*!
\internal
*/
QWidget *Global::restart( bool )
{
#if !defined(QT_NO_COP)
QCopChannel::send( "QPE/System", "restart()" );
#endif
return 0;
}
/*!
Explicitly show the current input method.
Input methods are indicated in the taskbar by a small icon. If the
input method is activated (shown) then it takes up some proportion
of the bottom of the screen, to allow the user to interact (input
characters) with it.
\sa hideInputMethod()
*/
void Global::showInputMethod()
{
#if !defined(QT_NO_COP)
QCopChannel::send( "QPE/TaskBar", "showInputMethod()" );
#endif
}
/*!
Explicitly hide the current input method.
The current input method is still indicated in the taskbar, but no
longer takes up screen space, and can no longer be interacted with.
\sa showInputMethod()
*/
void Global::hideInputMethod()
{
#if !defined(QT_NO_COP)
QCopChannel::send( "QPE/TaskBar", "hideInputMethod()" );
#endif
}
/*!
\internal
*/
bool Global::isBuiltinCommand( const QString &name )
{
if(!builtin)
return FALSE; // yes, it can happen
for (int i = 0; builtin[i].file; i++) {
if ( builtin[i].file == name ) {
return TRUE;
}
}
return FALSE;
}
Global::Command* Global::builtin=0;
QGuardedPtr<QWidget> *Global::running=0;
/*!
\class Global::Command
\brief The Global::Command class is internal.
\internal
*/
/*!
\internal
*/
void Global::setBuiltinCommands( Command* list )
{
if ( running )
delete [] running;
builtin = list;
int count = 0;
if (!builtin)
return;
while ( builtin[count].file )
count++;
running = new QGuardedPtr<QWidget> [ count ];
}
/*!
\internal
*/
void Global::setDocument( QWidget* receiver, const QString& document )
{
Emitter emitter(receiver,document);
}
/*!
\internal
*/
bool Global::terminateBuiltin( const QString& n )
{
if (!builtin)
return FALSE;
for (int i = 0; builtin[i].file; i++) {
if ( builtin[i].file == n ) {
delete running[i];
return TRUE;
}
}
return FALSE;
}
/*!
\internal
*/
void Global::terminate( const AppLnk* app )
{
//if ( terminateBuiltin(app->exec()) ) return; // maybe? haven't tried this
#ifndef QT_NO_COP
QCString channel = "QPE/Application/" + app->exec().utf8();
if ( QCopChannel::isRegistered(channel) ) {
QCopEnvelope e(channel, "quit()");
}
#endif
}
/*!
Low-level function to run command \a c.
\warning Do not use this function. Use execute instead.
\sa execute()
*/
void Global::invoke(const QString &c)
{
// Convert the command line in to a list of arguments
QStringList list = QStringList::split(QRegExp(" *"),c);
#if !defined(QT_NO_COP)
QString ap=list[0];
// see if the application is already running
// XXX should lock file /tmp/qcop-msg-ap
if ( QCopChannel::isRegistered( ("QPE/Application/" + ap).latin1() ) ) {
// If the channel is already register, the app is already running, so show it.
{ QCopEnvelope env( ("QPE/Application/" + ap).latin1(), "raise()" ); }
//QCopEnvelope e("QPE/System", "notBusy(QString)" );
//e << ap;
return;
}
// XXX should unlock file /tmp/qcop-msg-ap
//see if it is being started
if ( StartingAppList::isStarting( ap ) ) {
// FIXME take it out for now, since it leads to a much to short showing of wait if
// some entry is clicked.
// Real cause is that ::execute is called twice for document tab. But it would need some larger changes
// to fix that, and with future syncs with qtopia 1.6 it will change anyway big time since somebody there
// had the idea that an apploader belongs to the launcher ...
//QCopEnvelope e("QPE/System", "notBusy(QString)" );
//e << ap;
return;
}
#endif
#ifdef QT_NO_QWS_MULTIPROCESS
QMessageBox::warning( 0, "Error", "Could not find the application " + c, "Ok", 0, 0, 0, 1 );
#else
QStrList slist;
unsigned int j;
for ( j = 0; j < list.count(); j++ )
slist.append( list[j].utf8() );
const char **args = new (const char *)[slist.count() + 1];
for ( j = 0; j < slist.count(); j++ )
args[j] = slist.at(j);
args[j] = NULL;
#if !defined(QT_NO_COP)
// an attempt to show a wait...
// more logic should be used, but this will be fine for the moment...
QCopEnvelope ( "QPE/System", "busy()" );
#endif
#ifdef HAVE_QUICKEXEC
QString libexe = qpeDir()+"/binlib/lib"+args[0] + ".so";
qDebug("libfile = %s", libexe.latin1() );
if ( QFile::exists( libexe ) ) {
qDebug("calling quickexec %s", libexe.latin1() );
quickexecv( libexe.utf8().data(), (const char **)args );
} else
#endif
{
bool success = false;
int pfd [2];
if ( ::pipe ( pfd ) < 0 )
pfd [0] = pfd [1] = -1;
pid_t pid = ::fork ( );
if ( pid == 0 ) { // child
for ( int fd = 3; fd < 100; fd++ ) {
if ( fd != pfd [1] )
::close ( fd );
}
::setpgid ( ::getpid ( ), ::getppid ( ));
// Closing of fd[1] indicates that the execvp succeeded!
if ( pfd [1] >= 0 )
::fcntl ( pfd [1], F_SETFD, FD_CLOEXEC );
// Try bindir first, so that foo/bar works too
::execv ( qpeDir ( ) + "/bin/" + args [0], (char * const *) args );
::execvp ( args [0], (char * const *) args );
char resultByte = 1;
if ( pfd [1] >= 0 )
::write ( pfd [1], &resultByte, 1 );
::_exit ( -1 );
}
else if ( pid > 0 ) {
success = true;
if ( pfd [1] >= 0 )
::close ( pfd [1] );
if ( pfd [0] >= 0 ) {
while ( true ) {
char resultByte;
int n = ::read ( pfd [0], &resultByte, 1 );
if ( n == 1 ) {
success = false;
break;
}
if (( n == -1 ) && (( errno == ECHILD ) || ( errno == EINTR )))
continue;
break; // success
}
::close ( pfd [0] );
}
}
if ( success )
StartingAppList::add( list[0] );
else
QMessageBox::warning( 0, "Error", "Could not start the application " + c, "Ok", 0, 0, 0, 1 );
}
#endif //QT_NO_QWS_MULTIPROCESS
}
/*!
Executes the application identfied by \a c, passing \a
document if it isn't null.
Note that a better approach might be to send a QCop message to the
application's QPE/Application/\e{appname} channel.
*/
void Global::execute( const QString &c, const QString& document )
{
- if ( qApp->type() != QApplication::GuiServer ) {
// ask the server to do the work
#if !defined(QT_NO_COP)
if ( document.isNull() ) {
QCopEnvelope e( "QPE/System", "execute(QString)" );
e << c;
} else {
QCopEnvelope e( "QPE/System", "execute(QString,QString)" );
e << c << document;
}
#endif
return;
}
- // Attempt to execute the app using a builtin class for the app first
- // else try and find it in the bin directory
- if (builtin) {
- for (int i = 0; builtin[i].file; i++) {
- if ( builtin[i].file == c ) {
- if ( running[i] ) {
- if ( !document.isNull() && builtin[i].documentary )
- setDocument(running[i], document);
- running[i]->raise();
- running[i]->show();
- running[i]->setActiveWindow();
- } else {
- running[i] = builtin[i].func( builtin[i].maximized );
- }
-#ifndef QT_NO_COP
- QCopEnvelope e("QPE/System", "notBusy(QString)" );
- e << c; // that was quick ;-)
-#endif
- return;
- }
- }
- }
-
- //Global::invoke(c, document);
-
- // Convert the command line in to a list of arguments
- QStringList list = QStringList::split(QRegExp(" *"),c);
-
-#if !defined(QT_NO_COP)
- QString ap=list[0];
-
- qDebug("executing %s", ap.latin1() );
-
- /* if need be, sending a qcop message will result in an invoke, see
- preceeding function */
- invoke( ap );
- //{ QCopEnvelope env( ("QPE/Application/" + ap).latin1(), "raise()" ); }
- if ( !document.isEmpty() ) {
- QCopEnvelope env( ("QPE/Application/" + ap).latin1(), "setDocument(QString)" );
- env << document;
- }
-#endif
-}
-
/*!
Returns the string \a s with the characters '\', '"', and '$' quoted
by a preceeding '\'.
\sa stringQuote()
*/
QString Global::shellQuote(const QString& s)
{
QString r="\"";
for (int i=0; i<(int)s.length(); i++) {
char c = s[i].latin1();
switch (c) {
case '\\': case '"': case '$':
r+="\\";
}
r += s[i];
}
r += "\"";
return r;
}
/*!
Returns the string \a s with the characters '\' and '"' quoted by a
preceeding '\'.
\sa shellQuote()
*/
QString Global::stringQuote(const QString& s)
{
QString r="\"";
for (int i=0; i<(int)s.length(); i++) {
char c = s[i].latin1();
switch (c) {
case '\\': case '"':
r+="\\";
}
r += s[i];
}
r += "\"";
return r;
}
/*!
Finds all documents on the system's document directories which
match the filter \a mimefilter, and appends the resulting DocLnk
objects to \a folder.
*/
void Global::findDocuments(DocLnkSet* folder, const QString &mimefilter)
{
QString homedocs = QString(getenv("HOME")) + "/Documents";
DocLnkSet d(homedocs,mimefilter);
folder->appendFrom(d);
/** let's do intellegint way of searching these files
* a) the user don't want to check mediums global
* b) the user wants to check but use the global options for it
* c) the user wants to check it but not this medium
* d) the user wants to check and this medium as well
*
* In all cases we need to apply a different mimefilter to
* the medium.
* a) mimefilter.isEmpty() we need to apply the responding filter
* either the global or the one on the medium
*
* b) mimefilter is set to an application we need to find out if the
* mimetypes are included in the mime mask of the medium
*/
StorageInfo storage;
const QList<FileSystem> &fs = storage.fileSystems();
QListIterator<FileSystem> it ( fs );
for ( ; it.current(); ++it ) {
if ( (*it)->isRemovable() ) { // let's find out if we should search on it
// this is a candidate look at the cf and see if we should search on it
QString path = (*it)->path();
if( !checkStorage((*it)->path() + "/.opiestorage.cf" ) )
continue;
DocLnkSet ide( path, mimefilter );
folder->appendFrom(ide);
} else if ( (*it)->disk() == "/dev/mtdblock6" || (*it)->disk() == "tmpfs" ) {
QString path = (*it)->path() + "/Documents";
DocLnkSet ide( path, mimefilter );
folder->appendFrom(ide);
}
}
}
QStringList Global::languageList()
{
QString lang = getenv("LANG");
QStringList langs;
langs.append(lang);
int i = lang.find(".");
if ( i > 0 )
lang = lang.left( i );
i = lang.find( "_" );
if ( i > 0 )
langs.append(lang.left(i));
return langs;
}
QStringList Global::helpPath()
{
QString qpeDir = QPEApplication::qpeDir();
QStringList path;
QStringList langs = Global::languageList();
for (QStringList::ConstIterator it = langs.fromLast(); it!=langs.end(); --it) {
QString lang = *it;
if ( !lang.isEmpty() )
path += qpeDir + "/help/" + lang + "/html";
}
path += qpeDir + "/pics";
path += qpeDir + "/help/html";
/* we even put english into the en dir so try it as fallback as well for opie */
path += qpeDir + "/help/en/html";
path += qpeDir + "/docs";
return path;
}
#include "global.moc"
diff --git a/library/inputmethodinterface.h b/library/inputmethodinterface.h
index 88a121d..488f601 100644
--- a/library/inputmethodinterface.h
+++ b/library/inputmethodinterface.h
@@ -1,64 +1,75 @@
/**********************************************************************
** Copyright (C) 2000-2002 Trolltech AS. All rights reserved.
**
** This file is part of the Qtopia Environment.
**
** This file may be distributed and/or modified under the terms of the
** GNU General Public License version 2 as published by the Free Software
** Foundation and appearing in the file LICENSE.GPL included in the
** packaging of this file.
**
** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
** WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
**
** See http://www.trolltech.com/gpl/ for GPL licensing information.
**
** Contact info@trolltech.com if any conditions of this licensing are
** not clear to you.
**
**********************************************************************/
#ifndef INPUTMETHODINTERFACE_H
#define INPUTMETHODINTERFACE_H
#include <qpe/qcom.h>
#include <qnamespace.h>
#include <qstring.h>
#ifndef QT_NO_COMPONENT
// {637A8A14-AF98-41DA-969A-2BD16ECDA8C7}
# ifndef IID_InputMethod
# define IID_InputMethod QUuid( 0x637a8a14, 0xaf98, 0x41da, 0x96, 0x9a, 0x2b, 0xd1, 0x6e, 0xcd, 0xa8, 0xc7)
# endif
#endif
class QWidget;
class QPixmap;
class QObject;
class QWSInputMethod;
struct InputMethodInterface : public QUnknownInterface
{
virtual QWidget *inputMethod( QWidget *parent, Qt::WFlags f ) = 0;
virtual void resetState() = 0;
virtual QPixmap *icon() = 0;
virtual QString name() = 0;
virtual void onKeyPress( QObject *receiver, const char *slot ) = 0;
};
// {70F0991C-8282-4625-A279-BD9D7D959FF6}
#ifndef IID_ExtInputMethod
#define IID_ExtInputMethod QUuid( 0x70f0991c, 0x8282, 0x4625, 0xa2, 0x79, 0xbd, 0x9d, 0x7d, 0x95, 0x9f, 0xf6)
#endif
struct ExtInputMethodInterface : public QUnknownInterface
{
- virtual QWSInputMethod *inputMethod() = 0;
- virtual QPixmap *icon() = 0;
+ //identifying functions.
virtual QString name() = 0;
- virtual QWidget *widget( QWidget *parent, Qt::WFlags f )= 0;
+ virtual QPixmap *icon() = 0;
+
+ // state managment.
+ virtual void resetState() = 0;
+
+ virtual QWidget *keyboardWidget( QWidget *parent, Qt::WFlags f ) = 0;
+ // filenames, not menu names.
+ virtual QStringList compatible() = 0;
+
+ virtual QWSInputMethod *inputMethod() = 0;
+ virtual QWidget *statusWidget( QWidget *parent, Qt::WFlags f )= 0;
+
+ virtual void qcopReceive( const QCString &msg, const QByteArray &data )= 0;
};
#endif
diff --git a/library/qcopenvelope_qws.cpp b/library/qcopenvelope_qws.cpp
index 81bb0f5..0aac32b 100644
--- a/library/qcopenvelope_qws.cpp
+++ b/library/qcopenvelope_qws.cpp
@@ -1,173 +1,147 @@
/**********************************************************************
** Copyright (C) 2000-2002 Trolltech AS. All rights reserved.
**
** This file is part of the Qtopia Environment.
**
** This file may be distributed and/or modified under the terms of the
** GNU General Public License version 2 as published by the Free Software
** Foundation and appearing in the file LICENSE.GPL included in the
** packaging of this file.
**
** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
** WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
**
** See http://www.trolltech.com/gpl/ for GPL licensing information.
**
** Contact info@trolltech.com if any conditions of this licensing are
** not clear to you.
**
**********************************************************************/
#ifndef QT_NO_COP
#include "qcopenvelope_qws.h"
#endif
#include "global.h"
#include <qbuffer.h>
#include <qdatastream.h>
#include <qfile.h>
#include <unistd.h>
#include <errno.h>
#include <sys/file.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <time.h>
#ifndef QT_NO_COP
/*!
\class QCopEnvelope qcopenvelope_qws.h
\brief The QCopEnvelope class encapsulates and sends QCop messages
over QCopChannels.
QCop messages allow applications to communicate with each other.
These messages are sent using QCopEnvelope, and received by connecting
to a QCopChannel.
To send a message, use the following protocol:
\code
QCopEnvelope e(channelname, messagename);
e << parameter1 << parameter2 << ...;
\endcode
For messages without parameters, simply use:
\code
QCopEnvelope e(channelname, messagename);
\endcode
(Do not try to simplify this further as it may confuse some
compilers.)
The \c{channelname} of channels within Qtopia all start with "QPE/".
The \c{messagename} is a function identifier followed by a list of types
in parentheses. There is no whitespace in the message name.
To receive a message, you will generally just use your application's
predefined QPE/Application/\e{appname} channel
(see QPEApplication::appMessage()), but you can make another channel
and connect it to a slot like this:
\code
myChannel = new QCopChannel( "QPE/FooBar", this );
connect( myChannel, SIGNAL(received(const QCString &, const QByteArray &)),
this, SLOT(fooBarMessage( const QCString &, const QByteArray &)) );
\endcode
See also, the \link qcop.html list of Qtopia messages\endlink.
*/
/*!
Constructs a QCopEnvelope that will write \a message to \a channel.
If \a message has parameters, you must then use operator<<() to
add these parameters to the envelope.
*/
QCopEnvelope::QCopEnvelope( const QCString& channel, const QCString& message ) :
QDataStream(new QBuffer),
ch(channel), msg(message)
{
device()->open(IO_WriteOnly);
}
/*!
Writes the message and then destroys the QCopEnvelope.
*/
QCopEnvelope::~QCopEnvelope()
{
QByteArray data = ((QBuffer*)device())->buffer();
const int pref=16;
if ( qstrncmp(ch.data(),"QPE/Application/",pref)==0 ) {
QString qcopfn("/tmp/qcop-msg-");
qcopfn += ch.mid(pref);
QFile qcopfile(qcopfn);
if ( qcopfile.open(IO_WriteOnly | IO_Append) ) {
+#ifndef Q_OS_WIN32
if(flock(qcopfile.handle(), LOCK_EX)) {
- /* some error occured */
+ /* some error occurred */
qWarning(QString("Failed to obtain file lock on %1 (%2)")
.arg(qcopfn).arg( errno ));
}
- /* file locked, but might be stale (e.g. program for whatever
- reason did not start). I modified more than 1 minute ago,
- truncate the file */
- struct stat buf;
- time_t t;
- if (!fstat(qcopfile.handle(), &buf) && (time(&t) != (time_t)-1) ) {
- // success on fstat, lets compare times
- if (buf.st_ctime + 60 < t) {
- qWarning("stale file " + qcopfn + " found. Truncating");
- ftruncate(qcopfile.handle(), 0);
- qcopfile.reset();
- }
- }
-
- if ( !QCopChannel::isRegistered(ch) ) {
- int fsize = qcopfile.size();
+#endif
{
QDataStream ds(&qcopfile);
ds << ch << msg << data;
+ qcopfile.flush();
+#ifndef Q_OS_WIN32
flock(qcopfile.handle(), LOCK_UN);
+#endif
qcopfile.close();
}
- if (fsize == 0) {
- QString cmd = ch.mid(pref);
- Global::execute(cmd);
- }
-
- char c;
- for (int i=0; (c=msg[i]); i++) {
- if ( c == ' ' ) {
- // Return-value required
- // ###### wait for it
- break;
- } else if ( c == '(' ) {
- // No return value
- break;
- }
- }
- goto end;
- } // endif isRegisterd
- flock(qcopfile.handle(), LOCK_UN);
- qcopfile.close();
- qcopfile.remove();
+ QByteArray b;
+ QDataStream stream(b, IO_WriteOnly);
+ stream << QString(ch.mid(pref));
+ QCopChannel::send("QPE/Server", "processQCop(QString)", b);
+ delete device();
+ return;
} else {
- qWarning(QString("Failed to obtain file lock on %1")
+ qWarning(QString("Failed to open file %1")
.arg(qcopfn));
} // endif open
}
else if (qstrncmp(ch.data(), "QPE/SOAP/", 9) == 0) {
// If this is a message that should go along the SOAP channel, we move the
// endpoint URL to the data section.
QString endpoint = ch.mid(9);
ch = "QPE/SOAP";
// Since byte arrays are explicitly shared, this is appended to the data variable..
*this << endpoint;
}
+
QCopChannel::send(ch,msg,data);
-end:
delete device();
}
#endif
diff --git a/library/qpeapplication.cpp b/library/qpeapplication.cpp
index d1a7cd2..b1b7ed4 100644
--- a/library/qpeapplication.cpp
+++ b/library/qpeapplication.cpp
@@ -1,1851 +1,1949 @@
/**********************************************************************
** Copyright (C) 2000-2002 Trolltech AS. All rights reserved.
**
** This file is part of the Qtopia Environment.
**
** This file may be distributed and/or modified under the terms of the
** GNU General Public License version 2 as published by the Free Software
** Foundation and appearing in the file LICENSE.GPL included in the
** packaging of this file.
**
** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
** WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
**
** See http://www.trolltech.com/gpl/ for GPL licensing information.
**
** Contact info@trolltech.com if any conditions of this licensing are
** not clear to you.
**
** $Id$
**
**********************************************************************/
#define QTOPIA_INTERNAL_LANGLIST
#include <stdlib.h>
#include <unistd.h>
#include <linux/limits.h> // needed for some toolchains (PATH_MAX)
#include <qfile.h>
#ifdef Q_WS_QWS
#ifndef QT_NO_COP
#if QT_VERSION <= 231
#define private public
#define sendLocally processEvent
#include "qcopenvelope_qws.h"
#undef private
#else
#include "qcopenvelope_qws.h"
#endif
#endif
#include <qwindowsystem_qws.h>
#endif
#include <qtextstream.h>
#include <qpalette.h>
#include <qbuffer.h>
#include <qptrdict.h>
#include <qregexp.h>
#include <qdir.h>
#include <qlabel.h>
#include <qdialog.h>
#include <qdragobject.h>
#include <qtextcodec.h>
#include <qevent.h>
#include <qtooltip.h>
#include <qsignal.h>
#include <qmainwindow.h>
+
+#if defined(Q_WS_QWS) && !defined(QT_NO_COP)
+#define QTOPIA_INTERNAL_INITAPP
#include "qpeapplication.h"
#include "qpestyle.h"
#include "styleinterface.h"
#if QT_VERSION >= 300
#include <qstylefactory.h>
#else
#include <qplatinumstyle.h>
#include <qwindowsstyle.h>
#include <qmotifstyle.h>
#include <qmotifplusstyle.h>
#include "lightstyle.h"
#include <qpe/qlibrary.h>
#endif
#include "global.h"
#include "resource.h"
#if QT_VERSION <= 230 && defined(QT_NO_CODECS)
#include "qutfcodec.h"
#endif
#include "config.h"
#include "network.h"
#ifdef QWS
#include "fontmanager.h"
#endif
#include "alarmserver.h"
#include "applnk.h"
#include "qpemenubar.h"
#include "textcodecinterface.h"
#include "imagecodecinterface.h"
#include <unistd.h>
#include <sys/file.h>
#include <sys/ioctl.h>
#include <sys/soundcard.h>
#include "qt_override_p.h"
class QPEApplicationData
{
public:
QPEApplicationData ( )
: presstimer( 0 ), presswidget( 0 ), rightpressed( false ), kbgrabbed( false ),
notbusysent( false ), preloaded( false ), forceshow( false ), nomaximize( false ),
keep_running( true ), qpe_main_widget( 0 )
{
qcopq.setAutoDelete( TRUE );
}
int presstimer;
QWidget* presswidget;
QPoint presspos;
bool rightpressed : 1;
bool kbgrabbed : 1;
bool notbusysent : 1;
bool preloaded : 1;
bool forceshow : 1;
bool nomaximize : 1;
bool keep_running : 1;
QString appName;
struct QCopRec
{
QCopRec( const QCString &ch, const QCString &msg,
const QByteArray &d ) :
channel( ch ), message( msg ), data( d )
{ }
QCString channel;
QCString message;
QByteArray data;
};
QWidget* qpe_main_widget;
QList<QCopRec> qcopq;
void enqueueQCop( const QCString &ch, const QCString &msg,
const QByteArray &data )
{
qcopq.append( new QCopRec( ch, msg, data ) );
}
void sendQCopQ()
{
QCopRec * r;
#ifndef QT_NO_COP
for ( QListIterator<QCopRec> it( qcopq ); ( r = it.current() ); ++it )
QCopChannel::sendLocally( r->channel, r->message, r->data );
#endif
qcopq.clear();
}
static void show_mx(QWidget* mw, bool nomaximize)
{
// ugly hack, remove that later after finding a sane solution
// Addendum: Only Sharp currently has models with high resolution but (physically) small displays,
// so this is only useful if QT_QWS_SIMPAD is NOT defined. E.g. SIMpad has 800x600 but has
// a (physically) large enough display to use the small icons
#ifndef QT_QWS_SIMPAD
if ( QPEApplication::desktop() ->width() >= 600 && ( mw->inherits("QMainWindow") || mw->isA("QMainWindow") ) ) {
( ( QMainWindow* ) mw )->setUsesBigPixmaps( true );
}
#endif
if ( mw->layout() && mw->inherits("QDialog") ) {
QPEApplication::showDialog((QDialog*)mw, nomaximize);
}
else {
#ifdef Q_WS_QWS
if ( !nomaximize )
mw->showMaximized();
else
#endif
mw->show();
}
}
static bool setWidgetCaptionFromAppName( QWidget* /*mw*/, const QString& /*appName*/, const QString& /*appsPath*/ )
{
/*
// This works but disable it for now until it is safe to apply
// What is does is scan the .desktop files of all the apps for
// the applnk that has the corresponding argv[0] as this program
// then it uses the name stored in the .desktop file as the caption
// for the main widget. This saves duplicating translations for
// the app name in the program and in the .desktop files.
AppLnkSet apps( appsPath );
QList<AppLnk> appsList = apps.children();
for ( QListIterator<AppLnk> it(appsList); it.current(); ++it ) {
if ( (*it)->exec() == appName ) {
mw->setCaption( (*it)->name() );
return TRUE;
}
}
*/
return FALSE;
}
void show(QWidget* mw, bool nomax)
{
setWidgetCaptionFromAppName( mw, appName, QPEApplication::qpeDir() + "apps" );
nomaximize = nomax;
qpe_main_widget = mw;
#ifndef QT_NO_COP
sendQCopQ();
#endif
if ( preloaded ) {
if (forceshow)
show_mx(mw, nomax);
}
else if ( keep_running ) {
show_mx(mw, nomax);
}
}
void loadTextCodecs()
{
QString path = QPEApplication::qpeDir() + "/plugins/textcodecs";
QDir dir( path, "lib*.so" );
QStringList list;
if ( dir. exists ( ))
list = dir.entryList();
QStringList::Iterator it;
for ( it = list.begin(); it != list.end(); ++it ) {
TextCodecInterface *iface = 0;
QLibrary *lib = new QLibrary( path + "/" + *it );
if ( lib->queryInterface( IID_QtopiaTextCodec, (QUnknownInterface**)&iface ) == QS_OK && iface ) {
QValueList<int> mibs = iface->mibEnums();
for (QValueList<int>::ConstIterator i = mibs.begin(); i != mibs.end(); ++i) {
(void)iface->createForMib(*i);
// ### it exists now; need to remember if we can delete it
}
}
else {
lib->unload();
delete lib;
}
}
}
void loadImageCodecs()
{
QString path = QPEApplication::qpeDir() + "/plugins/imagecodecs";
QDir dir( path, "lib*.so" );
QStringList list;
if ( dir. exists ( ))
list = dir.entryList();
QStringList::Iterator it;
for ( it = list.begin(); it != list.end(); ++it ) {
ImageCodecInterface *iface = 0;
QLibrary *lib = new QLibrary( path + "/" + *it );
if ( lib->queryInterface( IID_QtopiaImageCodec, (QUnknownInterface**)&iface ) == QS_OK && iface ) {
QStringList formats = iface->keys();
for (QStringList::ConstIterator i = formats.begin(); i != formats.end(); ++i) {
(void)iface->installIOHandler(*i);
// ### it exists now; need to remember if we can delete it
}
}
else {
lib->unload();
delete lib;
}
}
}
QString styleName;
QString decorationName;
};
class ResourceMimeFactory : public QMimeSourceFactory
{
public:
ResourceMimeFactory() : resImage( 0 )
{
setFilePath( Global::helpPath() );
setExtensionType( "html", "text/html;charset=UTF-8" );
}
~ResourceMimeFactory() {
delete resImage;
}
const QMimeSource* data( const QString& abs_name ) const
{
const QMimeSource * r = QMimeSourceFactory::data( abs_name );
if ( !r ) {
int sl = abs_name.length();
do {
sl = abs_name.findRev( '/', sl - 1 );
QString name = sl >= 0 ? abs_name.mid( sl + 1 ) : abs_name;
int dot = name.findRev( '.' );
if ( dot >= 0 )
name = name.left( dot );
QImage img = Resource::loadImage( name );
if ( !img.isNull() ) {
delete resImage;
resImage = new QImageDrag( img );
r = resImage;
}
}
while ( !r && sl > 0 );
}
return r;
}
private:
mutable QImageDrag *resImage;
};
+static int& hack(int& i)
+{
+#if QT_VERSION <= 230 && defined(QT_NO_CODECS)
+ // These should be created, but aren't in Qt 2.3.0
+ (void)new QUtf8Codec;
+ (void)new QUtf16Codec;
+#endif
+ return i;
+}
+
static int muted = 0;
static int micMuted = 0;
static void setVolume( int t = 0, int percent = -1 )
{
switch ( t ) {
case 0: {
Config cfg( "qpe" );
cfg.setGroup( "Volume" );
if ( percent < 0 )
percent = cfg.readNumEntry( "VolumePercent", 50 );
int fd = 0;
if ( ( fd = open( "/dev/mixer", O_RDWR ) ) >= 0 ) {
int vol = muted ? 0 : percent;
// set both channels to same volume
vol |= vol << 8;
ioctl( fd, MIXER_WRITE( 0 ), &vol );
::close( fd );
}
}
break;
}
}
static void setMic( int t = 0, int percent = -1 )
{
switch ( t ) {
case 0: {
Config cfg( "qpe" );
cfg.setGroup( "Volume" );
if ( percent < 0 )
percent = cfg.readNumEntry( "Mic", 50 );
int fd = 0;
int mic = micMuted ? 0 : percent;
if ( ( fd = open( "/dev/mixer", O_RDWR ) ) >= 0 ) {
ioctl( fd, MIXER_WRITE( SOUND_MIXER_MIC ), &mic );
::close( fd );
}
}
break;
}
}
static void setBass( int t = 0, int percent = -1 )
{
switch ( t ) {
case 0: {
Config cfg( "qpe" );
cfg.setGroup( "Volume" );
if ( percent < 0 )
percent = cfg.readNumEntry( "BassPercent", 50 );
int fd = 0;
int bass = percent;
if ( ( fd = open( "/dev/mixer", O_RDWR ) ) >= 0 ) {
ioctl( fd, MIXER_WRITE( SOUND_MIXER_BASS ), &bass );
::close( fd );
}
}
break;
}
}
static void setTreble( int t = 0, int percent = -1 )
{
switch ( t ) {
case 0: {
Config cfg( "qpe" );
cfg.setGroup( "Volume" );
if ( percent < 0 )
percent = cfg.readNumEntry( "TreblePercent", 50 );
int fd = 0;
int treble = percent;
if ( ( fd = open( "/dev/mixer", O_RDWR ) ) >= 0 ) {
ioctl( fd, MIXER_WRITE( SOUND_MIXER_TREBLE ), &treble );
::close( fd );
}
}
break;
}
}
/*!
\class QPEApplication qpeapplication.h
\brief The QPEApplication class implements various system services
that are available to all Qtopia applications.
Simply by using QPEApplication instead of QApplication, a standard Qt
application becomes a Qtopia application. It automatically follows
style changes, quits and raises, and in the
case of \link docwidget.html document-oriented\endlink applications,
changes the currently displayed document in response to the environment.
To create a \link docwidget.html document-oriented\endlink
application use showMainDocumentWidget(); to create a
non-document-oriented application use showMainWidget(). The
keepRunning() function indicates whether the application will
continue running after it's processed the last \link qcop.html
QCop\endlink message. This can be changed using setKeepRunning().
A variety of signals are emitted when certain events occur, for
example, timeChanged(), clockChanged(), weekChanged(),
dateFormatChanged() and volumeChanged(). If the application receives
a \link qcop.html QCop\endlink message on the application's
QPE/Application/\e{appname} channel, the appMessage() signal is
emitted. There are also flush() and reload() signals, which
are emitted when synching begins and ends respectively - upon these
signals, the application should save and reload any data
files that are involved in synching. Most of these signals will initially
be received and unfiltered through the appMessage() signal.
This class also provides a set of useful static functions. The
qpeDir() and documentDir() functions return the respective paths.
The grabKeyboard() and ungrabKeyboard() functions are used to
control whether the application takes control of the device's
physical buttons (e.g. application launch keys). The stylus' mode of
operation is set with setStylusOperation() and retrieved with
stylusOperation(). There are also setInputMethodHint() and
inputMethodHint() functions.
\ingroup qtopiaemb
*/
/*!
\fn void QPEApplication::clientMoused()
\internal
*/
/*!
\fn void QPEApplication::timeChanged();
This signal is emitted when the time changes outside the normal
passage of time, i.e. if the time is set backwards or forwards.
*/
/*!
\fn void QPEApplication::clockChanged( bool ampm );
This signal is emitted when the user changes the clock's style. If
\a ampm is TRUE, the user wants a 12-hour AM/PM clock, otherwise,
they want a 24-hour clock.
*/
/*!
\fn void QPEApplication::volumeChanged( bool muted )
This signal is emitted whenever the mute state is changed. If \a
muted is TRUE, then sound output has been muted.
*/
/*!
\fn void QPEApplication::weekChanged( bool startOnMonday )
This signal is emitted if the week start day is changed. If \a
startOnMonday is TRUE then the first day of the week is Monday; if
\a startOnMonday is FALSE then the first day of the week is
Sunday.
*/
/*!
\fn void QPEApplication::dateFormatChanged(DateFormat)
This signal is emitted whenever the date format is changed.
*/
/*!
\fn void QPEApplication::flush()
###
*/
/*!
\fn void QPEApplication::reload()
*/
+
+
+void QPEApplication::processQCopFile()
+{
+ QString qcopfn("/tmp/qcop-msg-");
+ qcopfn += d->appName; // append command name
+
+ QFile f(qcopfn);
+ if ( f.open(IO_ReadWrite) ) {
+#ifndef Q_OS_WIN32
+ flock(f.handle(), LOCK_EX);
+#endif
+ QDataStream ds(&f);
+ QCString channel, message;
+ QByteArray data;
+ while(!ds.atEnd()) {
+ ds >> channel >> message >> data;
+ d->enqueueQCop(channel,message,data);
+ }
+ ::ftruncate(f.handle(), 0);
+#ifndef Q_OS_WIN32
+ f.flush();
+ flock(f.handle(), LOCK_UN);
+#endif
+ }
+#endif
+}
+
+
/*!
\fn void QPEApplication::appMessage( const QCString& msg, const QByteArray& data )
This signal is emitted when a message is received on this
application's QPE/Application/<i>appname</i> \link qcop.html
QCop\endlink channel.
The slot to which you connect this signal uses \a msg and \a data
in the following way:
\code
void MyWidget::receive( const QCString& msg, const QByteArray& data )
{
QDataStream stream( data, IO_ReadOnly );
if ( msg == "someMessage(int,int,int)" ) {
int a,b,c;
stream >> a >> b >> c;
...
} else if ( msg == "otherMessage(QString)" ) {
...
}
}
\endcode
\sa qcop.html
Note that messages received here may be processed by qpe application
and emitted as signals, such as flush() and reload().
*/
/*!
Constructs a QPEApplication just as you would construct
a QApplication, passing \a argc, \a argv, and \a t.
For applications, \a t should be the default, GuiClient. Only
the Qtopia server passes GuiServer.
*/
QPEApplication::QPEApplication( int & argc, char **argv, Type t )
- : QApplication( argc, argv, t )
+ : QApplication( hack(argc), argv, t ), pidChannel( 0 )
{
d = new QPEApplicationData;
d->loadTextCodecs();
d->loadImageCodecs();
int dw = desktop() ->width();
if ( dw < 200 ) {
setFont( QFont( "vera", 8 ) );
AppLnk::setSmallIconSize( 10 );
AppLnk::setBigIconSize( 28 );
}
#ifndef QT_QWS_SIMPAD
else if ( dw > 600 ) {
setFont( QFont( "vera", 16 ) );
AppLnk::setSmallIconSize( 24 );
AppLnk::setBigIconSize( 48 );
}
#endif
else if ( dw > 200 ) {
setFont( QFont( "vera", 10 ) );
AppLnk::setSmallIconSize( 14 );
AppLnk::setBigIconSize( 32 );
}
QMimeSourceFactory::setDefaultFactory( new ResourceMimeFactory );
connect( this, SIGNAL( lastWindowClosed() ), this, SLOT( hideOrQuit() ) );
+
+
+ sysChannel = new QCopChannel( "QPE/System", this );
+ connect( sysChannel, SIGNAL( received( const QCString &, const QByteArray & ) ),
+ this, SLOT( systemMessage( const QCString &, const QByteArray & ) ) );
+
+/* COde now in initapp */
+#if 0
#if defined(Q_WS_QWS) && !defined(QT_NO_COP)
QString qcopfn( "/tmp/qcop-msg-" );
qcopfn += QString( argv[ 0 ] ); // append command name
QFile f( qcopfn );
if ( f.open( IO_ReadOnly ) ) {
flock( f.handle(), LOCK_EX );
}
- sysChannel = new QCopChannel( "QPE/System", this );
- connect( sysChannel, SIGNAL( received( const QCString &, const QByteArray & ) ),
- this, SLOT( systemMessage( const QCString &, const QByteArray & ) ) );
+
QCString channel = QCString( argv[ 0 ] );
channel.replace( QRegExp( ".*/" ), "" );
d->appName = channel;
channel = "QPE/Application/" + channel;
pidChannel = new QCopChannel( channel, this );
connect( pidChannel, SIGNAL( received( const QCString &, const QByteArray & ) ),
this, SLOT( pidMessage( const QCString &, const QByteArray & ) ) );
if ( f.isOpen() ) {
d->keep_running = FALSE;
QDataStream ds( &f );
QCString channel, message;
QByteArray data;
while ( !ds.atEnd() ) {
ds >> channel >> message >> data;
d->enqueueQCop( channel, message, data );
}
flock( f.handle(), LOCK_UN );
f.close();
f.remove();
}
for ( int a = 0; a < argc; a++ ) {
if ( qstrcmp( argv[ a ], "-preload" ) == 0 ) {
argv[ a ] = argv[ a + 1 ];
a++;
d->preloaded = TRUE;
argc -= 1;
}
else if ( qstrcmp( argv[ a ], "-preload-show" ) == 0 ) {
argv[ a ] = argv[ a + 1 ];
a++;
d->preloaded = TRUE;
d->forceshow = TRUE;
argc -= 1;
}
}
/* overide stored arguments */
setArgs( argc, argv );
#endif
-
+#else
+ initApp( argc, argv );
+#endif
// qwsSetDecoration( new QPEDecoration() );
#ifndef QT_NO_TRANSLATION
QStringList langs = Global::languageList();
for ( QStringList::ConstIterator it = langs.begin(); it != langs.end(); ++it ) {
QString lang = *it;
installTranslation( lang + "/libopie.qm");
installTranslation( lang + "/libqpe.qm" );
installTranslation( lang + "/" + d->appName + ".qm" );
//###language/font hack; should look it up somewhere
#ifdef QWS
if ( lang == "ja" || lang == "zh_CN" || lang == "zh_TW" || lang == "ko" ) {
QFont fn = FontManager::unicodeFont( FontManager::Proportional );
setFont( fn );
}
#endif
-
}
#endif
applyStyle();
if ( type() == GuiServer ) {
setVolume();
}
installEventFilter( this );
QPEMenuToolFocusManager::initialize();
#ifdef QT_NO_QWS_CURSOR
// if we have no cursor, probably don't want tooltips
QToolTip::setEnabled( FALSE );
#endif
}
+
+#ifdef QTOPIA_INTERNAL_INITAPP
+void QPEApplication::initApp( int argc, char **argv )
+{
+ delete pidChannel;
+ d->keep_running = TRUE;
+ d->preloaded = FALSE;
+ d->forceshow = FALSE;
+
+ QCString channel = QCString(argv[0]);
+
+ channel.replace(QRegExp(".*/"),"");
+ d->appName = channel;
+
+ qt_fbdpy->setIdentity( channel ); // In Qt/E 2.3.6
+
+ channel = "QPE/Application/" + channel;
+ pidChannel = new QCopChannel( channel, this);
+ connect( pidChannel, SIGNAL(received(const QCString &, const QByteArray &)),
+ this, SLOT(pidMessage(const QCString &, const QByteArray &)));
+
+ processQCopFile();
+ d->keep_running = d->qcopq.isEmpty();
+
+ for (int a=0; a<argc; a++) {
+ if ( qstrcmp(argv[a],"-preload")==0 ) {
+ argv[a] = argv[a+1];
+ a++;
+ d->preloaded = TRUE;
+ argc-=1;
+ } else if ( qstrcmp(argv[a],"-preload-show")==0 ) {
+ argv[a] = argv[a+1];
+ a++;
+ d->preloaded = TRUE;
+ d->forceshow = TRUE;
+ argc-=1;
+ }
+ }
+
+ /* overide stored arguments */
+ setArgs(argc, argv);
+}
+#endif
+
+
static QPtrDict<void>* inputMethodDict = 0;
static void createInputMethodDict()
{
if ( !inputMethodDict )
inputMethodDict = new QPtrDict<void>;
}
/*!
Returns the currently set hint to the system as to whether
widget \a w has any use for text input methods.
\sa setInputMethodHint() InputMethodHint
*/
QPEApplication::InputMethodHint QPEApplication::inputMethodHint( QWidget * w )
{
if ( inputMethodDict && w )
return ( InputMethodHint ) ( int ) inputMethodDict->find( w );
return Normal;
}
/*!
\enum QPEApplication::InputMethodHint
\value Normal the application sometimes needs text input (the default).
\value AlwaysOff the application never needs text input.
\value AlwaysOn the application always needs text input.
*/
/*!
Hints to the system that widget \a w has use for text input methods
as specified by \a mode.
\sa inputMethodHint() InputMethodHint
*/
void QPEApplication::setInputMethodHint( QWidget * w, InputMethodHint mode )
{
createInputMethodDict();
if ( mode == Normal ) {
inputMethodDict->remove
( w );
}
else {
inputMethodDict->insert( w, ( void* ) mode );
}
}
class HackDialog : public QDialog
{
public:
void acceptIt()
{
accept();
}
void rejectIt()
{
reject();
}
};
void QPEApplication::mapToDefaultAction( QWSKeyEvent * ke, int key )
{
// specialised actions for certain widgets. May want to
// add more stuff here.
if ( activePopupWidget() && activePopupWidget() ->inherits( "QListBox" )
&& activePopupWidget() ->parentWidget()
&& activePopupWidget() ->parentWidget() ->inherits( "QComboBox" ) )
key = Qt::Key_Return;
if ( activePopupWidget() && activePopupWidget() ->inherits( "QPopupMenu" ) )
key = Qt::Key_Return;
#ifdef QWS
ke->simpleData.keycode = key;
#endif
}
class HackWidget : public QWidget
{
public:
bool needsOk()
{
return ( getWState() & WState_Reserved1 );
}
};
/*!
\internal
*/
#ifdef QWS
bool QPEApplication::qwsEventFilter( QWSEvent * e )
{
if ( !d->notbusysent && e->type == QWSEvent::Focus ) {
if ( qApp->type() != QApplication::GuiServer ) {
QCopEnvelope e( "QPE/System", "notBusy(QString)" );
e << d->appName;
}
d->notbusysent = TRUE;
}
if ( type() == GuiServer ) {
switch ( e->type ) {
case QWSEvent::Mouse:
if ( e->asMouse() ->simpleData.state && !QWidget::find( e->window() ) )
emit clientMoused();
break;
default:
break;
}
}
if ( e->type == QWSEvent::Key ) {
QWSKeyEvent *ke = ( QWSKeyEvent * ) e;
if ( ke->simpleData.keycode == Qt::Key_F33 ) {
// Use special "OK" key to press "OK" on top level widgets
QWidget * active = activeWindow();
QWidget *popup = 0;
if ( active && active->isPopup() ) {
popup = active;
active = active->parentWidget();
}
if ( active && ( int ) active->winId() == ke->simpleData.window &&
!active->testWFlags( WStyle_Customize | WType_Popup | WType_Desktop ) ) {
if ( ke->simpleData.is_press ) {
if ( popup )
popup->close();
if ( active->inherits( "QDialog" ) ) {
HackDialog * d = ( HackDialog * ) active;
d->acceptIt();
return TRUE;
}
else if ( ( ( HackWidget * ) active ) ->needsOk() ) {
QSignal s;
s.connect( active, SLOT( accept() ) );
s.activate();
}
else {
// do the same as with the select key: Map to the default action of the widget:
mapToDefaultAction( ke, Qt::Key_Return );
}
}
}
}
else if ( ke->simpleData.keycode == Qt::Key_F30 ) {
// Use special "select" key to do whatever default action a widget has
mapToDefaultAction( ke, Qt::Key_Space );
}
else if ( ke->simpleData.keycode == Qt::Key_Escape &&
ke->simpleData.is_press ) {
// Escape key closes app if focus on toplevel
QWidget * active = activeWindow();
if ( active && active->testWFlags( WType_TopLevel ) &&
( int ) active->winId() == ke->simpleData.window &&
!active->testWFlags( WStyle_Dialog | WStyle_Customize | WType_Popup | WType_Desktop ) ) {
if ( active->inherits( "QDialog" ) ) {
HackDialog * d = ( HackDialog * ) active;
d->rejectIt();
return TRUE;
}
else if ( strcmp( argv() [ 0 ], "embeddedkonsole" ) != 0 ) {
active->close();
}
}
}
else if ( ke->simpleData.keycode >= Qt::Key_F1 && ke->simpleData.keycode <= Qt::Key_F29 ) {
// this should be if ( ODevice::inst ( )-> buttonForKeycode ( ... ))
// but we cannot access libopie function within libqpe :(
QWidget * active = activeWindow ( );
if ( active && ((int) active-> winId ( ) == ke-> simpleData.window )) {
if ( d-> kbgrabbed ) { // we grabbed the keyboard
QChar ch ( ke-> simpleData.unicode );
QKeyEvent qke ( ke-> simpleData. is_press ? QEvent::KeyPress : QEvent::KeyRelease,
ke-> simpleData.keycode,
ch. latin1 ( ),
ke-> simpleData.modifiers,
QString ( ch ),
ke-> simpleData.is_auto_repeat, 1 );
QObject *which = QWidget::keyboardGrabber ( );
if ( !which )
which = QApplication::focusWidget ( );
if ( !which )
which = QApplication::activeWindow ( );
if ( !which )
which = qApp;
QApplication::sendEvent ( which, &qke );
}
else { // we didn't grab the keyboard, so send the event to the launcher
QCopEnvelope e ( "QPE/Launcher", "deviceButton(int,int,int)" );
e << int( ke-> simpleData.keycode ) << int( ke-> simpleData. is_press ) << int( ke-> simpleData.is_auto_repeat );
}
}
return true;
}
}
if ( e->type == QWSEvent::Focus ) {
QWSFocusEvent * fe = ( QWSFocusEvent* ) e;
if ( !fe->simpleData.get_focus ) {
QWidget * active = activeWindow();
while ( active && active->isPopup() ) {
active->close();
active = activeWindow();
}
}
else {
// make sure our modal widget is ALWAYS on top
QWidget *topm = activeModalWidget();
if ( topm ) {
topm->raise();
}
}
if ( fe->simpleData.get_focus && inputMethodDict ) {
InputMethodHint m = inputMethodHint( QWidget::find( e->window() ) );
if ( m == AlwaysOff )
Global::hideInputMethod();
if ( m == AlwaysOn )
Global::showInputMethod();
}
}
return QApplication::qwsEventFilter( e );
}
#endif
/*!
Destroys the QPEApplication.
*/
QPEApplication::~QPEApplication()
{
ungrabKeyboard();
#if defined(Q_WS_QWS) && !defined(QT_NO_COP)
// Need to delete QCopChannels early, since the display will
// be gone by the time we get to ~QObject().
delete sysChannel;
delete pidChannel;
#endif
delete d;
}
/*!
Returns <tt>$OPIEDIR/</tt>.
*/
QString QPEApplication::qpeDir()
{
const char * base = getenv( "OPIEDIR" );
if ( base )
return QString( base ) + "/";
return QString( "../" );
}
/*!
Returns the user's current Document directory. There is a trailing "/".
.. well, it does now,, and there's no trailing '/'
*/
QString QPEApplication::documentDir()
{
const char* base = getenv( "HOME");
if ( base )
return QString( base ) + "/Documents";
return QString( "../Documents" );
}
static int deforient = -1;
/*!
\internal
*/
int QPEApplication::defaultRotation()
{
if ( deforient < 0 ) {
QString d = getenv( "QWS_DISPLAY" );
if ( d.contains( "Rot90" ) ) {
deforient = 90;
}
else if ( d.contains( "Rot180" ) ) {
deforient = 180;
}
else if ( d.contains( "Rot270" ) ) {
deforient = 270;
}
else {
deforient = 0;
}
}
return deforient;
}
/*!
\internal
*/
void QPEApplication::setDefaultRotation( int r )
{
if ( qApp->type() == GuiServer ) {
deforient = r;
setenv( "QWS_DISPLAY", QString( "Transformed:Rot%1:0" ).arg( r ).latin1(), 1 );
Config config("qpe");
config.setGroup( "Rotation" );
config.writeEntry( "Rot", r );
}
else {
#ifndef QT_NO_COP
{ QCopEnvelope e( "QPE/System", "setDefaultRotation(int)" );
e << r;
}
#endif
}
}
/*!
\internal
*/
void QPEApplication::applyStyle()
{
Config config( "qpe" );
config.setGroup( "Appearance" );
#if QT_VERSION > 233
// don't block ourselves ...
Opie::force_appearance = 0;
static QString appname = Opie::binaryName ( );
QStringList ex = config. readListEntry ( "NoStyle", ';' );
int nostyle = 0;
for ( QStringList::Iterator it = ex. begin ( ); it != ex. end ( ); ++it ) {
if ( QRegExp (( *it ). mid ( 1 ), false, true ). find ( appname, 0 ) >= 0 ) {
nostyle = ( *it ). left ( 1 ). toInt ( 0, 32 );
break;
}
}
// Widget style
QString style = config.readEntry( "Style", "FlatStyle" );
// don't set a custom style
if ( nostyle & Opie::Force_Style )
style = "FlatStyle";
internalSetStyle ( style );
// Colors - from /etc/colors/Liquid.scheme
QColor bgcolor( config.readEntry( "Background", "#E0E0E0" ) );
QColor btncolor( config.readEntry( "Button", "#96c8fa" ) );
QPalette pal( btncolor, bgcolor );
QString color = config.readEntry( "Highlight", "#73adef" );
pal.setColor( QColorGroup::Highlight, QColor( color ) );
color = config.readEntry( "HighlightedText", "#FFFFFF" );
pal.setColor( QColorGroup::HighlightedText, QColor( color ) );
color = config.readEntry( "Text", "#000000" );
pal.setColor( QColorGroup::Text, QColor( color ) );
color = config.readEntry( "ButtonText", "#000000" );
pal.setColor( QPalette::Active, QColorGroup::ButtonText, QColor( color ) );
color = config.readEntry( "Base", "#FFFFFF" );
pal.setColor( QColorGroup::Base, QColor( color ) );
pal.setColor( QPalette::Disabled, QColorGroup::Text,
pal.color( QPalette::Active, QColorGroup::Background ).dark() );
setPalette( pal, TRUE );
// Window Decoration
QString dec = config.readEntry( "Decoration", "Flat" );
// don't set a custom deco
if ( nostyle & Opie::Force_Decoration )
dec = "";
//qDebug ( "Setting Deco: %s -- old %s (%d)", dec.latin1(), d-> decorationName.latin1(), nostyle);
if ( dec != d->decorationName ) {
qwsSetDecoration( new QPEDecoration( dec ) );
d->decorationName = dec;
}
// Font
QString ff = config.readEntry( "FontFamily", font().family() );
int fs = config.readNumEntry( "FontSize", font().pointSize() );
// don't set a custom font
if ( nostyle & Opie::Force_Font ) {
ff = "Vera";
fs = 10;
}
setFont ( QFont ( ff, fs ), true );
// revert to global blocking policy ...
Opie::force_appearance = config. readBoolEntry ( "ForceStyle", false ) ? Opie::Force_All : Opie::Force_None;
Opie::force_appearance &= ~nostyle;
#endif
}
void QPEApplication::systemMessage( const QCString& msg, const QByteArray& data )
{
#ifdef Q_WS_QWS
QDataStream stream( data, IO_ReadOnly );
if ( msg == "applyStyle()" ) {
applyStyle();
}
else if ( msg == "toggleApplicationMenu()" ) {
QWidget *active = activeWindow ( );
if ( active ) {
QPEMenuToolFocusManager *man = QPEMenuToolFocusManager::manager ( );
bool oldactive = man-> isActive ( );
man-> setActive( !man-> isActive() );
if ( !oldactive && !man-> isActive ( )) { // no menubar to toggle -> try O-Menu
QCopEnvelope e ( "QPE/TaskBar", "toggleStartMenu()" );
}
}
}
else if ( msg == "setDefaultRotation(int)" ) {
if ( type() == GuiServer ) {
int r;
stream >> r;
setDefaultRotation( r );
}
}
else if ( msg == "setCurrentRotation(int)" ) {
int r;
stream >> r;
setCurrentRotation( r );
}
else if ( msg == "shutdown()" ) {
if ( type() == GuiServer )
shutdown();
}
else if ( msg == "quit()" ) {
if ( type() != GuiServer )
tryQuit();
}
else if ( msg == "forceQuit()" ) {
if ( type() != GuiServer )
quit();
}
else if ( msg == "restart()" ) {
if ( type() == GuiServer )
restart();
}
else if ( msg == "language(QString)" ) {
if ( type() == GuiServer ) {
QString l;
stream >> l;
QString cl = getenv( "LANG" );
if ( cl != l ) {
if ( l.isNull() )
unsetenv( "LANG" );
else
setenv( "LANG", l.latin1(), 1 );
restart();
}
}
}
else if ( msg == "timeChange(QString)" ) {
QString t;
stream >> t;
if ( t.isNull() )
unsetenv( "TZ" );
else
setenv( "TZ", t.latin1(), 1 );
// emit the signal so everyone else knows...
emit timeChanged();
}
- else if ( msg == "execute(QString)" ) {
- if ( type() == GuiServer ) {
- QString t;
- stream >> t;
- Global::execute( t );
- }
- }
- else if ( msg == "execute(QString,QString)" ) {
- if ( type() == GuiServer ) {
- QString t, d;
- stream >> t >> d;
- Global::execute( t, d );
- }
- }
else if ( msg == "addAlarm(QDateTime,QCString,QCString,int)" ) {
if ( type() == GuiServer ) {
QDateTime when;
QCString channel, message;
int data;
stream >> when >> channel >> message >> data;
AlarmServer::addAlarm( when, channel, message, data );
}
}
else if ( msg == "deleteAlarm(QDateTime,QCString,QCString,int)" ) {
if ( type() == GuiServer ) {
QDateTime when;
QCString channel, message;
int data;
stream >> when >> channel >> message >> data;
AlarmServer::deleteAlarm( when, channel, message, data );
}
}
else if ( msg == "clockChange(bool)" ) {
int tmp;
stream >> tmp;
emit clockChanged( tmp );
}
else if ( msg == "weekChange(bool)" ) {
int tmp;
stream >> tmp;
emit weekChanged( tmp );
}
else if ( msg == "setDateFormat(DateFormat)" ) {
DateFormat tmp;
stream >> tmp;
emit dateFormatChanged( tmp );
}
else if ( msg == "setVolume(int,int)" ) {
int t, v;
stream >> t >> v;
setVolume( t, v );
emit volumeChanged( muted );
}
else if ( msg == "volumeChange(bool)" ) {
stream >> muted;
setVolume();
emit volumeChanged( muted );
}
else if ( msg == "setMic(int,int)" ) { // Added: 2002-02-08 by Jeremy Cowgar <jc@cowgar.com>
int t, v;
stream >> t >> v;
setMic( t, v );
emit micChanged( micMuted );
}
else if ( msg == "micChange(bool)" ) { // Added: 2002-02-08 by Jeremy Cowgar <jc@cowgar.com>
stream >> micMuted;
setMic();
emit micChanged( micMuted );
}
else if ( msg == "setBass(int,int)" ) { // Added: 2002-12-13 by Maximilian Reiss <harlekin@handhelds.org>
int t, v;
stream >> t >> v;
setBass( t, v );
}
else if ( msg == "bassChange(bool)" ) { // Added: 2002-12-13 by Maximilian Reiss <harlekin@handhelds.org>
setBass();
}
else if ( msg == "setTreble(int,int)" ) { // Added: 2002-12-13 by Maximilian Reiss <harlekin@handhelds.org>
int t, v;
stream >> t >> v;
setTreble( t, v );
}
else if ( msg == "trebleChange(bool)" ) { // Added: 2002-12-13 by Maximilian Reiss <harlekin@handhelds.org>
setTreble();
+ } else if ( msg == "getMarkedText()" ) {
+ if ( type() == GuiServer ) {
+ const ushort unicode = 'C'-'@';
+ const int scan = Key_C;
+ qwsServer->processKeyEvent( unicode, scan, ControlButton, TRUE, FALSE );
+ qwsServer->processKeyEvent( unicode, scan, ControlButton, FALSE, FALSE );
+ }
+ } else if ( msg == "newChannel(QString)") {
+ QString myChannel = "QPE/Application/" + d->appName;
+ QString channel;
+ stream >> channel;
+ if (channel == myChannel) {
+ processQCopFile();
+ d->sendQCopQ();
+ }
}
-
#endif
}
/*!
\internal
*/
bool QPEApplication::raiseAppropriateWindow()
{
bool r = FALSE;
// ########## raise()ing main window should raise and set active
// ########## it and then all childen. This belongs in Qt/Embedded
QWidget *top = d->qpe_main_widget;
if ( !top )
top = mainWidget();
if ( top && d->keep_running ) {
if ( top->isVisible() )
r = TRUE;
else if (d->preloaded) {
// We are preloaded and not visible.. pretend we just started..
QCopEnvelope e("QPE/System", "fastAppShowing(QString)");
e << d->appName;
}
d->show_mx(top, d->nomaximize);
top->raise();
top->setActiveWindow();
}
QWidget *topm = activeModalWidget();
if ( topm && topm != top ) {
topm->show();
topm->raise();
topm->setActiveWindow();
// If we haven't already handled the fastAppShowing message
if (!top && d->preloaded) {
QCopEnvelope e("QPE/System", "fastAppShowing(QString)");
e << d->appName;
}
r = FALSE;
}
return r;
}
void QPEApplication::pidMessage( const QCString& msg, const QByteArray& data)
{
#ifdef Q_WS_QWS
if ( msg == "quit()" ) {
tryQuit();
}
else if ( msg == "quitIfInvisible()" ) {
if ( d->qpe_main_widget && !d->qpe_main_widget->isVisible() )
quit();
}
else if ( msg == "close()" ) {
hideOrQuit();
}
else if ( msg == "disablePreload()" ) {
d->preloaded = FALSE;
d->keep_running = TRUE;
/* so that quit will quit */
}
else if ( msg == "enablePreload()" ) {
if (d->qpe_main_widget)
d->preloaded = TRUE;
d->keep_running = TRUE;
/* so next quit won't quit */
}
else if ( msg == "raise()" ) {
d->keep_running = TRUE;
d->notbusysent = FALSE;
raiseAppropriateWindow();
// Tell the system we're still chugging along...
QCopEnvelope e("QPE/System", "appRaised(QString)");
e << d->appName;
}
else if ( msg == "flush()" ) {
emit flush();
// we need to tell the desktop
QCopEnvelope e( "QPE/Desktop", "flushDone(QString)" );
e << d->appName;
}
else if ( msg == "reload()" ) {
emit reload();
}
else if ( msg == "setDocument(QString)" ) {
d->keep_running = TRUE;
QDataStream stream( data, IO_ReadOnly );
QString doc;
stream >> doc;
QWidget *mw = mainWidget();
if ( !mw )
mw = d->qpe_main_widget;
if ( mw )
Global::setDocument( mw, doc );
- } else {
+ } else if ( msg == "QPEProcessQCop()" ) {
+ processQCopFile();
+ d->sendQCopQ();
+ }
+ {
bool p = d->keep_running;
d->keep_running = FALSE;
emit appMessage( msg, data);
if ( d->keep_running ) {
d->notbusysent = FALSE;
raiseAppropriateWindow();
if ( !p ) {
// Tell the system we're still chugging along...
#ifndef QT_NO_COP
QCopEnvelope e("QPE/System", "appRaised(QString)");
e << d->appName;
#endif
}
}
if ( p )
d->keep_running = p;
}
#endif
}
/*!
Sets widget \a mw as the mainWidget() and shows it. For small windows,
consider passing TRUE for \a nomaximize rather than the default FALSE.
\sa showMainDocumentWidget()
*/
void QPEApplication::showMainWidget( QWidget* mw, bool nomaximize )
{
d->show(mw, nomaximize );
}
/*!
Sets widget \a mw as the mainWidget() and shows it. For small windows,
consider passing TRUE for \a nomaximize rather than the default FALSE.
This calls designates the application as
a \link docwidget.html document-oriented\endlink application.
The \a mw widget \e must have this slot: setDocument(const QString&).
\sa showMainWidget()
*/
void QPEApplication::showMainDocumentWidget( QWidget* mw, bool nomaximize )
{
if ( mw && argc() == 2 )
Global::setDocument( mw, QString::fromUtf8(argv()[1]) );
d->show(mw, nomaximize );
}
/*!
If an application is started via a \link qcop.html QCop\endlink
message, the application will process the \link qcop.html
QCop\endlink message and then quit. If the application calls this
function while processing a \link qcop.html QCop\endlink message,
after processing its outstanding \link qcop.html QCop\endlink
messages the application will start 'properly' and show itself.
\sa keepRunning()
*/
void QPEApplication::setKeepRunning()
{
if ( qApp && qApp->inherits( "QPEApplication" ) ) {
QPEApplication * qpeApp = ( QPEApplication* ) qApp;
qpeApp->d->keep_running = TRUE;
}
}
/*!
Returns TRUE if the application will quit after processing the
current list of qcop messages; otherwise returns FALSE.
\sa setKeepRunning()
*/
bool QPEApplication::keepRunning() const
{
return d->keep_running;
}
/*!
\internal
*/
void QPEApplication::internalSetStyle( const QString &style )
{
#if QT_VERSION >= 300
if ( style == "QPE" ) {
setStyle( new QPEStyle );
}
else {
QStyle *s = QStyleFactory::create( style );
if ( s )
setStyle( s );
}
#else
if ( style == "Windows" ) {
setStyle( new QWindowsStyle );
}
else if ( style == "QPE" ) {
setStyle( new QPEStyle );
}
else if ( style == "Light" ) {
setStyle( new LightStyle );
}
#ifndef QT_NO_STYLE_PLATINUM
else if ( style == "Platinum" ) {
setStyle( new QPlatinumStyle );
}
#endif
#ifndef QT_NO_STYLE_MOTIF
else if ( style == "Motif" ) {
setStyle( new QMotifStyle );
}
#endif
#ifndef QT_NO_STYLE_MOTIFPLUS
else if ( style == "MotifPlus" ) {
setStyle( new QMotifPlusStyle );
}
#endif
else {
QStyle *sty = 0;
QString path = QPEApplication::qpeDir ( ) + "/plugins/styles/";
if ( style. find ( ".so" ) > 0 )
path += style;
else
path = path + "lib" + style. lower ( ) + ".so"; // compatibility
static QLibrary *lastlib = 0;
static StyleInterface *lastiface = 0;
QLibrary *lib = new QLibrary ( path );
StyleInterface *iface = 0;
if (( lib-> queryInterface ( IID_Style, ( QUnknownInterface ** ) &iface ) == QS_OK ) && iface )
sty = iface-> style ( );
if ( sty ) {
setStyle ( sty );
if ( lastiface )
lastiface-> release ( );
lastiface = iface;
if ( lastlib ) {
lastlib-> unload ( );
delete lastlib;
}
lastlib = lib;
}
else {
if ( iface )
iface-> release ( );
delete lib;
setStyle ( new LightStyle ( ));
}
}
#endif
}
/*!
\internal
*/
void QPEApplication::prepareForTermination( bool willrestart )
{
if ( willrestart ) {
// Draw a big wait icon, the image can be altered in later revisions
// QWidget *d = QApplication::desktop();
QImage img = Resource::loadImage( "launcher/new_wait" );
QPixmap pix;
pix.convertFromImage( img.smoothScale( 1 * img.width(), 1 * img.height() ) );
QLabel *lblWait = new QLabel( 0, "wait hack!", QWidget::WStyle_Customize |
QWidget::WStyle_NoBorder | QWidget::WStyle_Tool );
lblWait->setPixmap( pix );
lblWait->setAlignment( QWidget::AlignCenter );
lblWait->show();
lblWait->showMaximized();
}
#ifndef SINGLE_APP
{ QCopEnvelope envelope( "QPE/System", "forceQuit()" );
}
processEvents(); // ensure the message goes out.
sleep( 1 ); // You have 1 second to comply.
#endif
}
/*!
\internal
*/
void QPEApplication::shutdown()
{
// Implement in server's QPEApplication subclass
}
/*!
\internal
*/
void QPEApplication::restart()
{
// Implement in server's QPEApplication subclass
}
static QPtrDict<void>* stylusDict = 0;
static void createDict()
{
if ( !stylusDict )
stylusDict = new QPtrDict<void>;
}
/*!
Returns the current StylusMode for widget \a w.
\sa setStylusOperation() StylusMode
*/
QPEApplication::StylusMode QPEApplication::stylusOperation( QWidget* w )
{
if ( stylusDict )
return ( StylusMode ) ( int ) stylusDict->find( w );
return LeftOnly;
}
/*!
\enum QPEApplication::StylusMode
\value LeftOnly the stylus only generates LeftButton
events (the default).
\value RightOnHold the stylus generates RightButton events
if the user uses the press-and-hold gesture.
\sa setStylusOperation() stylusOperation()
*/
/*!
Causes widget \a w to receive mouse events according to the stylus
\a mode.
\sa stylusOperation() StylusMode
*/
void QPEApplication::setStylusOperation( QWidget * w, StylusMode mode )
{
createDict();
if ( mode == LeftOnly ) {
stylusDict->remove
( w );
w->removeEventFilter( qApp );
}
else {
stylusDict->insert( w, ( void* ) mode );
connect( w, SIGNAL( destroyed() ), qApp, SLOT( removeSenderFromStylusDict() ) );
w->installEventFilter( qApp );
}
}
/*!
\reimp
*/
bool QPEApplication::eventFilter( QObject *o, QEvent *e )
{
if ( stylusDict && e->type() >= QEvent::MouseButtonPress && e->type() <= QEvent::MouseMove ) {
QMouseEvent * me = ( QMouseEvent* ) e;
StylusMode mode = (StylusMode)(int)stylusDict->find(o);
switch (mode) {
case RightOnHold:
switch ( me->type() ) {
case QEvent::MouseButtonPress:
if ( me->button() == LeftButton ) {
d->presstimer = startTimer(500); // #### pref.
d->presswidget = (QWidget*)o;
d->presspos = me->pos();
d->rightpressed = FALSE;
}
break;
case QEvent::MouseMove:
if (d->presstimer && (me->pos() - d->presspos).manhattanLength() > 8) {
killTimer(d->presstimer);
d->presstimer = 0;
}
break;
case QEvent::MouseButtonRelease:
if ( me->button() == LeftButton ) {
if ( d->presstimer ) {
killTimer(d->presstimer);
d->presstimer = 0;
}
if ( d->rightpressed && d->presswidget ) {
// Right released
postEvent( d->presswidget,
new QMouseEvent( QEvent::MouseButtonRelease, me->pos(),
RightButton, LeftButton + RightButton ) );
// Left released, off-widget
postEvent( d->presswidget,
new QMouseEvent( QEvent::MouseMove, QPoint( -1, -1),
LeftButton, LeftButton ) );
postEvent( d->presswidget,
new QMouseEvent( QEvent::MouseButtonRelease, QPoint( -1, -1),
LeftButton, LeftButton ) );
d->rightpressed = FALSE;
return TRUE; // don't send the real Left release
}
}
break;
default:
break;
}
break;
default:
;
}
}
else if ( e->type() == QEvent::KeyPress || e->type() == QEvent::KeyRelease ) {
QKeyEvent *ke = (QKeyEvent *)e;
if ( ke->key() == Key_Enter ) {
if ( o->isA( "QRadioButton" ) || o->isA( "QCheckBox" ) ) {
postEvent( o, new QKeyEvent( e->type(), Key_Space, ' ',
ke->state(), " ", ke->isAutoRepeat(), ke->count() ) );
return TRUE;
}
}
}
return FALSE;
}
/*!
\reimp
*/
void QPEApplication::timerEvent( QTimerEvent *e )
{
if ( e->timerId() == d->presstimer && d->presswidget ) {
// Right pressed
postEvent( d->presswidget,
new QMouseEvent( QEvent::MouseButtonPress, d->presspos,
RightButton, LeftButton ) );
killTimer( d->presstimer );
d->presstimer = 0;
d->rightpressed = TRUE;
}
}
void QPEApplication::removeSenderFromStylusDict()
{
stylusDict->remove
( ( void* ) sender() );
if ( d->presswidget == sender() )
d->presswidget = 0;
}
/*!
\internal
*/
bool QPEApplication::keyboardGrabbed() const
{
return d->kbgrabbed;
}
/*!
Reverses the effect of grabKeyboard(). This is called automatically
on program exit.
*/
void QPEApplication::ungrabKeyboard()
{
((QPEApplication *) qApp )-> d-> kbgrabbed = false;
}
/*!
Grabs the physical keyboard keys, e.g. the application's launching
keys. Instead of launching applications when these keys are pressed
the signals emitted are sent to this application instead. Some games
programs take over the launch keys in this way to make interaction
easier.
\sa ungrabKeyboard()
*/
void QPEApplication::grabKeyboard()
{
((QPEApplication *) qApp )-> d-> kbgrabbed = true;
}
/*!
\reimp
*/
int QPEApplication::exec()
{
#ifndef QT_NO_COP
d->sendQCopQ();
#endif
if ( d->keep_running )
//|| d->qpe_main_widget && d->qpe_main_widget->isVisible() )
return QApplication::exec();
#ifndef QT_NO_COP
{
QCopEnvelope e( "QPE/System", "closing(QString)" );
e << d->appName;
}
#endif
processEvents();
return 0;
}
/*!
\internal
External request for application to quit. Quits if possible without
loosing state.
*/
void QPEApplication::tryQuit()
{
if ( activeModalWidget() || strcmp( argv() [ 0 ], "embeddedkonsole" ) == 0 )
return ; // Inside modal loop or konsole. Too hard to save state.
#ifndef QT_NO_COP
{
QCopEnvelope e( "QPE/System", "closing(QString)" );
e << d->appName;
}
#endif
processEvents();
quit();
}
/*!
\internal
*/
void QPEApplication::installTranslation( const QString& baseName ) {
QTranslator* trans = new QTranslator(this);
QString tfn = qpeDir() + "/i18n/"+baseName;
if ( trans->load( tfn ) )
installTranslator( trans );
else
delete trans;
}
/*!
\internal
User initiated quit. Makes the window 'Go Away'. If preloaded this means
hiding the window. If not it means quitting the application.
As this is user initiated we don't need to check state.
*/
void QPEApplication::hideOrQuit()
{
processEvents();
// If we are a preloaded application we don't actually quit, so emit
// a System message indicating we're quasi-closing.
if ( d->preloaded && d->qpe_main_widget )
#ifndef QT_NO_COP
{
QCopEnvelope e("QPE/System", "fastAppHiding(QString)" );
e << d->appName;
d->qpe_main_widget->hide();
}
#endif
else
quit();
}
#if (__GNUC__ > 2 )
extern "C" void __cxa_pure_virtual();
void __cxa_pure_virtual()
{
fprintf( stderr, "Pure virtual called\n");
abort();
}
#endif
#if defined(QT_QWS_IPAQ) || defined(QT_QWS_SL5XXX) || defined(QT_QWS_RAMSES)
// The libraries with the skiff package (and possibly others) have
// completely useless implementations of builtin new and delete that
// use about 50% of your CPU. Here we revert to the simple libc
// functions.
void* operator new[]( size_t size )
{
return malloc( size );
}
void* operator new( size_t size )
{
return malloc( size );
}
void operator delete[]( void* p )
{
free( p );
}
void operator delete[]( void* p, size_t /*size*/ )
{
free( p );
}
void operator delete( void* p )
{
free( p );
}
void operator delete( void* p, size_t /*size*/ )
{
free( p );
}
#endif
#if ( QT_VERSION <= 230 ) && !defined(SINGLE_APP)
#include <qwidgetlist.h>
#ifdef QWS
#include <qgfx_qws.h>
extern QRect qt_maxWindowRect;
void qt_setMaxWindowRect(const QRect& r )
{
qt_maxWindowRect = qt_screen->mapFromDevice( r,
qt_screen->mapToDevice( QSize( qt_screen->width(), qt_screen->height() ) ) );
// Re-resize any maximized windows
QWidgetList* l = QApplication::topLevelWidgets();
if ( l ) {
QWidget * w = l->first();
while ( w ) {
if ( w->isVisible() && w->isMaximized() ) {
w->showMaximized();
}
w = l->next();
}
delete l;
}
}
#endif
#endif
diff --git a/library/qpeapplication.h b/library/qpeapplication.h
index 65a6d33..770ea23 100644
--- a/library/qpeapplication.h
+++ b/library/qpeapplication.h
@@ -1,198 +1,204 @@
/**********************************************************************
** Copyright (C) 2000-2002 Trolltech AS. All rights reserved.
**
** This file is part of the Qtopia Environment.
**
** This file may be distributed and/or modified under the terms of the
** GNU General Public License version 2 as published by the Free Software
** Foundation and appearing in the file LICENSE.GPL included in the
** packaging of this file.
**
** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
** WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
**
** See http://www.trolltech.com/gpl/ for GPL licensing information.
**
** Contact info@trolltech.com if any conditions of this licensing are
** not clear to you.
**
**********************************************************************/
#ifndef __QPE_APPLICATION_H__
#define __QPE_APPLICATION_H__
#include <stdlib.h> // for setenv()
#include <qglobal.h>
#include <qapplication.h>
#include <qdialog.h>
#include <qwsdisplay_qws.h>
#if defined(_WS_QWS_) && !defined(Q_WS_QWS)
#define Q_WS_QWS
#endif
#include "qpedecoration_qws.h"
#include "timestring.h"
class QCopChannel;
class QPEApplicationData;
class QWSEvent;
class QWSKeyEvent;
class QPEApplication : public QApplication
{
Q_OBJECT
public:
QPEApplication( int& argc, char **argv, Type=GuiClient );
~QPEApplication();
static QString qpeDir();
static QString documentDir();
void applyStyle();
static int defaultRotation();
static void setDefaultRotation(int r);
static void setCurrentRotation(int r);
static void grabKeyboard();
static void ungrabKeyboard();
enum StylusMode {
LeftOnly,
RightOnHold
// RightOnHoldLeftDelayed, etc.
};
static void setStylusOperation( QWidget*, StylusMode );
static StylusMode stylusOperation( QWidget* );
enum InputMethodHint {
Normal,
AlwaysOff,
AlwaysOn
};
enum screenSaverHint {
Disable = 0,
DisableLightOff = 1,
DisableSuspend = 2,
Enable = 100
};
static void setInputMethodHint( QWidget *, InputMethodHint );
static InputMethodHint inputMethodHint( QWidget * );
void showMainWidget( QWidget*, bool nomax=FALSE );
void showMainDocumentWidget( QWidget*, bool nomax=FALSE );
static void showDialog( QDialog*, bool nomax=FALSE );
static int execDialog( QDialog*, bool nomax=FALSE );
+ /* Merge setTempScreenSaverMode */
+#ifdef QTOPIA_INTERNAL_INITAPP
+ void initApp( int argv, char **argv );
+#endif
static void setKeepRunning();
bool keepRunning() const;
bool keyboardGrabbed() const;
int exec();
signals:
void clientMoused();
void timeChanged();
void clockChanged( bool pm );
void micChanged( bool muted );
void volumeChanged( bool muted );
void appMessage( const QCString& msg, const QByteArray& data);
void weekChanged( bool startOnMonday );
void dateFormatChanged( DateFormat );
void flush();
void reload();
+ /* linkChanged signal */
private slots:
void systemMessage( const QCString &msg, const QByteArray &data );
void pidMessage( const QCString &msg, const QByteArray &data );
void removeSenderFromStylusDict();
void hideOrQuit();
protected:
bool qwsEventFilter( QWSEvent * );
void internalSetStyle( const QString &style );
void prepareForTermination(bool willrestart);
virtual void restart();
virtual void shutdown();
bool eventFilter( QObject *, QEvent * );
void timerEvent( QTimerEvent * );
bool raiseAppropriateWindow();
virtual void tryQuit();
#if QT_VERSION > 233
virtual void polish ( QWidget * ); // this is actually implemented in qt_override.cpp (!)
#endif
private:
#ifndef QT_NO_TRANSLATION
void installTranslation( const QString& baseName );
#endif
void mapToDefaultAction( QWSKeyEvent *ke, int defKey );
+ void processQCopFile();
#if defined(Q_WS_QWS) && !defined(QT_NO_COP)
QCopChannel *sysChannel;
QCopChannel *pidChannel;
#endif
QPEApplicationData *d;
bool reserved_sh;
};
inline void QPEApplication::showDialog( QDialog* d, bool nomax )
{
QSize sh = d->sizeHint();
int w = QMAX(sh.width(),d->width());
int h = QMAX(sh.height(),d->height());
if ( !nomax
&& ( w > qApp->desktop()->width()*3/4
|| h > qApp->desktop()->height()*3/4 ) )
{
d->showMaximized();
} else {
d->resize(w,h);
d->show();
}
}
inline int QPEApplication::execDialog( QDialog* d, bool nomax )
{
showDialog(d,nomax);
return d->exec();
}
enum Transformation { Rot0, Rot90, Rot180, Rot270 }; /* from qgfxtransformed_qws.cpp */
inline int TransToDeg ( Transformation t )
{
int d = static_cast<int>( t );
return d * 90;
}
inline Transformation DegToTrans ( int d )
{
Transformation t = static_cast<Transformation>( d / 90 );
return t;
}
/*
* Set current rotation of Opie, and rotation for newly started apps.
* Differs from setDefaultRotation in that 1) it rotates currently running apps,
* and 2) does not set deforient or save orientation to qpe.conf.
*/
inline void QPEApplication::setCurrentRotation( int r )
{
// setTransformation has been introduced in Qt/Embedded 2.3.4 snapshots
// for compatibility with the SharpROM use fallback to setDefaultTransformation()
#if QT_VERSION > 233
Transformation e = DegToTrans( r );
setenv( "QWS_DISPLAY", QString( "Transformed:Rot%1:0" ).arg( r ).latin1(), 1 );
qApp->desktop()->qwsDisplay()->setTransformation( e );
#else
setDefaultRotation( r );
#endif
}
#endif