Console configuration widget done, Environment variables can now be set

7 files changed, 162 insertions, 17 deletions

diff --git a/noncore/apps/opie-console/MyPty.cpp b/noncore/apps/opie-console/MyPty.cpp
index 534f79a..b0f0275 100644
--- a/noncore/apps/opie-console/MyPty.cpp
+++ b/noncore/apps/opie-console/MyPty.cpp
@@ -17,332 +17,339 @@
 
 /* If you're compiling konsole on non-Linux platforms and find
    problems that you can track down to this file, please have
    a look into ../README.ports, too.
 */
 
 /*! \file
 */
 
 /*! \class TEPty
 
     \brief Ptys provide a pseudo terminal connection to a program.
 
     Although closely related to pipes, these pseudo terminal connections have
     some ability, that makes it nessesary to uses them. Most importent, they
     know about changing screen sizes and UNIX job control.
 
     Within the terminal emulation framework, this class represents the
     host side of the terminal together with the connecting serial line.
 
     One can create many instances of this class within a program.
     As a side effect of using this class, a signal(2) handler is
     installed on SIGCHLD.
 
     \par FIXME
 
     [NOTE: much of the technical stuff below will be replaced by forkpty.]
 
     publish the SIGCHLD signal if not related to an instance.
 
     clearify TEPty::done vs. TEPty::~TEPty semantics.
     check if pty is restartable via run after done.
 
     \par Pseudo terminals
 
     Pseudo terminals are a unique feature of UNIX, and always come in form of
     pairs of devices (/dev/ptyXX and /dev/ttyXX), which are connected to each
     other by the operating system. One may think of them as two serial devices
     linked by a null-modem cable. Being based on devices the number of
     simultanous instances of this class is (globally) limited by the number of
     those device pairs, which is 256.
 
     Another technic are UNIX 98 PTY's. These are supported also, and prefered
     over the (obsolete) predecessor.
 
     There's a sinister ioctl(2), signal(2) and job control stuff
     nessesary to make everything work as it should.
 */
 
 
 #include <qapplication.h>
 #include <qsocketnotifier.h>
 #include <qstring.h>
 #include <qfile.h>
 
 #include <stdlib.h>
 #include <stdio.h>
 #include <signal.h>
 #include <fcntl.h>
 #include <unistd.h>
 #include <termios.h>
 #include <sys/types.h>
 #include <sys/ioctl.h>
 #include <sys/wait.h>
 
 #ifdef HAVE_OPENPTY
 #include <pty.h>
 #endif
 
 #include "procctl.h"
 #include "MyPty.h"
 
 
 #undef VERBOSE_DEBUG
 
 
 /* -------------------------------------------------------------------------- */
 
 /*!
    Informs the client program about the
    actual size of the window.
 */
 
 void MyPty::setSize(int lines, int columns)
 {
     qWarning("setting size");
   struct winsize wsize;
   wsize.ws_row = (unsigned short)lines;
   wsize.ws_col = (unsigned short)columns;
   if(m_fd < 0) return;
   ioctl(m_fd,TIOCSWINSZ,(char *)&wsize);
 }
 
 
 void MyPty::donePty()
 {
     // This is code from the Qt DumbTerminal example
 
     ::close(m_fd);
 
     if (m_cpid) {
 	kill(m_cpid, SIGHUP);
 	//waitpid(m_cpid, &status, 0);
         delete m_sn_e;
         delete m_sn_r;
         m_sn_e = 0l;
         m_sn_r = 0l;
     }
 
     m_cpid = 0;
     m_fd = -1;
 //    emit done(status);
 }
 
 
 const char* MyPty::deviceName()
 {
     return m_ttynam;
 }
 
 
 void MyPty::error()
 {
     // This is code from the Qt DumbTerminal example
     donePty();
 }
 
 void MyPty::start() {
-    char* cmd = "/bin/sh";
-
-    if ( QFile::exists( "/bin/bash" ) ) {
-        cmd = "/bin/bash";
-    }
-
     QStrList lis;
-    int r =run(cmd, lis, 0, 0);
+    int r =run(m_cmd.latin1(), lis, 0, 0);
     r = r;
 }
 /*!
     start the client program.
 */
 int MyPty::run(const char* cmd, QStrList &, const char*, int)
 {
     // This is code from the Qt DumbTerminal example
     m_cpid = fork();
 
     if ( !m_cpid ) {
 	// child - exec shell on tty
 	for (int sig = 1; sig < NSIG; sig++) signal(sig,SIG_DFL);
 	int ttyfd = ::open(m_ttynam, O_RDWR);
 	dup2(ttyfd, STDIN_FILENO);
 	dup2(ttyfd, STDOUT_FILENO);
 	dup2(ttyfd, STDERR_FILENO);
 	// should be done with tty, so close it
 	::close(ttyfd);
 	static struct termios ttmode;
 	if ( setsid() < 0 )
 	    perror( "failed to set process group" );
 #if defined (TIOCSCTTY)
 	// grabbed from APUE by Stevens
 	ioctl(STDIN_FILENO, TIOCSCTTY, 0);
 #endif
 	tcgetattr( STDIN_FILENO, &ttmode );
 	ttmode.c_cc[VINTR] = 3;
 	ttmode.c_cc[VERASE] = 8;
 	tcsetattr( STDIN_FILENO, TCSANOW, &ttmode );
 	setenv("TERM",m_term,1);
 	setenv("COLORTERM","0",1);
-
+    EnvironmentMap::Iterator it;
+    for (it = m_env.begin(); it != m_env.end(); it++) {
+        setenv(it.key().latin1(), it.data().latin1(), 1);
+    }
 	if (getuid() == 0) {
 	    char msg[] = "WARNING: You are running this shell as root!\n";
 	    write(ttyfd, msg, sizeof(msg));
 	}
 	execl(cmd, cmd, 0);
 
 	donePty();
 	exit(-1);
     }
 
     // parent - continue as a widget
     delete m_sn_r;
     m_sn_r = new QSocketNotifier(m_fd,QSocketNotifier::Read,this);
     delete m_sn_e;
     m_sn_e = new QSocketNotifier(m_fd,QSocketNotifier::Exception,this);
     connect(m_sn_r,SIGNAL(activated(int)),this,SLOT(readPty()));
     connect(m_sn_e,SIGNAL(activated(int)),this,SLOT(error()));
 
     return 0;
 }
 
 int MyPty::openPty()
 {
     // This is code from the Qt DumbTerminal example
     int ptyfd = -1;
 
 #ifdef HAVE_OPENPTY
     int ttyfd;
     if ( openpty(&ptyfd,&ttyfd,ttynam,0,0) )
 	ptyfd = -1;
     else
 	close(ttyfd); // we open the ttynam ourselves.
 #else
     for (const char* c0 = "pqrstuvwxyzabcde"; ptyfd < 0 && *c0 != 0; c0++) {
 	for (const char* c1 = "0123456789abcdef"; ptyfd < 0 && *c1 != 0; c1++) {
 	    sprintf(m_ptynam,"/dev/pty%c%c",*c0,*c1);
 	    sprintf(m_ttynam,"/dev/tty%c%c",*c0,*c1);
 	    if ((ptyfd = ::open(m_ptynam,O_RDWR)) >= 0) {
 		if (geteuid() != 0 && !access(m_ttynam,R_OK|W_OK) == 0) {
 		    ::close(ptyfd);
 		    ptyfd = -1;
 		}
 	    }
 	}
     }
 #endif
 
     if ( ptyfd < 0 ) {
 //	qApp->exit(1);
 	return -1;
     }
 
     return ptyfd;
 }
 
 /*!
     Create an instance.
 */
 MyPty::MyPty(const Profile& prof) : m_cpid(0)
 {
 
     int term = prof.readNumEntry("Terminal", Profile::VT100 );
     switch( term ) {
     default:
     case Profile::VT100:
     case Profile::VT102:
         m_term = "vt100";
         break;
     case Profile::Linux:
         m_term = "linux";
         break;
     case Profile::XTerm:
         m_term = "xterm";
         break;
     }
     m_sn_e = 0l;
     m_sn_r = 0l;
   m_fd = openPty();
   ProcCtl* ctl = ProcCtl::self();
   Q_UNUSED(ctl);
+  reload(prof);
 }
 
 /*!
     Destructor.
     Note that the related client program is not killed
     (yet) when a instance is deleted.
 */
 MyPty::~MyPty()
 {
     donePty();
 }
 QString MyPty::identifier()const {
     return QString::fromLatin1("term");
 }
 QString MyPty::name()const{
     return identifier();
 }
 bool MyPty::open() {
     if (m_fd < 0)
         m_fd = openPty();
 
     start();
     return true;
 }
 void MyPty::close() {
     donePty();
     m_fd = openPty();
 }
-void MyPty::reload( const Profile& ) {
-
+void MyPty::reload( const Profile& prof) {
+    m_env.clear();
+    m_cmd = prof.readEntry("Command", "/bin/bash");
+    int envcount = prof.readNumEntry("EnvVars", 0);
+    for (int i=0; i<envcount; i++) {
+        QString name = prof.readEntry("Env_Name_" + QString::number(i), "");
+        QString value = prof.readEntry("Env_Value_" + QString::number(i), "");
+        if (!(name.isEmpty() || value.isEmpty())) {
+            m_env.insert(name, value);
+        }
+    }
 }
 /*! sends len bytes through the line */
 void MyPty::send(const QByteArray& ar)
 {
 #ifdef VERBOSE_DEBUG
   // verbose debug
   printf("sending bytes:\n");
   for (uint i = 0; i < ar.count(); i++)
     printf("%c", ar[i]);
   printf("\n");
 #endif
 
   ::write(m_fd, ar.data(), ar.count());
 }
 
 /*! indicates that a block of data is received */
 void MyPty::readPty()
 {
   QByteArray buf(4096);
 
   int len = ::read( m_fd, buf.data(), 4096 );
 
   if (len == -1 || len == 0) {
      donePty();
      return;
   }
 
   if (len < 0)
      return;
 
 
   buf.resize(len);
   emit received(buf);
 
 #ifdef VERBOSE_DEBUG
   // verbose debug
   printf("read bytes:\n");
   for (uint i = 0; i < buf.count(); i++)
     printf("%c", buf[i]);
   printf("\n");
 #endif
 
 }
 QBitArray MyPty::supports()const {
     QBitArray ar(3);
     //autoconnect
     ar[0] = 1;
     //
     ar[1] = 0;
     ar[2] = 0;
 
     return ar;
 }
diff --git a/noncore/apps/opie-console/MyPty.h b/noncore/apps/opie-console/MyPty.h
index 7561ca3..b292ce4 100644
--- a/noncore/apps/opie-console/MyPty.h
+++ b/noncore/apps/opie-console/MyPty.h
@@ -1,100 +1,106 @@
 /* -------------------------------------------------------------------------- */
 /*                                                                            */
 /* [MyPty.h]                 Pseudo Terminal Device                           */
 /*                                                                            */
 /* -------------------------------------------------------------------------- */
 /*                                                                            */
 /* Copyright (c) 1997,1998 by Lars Doelle <lars.doelle@on-line.de>            */
 /*                                                                            */
 /* This file is part of Konsole - an X terminal for KDE                       */
 /*                                                                            */
 /* -------------------------------------------------------------------------- */
 /*									      */
 /* Ported Konsole to Qt/Embedded                                              */
 /*									      */
 /* Copyright (C) 2000 by John Ryland <jryland@trolltech.com>                  */
 /*									      */
 /* -------------------------------------------------------------------------- */
 
 /*! \file
 */
 
 #ifndef MY_PTY_H
 #define MY_PTY_H
 
 #include <qobject.h>
+#include <qlist.h>
 #include <qstrlist.h>
 
 #include "io_layer.h"
 
+typedef QMap<QString, QString> EnvironmentMap;
+
 class Profile;
 class QSocketNotifier;
 class MyPty : public IOLayer
 {
     Q_OBJECT
 public:
 
     MyPty(const Profile&);
     ~MyPty();
 
 
 
     QString identifier()const;
     QString name()const;
     QBitArray supports()const;
 
   public slots:
  /*!
       having a `run' separate from the constructor allows to make
       the necessary connections to the signals and slots of the
       instance before starting the execution of the client.
     */
     void start();
     int run(const char* pgm, QStrList & args , const char* term, int addutmp);
     bool open();
     void close();
     void reload( const Profile& );
     void setSize(int lines, int columns);
     void error();
     bool isConnected() { return true; };
   signals:
 
     /*!
         emitted when the client program terminates.
         \param status the wait(2) status code of the terminated client program.
     */
     void done(int status);
 
     /*!
         emitted when a new block of data comes in.
         \param s - the data
         \param len - the length of the block
     */
     void received(const QByteArray&);
 
   public slots:
 
     void send(const QByteArray& );
 
 private:
     const char* deviceName();
 
 protected slots:
       void readPty();
       void donePty();
 
 private:
     int  openPty();
 
 private:
 
     char m_ptynam[16]; // "/dev/ptyxx" | "/dev/ptmx"
     char m_ttynam[16]; // "/dev/ttyxx" | "/dev/pts/########..."
     int m_fd;
     int m_cpid;
     QSocketNotifier* m_sn_e;
     QSocketNotifier* m_sn_r;
     char* m_term;
+
+    QString m_cmd;
+    EnvironmentMap m_env;
 };
 
 #endif
diff --git a/noncore/apps/opie-console/PLANS b/noncore/apps/opie-console/PLANS
index 8e0bee4..a7c7578 100644
--- a/noncore/apps/opie-console/PLANS
+++ b/noncore/apps/opie-console/PLANS
@@ -1,55 +1,55 @@
 
 From a UNIX point of view we want to do something like minicom
 with a better GUI.
 It should feature some terminal emulation vt100/102, ansi,
 filetransfer via {x,y,z}modem, and some sort of session management.
 Besides this requirement we would like to be able to execute 'scripts'
 in a session.
 A script would just write to the TEmulation and then be sent via
 an IOlayer.
 
 We want a modular architecture which might support plugins in
 the future
 
 should we have a general opie-console setting dialog where you configure
 general things like where the tabs are, the profiles, and the default
 keyboard?
 
 
 (Almost) DONE:
   Framework
   Serial IOLayer
   Saving and Restoring Profiles
   ConfigDialog Framework
   IOLayer
   Profile->Session and MainWidget
   FilesendingLayer ( Z/Y Modem tested X does not work at all )
   Fullscreen
   Modem - Josef
   Keys - hash 
+  Scripting - wazlaf 
 
 TASKS in progress:
   Keys - hash
-  Scripting - wazlaf 
    
   Session->Profile - hash => why is this needed? you can not change any settings
                              after you start the session, so all you would do is
                              create a duplicate of the profile used to open the
                              current session. maybe needed later when you can change
                              settings while the session is running (colors, fonts...)
 	             zecke => think of that. You try to hook up with a New Device 
 		    	     neither know anything.... speed flow and such stuff
 			     you start to experiment and it starts to work
 			     now you want to save the session
                  
                  hash => got it.
 
 OPEN tasks:
   Receiving ( copy &n paste from filetransfer.cpp )
 
 POSTPONED UNTIL LATER:    
   Irda  ConfigWidget 
   BT ConfigWidget 
   IRDA-Layer 
   Bluetooth-Layer 
 
diff --git a/noncore/apps/opie-console/consoleconfigwidget.cpp b/noncore/apps/opie-console/consoleconfigwidget.cpp
new file mode 100644
index 0000000..70e2e78
--- a/dev/null
+++ b/noncore/apps/opie-console/consoleconfigwidget.cpp
@@ -0,0 +1,95 @@
+#include <qlabel.h>
+#include <qlayout.h>
+#include <qcombobox.h>
+#include <qlineedit.h>
+#include <qpushbutton.h>
+#include <qlistview.h>
+#include <qhbox.h>
+#include <qregexp.h>
+#include <stdio.h>
+
+#include "consoleconfigwidget.h"
+
+ConsoleConfigWidget::ConsoleConfigWidget( const QString& name, QWidget* parent,
+                                const char* na )
+    : ProfileDialogConnectionWidget( name, parent, na ) {
+    m_lay = new QVBoxLayout( this );
+    QLabel *label = new QLabel(tr("Command to execute"), this);
+    m_lay->addWidget(label);
+    m_cmd = new QLineEdit(this);
+    m_lay->addWidget(m_cmd);
+    label = new QLabel(tr("Environment Variables"), this);
+    m_lay->addWidget(label);
+    m_env = new QListView(this);
+    m_env->addColumn(tr("Name"));
+    m_env->addColumn(tr("Value"));
+    m_lay->addWidget(m_env);
+    
+    QHBox *hbox = new QHBox(this);
+    label = new QLabel(tr("Name :"), hbox);
+    m_name = new QLineEdit(hbox);
+    m_lay->addWidget(hbox);
+
+    hbox = new QHBox(this);
+    label = new QLabel(tr("Value :"), hbox);
+    m_value = new QLineEdit(hbox);
+    m_lay->addWidget(hbox);
+    
+    hbox = new QHBox(this);
+    hbox->setSpacing(10);
+    m_remove = new QPushButton(tr("Remove"), hbox);
+    connect(m_remove, SIGNAL(clicked()), this, SLOT(slotRemove()));
+    m_add = new QPushButton(tr("Add"), hbox);
+    connect(m_add, SIGNAL(clicked()), this, SLOT(slotAdd()));
+    m_lay->addWidget(hbox);
+}
+
+void ConsoleConfigWidget::slotAdd() {
+    if (!(m_name->text().isEmpty() || m_value->text().isEmpty())) {
+        QListViewItem *item = new QListViewItem(m_env);
+        item->setText(0, m_name->text());
+        item->setText(1, m_value->text());
+        m_env->insertItem(item);
+    }
+}
+
+void ConsoleConfigWidget::slotRemove() {
+    QListViewItem *item = m_env->currentItem();
+    if (item) {
+        m_env->takeItem(item);
+    }
+}
+
+ConsoleConfigWidget::~ConsoleConfigWidget() {
+}
+
+void ConsoleConfigWidget::load( const Profile& prof ) {
+    m_cmd->setText(prof.readEntry("Command", "/bin/bash"));
+    int envcount = prof.readNumEntry("EnvVars", 0); 
+    for (int i=0; i<envcount; i++) {
+        QString name = prof.readEntry("Env_Name_" + QString::number(i), "");
+        QString value = prof.readEntry("Env_Value_" + QString::number(i), "");
+        if (!(name.isEmpty() || value.isEmpty())) {
+            QListViewItem *item = new QListViewItem(m_env);
+            item->setText(0, name);
+            item->setText(1, value);
+            m_env->insertItem(item);
+        }
+    }
+}
+
+void ConsoleConfigWidget::save( Profile& prof ) {
+    prof.writeEntry( "Command", m_cmd->text());
+    QListViewItem *item = m_env->firstChild();
+    int counter = 0;
+    while (item) {
+        QString name = item->text(0);
+        QString value = item->text(1);
+        prof.writeEntry("Env_Name_" + QString::number(counter), name);
+        prof.writeEntry("Env_Value_" + QString::number(counter), value);
+        item = item->nextSibling();
+        counter++;
+    }
+    prof.writeEntry("EnvVars", QString::number(counter));
+}
+
diff --git a/noncore/apps/opie-console/consoleconfigwidget.h b/noncore/apps/opie-console/consoleconfigwidget.h
new file mode 100644
index 0000000..c980cb4
--- a/dev/null
+++ b/noncore/apps/opie-console/consoleconfigwidget.h
@@ -0,0 +1,34 @@
+#ifndef OPIE_CONSOLE_CONFIG_WIDGET_H
+#define OPIE_CONSOLE_CONFIG_WIDGET_H
+
+#include "profiledialogwidget.h"
+
+class QVBoxLayout;
+class QLineEdit;
+class QListView;
+class QPushButton;
+
+class ConsoleConfigWidget : public ProfileDialogConnectionWidget {
+    Q_OBJECT
+public:
+    ConsoleConfigWidget( const QString& name, QWidget* parent, const char* name = 0l );
+    ~ConsoleConfigWidget();
+
+    void load( const Profile& );
+    void save( Profile& );
+
+protected slots:
+    void slotAdd();
+    void slotRemove();
+private:
+    QVBoxLayout *m_lay;
+    QLineEdit *m_cmd;
+    QLineEdit *m_name;
+    QLineEdit *m_value;
+    QListView *m_env;
+    QPushButton *m_add;
+    QPushButton *m_remove;
+};
+
+
+#endif
diff --git a/noncore/apps/opie-console/default.cpp b/noncore/apps/opie-console/default.cpp
index 5d82c6a..b060139 100644
--- a/noncore/apps/opie-console/default.cpp
+++ b/noncore/apps/opie-console/default.cpp
@@ -1,121 +1,122 @@
 #include "io_serial.h"
 #include "io_irda.h"
 #include "io_bt.h"
 #include "io_modem.h"
 #include "filetransfer.h"
 #include "filereceive.h"
 #include "serialconfigwidget.h"
 #include "irdaconfigwidget.h"
 #include "btconfigwidget.h"
 #include "modemconfigwidget.h"
 #include "terminalwidget.h"
 #include "function_keyboard.h"
+#include "consoleconfigwidget.h"
 #include "MyPty.h"
 
 #include "default.h"
 
 extern "C" {
     // FILE Transfer Stuff
     FileTransferLayer* newSZTransfer(IOLayer* lay) {
         return new FileTransfer( FileTransfer::SZ, lay );
     }
     FileTransferLayer* newSYTransfer(IOLayer* lay) {
         return new FileTransfer( FileTransfer::SY, lay );
     }
     FileTransferLayer* newSXTransfer(IOLayer* lay) {
         return new FileTransfer(FileTransfer ::SX, lay );
     }
 
     // FILE Transfer Receive Stuff
     ReceiveLayer* newSZReceive(IOLayer* lay) {
         return new FileReceive( FileReceive::SZ, lay );
     }
     ReceiveLayer* newSYReceive(IOLayer* lay) {
         return new FileReceive( FileReceive::SY, lay );
     }
     ReceiveLayer* newSXReceive(IOLayer* lay) {
         return new FileReceive(FileReceive::SX, lay );
     }
 
     // Layer stuff
     IOLayer* newSerialLayer( const Profile& prof) {
         return new IOSerial( prof );
     }
     IOLayer* newBTLayer( const Profile& prof ) {
         return new IOBt( prof );
     }
     IOLayer* newIrDaLayer( const Profile& prof ) {
         return new IOIrda( prof );
     }
     IOLayer* newModemLayer( const Profile& prof ) {
         return new IOModem( prof );
     }
     IOLayer* newConsole( const Profile& prof ) {
         return new MyPty( prof );
     }
 
     // Connection Widgets
     ProfileDialogWidget* newSerialWidget( const QString& str, QWidget* wid ) {
         return new SerialConfigWidget( str, wid );
     }
     ProfileDialogWidget* newIrDaWidget( const QString& str, QWidget* wid ) {
         return new IrdaConfigWidget( str, wid );
     }
     ProfileDialogWidget* newModemWidget( const QString& str, QWidget* wid ) {
         return new ModemConfigWidget(str, wid );
     }
     ProfileDialogWidget* newBTWidget( const QString& str, QWidget* wid ) {
         return new BTConfigWidget(str, wid );
     }
-    ProfileDialogWidget* newConsoleWid( const QString& , QWidget*  ) {
-        return 0l;
+    ProfileDialogWidget* newConsoleWid( const QString& str, QWidget* wid ) {
+        return new ConsoleConfigWidget(str, wid );
     }
 
 
     // Terminal Widget(s)
     ProfileDialogWidget* newTerminalWidget(const QString& na, QWidget* wid) {
         return new TerminalWidget(na, wid,0 );
     }
 
     // Function Keyboard Widget
     ProfileDialogWidget* newKeyboardWidget(const QString& na, QWidget *wid) {
         return new FunctionKeyboardConfig(na, wid);
     }
 
 /*    // VT Emulations
     EmulationLayer* newVT102( WidgetLayer* wid ) {
         return new Vt102Emulation( wid );
     }
 */
 };
 
 Default::Default( MetaFactory* fact ) {
     fact->addFileTransferLayer( "SZ", QObject::tr("Z-Modem"), newSZTransfer );
     fact->addFileTransferLayer( "SY", QObject::tr("Y-Modem"), newSYTransfer );
     fact->addFileTransferLayer( "SX", QObject::tr("X-Modem"), newSXTransfer );
 
     fact->addReceiveLayer( "SZ", QObject::tr("Z-Modem"), newSZReceive );
     fact->addReceiveLayer( "SY", QObject::tr("Y-Modem"), newSYReceive );
     fact->addReceiveLayer( "SX", QObject::tr("X-Modem"), newSXReceive );
 
     fact->addIOLayerFactory( "serial", QObject::tr("Serial"), newSerialLayer );
 //    fact->addIOLayerFactory( "irda", QObject::tr("Infrared"), newIrDaLayer   );
 //    fact->addIOLayerFactory( "bt", QObject::tr("Bluetooth"),  newBTLayer     );
     fact->addIOLayerFactory( "modem", QObject::tr("Modem"),   newModemLayer  );
-    fact->addIOLayerFactory( "console", QObject::tr("local Console"), newConsole   );
+    fact->addIOLayerFactory( "console", QObject::tr("Local Console"), newConsole   );
 
     fact->addConnectionWidgetFactory( "serial", QObject::tr("Serial"), newSerialWidget );
 //    fact->addConnectionWidgetFactory( "irda", QObject::tr("Infrared"), newIrDaWidget );
     fact->addConnectionWidgetFactory( "modem", QObject::tr("Modem"), newModemWidget );
 //    fact->addConnectionWidgetFactory( "bt", QObject::tr("Bluetooth"), newBTWidget );
-    fact->addConnectionWidgetFactory( "console", QObject::tr("local Console"), newConsoleWid );
+    fact->addConnectionWidgetFactory( "console", QObject::tr("Local Console"), newConsoleWid );
 
     fact->addTerminalWidgetFactory( "default", QObject::tr("Default Terminal"),  newTerminalWidget );
     fact->addKeyboardWidgetFactory( "defaultKeys", QObject::tr("Default Keyboard"),
  newKeyboardWidget );
 
 //    fact->addEmulationLayer( "default", QObject::tr("Default Terminal"), newVT102 );
 }
 Default::~Default() {
 
 }
diff --git a/noncore/apps/opie-console/opie-console.pro b/noncore/apps/opie-console/opie-console.pro
index f5737d4..e3f92f0 100644
--- a/noncore/apps/opie-console/opie-console.pro
+++ b/noncore/apps/opie-console/opie-console.pro
@@ -1,70 +1,72 @@
 TEMPLATE     = app
 #CONFIG       = qt warn_on release
 CONFIG 	     = qt debug
 DESTDIR      = $(OPIEDIR)/bin
 HEADERS      = io_layer.h io_serial.h io_irda.h io_bt.h io_modem.h \
 	       file_layer.h filetransfer.h \
 	       metafactory.h \
 	       session.h \
 	       mainwindow.h \
 	       profile.h \
 	       profileconfig.h \
 	       profilemanager.h  \
 	       configwidget.h \
 	       tabwidget.h \
 	       configdialog.h \
 	       keytrans.h \
 	       transferdialog.h \
 	       profiledialogwidget.h \
 	       profileeditordialog.h \
 	       default.h \
 	       iolayerbase.h \
 	       serialconfigwidget.h irdaconfigwidget.h \
 	       btconfigwidget.h modemconfigwidget.h \
 	       atconfigdialog.h dialdialog.h \  
                procctl.h \
                function_keyboard.h  \
 	       receive_layer.h filereceive.h \
 	       script.h \
 	       dialer.h \
 	       terminalwidget.h \
 	       emulation_handler.h TECommon.h \
 	       TEHistroy.h TEScreen.h TEWidget.h \
-	       TEmuVt102.h TEmulation.h MyPty.h
+	       TEmuVt102.h TEmulation.h MyPty.h \
+           consoleconfigwidget.h
 
 SOURCES      = io_layer.cpp io_serial.cpp io_irda.cpp io_bt.cpp io_modem.cpp \
 	       file_layer.cpp filetransfer.cpp \
                main.cpp \
 	       metafactory.cpp \
 	       session.cpp \
 	       mainwindow.cpp \
 	       profile.cpp \
 	       profileconfig.cpp \
 	       profilemanager.cpp  \
 	       tabwidget.cpp \
 	       configdialog.cpp \
 	       keytrans.cpp \
 	       transferdialog.cpp \
 	       profiledialogwidget.cpp \
 	       profileeditordialog.cpp \
 	       iolayerbase.cpp \
 	       serialconfigwidget.cpp irdaconfigwidget.cpp \
 	       btconfigwidget.cpp modemconfigwidget.cpp \ 
 	       atconfigdialog.cpp dialdialog.cpp \
 	       default.cpp  procctl.cpp \
                function_keyboard.cpp  \
 	       receive_layer.cpp filereceive.cpp \
 	       script.cpp \
 		   dialer.cpp \
 	       terminalwidget.cpp \
 		emulation_handler.cpp TEHistory.cpp \
 		TEScreen.cpp TEWidget.cpp \
-		TEmuVt102.cpp TEmulation.cpp MyPty.cpp
+		TEmuVt102.cpp TEmulation.cpp MyPty.cpp \
+        consoleconfigwidget.cpp
 		
 
 INTERFACES   = configurebase.ui editbase.ui
 INCLUDEPATH += $(OPIEDIR)/include
 DEPENDPATH  += $(OPIEDIR)/include
 LIBS        += -lqpe -lopie 
 TARGET       = opie-console