- 3 small fixes, please review:

- disable all relevant menu items when last session has been closed
  (but this might not be the correct bugfix, so consider it temporary)
- don't set menu status to connected when connection fails
- modem sessions: when user cancels connection, close serial connection first
  again, so we can reconnect (re-dial) later without problems

3 files changed, 13 insertions, 4 deletions

diff --git a/noncore/apps/opie-console/io_modem.cpp b/noncore/apps/opie-console/io_modem.cpp
index 22a3673..41f553b 100644
--- a/noncore/apps/opie-console/io_modem.cpp
+++ b/noncore/apps/opie-console/io_modem.cpp
@@ -1,78 +1,82 @@
 
 #include "io_modem.h"
 
 #include "dialer.h"
 
 IOModem::IOModem( const Profile &profile )
 	: IOSerial( profile ) {
 	m_profile = profile;
 }
 
 
 IOModem::~IOModem() {
 
 }
 
 
 void IOModem::close() {
 	// maybe do a hangup here just in case...?
 
     IOSerial::close();
 }
 
 bool IOModem::open() {
     bool ret = IOSerial::open();
 	if(!ret) return false;
 
 	Dialer d(m_profile);
 
 	int result = d.exec();
 	if(result == QDialog::Accepted)
 	{
 		return true;
 	}
-	else return false;
+	else
+	{
+		close();
+		return false;
+	}
 }
 
 void IOModem::reload( const Profile &config ) {
 
     m_device = config.readEntry("Device", MODEM_DEFAULT_DEVICE);
     m_baud = config.readNumEntry("Baud", MODEM_DEFAULT_BAUD);
     m_parity = config.readNumEntry("Parity", MODEM_DEFAULT_PARITY);
     m_dbits = config.readNumEntry("DataBits", MODEM_DEFAULT_DBITS);
     m_sbits = config.readNumEntry("StopBits", MODEM_DEFAULT_SBITS);
     m_flow = config.readNumEntry("Flow", MODEM_DEFAULT_FLOW);
 
     m_initString = config.readEntry("InitString", MODEM_DEFAULT_INIT_STRING );
     m_resetString = config.readEntry("ResetString", MODEM_DEFAULT_RESET_STRING );
     m_dialPref1 = config.readEntry("DialPrefix1", MODEM_DEFAULT_DIAL_PREFIX1 );
     m_dialSuf1 = config.readEntry("DialSuffix1", MODEM_DEFAULT_DIAL_SUFFIX1 );
     m_dialPref2 = config.readEntry("DialPrefix2", MODEM_DEFAULT_DIAL_PREFIX1 );
     m_dialSuf2 = config.readEntry("DialSuffix2", MODEM_DEFAULT_DIAL_SUFFIX1 );
     m_dialPref3 = config.readEntry("DialPrefix3", MODEM_DEFAULT_DIAL_PREFIX1 );
     m_dialSuf3 = config.readEntry("DialSuffix3", MODEM_DEFAULT_DIAL_SUFFIX1 );
     m_connect = config.readEntry("DefaultConnect" MODEM_DEFAULT_CONNECT_STRING );
     m_hangup = config.readEntry("HangupString", MODEM_DEFAULT_HANGUP_STRING );
     m_cancel = config.readEntry("CancelString", MODEM_DEFAULT_CANCEL_STRING );
     m_dialTime = config.readNumEntry("DialTime", MODEM_DEFAULT_DIAL_TIME );
     m_delayRedial = config.readNumEntry("DelayRedial", MODEM_DEFAULT_DELAY_REDIAL );
     m_numberTries = config.readNumEntry("NumberTries", MODEM_DEFAULT_NUMBER_TRIES );
     m_dtrDropTime = config.readNumEntry("DTRDRopTime", MODEM_DEFAULT_DTR_DROP_TIME );
     m_bpsDetect = config.readBoolEntry("BPSDetect", MODEM_DEFAULT_BPS_DETECT );
     m_dcdLines = config.readBoolEntry("DCDLines", MODEM_DEFAULT_DCD_LINES );
     m_multiLineUntag = config.readBoolEntry("MultiLineUntag", MODEM_DEFAULT_MULTI_LINE_UNTAG );
 }
 
 
 QString IOModem::identifier() const {
     return "modem";
 }
 
 QString IOModem::name() const {
     return "Modem IO Layer";
 }
 
 void IOModem::slotExited(OProcess* proc ){
     close();
 }
 
diff --git a/noncore/apps/opie-console/io_serial.cpp b/noncore/apps/opie-console/io_serial.cpp
index b89a53b..cc63c58 100644
--- a/noncore/apps/opie-console/io_serial.cpp
+++ b/noncore/apps/opie-console/io_serial.cpp
@@ -1,176 +1,177 @@
 #include <fcntl.h>
 #include <termios.h>
 #include <errno.h>
 #include <unistd.h>
 #include "io_serial.h"
 
 IOSerial::IOSerial(const Profile &config) : IOLayer(config) {
     m_read = 0l;
     m_error = 0l;
     m_fd = 0;
     m_connected = false;
     reload(config);
 }
 
 
 IOSerial::~IOSerial() {
     if (m_fd) {
         close();
     }
 }
 
 void IOSerial::send(const QByteArray &data) {
     if (m_fd) {
         write(m_fd, data.data(), data.size());
     } else {
         emit error(Refuse, tr("Not connected"));
     }
 }
 
 void IOSerial::close() {
     if (m_fd) {
         delete m_read;
         delete m_error;
         ::close(m_fd);
         m_fd = 0;
         m_connected = false;
     } else {
         m_connected = false;
         emit error(Refuse, tr("Not connected"));
     }
 }
 
 bool IOSerial::open() {
     if (!m_fd) {
         struct termios tty;
         m_fd = ::open(m_device, O_RDWR | O_NOCTTY | O_NONBLOCK);
         if (m_fd < 0) {
             emit error(CouldNotOpen, strerror(errno));
+            m_fd = 0;
             return FALSE;
         }
         tcgetattr(m_fd, &tty);
 
         /* Baud rate */
         int speed = baud(m_baud);
         if (speed == -1) {
             emit error(Refuse, tr("Invalid baud rate"));
         }
         cfsetospeed(&tty, speed);
         cfsetispeed(&tty, speed);
 
         /* Take care of Space / Mark parity */
         if (m_dbits == 7 && (m_parity == ParitySpace || m_parity == ParityMark)) {
             m_dbits = 8;
         }
 
         /* Data bits */
         switch (m_dbits) {
             case 5: tty.c_cflag = (tty.c_cflag & ~CSIZE) | CS5; break;
             case 6: tty.c_cflag = (tty.c_cflag & ~CSIZE) | CS6; break;
             case 7: tty.c_cflag = (tty.c_cflag & ~CSIZE) | CS7; break;
             case 8: tty.c_cflag = (tty.c_cflag & ~CSIZE) | CS8; break;
 	    default: break;
         }
 
         /* Raw, no echo mode */
         tty.c_iflag =  IGNBRK;
         tty.c_lflag = 0;
         tty.c_oflag = 0;
         tty.c_cflag |= CLOCAL | CREAD;
 
         /* Stop bits */
         if (m_sbits == 2) {
             tty.c_cflag |= CSTOPB;
         } else {
             tty.c_cflag &= ~CSTOPB;
         }
 
         tty.c_cc[VMIN] = 1;
         tty.c_cc[VTIME] = 5;
 
         /* Flow control */
         if (m_flow & FlowSW)
             tty.c_iflag |= IXON | IXOFF;
         else
             tty.c_iflag &= ~(IXON|IXOFF|IXANY);
 
         if (m_flow & FlowHW)
             tty.c_cflag |= CRTSCTS;
         else
             tty.c_cflag &= ~CRTSCTS;
 
         /* Parity */
         tty.c_cflag &= ~(PARENB | PARODD);
         if (m_parity & ParityEven)
             tty.c_cflag |= PARENB;
         else if (m_parity & ParityOdd)
             tty.c_cflag |= (PARENB | PARODD);
 
         /* Set the changes */
         tcsetattr(m_fd, TCSANOW, &tty);
 
         /* Notifications on read & errors */
         m_read = new QSocketNotifier(m_fd, QSocketNotifier::Read, this);
         m_error = new QSocketNotifier(m_fd, QSocketNotifier::Exception, this);
         connect(m_read, SIGNAL(activated(int)), this, SLOT(dataArrived()));
         connect(m_error, SIGNAL(activated(int)), this, SLOT(errorOccured()));
         m_connected = false;
         return TRUE;
     } else {
         emit error(Refuse, tr("Device is already connected"));
         m_fd = 0;
         return FALSE;
     }
 }
 
 void IOSerial::reload(const Profile &config) {
     m_device = config.readEntry("Device", SERIAL_DEFAULT_DEVICE);
     m_baud = config.readNumEntry("Speed", SERIAL_DEFAULT_BAUD);
     m_parity = config.readNumEntry("Parity", SERIAL_DEFAULT_PARITY);
     m_dbits = config.readNumEntry("DataBits", SERIAL_DEFAULT_DBITS);
     m_sbits = config.readNumEntry("StopBits", SERIAL_DEFAULT_SBITS);
     m_flow = config.readNumEntry("Flow", SERIAL_DEFAULT_FLOW);
 
 }
 
 int IOSerial::baud(int baud) const {
     switch (baud) {
         case 300:    return B300;    break;
         case 600:    return B600;    break;
         case 1200:   return B1200;   break;
         case 2400:   return B2400;   break;
         case 4800:   return B4800;   break;
         case 9600:   return B9600;   break;
         case 19200:  return B19200;  break;
         case 38400:  return B38400;  break;
         case 57600:  return B57600;  break;
         case 115200: return B115200; break;
     }
     return -1;
 }
 
 void IOSerial::errorOccured() {
     emit error(ClosedUnexpected, strerror(errno));
     close();
 }
 
 void IOSerial::dataArrived() {
     QByteArray array(4097);
 
     int len = read(m_fd, array.data(), 4096);
     if (len == 0)
         close();
     if (len < 0)
         return;
     array.resize( len );
     emit received(array);
 }
 
 QString IOSerial::identifier() const {
     return "serial";
 }
 
 QString IOSerial::name() const {
     return "RS232 Serial IO Layer";
 }
 int IOSerial::rawIO()const {
diff --git a/noncore/apps/opie-console/mainwindow.cpp b/noncore/apps/opie-console/mainwindow.cpp
index 4326609..9ccefa0 100644
--- a/noncore/apps/opie-console/mainwindow.cpp
+++ b/noncore/apps/opie-console/mainwindow.cpp
@@ -193,302 +193,306 @@ void MainWindow::initUI() {
     m_bar->insertItem( tr("Connection"), m_console );
 
     /* the scripts menu */
     m_bar->insertItem( tr("Scripts"), m_scripts );
 
     /* the settings menu */
     m_bar->insertItem( tr("Settings"), m_settings );
 
     /* and the keyboard */
     m_keyBar = new QToolBar(this);
     addToolBar( m_keyBar,  "Keyboard", QMainWindow::Top, TRUE );
     m_keyBar->setHorizontalStretchable( TRUE );
     m_keyBar->hide();
 
     m_kb = new FunctionKeyboard(m_keyBar);
     connect(m_kb, SIGNAL(keyPressed(ushort, ushort, bool, bool, bool)),
             this, SLOT(slotKeyReceived(ushort, ushort, bool, bool, bool)));
 
 
 
     m_connect->setEnabled( false );
     m_disconnect->setEnabled( false );
     m_terminate->setEnabled( false );
     m_transfer->setEnabled( false );
     m_recordScript->setEnabled( false );
     m_saveScript->setEnabled( false );
     m_runScript->setEnabled( false );
     m_fullscreen->setEnabled( false );
     m_closewindow->setEnabled( false );
 
     /*
      * connect to the menu activation
      */
     connect( m_sessionsPop, SIGNAL(activated( int ) ),
              this, SLOT(slotProfile( int ) ) );
 
     m_consoleWindow = new TabWidget( this, "blah");
     connect(m_consoleWindow, SIGNAL(activated(Session*) ),
             this, SLOT(slotSessionChanged(Session*) ) );
     setCentralWidget( m_consoleWindow );
 
 }
 
 ProfileManager* MainWindow::manager() {
     return m_manager;
 }
 TabWidget* MainWindow::tabWidget() {
     return m_consoleWindow;
 }
 void MainWindow::populateProfiles() {
     m_sessionsPop->clear();
     Profile::ValueList list = manager()->all();
     for (Profile::ValueList::Iterator it = list.begin(); it != list.end(); ++it ) {
         m_sessionsPop->insertItem( (*it).name() );
     }
 
 }
 MainWindow::~MainWindow() {
     delete m_factory;
     manager()->save();
 }
 
 MetaFactory* MainWindow::factory() {
     return m_factory;
 }
 
 Session* MainWindow::currentSession() {
     return m_curSession;
 }
 
 QList<Session> MainWindow::sessions() {
     return m_sessions;
 }
 
 void MainWindow::slotNew() {
     ProfileEditorDialog dlg(factory() );
     dlg.showMaximized();
     int ret = dlg.exec();
 
     if ( ret == QDialog::Accepted ) {
         create( dlg.profile() );
     }
 }
 
 void MainWindow::slotRecordScript() {
 /*    if (currentSession()) {
         currentSession()->emulationLayer()->startRecording();
     }
     */
 }
 
 void MainWindow::slotSaveScript() {
 /*    if (currentSession() && currentSession()->emulationLayer()->isRecording()) {
         MimeTypes types;
         QStringList script;
         script << "text/plain";
         types.insert("Script", script);
         QString filename = OFileDialog::getSaveFileName(2, "/", QString::null, types);
         if (!filename.isEmpty()) {
             currentSession()->emulationLayer()->script()->saveTo(filename);
             currentSession()->emulationLayer()->clearScript();
         }
     }
     */
 }
 
 void MainWindow::slotRunScript() {
 /*
     if (currentSession()) {
         MimeTypes types;
         QStringList script;
         script << "text/plain";
         types.insert("Script", script);
         QString filename = OFileDialog::getOpenFileName(2, "/", QString::null, types);
         if (!filename.isEmpty()) {
             Script script(DocLnk(filename).file());
             currentSession()->emulationLayer()->runScript(&script);
         }
     }
     */
 }
 
 void MainWindow::slotConnect() {
     if ( currentSession() ) {
         bool ret = currentSession()->layer()->open();
         if(!ret) QMessageBox::warning(currentSession()->widgetStack(),
                                       QObject::tr("Failed"),
                                       QObject::tr("Connecting failed for this session."));
-        m_connect->setEnabled( false );
-        m_disconnect->setEnabled( true );
+        else {
+            m_connect->setEnabled( false );
+            m_disconnect->setEnabled( true );
+        }
     }
 }
 
 void MainWindow::slotDisconnect() {
     if ( currentSession() ) {
         currentSession()->layer()->close();
         m_connect->setEnabled( true );
         m_disconnect->setEnabled( false );
     }
 }
 
 void MainWindow::slotTerminate() {
     if ( currentSession() )
         currentSession()->layer()->close();
 
     slotClose();
     /* FIXME move to the next session */
 }
 
 void MainWindow::slotConfigure() {
     ConfigDialog conf( manager()->all(), factory() );
     conf.showMaximized();
 
     int ret = conf.exec();
 
     if ( QDialog::Accepted == ret ) {
         manager()->setProfiles( conf.list() );
         manager()->save();
         populateProfiles();
     }
 }
 /*
  * we will remove
  * this window from the tabwidget
  * remove it from the list
  * delete it
  * and set the currentSession()
  */
 void MainWindow::slotClose() {
     if (!currentSession() )
         return;
 
     Session* ses = currentSession();
     qWarning("removing! currentSession %s", currentSession()->name().latin1() );
-    tabWidget()->remove( currentSession() );
+	/* set to NULL to be safe, if its needed slotSessionChanged resets it automatically */
+	m_curSession = NULL;
+    tabWidget()->remove( /*currentSession()*/ses );
     /*it's autodelete */
     m_sessions.remove( ses );
     qWarning("after remove!!");
 
     if (!currentSession() ) {
         m_connect->setEnabled( false );
         m_disconnect->setEnabled( false );
         m_terminate->setEnabled( false );
         m_transfer->setEnabled( false );
         m_recordScript->setEnabled( false );
         m_saveScript->setEnabled( false );
         m_runScript->setEnabled( false );
         m_fullscreen->setEnabled( false );
         m_closewindow->setEnabled( false );
     }
 }
 
 /*
  * We will get the name
  * Then the profile
  * and then we will make a profile
  */
 void MainWindow::slotProfile( int id) {
     Profile prof = manager()->profile( m_sessionsPop->text( id)  );
     create( prof );
 }
 void MainWindow::create( const Profile& prof ) {
     Session *ses = manager()->fromProfile( prof, tabWidget() );
 
     if((!ses) || (!ses->layer()) || (!ses->widgetStack()))
 	{
 		QMessageBox::warning(this,
 			QObject::tr("Session failed"),
 			QObject::tr("<qt>Cannot open session: Not all components were found.</qt>"));
 		//if(ses) delete ses;
 		return;
 	}
 
     m_sessions.append( ses );
     tabWidget()->add( ses );
     m_curSession = ses;
 
     // dicide if its a local term ( then no connction and no tranfer), maybe make a wrapper method out of it
     m_connect->setEnabled( true );
     m_disconnect->setEnabled( false );
     m_terminate->setEnabled( true );
     m_transfer->setEnabled( true );
     m_recordScript->setEnabled( true );
     m_saveScript->setEnabled( true );
     m_runScript->setEnabled( true );
     m_fullscreen->setEnabled( true );
     m_closewindow->setEnabled( true );
 }
 
 void MainWindow::slotTransfer()
 {
     if ( currentSession() ) {
 	TransferDialog dlg(this);
 	dlg.showMaximized();
 	dlg.exec();
     }
 }
 
 
 void MainWindow::slotOpenKeb(bool state) {
 
     if (state) m_keyBar->show();
     else m_keyBar->hide();
 
 }
 void MainWindow::slotSessionChanged( Session* ses ) {
     qWarning("changed!");
     if ( ses ) {
         m_curSession = ses;
         qDebug(QString("is connected : %1").arg(  m_curSession->layer()->isConnected() ) );
         if ( m_curSession->layer()->isConnected() ) {
             m_connect->setEnabled( false );
             m_disconnect->setEnabled( true );
         } else {
             m_connect->setEnabled( true );
             m_disconnect->setEnabled( false );
         }
     }
 }
 
 void MainWindow::slotFullscreen() {
 
     if ( m_isFullscreen ) {
         ( m_curSession->widgetStack() )->reparent( m_consoleWindow, 0, QPoint(0,0), false );
         ( m_curSession->widgetStack() )->setFrameStyle( QFrame::Panel | QFrame::Sunken );
         setCentralWidget( m_consoleWindow );
         ( m_curSession->widgetStack() )->show();
         m_fullscreen->setText( tr("Full screen") );
 
     } else {
         ( m_curSession->widgetStack() )->setFrameStyle( QFrame::NoFrame );
         ( m_curSession->widgetStack() )->reparent( 0,WStyle_Tool | WStyle_Customize | WStyle_StaysOnTop,
                                                    QPoint(0,0), false);
         ( m_curSession->widgetStack() )->resize(qApp->desktop()->width(), qApp->desktop()->height());
         ( m_curSession->widgetStack() )->setFocus();
         ( m_curSession->widgetStack() )->show();
 
         //QPushButton *cornerButton = new QPushButton( );
         //cornerButton->setPixmap( QPixmap( (const char**)menu_xpm ) );
         //connect( cornerButton, SIGNAL( pressed() ), this, SLOT( slotFullscreen() ) );
         // need teh scrollbar
         //          ( m_curSession->widgetStack() )->setCornerWidget( cornerButton );
         m_fullscreen->setText( tr("Stop full screen") );
     }
 
     m_isFullscreen = !m_isFullscreen;
 
 }
 
 
 void MainWindow::slotKeyReceived(ushort u, ushort q, bool, bool, bool) {
 
     qWarning("received key event! relay to TE widget");
 
     if ( m_curSession ) {
         QKeyEvent ke(QEvent::KeyPress, q, u, 0);
 
         ke.ignore();
         // where should i send this event? doesnt work sending it here
         QApplication::sendEvent((QObject *)m_curSession->widgetStack(), &ke);
     }
 }