simplification and fixes for the standalone X11 build

11 files changed, 68 insertions, 35 deletions

diff --git a/noncore/net/wellenreiter/README b/noncore/net/wellenreiter/README
index ada9321..7de6a33 100644
--- a/noncore/net/wellenreiter/README
+++ b/noncore/net/wellenreiter/README
@@ -24,55 +24,54 @@ Release Notes for Opie-ALPHA Version January 2002
 To compile Wellenreiter within the Opie build environment, add the
 following directories to $OPIEDIR/Makefile, e.g. to 'NONAPPS='
 
 noncore/net/wellenreiter/libwellenreiter \
 noncore/net/wellenreiter/daemon \
 noncore/net/wellenreiter/contrib/orinoco_hopper \
 noncore/net/wellenreiter/gui
 
 ./configure and rebuild. Note that you need libpcap in your toolchain.
 
 (II) OpenZaurus Build Environment
 
 To compile Wellenreiter within the OZ build environment, add the
 following lines to $OPIEDIR/packages:
 CONFIG_WELLENREITER noncore/net/wellenreiter/libwellenreiter libwellenreiter.pro
 CONFIG_WELLENREITER noncore/net/wellenreiter/daemon daemon.pro
 CONFIG_WELLENREITER noncore/net/wellenreiter/gui gui.pro
 CONFIG_WELLENREITER noncore/net/wellenreiter/contrib/orinoco_hopper orinoco_hopper.pro
 
 make -f Makefile.test clean-configs
 cd <BUILDROOT>
 make SUBDIRS=packages/opie package
 
 (III) To compile a standalone Wellenreiter for X11, you need Qt3 and the development
-packages for Qt3, e.g. libqt3-devel. Assuming, $OPIEDIR and $QTDIR is set to Opie resp.
-Qt (e.g. /usr/lib/qt3), do the following:
-export QMAKESPEC=$OPIEDIR/mkspecs/linux-g++
-cd $OPIEDIR/noncore/net/wellenreiter
-qmake -makefile wellenreiter.pro
-make qmake
+packages for Qt3, e.g. libqt3-devel. Assuming, $QTDIR is set to your Qt-Director
+(e.g. /usr/lib/qt3), set $OPIEDIR to your installation prefix, e.g. /usr/local, then
+export QMAKESPEC=$QTDIR/mkspecs/linux-g++
+qmake "platform=x11" wellenreiter.pro
 make
+make install
 
 =====================
 =     Install       =
 =====================
 
 Alternatively, you can use our precompiled ipk. Get it from
 http://opie.net.wox.org/wellenreiter/. This also includes a recent libpcap.
 
 =====================
 =       Run         =
 =====================
 
 There are two possible modes: <Manual> and <Automatic>. I suggest, you
 start with the <Automatic> Mode. This works just using the "Start"
 and "Stop" Pushbuttons in the Wellenreiter GUI. If this doesn't work,
 then use the following strategy:
 
 1. Place card in monitor mode. This is device dependent.
 
    Caution: Don't do this while you're logged in via ssh
    or otherwise using the wireless interface - your connection
    will freeze: The card can't be used normally when sniffing!
 
    For most orinoco-based cards this can be done using either
diff --git a/noncore/net/wellenreiter/daemon/daemon.pro b/noncore/net/wellenreiter/daemon/daemon.pro
index 8943db7..33a6bb9 100644
--- a/noncore/net/wellenreiter/daemon/daemon.pro
+++ b/noncore/net/wellenreiter/daemon/daemon.pro
@@ -1,16 +1,16 @@
 DESTDIR         = $(OPIEDIR)/bin
 TEMPLATE        = app
 CONFIG          = warn_on debug
 #CONFIG         = warn_on release
 HEADERS         = source/config.hh source/daemon.hh
 SOURCES         = source/daemon.cc
 INCLUDEPATH     += ../
 DEPENDPATH      += $(OPIEDIR)/include
 LIBS            += -lpcap -lpthread -L$(OPIEDIR)/lib -lwellenreiter
 INTERFACES      = 
 TARGET          = wellenreiterd
 DEFINES         += DEBUG
 
-
-
-include ( $(OPIEDIR)/include.pro )
+!contains( platform, x11 ) {
+  include ( $(OPIEDIR)/include.pro )
+}
diff --git a/noncore/net/wellenreiter/gui/configwindow.cpp b/noncore/net/wellenreiter/gui/configwindow.cpp
index 6ea6f02..f86b109 100644
--- a/noncore/net/wellenreiter/gui/configwindow.cpp
+++ b/noncore/net/wellenreiter/gui/configwindow.cpp
@@ -1,47 +1,56 @@
 /**********************************************************************
 ** Copyright (C) 2002 Michael 'Mickey' Lauer.  All rights reserved.
 **
 ** This file is part of Opie Environment.
 **
 ** This file may be distributed and/or modified under the terms of the
 ** GNU General Public License version 2 as published by the Free Software
 ** Foundation and appearing in the file LICENSE.GPL included in the
 ** packaging of this file.
 **
 ** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
 ** WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
 **
 **********************************************************************/
 
 #include "configwindow.h"
 #include <qmap.h>
 #include <qcombobox.h>
+#include <qpushbutton.h>
 #include <qspinbox.h>
+#include <qlayout.h>
 
 WellenreiterConfigWindow::WellenreiterConfigWindow( QWidget * parent, const char * name, WFlags f )
            :WellenreiterConfigBase( parent, name, true, f )
 {
     _devicetype[ "cisco" ] = 1;
     _devicetype[ "wlan-ng" ] = 2;
     _devicetype[ "hostap" ] = 3;
     _devicetype[ "orinoco" ] = 4;
     _devicetype[ "<manual>" ] = 5;
+
+    #ifdef Q_WS_X11 // We're on X11: adding an Ok-Button for the Dialog here
+    QPushButton* okButton = new QPushButton( "ok", this );
+    okButton->show();
+    Layout5_2->addWidget( okButton ); //FIXME: rename this in configbase.ui
+    connect( okButton, SIGNAL( clicked() ), this, SLOT( accept() ) );
+    #endif
 };
 
 int WellenreiterConfigWindow::daemonDeviceType()
 {
     QString name = deviceType->currentText();
     if ( _devicetype.contains( name ) )
     {
         return _devicetype[name];
     }
     else
     {
         return 0;
     }
 };
 
 int WellenreiterConfigWindow::daemonHopInterval()
 {
     return hopInterval->cleanText().toInt();
 }
diff --git a/noncore/net/wellenreiter/gui/gui-x11.pro b/noncore/net/wellenreiter/gui/gui-x11.pro
deleted file mode 100644
index 25185fb..0000000
--- a/noncore/net/wellenreiter/gui/gui-x11.pro
+++ b/dev/null
@@ -1,15 +0,0 @@
-DESTDIR         = .
-TEMPLATE        = app
-CONFIG          = qt warn_on debug
-#CONFIG         = qt warn_on release
-HEADERS         = mainwindow.h wellenreiterbase.h wellenreiter.h scanlistitem.h scanlist.h logwindow.h hexwindow.h configwindow.h resource.h wlan.h cardconfig.h manufacturers.h
-SOURCES         = main.cpp mainwindow.cpp wellenreiterbase.cpp wellenreiter.cpp scanlistitem.cpp scanlist.cpp logwindow.cpp hexwindow.cpp configwindow.cpp resource.cpp wlan.cpp cardconfig.cpp manufacturers.cpp
-INCLUDEPATH     += ../
-DEPENDPATH      += ../
-LIBS            += -L. -lwellenreiter
-INTERFACES      = configbase.ui
-TARGET          = wellenreiter
-
-
-
-include ( $(OPIEDIR)/include.pro )
diff --git a/noncore/net/wellenreiter/gui/gui.pro b/noncore/net/wellenreiter/gui/gui.pro
index 95e9f22..822b0db 100644
--- a/noncore/net/wellenreiter/gui/gui.pro
+++ b/noncore/net/wellenreiter/gui/gui.pro
@@ -10,31 +10,40 @@ HEADERS         = wellenreiterbase.h \
                   scanlistitem.h \
                   scanlist.h \
                   logwindow.h \
                   hexwindow.h \
                   configwindow.h \
                   wlan.h \
                   cardconfig.h \
                   manufacturers.h
 
 SOURCES         = main.cpp \
                   mainwindow.cpp \
                   wellenreiterbase.cpp \
                   wellenreiter.cpp \
                   scanlistitem.cpp \
                   scanlist.cpp \
                   logwindow.cpp \
                   hexwindow.cpp \
                   configwindow.cpp \
                   wlan.cpp \
                   cardconfig.cpp \
                   manufacturers.cpp
 
 INCLUDEPATH     += $(OPIEDIR)/include ../
 DEPENDPATH      += $(OPIEDIR)/include ../
-LIBS            += -lqpe -lopie -L. -lwellenreiter
+LIBS            += -L. -lwellenreiter
 INTERFACES      = configbase.ui
 TARGET          = wellenreiter
 
+!contains( platform, x11 ) {
+  message( qws )
+  include ( $(OPIEDIR)/include.pro )
+  LIBS += -lqpe -lopie
+}
 
+contains( platform, x11 ) {
+  LIBS += -L$(OPIEDIR)/lib -Wl,-rpath,$(OPIEDIR)/lib
+  SOURCES += resource.cpp
+  HEADERS += resource.h
+}
 
-include ( $(OPIEDIR)/include.pro )
diff --git a/noncore/net/wellenreiter/gui/mainwindow.cpp b/noncore/net/wellenreiter/gui/mainwindow.cpp
index b67376c..b2d3a71 100644
--- a/noncore/net/wellenreiter/gui/mainwindow.cpp
+++ b/noncore/net/wellenreiter/gui/mainwindow.cpp
@@ -19,122 +19,143 @@
 
 #include <qcombobox.h>
 #include <qiconset.h>
 #include <qmenubar.h>
 #include <qpopupmenu.h>
 #include <qstatusbar.h>
 #include <qtoolbutton.h>
 
 #ifdef QWS
 #include <qpe/resource.h>
 #else
 #include "resource.h"
 #endif
 
 WellenreiterMainWindow::WellenreiterMainWindow( QWidget * parent, const char * name, WFlags f )
            :QMainWindow( parent, name, f )
 {
     cw = new WellenreiterConfigWindow( this );
     mw = new Wellenreiter( this );
     mw->setConfigWindow( cw );
     setCentralWidget( mw );
 
     // setup icon sets
 
-    searchIconSet = new QIconSet( Resource::loadPixmap( "wellenreiter/SearchIcon" ) );
     infoIconSet = new QIconSet( Resource::loadPixmap( "wellenreiter/InfoIcon" ) );
     settingsIconSet = new QIconSet( Resource::loadPixmap( "wellenreiter/SettingsIcon" ) );
+    #ifdef QWS
+    searchIconSet = new QIconSet( Resource::loadPixmap( "wellenreiter/SearchIcon" ) );
     cancelIconSet = new QIconSet( Resource::loadPixmap( "wellenreiter/CancelIcon" ) );
+    #else
+    startStopIconSet = new QIconSet();
+    startStopIconSet->setPixmap( Resource::loadPixmap( "wellenreiter/SearchIcon" ), QIconSet::Automatic, QIconSet::Normal, QIconSet::Off );
+    startStopIconSet->setPixmap( Resource::loadPixmap( "wellenreiter/CancelIcon" ), QIconSet::Automatic, QIconSet::Normal, QIconSet::On );
+    #endif
 
     // setup tool buttons
 
     startStopButton = new QToolButton( 0 );
     startStopButton->setAutoRaise( true );
+    #ifdef QWS
     startStopButton->setOnIconSet( *cancelIconSet );
     startStopButton->setOffIconSet( *searchIconSet );
+    #else
+    startStopButton->setIconSet( *startStopIconSet );
+    #endif
     startStopButton->setToggleButton( true );
     connect( startStopButton, SIGNAL( clicked() ), mw, SLOT( startStopClicked() ) );
     startStopButton->setEnabled( false );
 
     QToolButton* c = new QToolButton( 0 );
     c->setAutoRaise( true );
     c->setIconSet( *infoIconSet );
     c->setEnabled( false );
 
     QToolButton* d = new QToolButton( 0 );
     d->setAutoRaise( true );
     d->setIconSet( *settingsIconSet );
     connect( d, SIGNAL( clicked() ), this, SLOT( showConfigure() ) );
 
     // setup menu bar
 
     QMenuBar* mb = menuBar();
 
     QPopupMenu* file = new QPopupMenu( mb );
     file->insertItem( "&Load" );
     file->insertItem( "&Save" );
 
     QPopupMenu* view = new QPopupMenu( mb );
     view->insertItem( "&Configure" );
 
     QPopupMenu* sniffer = new QPopupMenu( mb );
     sniffer->insertItem( "&Configure" );
     sniffer->insertSeparator();
 
     int id;
 
     id = mb->insertItem( "&File", file );
     mb->setItemEnabled( id, false );
     id = mb->insertItem( "&View", view );
     mb->setItemEnabled( id, false );
     id = mb->insertItem( "&Sniffer", sniffer );
     mb->setItemEnabled( id, false );
 
+    #ifdef QWS
     mb->insertItem( startStopButton );
     mb->insertItem( c );
     mb->insertItem( d );
+    #else // Qt3 changed the insertion order. It's now totally random :(
+    mb->insertItem( d );
+    mb->insertItem( c );
+    mb->insertItem( startStopButton );
+    #endif
 
     // setup status bar (for now only on X11)
 
     #ifndef QWS
     statusBar()->message( "Ready." );
     #endif
 
 };
 
 void WellenreiterMainWindow::showConfigure()
 {
     qDebug( "show configure..." );
     cw->setCaption( tr( "Configure" ) );
+    #ifdef QWS
     cw->showMaximized();
+    #endif
     int result = cw->exec();
 
     if ( result )
     {
         // check configuration from config window
 
         const QString& interface = cw->interfaceName->currentText();
         const int cardtype = cw->daemonDeviceType();
         const int interval = cw->daemonHopInterval();
 
         if ( ( interface != "<select>" ) && ( cardtype != 0 ) )
             startStopButton->setEnabled( true );
             //TODO ...
         else
             startStopButton->setEnabled( false );
             //TODO ...
     }
 }
 
 WellenreiterMainWindow::~WellenreiterMainWindow()
 {
 
-    delete searchIconSet;
     delete infoIconSet;
     delete settingsIconSet;
+    #ifdef QWS
+    delete searchIconSet;
     delete cancelIconSet;
-
+    #else
+    delete startStopIconSet;
+    #endif
 
 };
 
 
 
diff --git a/noncore/net/wellenreiter/gui/mainwindow.h b/noncore/net/wellenreiter/gui/mainwindow.h
index 7d772a8..c21841a 100644
--- a/noncore/net/wellenreiter/gui/mainwindow.h
+++ b/noncore/net/wellenreiter/gui/mainwindow.h
@@ -14,36 +14,37 @@
 **********************************************************************/
 
 #ifndef MAINWINDOW_H
 #define MAINWINDOW_H
 
 #include <qmainwindow.h>
 
 class Wellenreiter;
 class WellenreiterConfigWindow;
 class QIconSet;
 class QToolButton;
 
 class WellenreiterMainWindow: public QMainWindow
 {
   Q_OBJECT
 
   public:
     WellenreiterMainWindow( QWidget * parent = 0, const char * name = "mainwindow", WFlags f = 0 );
     ~WellenreiterMainWindow();
 
   protected:
     Wellenreiter* mw;
     WellenreiterConfigWindow* cw;
 
+    QIconSet* startStopIconSet;
     const QIconSet* searchIconSet;
     const QIconSet* infoIconSet;
     const QIconSet* settingsIconSet;
     const QIconSet* cancelIconSet;
 
     QToolButton* startStopButton;
 
   public slots:
     void showConfigure();
 };
 
 #endif
diff --git a/noncore/net/wellenreiter/gui/resource.cpp b/noncore/net/wellenreiter/gui/resource.cpp
index fb0966a..7683329 100644
--- a/noncore/net/wellenreiter/gui/resource.cpp
+++ b/noncore/net/wellenreiter/gui/resource.cpp
@@ -1,35 +1,35 @@
 /**********************************************************************
 ** Copyright (C) 2002 Michael 'Mickey' Lauer.  All rights reserved.
 **
 ** This file is part of Opie Environment.
 **
 ** This file may be distributed and/or modified under the terms of the
 ** GNU General Public License version 2 as published by the Free Software
 ** Foundation and appearing in the file LICENSE.GPL included in the
 ** packaging of this file.
 **
 ** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
 ** WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
 **
 **********************************************************************/
 
 #include "resource.h"
 
-#define PIXMAPPATH "/usr/share/wellenreiter/pics/"
+#define PIXMAPPATH "/usr/local/share"
 
 namespace Resource
 {
 
 QPixmap loadPixmap( const QString& pix )
 {
     QString filename;
     filename.sprintf( "%s/%s.png", (const char*) PIXMAPPATH, (const char*) pix );
     QPixmap pixmap( filename );
     if ( pixmap.isNull() )
     {
         qDebug( "Wellenreiter::Resource: can't find pixmap " + filename );
     }
     return pixmap;
 };
 
 };
diff --git a/noncore/net/wellenreiter/gui/wellenreiter.cpp b/noncore/net/wellenreiter/gui/wellenreiter.cpp
index db7063b..c599bb4 100644
--- a/noncore/net/wellenreiter/gui/wellenreiter.cpp
+++ b/noncore/net/wellenreiter/gui/wellenreiter.cpp
@@ -53,49 +53,49 @@ using namespace Opie;
 #include "logwindow.h"
 #include "hexwindow.h"
 #include "configwindow.h"
 
 #include "manufacturers.h"
 
 #include <daemon/source/config.hh>
 #include <libwellenreiter/source/wl_types.hh>
 #include <libwellenreiter/source/wl_sock.hh>
 #include <libwellenreiter/source/wl_proto.hh>
 
 Wellenreiter::Wellenreiter( QWidget* parent )
     : WellenreiterBase( parent, 0, 0 ),
       daemonRunning( false ), manufacturerdb( 0 ), configwindow( 0 )
 {
 
     //
     // construct manufacturer database
     //
 
     QString manufile;
     #ifdef QWS
     manufile.sprintf( "%s/share/wellenreiter/manufacturers.dat", (const char*) QPEApplication::qpeDir() );
     #else
-    manufile.sprintf( "/home/mickey/work/opie/share/wellenreiter/manufacturers.dat" );
+    manufile.sprintf( "/usr/local/share/wellenreiter/manufacturers.dat" );
     #endif
     manufacturerdb = new ManufacturerDB( manufile );
 
     logwindow->log( "(i) Wellenreiter has been started." );
 
     //
     // detect operating system
     //
 
     #ifdef QWS
     QString sys;
     sys.sprintf( "(i) Running on '%s'.", (const char*) ODevice::inst()->systemString() );
     _system = ODevice::inst()->system();
     logwindow->log( sys );
     #endif
 
     //
     // setup socket for daemon communication, register socket notifier
     //
 
     // struct sockaddr_in sockaddr;
     daemon_fd = wl_setupsock( GUIADDR, GUIPORT, sockaddr );
     if ( daemon_fd == -1 )
     {
diff --git a/noncore/net/wellenreiter/libwellenreiter/libwellenreiter.pro b/noncore/net/wellenreiter/libwellenreiter/libwellenreiter.pro
index 58da0c1..5930c60 100644
--- a/noncore/net/wellenreiter/libwellenreiter/libwellenreiter.pro
+++ b/noncore/net/wellenreiter/libwellenreiter/libwellenreiter.pro
@@ -1,15 +1,16 @@
+DESTDIR = $(OPIEDIR)/lib
 TEMPLATE = lib
 CONFIG = warn_on debug
 VERSION = 0.2
 HEADERS = source/cardmode.hh source/wl_log.hh source/wl_proto.hh source/sniff.hh source/wl_sock.hh source/wl_types.hh
 SOURCES = source/cardmode.cc source/wl_log.cc source/wl_proto.cc source/sniff.cc source/wl_sock.cc
 
 LIBS = -lpcap
 TMAKE_CFLAGS += -D__UNIX__
 DEFINES += DEBUG
-DESTDIR = $(OPIEDIR)/lib
 TARGET = wellenreiter
 
+!contains( platform, x11 ) {
+  include ( $(OPIEDIR)/include.pro )
+}
 
-
-include ( $(OPIEDIR)/include.pro )
diff --git a/noncore/net/wellenreiter/wellenreiter.pro b/noncore/net/wellenreiter/wellenreiter.pro
index dd75c8c..17d0e31 100644
--- a/noncore/net/wellenreiter/wellenreiter.pro
+++ b/noncore/net/wellenreiter/wellenreiter.pro
@@ -1,6 +1,14 @@
 TEMPLATE        = subdirs
 unix:SUBDIRS    = libwellenreiter daemon gui
 
 
+!contains( platform, x11 ) {
+  message( Configuring Wellenreiter for build on Opie )
+  include ( $(OPIEDIR)/include.pro )
+}
+
+contains( platform, x11 ) {
+  message( Configuring Wellenreiter for build on Qt/X11 )
+  system( mkdir -p $OPIEDIR/lib $OPIEDIR/bin $OPIEDIR/share/pics )
+}
 
-include ( $(OPIEDIR)/include.pro )