add support for the Sharp SL-C3100 "Borzoi"

4 files changed, 22 insertions, 11 deletions

diff --git a/ChangeLog b/ChangeLog
index aa546ba..cc3f1a5 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -9,69 +9,69 @@
 	* Wellenreiter: Remove Joining networks - use OpieStumbler for that (mickeyl)
 	* Opie-Mobilemsg has gone unsupported - it never really worked and there will be a replacement (mickeyl)
 	* Opie-Tabmanager has gone unsupported - it barely works and there is not much of a use of it anyway (mickeyl)
 	* Checkbook: Added configuration option to use smaller font for checkbook transaction tab (hrw)
 	* ZSafe: Made UI conform to Opie standards (drw)
 	* Today Addressbook plugin: Fixed configuration to show/not show birthdays, use checkboxes for selection (hrw)
 	* Opie-Console: Read initial fixed font configuration from qpe.conf (mickeyl)
 	* Opie-PcmciaApplet: Configure insert/resume actions and bind unsupported cards (mickeyl)
 	* SysInfo: Remove CPU tab and add Devices tab instead (mickeyl)
 	* Opie-smb: Added Opie front end for Samba (ljp)
 	* Opie-Bluetooth: Replace obex send implementation and patch libopieobex and the bluetoothapplet (Michael Haynie)
 
-
 	Fixed Bugs
 	----------
 	* #1377 - Suspend Powermanagement when switched to another VT (mickeyl)
 	        - We actually suspend the complete Opie now in that case.
 	* #1384 - Battery status updated improperly when charging (skyhusker)
 	* #1476 - Wrong order of application entries in the O-menu (skyhusker)
 	* #1514 - Remove usage of cardmon/pcmcia picture in applications. pcmcia is now an inline picture (mickeyl)
 	* #1535	- Missing line break and unnecessary location shown with Today-Calendar plugin (deller)
 	* #1543 - Time Settings: "predict" tab is displayed twice after reopen (hrw)
 	* #1546 - Battery applet popup is not always large enough to show jacket remaining info (skyhusker)
 	* #1557 - Light&Power-Settings don't store warning intervall and warning levels (skyhusker)
 	* #1565 - crash-fix in odevice.cpp while scanning the distribution table (deller)
 	* #1614 - Make Opie-console start in $HOME instead of / (skyhusker)
 	* #1635 - opie-today, datebook-plugin does not show notes (skyhusker)
 	* #1665 - Opie-IRC displays the host prepended to the message when peer is using and ipv6 address (skyhusker)
 	* #1666 - Opie-IRC does not allow to add !channels in config as	autojoin ones (skyhusker)
 	* #1667 - Opie-IRC does not show messages from !channel (skyhusker)
 	* #1679 - Security PIN plugin is QVGA sized (hrw)
 	* #1682 - Properly resize tab control in OTabWidget (drw)
-	* n.a.	- always show volume and wireless applet popups inside visible screen (deller)
+	* n.a.  - always show volume and wireless applet popups inside visible screen (deller)
 	* n.a.  - scale O-Menu-Applets appropriately (mickeyl)
-	* n.a.	- libopienet: fix bugs in wireless scanning and setting SSID (skyhusker)
-	* n.a.	- Wellenreiter: relax WE version matching test a bit (mickeyl)
-	* n.a.	- scale BluezApplet appropriately and use larger icons (mickeyl)
-	* n.a.	- memoryapplet: fix crash in memoryapplet on kernels without swap support (seneca cunningham)
+	* n.a.  - libopienet: fix bugs in wireless scanning and setting SSID (skyhusker)
+	* n.a.  - Wellenreiter: relax WE version matching test a bit (mickeyl)
+	* n.a.  - scale BluezApplet appropriately and use larger icons (mickeyl)
+	* n.a.  - memoryapplet: fix crash in memoryapplet on kernels without swap support (seneca cunningham)
 	* n.a.  - networksettings: ignore hostap control interfaces wifi* (mickeyl)
 	* n.a.  - Today Addressbook plugin fix configuration to show/not show birthdays, use checkboxes for selection (hrw)
 	* n.a.  - remove hardcoded font size from netsystemtime (hrw)
 	* n.a.  - remove hardcoded font size from checkbook graphs (hrw)
 	* n.a.  - Dagger - fixes for Sword 1.5.8, morph tag x-refs, closing last tab crash (drw)
 	
 
 	Internal
 	--------
 	* Make BluezApplet use OTaskbarApplet (mickeyl)
 	* libopiecore: rewrite OFileNotification to use the Linux 2.6 inotify interface (mickeyl)
 	* libopiecore: add ODirNotification - recursive directory notifications (mickeyl)
 	* libopienet: Skip hostap control interfaces 'wifi' and improve robustness in ONetworkInterface (mickeyl)
 	* libopieui: Remove OVersatileView and OVersatileViewItem (mickeyl)
 	* libopienet: Miscellaneous API cleanups (mickeyl)
 	* libopiecore: Add linux pcmcia system abstraction classes (mickeyl)
 	* libopiecore: ODevice now knows the default gfx driver to use (mteira,mickeyl)
+	* libopiecore: Add support for the Sharp SL-C3100 "Borzoi" (mickeyl)
 	* Remove assumptions about default gfx driver ("Transformed") all over the place (mteira,mickeyl)
-        * fix / optimize number of scanned directories. (ljp)
+	* Fix / Optimize number of scanned directories (ljp)
 	
 2005-03-25	Opie 1.2.0
 
 	Fixed Bugs
 	----------
 	* #1613 - AdvancedFM - scale toolbar icons appropriately (drw)
 	* #1620 - OFileSelector - show the button on press and not on press on hold (alwin)
 	* #1473 - Opie-Eye - Same as #1620 but we lack a common FileSystem Button class (zecke)
 	* n.a.  - PackageManager - fix bug where messages show up multiple times in install dialog (drw)
 	* n.a.	- make qpeglobal.h include qglobal.h (zecke)
 
 2005-03-20	Opie 1.2.0-rc1
diff --git a/libopie2/opiecore/device/odevice.h b/libopie2/opiecore/device/odevice.h
index 76cf97d..0eed1c9 100644
--- a/libopie2/opiecore/device/odevice.h
+++ b/libopie2/opiecore/device/odevice.h
@@ -75,24 +75,25 @@ enum OModel {
     Model_Jornada_720   = ( Model_Jornada | 0x0002 ),
 
     Model_Zaurus        = ( 2 << 16 ),
 
     Model_Zaurus_SL5000 = ( Model_Zaurus | 0x0001 ),
     Model_Zaurus_SL5500 = ( Model_Zaurus | 0x0002 ),
     Model_Zaurus_SLA300 = ( Model_Zaurus | 0x0003 ),
     Model_Zaurus_SLB600 = ( Model_Zaurus | 0x0004 ),
     Model_Zaurus_SLC7x0 = ( Model_Zaurus | 0x0005 ),
     Model_Zaurus_SL6000 = ( Model_Zaurus | 0x0006 ),
     Model_Zaurus_SLC3000 = ( Model_Zaurus | 0x0007 ),
     Model_Zaurus_SLC1000 = ( Model_Zaurus | 0x0008 ),
+    Model_Zaurus_SLC3100 = ( Model_Zaurus | 0x0009 ),
 
     Model_SIMpad        = ( 3 << 16 ),
 
     Model_SIMpad_All    = ( Model_SIMpad | 0xffff ),
     Model_SIMpad_CL4    = ( Model_SIMpad | 0x0001 ),
     Model_SIMpad_SL4    = ( Model_SIMpad | 0x0002 ),
     Model_SIMpad_SLC    = ( Model_SIMpad | 0x0003 ),
     Model_SIMpad_TSinus = ( Model_SIMpad | 0x0004 ),
 
     Model_Ramses        = ( 4 << 16 ),
 
     Model_Ramses_All    = ( Model_Ramses | 0xffff ),
diff --git a/libopie2/opiecore/device/odevice_zaurus.cpp b/libopie2/opiecore/device/odevice_zaurus.cpp
index b7f3104..4a80a7e 100644
--- a/libopie2/opiecore/device/odevice_zaurus.cpp
+++ b/libopie2/opiecore/device/odevice_zaurus.cpp
@@ -1,16 +1,16 @@
 /*
                              This file is part of the Opie Project
                              Copyright (C) 2002-2005 The Opie Team <opie-devel@handhelds.org>
-              =.
+              =.             Copyright (C) 2002-2005 Michael 'Mickey' Lauer <mickey@Vanille.de>
             .=l.
            .>+-=
  _;:,     .>    :=|.         This program is free software; you can
 .> <`_,   >  .   <=          redistribute it and/or  modify it under
 :`=1 )Y*s>-.--   :           the terms of the GNU Library General Public
 .="- .-=="i,     .._         License as published by the Free Software
  - .   .-<_>     .<>         Foundation; version 2 of the License.
      ._= =}       :
     .%`+i>       _;_.
     .i_,=:_.      -<s.       This program is distributed in the hope that
      +  .  -:.       =       it will be useful,  but WITHOUT ANY WARRANTY;
     : ..    .:,     . . .    without even the implied warranty of
@@ -215,24 +215,27 @@ void Zaurus::init(const QString& cpu_info)
     } else if ( model == "Sharp-Collie" || model == "Collie" ) {
         d->m_model = Model_Zaurus_SL5500;
         d->m_modelstr = "Zaurus SL-5500 or SL-5000d";
     } else if ( model == "SHARP Tosa" ) {
         d->m_model = Model_Zaurus_SL6000;
         d->m_modelstr = "Zaurus SL-6000";
     } else if ( model == "SHARP Spitz" ) {
         d->m_model = Model_Zaurus_SLC3000;
         d->m_modelstr = "Zaurus SL-C3000";
     } else if ( model == "SHARP Akita" ) {
         d->m_model = Model_Zaurus_SLC1000;
         d->m_modelstr = "Zaurus SL-C1000";
+    } else if ( model == "SHARP Borzoi" ) {
+        d->m_model = Model_Zaurus_SLC3100;
+        d->m_modelstr = "Zaurus SL-C3100";
     } else {
         d->m_model = Model_Zaurus_SL5500;
         d->m_modelstr = "Unknown Zaurus";
     }
 
     // set path to backlight device in kernel 2.6
     switch ( d->m_model )
     {
         case Model_Zaurus_SLB600: // fallthrough
         case Model_Zaurus_SL5500:
             m_backlightdev = "/sys/class/backlight/locomo-backlight/";
             break;
@@ -241,24 +244,25 @@ void Zaurus::init(const QString& cpu_info)
             break;
         default:
             m_backlightdev = "/sys/class/backlight/corgi-bl/";
     }
 
     // set initial rotation
     switch( d->m_model )
     {
         case Model_Zaurus_SL6000: // fallthrough
         case Model_Zaurus_SLA300:
             d->m_rotation = Rot0;
             break;
+        case Model_Zaurus_SLC3100: // fallthrough
         case Model_Zaurus_SLC3000: // fallthrough
         case Model_Zaurus_SLC1000: // fallthrough
         case Model_Zaurus_SLC7x0:
             d->m_rotation = rotation();
             d->m_direction = direction();
             break;
         case Model_Zaurus_SLB600: // fallthrough
         case Model_Zaurus_SL5000: // fallthrough
         case Model_Zaurus_SL5500: // fallthrough
         default:
             d->m_rotation = Rot270;
     }
@@ -287,24 +291,25 @@ void Zaurus::initButtons()
         return;
 
     d->m_buttons = new QValueList <ODeviceButton>;
 
     struct z_button * pz_buttons;
     int buttoncount;
     switch ( d->m_model )
     {
         case Model_Zaurus_SL6000:
             pz_buttons = z_buttons_6000;
             buttoncount = ARRAY_SIZE(z_buttons_6000);
             break;
+        case Model_Zaurus_SLC3100: // fallthrough
         case Model_Zaurus_SLC3000: // fallthrough
         case Model_Zaurus_SLC1000: // fallthrough
         case Model_Zaurus_SLC7x0:
             if ( isQWS( ) ) {
                 addPreHandler(this); // hinge-sensor-handler
             }
             pz_buttons = z_buttons_c700;
             buttoncount = ARRAY_SIZE(z_buttons_c700);
             break;
         default:
             pz_buttons = z_buttons;
             buttoncount = ARRAY_SIZE(z_buttons);
@@ -540,24 +545,25 @@ bool Zaurus::setDisplayStatus( bool on )
             ::close( fd );
         }
     }
     return res;
 }
 
 Transformation Zaurus::rotation() const
 {
     qDebug( "Zaurus::rotation()" );
     Transformation rot;
 
     switch ( d->m_model ) {
+        case Model_Zaurus_SLC3100: // fallthrough
         case Model_Zaurus_SLC3000: // fallthrough
         case Model_Zaurus_SLC1000:
         {
             OHingeStatus hs = readHingeSensor();
             qDebug( "Zaurus::rotation() - hinge sensor = %d", (int) hs );
             if ( hs == CASE_PORTRAIT ) rot = Rot0;
             else if ( hs == CASE_UNKNOWN ) rot = Rot270;
             else rot = Rot270;
         }
         break;
 
         // SLC7x0 needs a special case here, because we were able to set the W100
@@ -589,48 +595,52 @@ Transformation Zaurus::rotation() const
         default:
             rot = d->m_rotation;
             break;
     }
 
     return rot;
 }
 ODirection Zaurus::direction() const
 {
     ODirection dir;
 
     switch ( d->m_model ) {
+        case Model_Zaurus_SLC3100: // fallthrough
         case Model_Zaurus_SLC3000: // fallthrough
         case Model_Zaurus_SLC1000: // fallthrough
         case Model_Zaurus_SLC7x0: {
                 OHingeStatus hs = readHingeSensor();
                 if ( hs == CASE_PORTRAIT ) dir = CCW;
                 else if ( hs == CASE_UNKNOWN ) dir = CCW;
                 else dir = CW;
             }
             break;
         case Model_Zaurus_SL6000:
         case Model_Zaurus_SLA300:
         case Model_Zaurus_SLB600:
         case Model_Zaurus_SL5500:
         case Model_Zaurus_SL5000:
         default: dir = d->m_direction;
             break;
     }
     return dir;
 
 }
 
 bool Zaurus::hasHingeSensor() const
 {
-    return d->m_model == Model_Zaurus_SLC7x0 || d->m_model == Model_Zaurus_SLC3000 || d->m_model == Model_Zaurus_SLC1000;
+    return d->m_model == Model_Zaurus_SLC7x0 ||
+           d->m_model == Model_Zaurus_SLC3100 ||
+           d->m_model == Model_Zaurus_SLC3000 ||
+           d->m_model == Model_Zaurus_SLC1000;
 }
 
 OHingeStatus Zaurus::readHingeSensor() const
 {
     if (m_embedix)
     {
         int handle = ::open("/dev/apm_bios", O_RDWR|O_NONBLOCK);
         if (handle == -1)
         {
             qWarning("Zaurus::readHingeSensor() - failed (%s)", "unknown reason" ); //FIXME: use strerror
             return CASE_UNKNOWN;
         }
@@ -662,25 +672,25 @@ OHingeStatus Zaurus::readHingeSensor() const
     }
 }
 
 /*
  * Take code from iPAQ device.
  * That way we switch the cursor directions depending on status of hinge sensor, eg. hardware direction.
  * I hope that is ok - Alwin
  */
 bool Zaurus::filter ( int /*unicode*/, int keycode, int modifiers, bool isPress, bool autoRepeat )
 {
     int newkeycode = keycode;
 
-    if (d->m_model != Model_Zaurus_SLC7x0 && d->m_model != Model_Zaurus_SLC3000 && d->m_model != Model_Zaurus_SLC1000) return false;
+    if ( !hasHingeSensor() ) return false;
 
     /* map cursor keys depending on the hinge status */
     switch ( keycode ) {
         // Rotate cursor keys
         case Key_Left :
         case Key_Right:
         case Key_Up   :
         case Key_Down :
         {
             if (rotation()==Rot90) {
                 newkeycode = Key_Left + ( keycode - Key_Left + 3 ) % 4;
             }
diff --git a/libopie2/opiecore/device/odevice_zaurus.h b/libopie2/opiecore/device/odevice_zaurus.h
index 4314aff..677e29f 100644
--- a/libopie2/opiecore/device/odevice_zaurus.h
+++ b/libopie2/opiecore/device/odevice_zaurus.h
@@ -1,16 +1,16 @@
 /*
                              This file is part of the Opie Project
                              Copyright (C) 2002-2005 The Opie Team <opie-devel@handhelds.org>
-              =.
+              =.             Copyright (C) 2002-2005 Michael 'Mickey' Lauer <mickey@Vanille.de>
             .=l.
            .>+-=
  _;:,     .>    :=|.         This program is free software; you can
 .> <`_,   >  .   <=          redistribute it and/or  modify it under
 :`=1 )Y*s>-.--   :           the terms of the GNU Library General Public
 .="- .-=="i,     .._         License as published by the Free Software
  - .   .-<_>     .<>         Foundation; version 2 of the License.
      ._= =}       :
     .%`+i>       _;_.
     .i_,=:_.      -<s.       This program is distributed in the hope that
      +  .  -:.       =       it will be useful,  but WITHOUT ANY WARRANTY;
     : ..    .:,     . . .    without even the implied warranty of