Shit .. missed a wrong ")".. Odevice compiles now.. !

1 files changed, 1 insertions, 1 deletions

diff --git a/libopie/odevice.cpp b/libopie/odevice.cpp
index 58254a7..71ed9e4 100644
--- a/libopie/odevice.cpp
+++ b/libopie/odevice.cpp
@@ -1334,385 +1334,385 @@ bool iPAQ::filter ( int /*unicode*/, int keycode, int modifiers, bool isPress, b
 			newkeycode = Key_unknown;
 			break;
 		}
 	}
 
 	if ( newkeycode != keycode ) {
 		if ( newkeycode != Key_unknown )
 			QWSServer::sendKeyEvent ( -1, newkeycode, modifiers, isPress, autoRepeat );
 		return true;
 	}
 	else
 		return false;
 }
 
 void iPAQ::timerEvent ( QTimerEvent * )
 {
 	killTimer ( m_power_timer );
 	m_power_timer = 0;
 	QWSServer::sendKeyEvent ( -1, HardKey_Backlight, 0, true, false );
 	QWSServer::sendKeyEvent ( -1, HardKey_Backlight, 0, false, false );
 }
 
 
 void iPAQ::alarmSound ( )
 {
 #ifndef QT_NO_SOUND
 	static Sound snd ( "alarm" );
 	int fd;
 	int vol;
 	bool vol_reset = false;
 
 	if (( fd = ::open ( "/dev/sound/mixer", O_RDWR )) >= 0 ) {
 		if ( ::ioctl ( fd, MIXER_READ( 0 ), &vol ) >= 0 ) {
 			Config cfg ( "qpe" );
 			cfg. setGroup ( "Volume" );
 
  			int volalarm = cfg. readNumEntry ( "AlarmPercent", 50 );
 			if ( volalarm < 0 )
 				volalarm = 0;
 			else if ( volalarm > 100 )
 				volalarm = 100;
 			volalarm |= ( volalarm << 8 );
 
 			if ( ::ioctl ( fd, MIXER_WRITE( 0 ), &volalarm ) >= 0 )
 				vol_reset = true;
 		}
 	}
 
 	snd. play ( );
 	while ( !snd. isFinished ( ))
 		qApp-> processEvents ( );
 
 	if ( fd >= 0 ) {
 		if ( vol_reset )
 			::ioctl ( fd, MIXER_WRITE( 0 ), &vol );
 		::close ( fd );
 	}
 #endif
 }
 
 
 bool iPAQ::setSoftSuspend ( bool soft )
 {
 	bool res = false;
 	int fd;
 
 	if (( fd = ::open ( "/proc/sys/ts/suspend_button_mode", O_WRONLY )) >= 0 ) {
 		if ( ::write ( fd, soft ? "1" : "0", 1 ) == 1 )
 			res = true;
 		else
 			::perror ( "write to /proc/sys/ts/suspend_button_mode" );
 
 		::close ( fd );
 	}
 	else
 		::perror ( "/proc/sys/ts/suspend_button_mode" );
 
 	return res;
 }
 
 
 bool iPAQ::setDisplayBrightness ( int bright )
 {
 	bool res = false;
 	int fd;
 
 	if ( bright > 255 )
 		bright = 255;
 	if ( bright < 0 )
 		bright = 0;
 
 	if (( fd = ::open ( "/dev/touchscreen/0", O_WRONLY )) >= 0 ) {
 		FLITE_IN bl;
 		bl. mode = 1;
 		bl. pwr = bright ? 1 : 0;
 		bl. brightness = ( bright * ( displayBrightnessResolution ( ) - 1 ) + 127 ) / 255;
 		res = ( ::ioctl ( fd, FLITE_ON, &bl ) == 0 );
 		::close ( fd );
 	}
 	return res;
 }
 
 int iPAQ::displayBrightnessResolution ( ) const
 {
 	switch ( model ( )) {
 		case Model_iPAQ_H31xx:
 		case Model_iPAQ_H36xx:
 		case Model_iPAQ_H37xx:
 			return 128;  	// really 256, but >128 could damage the LCD
 
 		case Model_iPAQ_H38xx:
 		case Model_iPAQ_H39xx:
 			return 64;
 		case Model_iPAQ_H5xxx:
 			return 255;
 
 		default:
 			return 2;
 	}
 }
 
 
 bool iPAQ::hasLightSensor ( ) const
 {
 	return true;
 }
 
 int iPAQ::readLightSensor ( )
 {
 	int fd;
 	int val = -1;
 
 	if (( fd = ::open ( "/proc/hal/light_sensor", O_RDONLY )) >= 0 ) {
 		char buffer [8];
 
 		if ( ::read ( fd, buffer, 5 ) == 5 ) {
 			char *endptr;
 
 			buffer [4] = 0;
 			val = ::strtol ( buffer + 2, &endptr, 16 );
 
 			if ( *endptr != 0 )
 				val = -1;
 		}
 		::close ( fd );
 	}
 
 	return val;
 }
 
 int iPAQ::lightSensorResolution ( ) const
 {
 	return 256;
 }
 
 /**************************************************
  *
  * Zaurus
  *
  **************************************************/
 
 // Check whether this device is the sharp zaurus..
 bool Zaurus::isZaurus()
 {
 
 	// If the special devices by embedix exist, it is quite simple: it is a Zaurus !
 	if ( QFile::exists ( "/dev/sharp_buz" ) || QFile::exists ( "/dev/sharp_led" ) ){
 		return true;
 	}	
 
 	// On non-embedix kernels, we have to look closer.
 	bool is_zaurus = false;
 	QFile f ( "/proc/cpuinfo" );
 	if ( f. open ( IO_ReadOnly ) ) {
 		QString model;
 		QFile f ( "/proc/cpuinfo" );
 
   		QTextStream ts ( &f );
   		QString line;
   		while( line = ts. readLine ( ) ) {
   			if ( line. left ( 8 ) == "Hardware" )
   				break;
   		}
   		int loc = line. find ( ":" );
   		if ( loc != -1 )
   			model = line. mid ( loc + 2 ). simplifyWhiteSpace( );
 
 		if ( model == "Sharp-Collie" 
 		     || model == "Collie" 
 		     || model == "SHARP Corgi"
 		     || model == "SHARP Shepherd" 
 		     || model == "SHARP Poodle" 
-                     || model == "SHARP Husky" )
+                     || model == "SHARP Husky"
 		   )
 			is_zaurus = true;
 
   	}
 	return is_zaurus;
 }
 
 
 void Zaurus::init ( )
 {
 	d-> m_vendorstr = "Sharp";
 	d-> m_vendor = Vendor_Sharp;
 	m_embedix = true;  // Not openzaurus means: It has an embedix kernel !
 
 	// QFile f ( "/proc/filesystems" );
 	QString model;
 
 	// It isn't a good idea to check the system configuration to 
 	// detect the distribution ! 
 	// Otherwise it may happen that any other distribution is detected as openzaurus, just
 	// because it uses a jffs2 filesystem..  
 	// (eilers)
 	// if ( f. open ( IO_ReadOnly ) && ( QTextStream ( &f ). read ( ). find ( "\tjffs2\n" ) >= 0 )) {
 	QFile f ("/etc/oz_version");
 	if ( f.exists() ){
 		d-> m_vendorstr = "OpenZaurus Team";
 		d-> m_systemstr = "OpenZaurus";
 		d-> m_system = System_OpenZaurus;
 
 		if ( f. open ( IO_ReadOnly )) {
 			QTextStream ts ( &f );
 			d-> m_sysverstr = ts. readLine ( );//. mid ( 10 );
 			f. close ( );
 		}
 
 		// Openzaurus sometimes uses the embedix kernel!
 		// => Check whether this is an embedix kernel
 		FILE *uname = popen("uname -r", "r");
 		QString line;
 		if ( f.open(IO_ReadOnly, uname) ) {
 			QTextStream ts ( &f );
 			line = ts. readLine ( );
 			int loc = line. find ( "embedix" );
 			if ( loc != -1 )
 				m_embedix = true;
 			else
 				m_embedix = false;
 			f. close ( );
 		}
 		pclose(uname);
 	}
 	else {
 		d-> m_systemstr = "Zaurus";
 		d-> m_system = System_Zaurus;
 	}
 
 	f. setName ( "/proc/cpuinfo" );
 	if ( f. open ( IO_ReadOnly ) ) {
 		QTextStream ts ( &f );
 		QString line;
 		while( line = ts. readLine ( ) ) {
 			if ( line. left ( 8 ) == "Hardware" )
 				break;
 		}
 		int loc = line. find ( ":" );
 		if ( loc != -1 )
 			model = line. mid ( loc + 2 ). simplifyWhiteSpace( );
 	}
 
 	if ( model == "SHARP Corgi" ) {
 		d-> m_model = Model_Zaurus_SLC7x0;
 		d-> m_modelstr = "Zaurus SL-C700";
 	} else if ( model == "SHARP Shepherd" ) {
 		d-> m_model = Model_Zaurus_SLC7x0;
 		d-> m_modelstr = "Zaurus SL-C750";
 	} else if ( model == "SHARP Husky" ) {
 		d-> m_model = Model_Zaurus_SLC7x0;
 		d-> m_modelstr = "Zaurus SL-C760";
 	} else if ( model == "SHARP Poodle" ) {
 		d-> m_model = Model_Zaurus_SLB600;
 		d-> m_modelstr = "Zaurus SL-B500 or SL-5600";
 	} else if ( model == "Sharp-Collie" || model == "Collie" ) {
 		d-> m_model = Model_Zaurus_SL5500;
 		d-> m_modelstr = "Zaurus SL-5500 or SL-5000d";
 	} else {
 		d-> m_model = Model_Zaurus_SL5500;
 		d-> m_modelstr = "Zaurus (Model unknown)";
 	}
 
 	bool flipstate = false;
 	switch ( d-> m_model ) {
 		case Model_Zaurus_SLA300:
 			d-> m_rotation = Rot0;
 			break;
 		case Model_Zaurus_SLC7x0:
 			// Note: need to 1) set flipstate based on physical screen orientation
 			// and 2) check to see if the user overrode the rotation direction
 			// using appearance, and if so, remove that item from the Config to
 			// ensure the rotate applet flips us back to the previous state.
 			if ( flipstate ) {
 				// 480x640
 				d-> m_rotation = Rot0;
 				d-> m_direction = CW;
 			} else {
 				// 640x480
 				d-> m_rotation = Rot270;
 				d-> m_direction = CCW;
 			}
 			break;
 		case Model_Zaurus_SLB600:
 		case Model_Zaurus_SL5500:
 		case Model_Zaurus_SL5000:
 		default:
 			d-> m_rotation = Rot270;
 			break;
 	}
 	m_leds [0] = Led_Off;
 }
 
 void Zaurus::initButtons ( )
 {
 	if ( d-> m_buttons )
 		return;
 
 	d-> m_buttons = new QValueList <ODeviceButton>;
 
 	struct z_button * pz_buttons;
 	int buttoncount;
 	switch ( d-> m_model ) {
 		case Model_Zaurus_SLC7x0:
 			pz_buttons = z_buttons_c700;
 			buttoncount = ARRAY_SIZE(z_buttons_c700);
 			break;
 		default:
 			pz_buttons = z_buttons;
 			buttoncount = ARRAY_SIZE(z_buttons);
 			break;
 	}
 
 	for ( int i = 0; i < buttoncount; i++ ) {
 		struct z_button *zb = pz_buttons + i;
 		ODeviceButton b;
 
 		b. setKeycode ( zb-> code );
 		b. setUserText ( QObject::tr ( "Button", zb-> utext ));
 		b. setPixmap ( Resource::loadPixmap ( zb-> pix ));
 		b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( zb-> fpressedservice ), 
 								  zb-> fpressedaction ));
 		b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( zb-> fheldservice ), 
 							       zb-> fheldaction ));
 
 		d-> m_buttons-> append ( b );
 	}
 
 	reloadButtonMapping ( );
 
 	QCopChannel *sysch = new QCopChannel ( "QPE/System", this );
 	connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )), 
 		  this, SLOT( systemMessage ( const QCString &, const QByteArray & )));
 }
 
 #include <unistd.h>
 #include <fcntl.h>
 #include <sys/ioctl.h>
 
 //#include <asm/sharp_char.h> // including kernel headers is evil ...
 
 #define SHARP_DEV_IOCTL_COMMAND_START 0x5680
 
 #define	SHARP_BUZZER_IOCTL_START (SHARP_DEV_IOCTL_COMMAND_START)
 #define SHARP_BUZZER_MAKESOUND   (SHARP_BUZZER_IOCTL_START)
 
 #define SHARP_BUZ_TOUCHSOUND       1  /* touch panel sound */
 #define SHARP_BUZ_KEYSOUND         2  /* key sound */
 #define SHARP_BUZ_SCHEDULE_ALARM  11  /* schedule alarm */
 
 /* --- for SHARP_BUZZER device --- */
 
 //#define	SHARP_BUZZER_IOCTL_START (SHARP_DEV_IOCTL_COMMAND_START)
 //#define SHARP_BUZZER_MAKESOUND   (SHARP_BUZZER_IOCTL_START)
 
 #define SHARP_BUZZER_SETVOLUME   (SHARP_BUZZER_IOCTL_START+1)
 #define SHARP_BUZZER_GETVOLUME   (SHARP_BUZZER_IOCTL_START+2)
 #define SHARP_BUZZER_ISSUPPORTED (SHARP_BUZZER_IOCTL_START+3)
 #define SHARP_BUZZER_SETMUTE     (SHARP_BUZZER_IOCTL_START+4)
 #define SHARP_BUZZER_STOPSOUND   (SHARP_BUZZER_IOCTL_START+5)
 
 //#define SHARP_BUZ_TOUCHSOUND       1  /* touch panel sound */
 //#define SHARP_BUZ_KEYSOUND         2  /* key sound */
 
 //#define SHARP_PDA_ILLCLICKSOUND    3  /* illegal click */
 //#define SHARP_PDA_WARNSOUND        4  /* warning occurred */