SIMpad specific fix

1 files changed, 4 insertions, 4 deletions

diff --git a/libopie/odevice.cpp b/libopie/odevice.cpp
index 921a94e..103104f 100644
--- a/libopie/odevice.cpp
+++ b/libopie/odevice.cpp
@@ -270,65 +270,65 @@ struct s_button {
 	"devicebuttons/simpad_menu",
  	"QPE/TaskBar", "toggleMenu()",
 	"QPE/TaskBar", "toggleStartMenu()" },
     { Model_SIMpad_CL4 | Model_SIMpad_SL4 | Model_SIMpad_SLC | Model_SIMpad_TSinus,
     Qt::Key_F12, QT_TRANSLATE_NOOP("Button", "Home Button"),
 	"devicebuttons/ipaq_home",
 	"QPE/Launcher", "home()",
 	"buttonsettings", "raise()" },
 };
 
 static QCString makeChannel ( const char *str )
 {
 	if ( str && !::strchr ( str, '/' ))
 		return QCString ( "QPE/Application/" ) + str;
 	else
 		return str;
 }
 
 static inline bool isQWS()
 {
 	return qApp ? ( qApp-> type ( ) == QApplication::GuiServer ) : false;
 }
 
 ODevice *ODevice::inst ( )
 {
 	static ODevice *dev = 0;
 
 	if ( !dev ) {
 		if ( QFile::exists ( "/proc/hal/model" ))
 			dev = new iPAQ ( );
 		else if ( QFile::exists ( "/dev/sharp_buz" ) || QFile::exists ( "/dev/sharp_led" ))
 			dev = new Zaurus ( );
-		else if ( QFile::exists ( "/proc/ucb1x00" ) && QFile::exists ( "/proc/CS3" ))
+		else if ( QFile::exists ( "/proc/ucb1x00" ) && QFile::exists ( "/proc/cs3" ))
 			dev = new SIMpad ( );
 		else
 			dev = new ODevice ( );
 
 		dev-> init ( );
 	}
 	return dev;
 }
 
 
 /**************************************************
  *
  * common
  *
  **************************************************/
 
 
 ODevice::ODevice ( )
 {
 	d = new ODeviceData;
 
 	d-> m_modelstr = "Unknown";
 	d-> m_model = Model_Unknown;
 	d-> m_vendorstr = "Unknown";
 	d-> m_vendor = Vendor_Unknown;
 	d-> m_systemstr = "Unknown";
 	d-> m_system = System_Unknown;
 	d-> m_sysverstr = "0.0";
 	d-> m_rotation = Rot0;
 	d-> m_direction = CW;
 
 	d-> m_holdtime = 1000; // 1000ms
@@ -1546,65 +1546,65 @@ void SIMpad::init ( )
 
 void SIMpad::initButtons ( )
 {
 	if ( d-> m_buttons )
 		return;
 
 	if ( isQWS( ) )
 		QWSServer::setKeyboardFilter ( this );
 
 	d-> m_buttons = new QValueList <ODeviceButton>;
 
 	for ( uint i = 0; i < ( sizeof( simpad_buttons ) / sizeof( s_button )); i++ ) {
 		s_button *sb = simpad_buttons + i;
 		ODeviceButton b;
 
 		if (( sb-> model & d-> m_model ) == d-> m_model ) {
 			b. setKeycode ( sb-> code );
 			b. setUserText ( QObject::tr ( "Button", sb-> utext ));
 			b. setPixmap ( Resource::loadPixmap ( sb-> pix ));
 			b. setFactoryPresetPressedAction ( OQCopMessage ( makeChannel ( sb-> fpressedservice ), sb-> fpressedaction ));
 			b. setFactoryPresetHeldAction ( OQCopMessage ( makeChannel ( sb-> fheldservice ), sb-> fheldaction ));
 
 			d-> m_buttons-> append ( b );
 		}
 	}
 	reloadButtonMapping ( );
 
 	QCopChannel *sysch = new QCopChannel ( "QPE/System", this );
 	connect ( sysch, SIGNAL( received( const QCString &, const QByteArray & )), this, SLOT( systemMessage ( const QCString &, const QByteArray & )));
 }
 
 // SIMpad boardcontrol register CS3
-#define SIMPAD_BOARDCONTROL "/proc/CS3"
+#define SIMPAD_BOARDCONTROL "/proc/cs3"
 #define SIMPAD_VCC_5V_EN                   0x0001 // For 5V PCMCIA
 #define SIMPAD_VCC_3V_EN                   0x0002 // FOR 3.3V PCMCIA
 #define SIMPAD_EN1                         0x0004 // This is only for EPROM's
 #define SIMPAD_EN0                         0x0008 // Both should be enable for 3.3V or 5V
 #define SIMPAD_DISPLAY_ON                  0x0010
 #define SIMPAD_PCMCIA_BUFF_DIS             0x0020
 #define SIMPAD_MQ_RESET                    0x0040
 #define SIMPAD_PCMCIA_RESET                0x0080
 #define SIMPAD_DECT_POWER_ON               0x0100
 #define SIMPAD_IRDA_SD                     0x0200 // Shutdown for powersave
 #define SIMPAD_RS232_ON                    0x0400
 #define SIMPAD_SD_MEDIAQ                   0x0800 // Shutdown for powersave
 #define SIMPAD_LED2_ON                     0x1000
 #define SIMPAD_IRDA_MODE                   0x2000 // Fast/Slow IrDA mode
 #define SIMPAD_ENABLE_5V                   0x4000 // Enable 5V circuit
 #define SIMPAD_RESET_SIMCARD               0x8000
 
 //SIMpad touchscreen backlight strength control
 #define SIMPAD_BACKLIGHT_CONTROL "/proc/driver/mq200/registers/PWM_CONTROL"
 #define SIMPAD_BACKLIGHT_MASK    0x00a10044
 
 QValueList <OLed> SIMpad::ledList ( ) const
 {
 	QValueList <OLed> vl;
 	vl << Led_Power; //FIXME which LED is LED2 ? The green one or the amber one?
 	//vl << Led_Mail; //TODO find out if LED1 is accessible anyway
 	return vl;
 }
 
 QValueList <OLedState> SIMpad::ledStateList ( OLed l ) const
 {
 	QValueList <OLedState> vl;
@@ -1621,67 +1621,67 @@ OLedState SIMpad::ledState ( OLed l ) const
 	switch ( l ) {
 		case Led_Power:
 			return m_leds [0];
 		//case Led_Mail:
 		//	return m_leds [1];
 		default:
 			return Led_Off;
 	}
 }
 
 bool SIMpad::setLedState ( OLed l, OLedState st )
 {
 	static int fd = ::open ( SIMPAD_BOARDCONTROL, O_RDWR | O_NONBLOCK );
 
 	if ( l == Led_Power ) {
 		if ( fd >= 0 ) {
 			LED_IN leds;
 			::memset ( &leds, 0, sizeof( leds ));
 			leds. TotalTime  = 0;
 			leds. OnTime     = 0;
 			leds. OffTime    = 1;
 			leds. OffOnBlink = 2;
 
 			switch ( st ) {
 				case Led_Off      : leds. OffOnBlink = 0; break;
 				case Led_On       : leds. OffOnBlink = 1; break;
 				case Led_BlinkSlow: leds. OnTime = 10; leds. OffTime = 10; break;
 				case Led_BlinkFast: leds. OnTime =  5; leds. OffTime =  5; break;
 			}
 
 			{
             /*TODO Implement this like that:
-               read from CS3
+               read from cs3
                && with SIMPAD_LED2_ON
-               write to CS3 */
+               write to cs3 */
 				m_leds [0] = st;
 				return true;
 			}
 		}
 	}
 	return false;
 }
 
 
 bool SIMpad::filter ( int /*unicode*/, int keycode, int modifiers, bool isPress, bool autoRepeat )
 {
 	//TODO
 	return false;
 }
 
 void SIMpad::timerEvent ( QTimerEvent * )
 {
 	killTimer ( m_power_timer );
 	m_power_timer = 0;
 	QWSServer::sendKeyEvent ( -1, HardKey_Backlight, 0, true, false );
 	QWSServer::sendKeyEvent ( -1, HardKey_Backlight, 0, false, false );
 }
 
 
 void SIMpad::alarmSound ( )
 {
 #ifndef QT_NO_SOUND
 	static Sound snd ( "alarm" );
 	int fd;
 	int vol;
 	bool vol_reset = false;