- removed the libpreload stuff from global.cpp

 - added qt_override.* which provides the same functionality as libpreload
   (the new -override patch for Qt/E is needed for this to work/compile)
 - changed qpeapplication a bit to accomodate the new interface

6 files changed, 209 insertions, 43 deletions

diff --git a/library/global.cpp b/library/global.cpp
index 2162e02..d6ba84f 100644
--- a/library/global.cpp
+++ b/library/global.cpp
@@ -222,599 +222,585 @@ static QString dictDir()
   \internal
 */
 Global::Global()
 {
 }
 
 /*!
   Returns the unchangeable QDawg that contains general
   words for the current locale.
 
   \sa addedDawg()
 */
 const QDawg& Global::fixedDawg()
 {
     if ( !fixed_dawg ) {
 	if ( !docDirCreated )
 	    createDocDir();
 
 	fixed_dawg = new QDawg;
 	QString dawgfilename = dictDir() + "/dawg";
 	QString words_lang;
 	QStringList langs = Global::languageList();
 	for (QStringList::ConstIterator it = langs.begin(); it!=langs.end(); ++it) {
 	    QString lang = *it;
 	    words_lang = dictDir() + "/words." + lang;
 	    QString dawgfilename_lang = dawgfilename + "." + lang;
 	    if ( QFile::exists(dawgfilename_lang) ||
 		 QFile::exists(words_lang) ) {
 		dawgfilename = dawgfilename_lang;
 		break;
 	    }
 	}
 	QFile dawgfile(dawgfilename);
 
 	if ( !dawgfile.exists() ) {
 	    QString fn = dictDir() + "/words";
 	    if ( QFile::exists(words_lang) )
 		fn = words_lang;
 	    QFile in(fn);
 	    if ( in.open(IO_ReadOnly) ) {
 		fixed_dawg->createFromWords(&in);
 		dawgfile.open(IO_WriteOnly);
 		fixed_dawg->write(&dawgfile);
 		dawgfile.close();
 	    }
 	} else {
 	    fixed_dawg->readFile(dawgfilename);
 	}
     }
 
     return *fixed_dawg;
 }
 
 /*!
   Returns the changeable QDawg that contains general
   words for the current locale.
 
   \sa fixedDawg()
 */
 const QDawg& Global::addedDawg()
 {
     return dawg("local");
 }
 
 /*!
   Returns the QDawg with the given \a name.
   This is an application-specific word list.
 
   \a name should not contain "/".
 */
 const QDawg& Global::dawg(const QString& name)
 {
     createDocDir();
     if ( !named_dawg )
 	named_dawg = new QDict<QDawg>;
     QDawg* r = named_dawg->find(name);
     if ( !r ) {
 	r = new QDawg;
 	named_dawg->insert(name,r);
 	QString dawgfilename = applicationFileName("Dictionary", name ) + ".dawg";
 	QFile dawgfile(dawgfilename);
 	if ( dawgfile.open(IO_ReadOnly) )
 	    r->readFile(dawgfilename);
     }
     return *r;
 }
 
 /*!
   \overload
   Adds \a wordlist to the addedDawg().
 
   Note that the addition of words persists between program executions
   (they are saved in the dictionary files), so you should confirm the
   words with the user before adding them.
 */
 void Global::addWords(const QStringList& wordlist)
 {
     addWords("local",wordlist);
 }
 
 /*!
   \overload
   Adds \a wordlist to the addedDawg().
 
   Note that the addition of words persists between program executions
   (they are saved in the dictionary files), so you should confirm the
   words with the user before adding them.
 */
 void Global::addWords(const QString& dictname, const QStringList& wordlist)
 {
     QDawg& d = (QDawg&)dawg(dictname);
     QStringList all = d.allWords() + wordlist;
     d.createFromWords(all);
 
     QString dawgfilename = applicationFileName("Dictionary", dictname) + ".dawg";
     QFile dawgfile(dawgfilename);
     if ( dawgfile.open(IO_WriteOnly) ) {
 	d.write(&dawgfile);
 	dawgfile.close();
     }
 
     // #### Re-read the dawg here if we use mmap().
 
     // #### Signal other processes to re-read.
 }
 
 
 /*!
   Returns the full path for the application called \a appname, with the
   given \a filename. Returns QString::null if there was a problem creating
   the directory tree for \a appname.
   If \a filename contains "/", it is the caller's responsibility to
   ensure that those directories exist.
 */
 QString Global::applicationFileName(const QString& appname, const QString& filename)
 {
     QDir d;
     QString r = getenv("HOME");
     r += "/Applications/";
     if ( !QFile::exists( r ) )
 	if ( d.mkdir(r) == false )
 	    return QString::null;
     r += appname;
     if ( !QFile::exists( r ) )
 	if ( d.mkdir(r) == false )
 	    return QString::null;
     r += "/"; r += filename;
     return r;
 }
 
 /*!
   \internal
 */
 void Global::createDocDir()
 {
     if ( !docDirCreated ) {
 	docDirCreated = TRUE;
 	mkdir( QPEApplication::documentDir().latin1(), 0755 );
     }
 }
 
 
 /*!
   Displays a status \a message to the user. This usually appears
   in the taskbar for a short amount of time, then disappears.
 */
 void Global::statusMessage(const QString& message)
 {
 #if!defined(QT_NO_COP)
     QCopEnvelope e( "QPE/TaskBar", "message(QString)" );
     e << message;
 #endif
 }
 
 /*!
   \internal
 */
 void Global::applyStyle()
 {
 #if !defined(QT_NO_COP)
     QCopChannel::send( "QPE/System", "applyStyle()" );
 #else
     ((QPEApplication *)qApp)->applyStyle(); // apply without needing QCop for floppy version
 #endif
 }
 
 /*!
   \internal
 */
 QWidget *Global::shutdown( bool )
 {
 #if !defined(QT_NO_COP)
     QCopChannel::send( "QPE/System", "shutdown()" );
 #endif
     return 0;
 }
 
 /*!
   \internal
 */
 QWidget *Global::restart( bool )
 {
 #if !defined(QT_NO_COP)
     QCopChannel::send( "QPE/System", "restart()" );
 #endif
     return 0;
 }
 
 /*!
   Explicitly show the current input method.
 
   Input methods are indicated in the taskbar by a small icon. If the
   input method is activated (shown) then it takes up some proportion
   of the bottom of the screen, to allow the user to interact (input
   characters) with it.
 
   \sa hideInputMethod()
 */
 void Global::showInputMethod()
 {
 #if !defined(QT_NO_COP)
     QCopChannel::send( "QPE/TaskBar", "showInputMethod()" );
 #endif
 }
 
 /*!
   Explicitly hide the current input method.
 
   The current input method is still indicated in the taskbar, but no
   longer takes up screen space, and can no longer be interacted with.
 
   \sa showInputMethod()
 */
 void Global::hideInputMethod()
 {
 #if !defined(QT_NO_COP)
     QCopChannel::send( "QPE/TaskBar", "hideInputMethod()" );
 #endif
 }
 
 
 /*!
   \internal
 */
 bool Global::isBuiltinCommand( const QString &name )
 {
     if(!builtin)
 	return FALSE; // yes, it can happen
     for (int i = 0; builtin[i].file; i++) {
 	if ( builtin[i].file == name ) {
 	    return TRUE;
 	}
     }
     return FALSE;
 }
 
 Global::Command* Global::builtin=0;
 QGuardedPtr<QWidget> *Global::running=0;
 
 /*!
   \class Global::Command
   \brief The Global::Command class is internal.
   \internal
 */
 
 /*!
   \internal
 */
 void Global::setBuiltinCommands( Command* list )
 {
     if ( running )
 	delete [] running;
 
     builtin = list;
     int count = 0;
     if (!builtin)
 	return;
     while ( builtin[count].file )
 	count++;
 
     running = new QGuardedPtr<QWidget> [ count ];
 }
 
 /*!
   \internal
 */
 void Global::setDocument( QWidget* receiver, const QString& document )
 {
     Emitter emitter(receiver,document);
 }
 
 /*!
   \internal
 */
 bool Global::terminateBuiltin( const QString& n )
 {
     if (!builtin)
 	return FALSE;
     for (int i = 0; builtin[i].file; i++) {
 	if ( builtin[i].file == n ) {
 	    delete running[i];
 	    return TRUE;
 	}
     }
     return FALSE;
 }
 
 /*!
   \internal
 */
 void Global::terminate( const AppLnk* app )
 {
     //if ( terminateBuiltin(app->exec()) ) return; // maybe? haven't tried this
 
 #ifndef QT_NO_COP
     QCString channel = "QPE/Application/" + app->exec().utf8();
     if ( QCopChannel::isRegistered(channel) ) {
 	QCopEnvelope e(channel, "quit()");
     }
 #endif
 }
 
 /*!
   Low-level function to run command \a c.
 
   \warning Do not use this function. Use execute instead.
 
   \sa execute()
 */
 void Global::invoke(const QString &c)
 {
     // Convert the command line in to a list of arguments
     QStringList list = QStringList::split(QRegExp("  *"),c);
 
 #if !defined(QT_NO_COP)
     QString ap=list[0];
     // see if the application is already running
     // XXX should lock file /tmp/qcop-msg-ap
     if ( QCopChannel::isRegistered( ("QPE/Application/" + ap).latin1() ) ) {
 	// If the channel is already register, the app is already running, so show it.
 	{ QCopEnvelope env( ("QPE/Application/" + ap).latin1(), "raise()" ); }
                 
 	QCopEnvelope e("QPE/System", "notBusy(QString)" );
 	e << ap;
 	return;
     }
     // XXX should unlock file /tmp/qcop-msg-ap
     //see if it is being started
     if ( StartingAppList::isStarting( ap ) ) {
 	QCopEnvelope e("QPE/System", "notBusy(QString)" );
 	e << ap;
 	return;
     }
 
 #endif
 
 #ifdef QT_NO_QWS_MULTIPROCESS
     QMessageBox::warning( 0, "Error", "Could not find the application " + c, "Ok", 0, 0, 0, 1 );
 #else
 
     QStrList slist;
     unsigned int j;
     for ( j = 0; j < list.count(); j++ )
 	slist.append( list[j].utf8() );
 
     const char **args = new (const char *)[slist.count() + 1];
     for ( j = 0; j < slist.count(); j++ )
 	args[j] = slist.at(j);
     args[j] = NULL;
 
 #if !defined(QT_NO_COP)
     // an attempt to show a wait...
     // more logic should be used, but this will be fine for the moment...
     QCopEnvelope ( "QPE/System", "busy()" );
 #endif
 
 #ifdef HAVE_QUICKEXEC
     QString libexe = qpeDir()+"/binlib/lib"+args[0] + ".so";
     qDebug("libfile = %s", libexe.latin1() );
     if ( QFile::exists( libexe ) ) {
 	qDebug("calling quickexec %s", libexe.latin1() );
 	quickexecv( libexe.utf8().data(), (const char **)args );
     } else
 #endif
-    {
-	char *oldpre = ::getenv ( "LD_PRELOAD" );
-    	
-	QString newpre = QPEApplication::qpeDir ( ) + "/lib/libpreload.so";
-	if ( QFile::exists ( newpre )) {
-	    if ( oldpre && oldpre [0] )
-		newpre = newpre + ":" + oldpre;
-	    ::setenv ( "LD_PRELOAD", newpre. latin1( ), 1 );
-	    qDebug ( "\nPRELOADING\n" );
-	}
-	    
+    {	    
 	if ( !::vfork() ) {
 	    for ( int fd = 3; fd < 100; fd++ )
 		::close( fd );
 	    ::setpgid( ::getpid(), ::getppid() );
 	    // Try bindir first, so that foo/bar works too
 	    ::execv( qpeDir()+"/bin/"+args[0], (char * const *)args );
 	    ::execvp( args[0], (char * const *)args );
 	    _exit( -1 );
 	}
-	if ( oldpre )
-	    ::setenv ( "LD_PRELOAD", oldpre, 1 );
-	else
-	    ::unsetenv ( "LD_PRELOAD" );
     }
     StartingAppList::add( list[0] );
 #endif //QT_NO_QWS_MULTIPROCESS
 }
 
 
 /*!
   Executes the application identfied by \a c, passing \a
   document if it isn't null.
 
   Note that a better approach might be to send a QCop message to the
   application's QPE/Application/\e{appname} channel.
 */
 void Global::execute( const QString &c, const QString& document )
 {
     if ( qApp->type() != QApplication::GuiServer ) {
 	// ask the server to do the work
 #if !defined(QT_NO_COP)
 	if ( document.isNull() ) {
 	    QCopEnvelope e( "QPE/System", "execute(QString)" );
 	    e << c;
 	} else {
 	    QCopEnvelope e( "QPE/System", "execute(QString,QString)" );
 	    e << c << document;
 	}
 #endif
 	return;
     }
 
     // Attempt to execute the app using a builtin class for the app first
     // else try and find it in the bin directory
     if (builtin) {
 	for (int i = 0; builtin[i].file; i++) {
 	    if ( builtin[i].file == c ) {
 		if ( running[i] ) {
 		    if ( !document.isNull() && builtin[i].documentary )
 			setDocument(running[i], document);
 		    running[i]->raise();
 		    running[i]->show();
 		    running[i]->setActiveWindow();
 		} else {
 		    running[i] = builtin[i].func( builtin[i].maximized );
 		}
 #ifndef QT_NO_COP
 		QCopEnvelope e("QPE/System", "notBusy(QString)" );
 		e << c; // that was quick ;-)
 #endif
 		return;
 	    }
 	}
     }
 
     //Global::invoke(c, document);
 
     // Convert the command line in to a list of arguments
     QStringList list = QStringList::split(QRegExp("  *"),c);
 
 #if !defined(QT_NO_COP)
     QString ap=list[0];
 
     qDebug("executing %s", ap.latin1() );
 
     /* if need be, sending a qcop message will result in an invoke, see
        preceeding function */
     invoke( ap );
     //{ QCopEnvelope env( ("QPE/Application/" + ap).latin1(), "raise()" ); }
     if ( !document.isEmpty() ) {
 	QCopEnvelope env( ("QPE/Application/" + ap).latin1(), "setDocument(QString)" );
 	env << document;
     }
 #endif
 }
 
 /*!
   Returns the string \a s with the characters '\', '"', and '$' quoted
   by a preceeding '\'.
 
   \sa stringQuote()
 */
 QString Global::shellQuote(const QString& s)
 {
     QString r="\"";
     for (int i=0; i<(int)s.length(); i++) {
 	char c = s[i].latin1();
 	switch (c) {
 	    case '\\': case '"': case '$':
 		r+="\\";
 	}
 	r += s[i];
     }
     r += "\"";
     return r;
 }
 
 /*!
   Returns the string \a s with the characters '\' and '"' quoted by a
   preceeding '\'.
 
   \sa shellQuote()
 */
 QString Global::stringQuote(const QString& s)
 {
     QString r="\"";
     for (int i=0; i<(int)s.length(); i++) {
 	char c = s[i].latin1();
 	switch (c) {
 	    case '\\': case '"':
 		r+="\\";
 	}
 	r += s[i];
     }
     r += "\"";
     return r;
 }
 
 /*!
   Finds all documents on the system's document directories which
   match the filter \a mimefilter, and appends the resulting DocLnk
   objects to \a folder.
 */
 void Global::findDocuments(DocLnkSet* folder, const QString &mimefilter)
 {
     QString homedocs = QString(getenv("HOME")) + "/Documents";
     DocLnkSet d(homedocs,mimefilter);
     folder->appendFrom(d);
     /** let's do intellegint way of searching these files
      *  a) the user don't want to check mediums global
      *  b) the user wants to check but use the global options for it
      *  c) the user wants to check it but not this medium
      *  d) the user wants to check and this medium as well
      *
      *  In all cases we need to apply a different mimefilter to
      *  the medium.
      *  a) mimefilter.isEmpty() we need to apply the responding filter
      *     either the global or the one on the medium
      *
      *  b) mimefilter is set to an application we need to find out if the
      *     mimetypes are included in the mime mask of the medium
      */
     StorageInfo storage;
     const QList<FileSystem> &fs = storage.fileSystems();
     QListIterator<FileSystem> it ( fs );
     for ( ; it.current(); ++it ) {
       if ( (*it)->isRemovable() ) { // let's find out  if we should search on it
 	// this is a candidate look at the cf and see if we should search on it
 	QString path = (*it)->path();
 	if( !checkStorage((*it)->path() + "/.opiestorage.cf" ) )
 	  continue;
 	DocLnkSet ide( path, mimefilter );
 	folder->appendFrom(ide);
       } else if ( (*it)->disk() == "/dev/mtdblock6" || (*it)->disk() == "tmpfs" ) {
 	QString path = (*it)->path() + "/Documents";
 	DocLnkSet ide( path, mimefilter );
 	folder->appendFrom(ide);
       }
     }
 }
 
 QStringList Global::languageList()
 {
     QString lang = getenv("LANG");
     QStringList langs;
     langs.append(lang);
     int i  = lang.find(".");
     if ( i > 0 )
 	lang = lang.left( i );
     i = lang.find( "_" );
     if ( i > 0 )
 	langs.append(lang.left(i));
     return langs;
 }
 
 QStringList Global::helpPath()
 {
     QStringList path;
     QStringList langs = Global::languageList();
     for (QStringList::ConstIterator it = langs.fromLast(); it!=langs.end(); --it) {
 	QString lang = *it;
 	if ( !lang.isEmpty() )
 	    path += QPEApplication::qpeDir() + "/help/" + lang + "/html";
     }
     path += QPEApplication::qpeDir() + "/pics";
     path += QPEApplication::qpeDir() + "/help/html";
     path += QPEApplication::qpeDir() + "/docs";
 
 
     return path;
 }
 
 
 #include "global.moc"
diff --git a/library/library.pro b/library/library.pro
index 4a06550..d9538fb 100644
--- a/library/library.pro
+++ b/library/library.pro
@@ -1,143 +1,146 @@
 TEMPLATE	= lib
 CONFIG		+= qt warn_on release
 HEADERS	=   calendar.h \
 	    global.h \
 	    resource.h \
 	    xmlreader.h \
 	    mimetype.h \
 	    menubutton.h \
 	    network.h \
 	    networkinterface.h \
 	    filemanager.h \
 	    fontmanager.h \
 	    qdawg.h \
 	    datebookmonth.h \
 	    fileselector.h \
 	    fileselector_p.h \
 	    imageedit.h \
 	    qcopenvelope_qws.h \
 	    qpedecoration_qws.h \
 	    qpeapplication.h \
 	    qpestyle.h \
 	    qpedialog.h \
 	    lightstyle.h \
 	    config.h \
 	    applnk.h \
 	    sound.h \
 	    tzselect.h \
 	    qmath.h \
 	    datebookdb.h \
 	    alarmserver.h \
 	    process.h \
 	    password.h \
 	    timestring.h \
 	    fontfactoryinterface.h \
 	    fontdatabase.h \
 	    power.h \
 	    storage.h \
 	    qpemessagebox.h \
 	    timeconversion.h \
 	    qpedebug.h \
 	    qpemenubar.h \
 	    qpetoolbar.h \
 	    backend/categories.h \
 	    stringutil.h \
 	    backend/palmtoprecord.h \
             backend/task.h \
 	    backend/event.h \
 	    backend/contact.h\
 	    categorymenu.h \
 	    categoryedit_p.h \
 	    categoryselect.h \
 	    categorywidget.h \
 	ir.h \
 	backend/vobject_p.h \
 	findwidget_p.h \
 	finddialog.h \
 	lnkproperties.h \
 	windowdecorationinterface.h \
 	textcodecinterface.h \
-	imagecodecinterface.h
+	imagecodecinterface.h \
+	qt_override_p.h
+	
 SOURCES	=   calendar.cpp \
 	    global.cpp \
 	    xmlreader.cpp \
 	    mimetype.cpp \
 	    menubutton.cpp \
 	    network.cpp \
 	    networkinterface.cpp \
 	    filemanager.cpp \
 	    fontmanager.cpp \
 	    qdawg.cpp \
 	    datebookmonth.cpp \
 	    fileselector.cpp \
 	    imageedit.cpp \
 	    resource.cpp \
 	    qpedecoration_qws.cpp \
 	    qcopenvelope_qws.cpp \
 	    qpeapplication.cpp \
 	    qpestyle.cpp \
 	    qpedialog.cpp \
 	    lightstyle.cpp \
 	    config.cpp \
 	    applnk.cpp \
 	    sound.cpp \
 	    tzselect.cpp \
 	    qmath.c \
 	    datebookdb.cpp \
 	    alarmserver.cpp \
 	    password.cpp \
 	    process.cpp \
 	    process_unix.cpp \
 	    timestring.cpp \
 	    fontdatabase.cpp \
 	    power.cpp \
 	    storage.cpp \
 	    qpemessagebox.cpp \
             backend/timeconversion.cpp \
 	    qpedebug.cpp \
 	    qpemenubar.cpp \
 	    qpetoolbar.cpp \
 	    backend/categories.cpp \
 	    backend/stringutil.cpp \
 	    backend/palmtoprecord.cpp \
             backend/task.cpp \
 	    backend/event.cpp \
 	    backend/contact.cpp \
 	    categorymenu.cpp \
 	categoryedit_p.cpp \
 	categoryselect.cpp \
 	categorywidget.cpp \
 	ir.cpp \
 	backend/vcc_yacc.cpp \
 	backend/vobject.cpp \
 	findwidget_p.cpp \
 	finddialog.cpp \
-	lnkproperties.cpp
+	lnkproperties.cpp \
+	qt_override.cpp
 
 # Qt 3 compatibility
 HEADERS += quuid.h qcom.h qlibrary.h qlibrary_p.h
 SOURCES += quuid.cpp qlibrary.cpp qlibrary_unix.cpp
 INCLUDEPATH += $(OPIEDIR)/include backend
 LIBS		+= -ldl -lcrypt -lm
 INTERFACES = passwordbase_p.ui categoryeditbase_p.ui findwidgetbase_p.ui lnkpropertiesbase_p.ui
 TARGET		= qpe
 DESTDIR		= $(QTDIR)/lib$(PROJMAK)
 # This is set by configure$(OPIEDIR).
 VERSION		= 1.5.0.1
 
 TRANSLATIONS = ../i18n/de/libqpe.ts \
 	 ../i18n/en/libqpe.ts \
 	 ../i18n/es/libqpe.ts \
 	 ../i18n/fr/libqpe.ts \
 	 ../i18n/hu/libqpe.ts \
 	 ../i18n/ja/libqpe.ts \
 	 ../i18n/ko/libqpe.ts \
 	 ../i18n/no/libqpe.ts \
 	 ../i18n/pl/libqpe.ts \
 	 ../i18n/pt/libqpe.ts \
 	 ../i18n/pt_BR/libqpe.ts \
 	 ../i18n/sl/libqpe.ts \
 	 ../i18n/zh_CN/libqpe.ts \
 	 ../i18n/it/libqpe.ts \
 	 ../i18n/zh_TW/libqpe.ts \
 	 ../i18n/da/libqpe.ts
diff --git a/library/qpeapplication.cpp b/library/qpeapplication.cpp
index 7cbda92..4c93111 100644
--- a/library/qpeapplication.cpp
+++ b/library/qpeapplication.cpp
@@ -1,472 +1,474 @@
 /**********************************************************************
 ** Copyright (C) 2000-2002 Trolltech AS.  All rights reserved.
 **
 ** This file is part of the Qtopia Environment.
 **
 ** This file may be distributed and/or modified under the terms of the
 ** GNU General Public License version 2 as published by the Free Software
 ** Foundation and appearing in the file LICENSE.GPL included in the
 ** packaging of this file.
 **
 ** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
 ** WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
 **
 ** See http://www.trolltech.com/gpl/ for GPL licensing information.
 **
 ** Contact info@trolltech.com if any conditions of this licensing are
 ** not clear to you.
 **
 ** $Id$
 **
 **********************************************************************/
 #define QTOPIA_INTERNAL_LANGLIST
 #include <stdlib.h>
 #include <unistd.h>
 #include <linux/limits.h> // needed for some toolchains (PATH_MAX)
 #include <qfile.h>
 #ifdef Q_WS_QWS
 #ifndef QT_NO_COP
 #if QT_VERSION <= 231
 #define private public
 #define sendLocally processEvent
 #include "qcopenvelope_qws.h"
 #undef private
 #else
 #include "qcopenvelope_qws.h"
 #endif
 #endif
 #include <qwindowsystem_qws.h>
 #endif
 #include <qtextstream.h>
 #include <qpalette.h>
 #include <qbuffer.h>
 #include <qptrdict.h>
 #include <qregexp.h>
 #include <qdir.h>
 #include <qlabel.h>
 #include <qdialog.h>
 #include <qdragobject.h>
 #include <qtextcodec.h>
 #include <qevent.h>
 #include <qtooltip.h>
 #include <qsignal.h>
 #include "qpeapplication.h"
 #include "qpestyle.h"
 #include "styleinterface.h"
 #if QT_VERSION >= 300
 #include <qstylefactory.h>
 #else
 #include <qplatinumstyle.h>
 #include <qwindowsstyle.h>
 #include <qmotifstyle.h>
 #include <qmotifplusstyle.h>
 #include "lightstyle.h"
 
 #include <qpe/qlibrary.h>
 #endif
 #include "global.h"
 #include "resource.h"
 #if QT_VERSION <= 230 && defined(QT_NO_CODECS)
 #include "qutfcodec.h"
 #endif
 #include "config.h"
 #include "network.h"
 #ifdef QWS
 #include "fontmanager.h"
 #endif
 
 #include "alarmserver.h"
 #include "applnk.h"
 #include "qpemenubar.h"
 #include "textcodecinterface.h"
 #include "imagecodecinterface.h"
 
 #include <unistd.h>
 #include <sys/file.h>
 #include <sys/ioctl.h>
 #include <sys/soundcard.h>
 
+#include "qt_override_p.h"
+
 
 class QPEApplicationData
 {
 public:
 	QPEApplicationData() : presstimer( 0 ), presswidget( 0 ), rightpressed( FALSE ),
 			kbgrabber( 0 ), kbregrab( FALSE ), notbusysent( FALSE ), preloaded( FALSE ),
 			forceshow( FALSE ), nomaximize( FALSE ), qpe_main_widget( 0 ),
 			keep_running( TRUE )
 	{
 		qcopq.setAutoDelete( TRUE );
 	}
 
 	int presstimer;
 	QWidget* presswidget;
 	QPoint presspos;
 bool rightpressed :
 	1; // AEH why not use uint foobar :1; if it's tt style -zecke
 	int kbgrabber;
 bool kbregrab :
 	1;
 bool notbusysent :
 	1;
 	QString appName;
 	struct QCopRec
 	{
 		QCopRec( const QCString &ch, const QCString &msg,
 		         const QByteArray &d ) :
 				channel( ch ), message( msg ), data( d )
 		{ }
 
 		QCString channel;
 		QCString message;
 		QByteArray data;
 	};
 bool preloaded :
 	1;
 bool forceshow :
 	1;
 bool nomaximize :
 	1;
 	QWidget* qpe_main_widget;
 bool keep_running :
 	1;
 	QList<QCopRec> qcopq;
 
 	void enqueueQCop( const QCString &ch, const QCString &msg,
 	                  const QByteArray &data )
 	{
 		qcopq.append( new QCopRec( ch, msg, data ) );
 	}
 	void sendQCopQ()
 	{
 		QCopRec * r;
 #ifndef QT_NO_COP
 
 		for ( QListIterator<QCopRec> it( qcopq ); ( r = it.current() ); ++it )
 			QCopChannel::sendLocally( r->channel, r->message, r->data );
 #endif
 
 		qcopq.clear();
 	}
 	static void show_mx(QWidget* mw, bool nomaximize)
 	{
 		if ( mw->layout() && mw->inherits("QDialog") ) {
 			QPEApplication::showDialog((QDialog*)mw, nomaximize);
 		}
 		else {
 #ifdef Q_WS_QWS
 			if ( !nomaximize )
 				mw->showMaximized();
 			else
 #endif
 
 				mw->show();
 		}
 	}
 	static bool setWidgetCaptionFromAppName( QWidget* /*mw*/, const QString& /*appName*/, const QString& /*appsPath*/ )
 	{
 		/*
 		// This works but disable it for now until it is safe to apply
 		// What is does is scan the .desktop files of all the apps for
 		// the applnk that has the corresponding argv[0] as this program
 		// then it uses the name stored in the .desktop file as the caption
 		// for the main widget. This saves duplicating translations for
 		// the app name in the program and in the .desktop files.
 
 		AppLnkSet apps( appsPath );
 
 		QList<AppLnk> appsList = apps.children();
 		for ( QListIterator<AppLnk> it(appsList); it.current(); ++it ) {
 		  if ( (*it)->exec() == appName ) {
 		mw->setCaption( (*it)->name() );
 		return TRUE;
 		  }
 		}
 		*/ 
 		return FALSE;
 	}
 
 
 	void show(QWidget* mw, bool nomax)
 	{
 		setWidgetCaptionFromAppName( mw, appName, QPEApplication::qpeDir() + "apps" );
 		nomaximize = nomax;
 		qpe_main_widget = mw;
 #ifndef QT_NO_COP
 
 		sendQCopQ();
 #endif
 
 		if ( preloaded ) {
 			if (forceshow)
 				show_mx(mw, nomax);
 		}
 		else if ( keep_running ) {
 			show_mx(mw, nomax);
 		}
 	}
 
 	void loadTextCodecs()
 	{
 		QString path = QPEApplication::qpeDir() + "/plugins/textcodecs";
 		QDir dir( path, "lib*.so" );
 		QStringList list = dir.entryList();
 		QStringList::Iterator it;
 		for ( it = list.begin(); it != list.end(); ++it ) {
 			TextCodecInterface *iface = 0;
 			QLibrary *lib = new QLibrary( path + "/" + *it );
 			if ( lib->queryInterface( IID_QtopiaTextCodec, (QUnknownInterface**)&iface ) == QS_OK && iface ) {
 				QValueList<int> mibs = iface->mibEnums();
 				for (QValueList<int>::ConstIterator i = mibs.begin(); i != mibs.end(); ++i) {
 					(void)iface->createForMib(*i);
 					// ### it exists now; need to remember if we can delete it
 				}
 			}
 			else {
 				lib->unload();
 				delete lib;
 			}
 		}
 	}
 
 	void loadImageCodecs()
 	{
 		QString path = QPEApplication::qpeDir() + "/plugins/imagecodecs";
 		QDir dir( path, "lib*.so" );
 		QStringList list = dir.entryList();
 		QStringList::Iterator it;
 		for ( it = list.begin(); it != list.end(); ++it ) {
 			ImageCodecInterface *iface = 0;
 			QLibrary *lib = new QLibrary( path + "/" + *it );
 			if ( lib->queryInterface( IID_QtopiaImageCodec, (QUnknownInterface**)&iface ) == QS_OK && iface ) {
 				QStringList formats = iface->keys();
 				for (QStringList::ConstIterator i = formats.begin(); i != formats.end(); ++i) {
 					(void)iface->installIOHandler(*i);
 					// ### it exists now; need to remember if we can delete it
 				}
 			}
 			else {
 				lib->unload();
 				delete lib;
 			}
 		}
 	}
 	QString styleName;
 	QString decorationName;
 };
 
 class ResourceMimeFactory : public QMimeSourceFactory
 {
 public:
 	ResourceMimeFactory()
 	{
 		setFilePath( Global::helpPath() );
 		setExtensionType( "html", "text/html;charset=UTF-8" );
 	}
 
 	const QMimeSource* data( const QString& abs_name ) const
 	{
 		const QMimeSource * r = QMimeSourceFactory::data( abs_name );
 		if ( !r ) {
 			int sl = abs_name.length();
 			do {
 				sl = abs_name.findRev( '/', sl - 1 );
 				QString name = sl >= 0 ? abs_name.mid( sl + 1 ) : abs_name;
 				int dot = name.findRev( '.' );
 				if ( dot >= 0 )
 					name = name.left( dot );
 				QImage img = Resource::loadImage( name );
 				if ( !img.isNull() )
 					r = new QImageDrag( img );
 			}
 			while ( !r && sl > 0 );
 		}
 		return r;
 	}
 };
 
 static int muted = 0;
 static int micMuted = 0;
 
 static void setVolume( int t = 0, int percent = -1 )
 {
 	switch ( t ) {
 		case 0: {
 				Config cfg( "qpe" );
 				cfg.setGroup( "Volume" );
 				if ( percent < 0 )
 					percent = cfg.readNumEntry( "VolumePercent", 50 );
 				int fd = 0;
 				if ( ( fd = open( "/dev/mixer", O_RDWR ) ) >= 0 ) {
 					int vol = muted ? 0 : percent;
 					// set both channels to same volume
 					vol |= vol << 8;
 					ioctl( fd, MIXER_WRITE( 0 ), &vol );
 					::close( fd );
 				}
 			}
 			break;
 	}
 }
 
 static void setMic( int t = 0, int percent = -1 )
 {
 	switch ( t ) {
 		case 0: {
 				Config cfg( "qpe" );
 				cfg.setGroup( "Volume" );
 				if ( percent < 0 )
 					percent = cfg.readNumEntry( "Mic", 50 );
 
 				int fd = 0;
 				int mic = micMuted ? 0 : percent;
 				if ( ( fd = open( "/dev/mixer", O_RDWR ) ) >= 0 ) {
 					ioctl( fd, MIXER_WRITE( SOUND_MIXER_MIC ), &mic );
 					::close( fd );
 				}
 			}
 			break;
 	}
 }
 
 
 /*!
   \class QPEApplication qpeapplication.h
   \brief The QPEApplication class implements various system services
     that are available to all Qtopia applications.
  
   Simply by using QPEApplication instead of QApplication, a standard Qt
   application becomes a Qtopia application. It automatically follows
   style changes, quits and raises, and in the
   case of \link docwidget.html document-oriented\endlink applications,
   changes the currently displayed document in response to the environment.
  
   To create a \link docwidget.html document-oriented\endlink
   application use showMainDocumentWidget(); to create a
   non-document-oriented application use showMainWidget(). The
   keepRunning() function indicates whether the application will
   continue running after it's processed the last \link qcop.html
   QCop\endlink message. This can be changed using setKeepRunning().
  
   A variety of signals are emitted when certain events occur, for
   example, timeChanged(), clockChanged(), weekChanged(),
   dateFormatChanged() and volumeChanged(). If the application receives
   a \link qcop.html QCop\endlink message on the application's
   QPE/Application/\e{appname} channel, the appMessage() signal is
   emitted. There are also flush() and reload() signals, which
   are emitted when synching begins and ends respectively - upon these
   signals, the application should save and reload any data
   files that are involved in synching. Most of these signals will initially
   be received and unfiltered through the appMessage() signal.
  
   This class also provides a set of useful static functions. The
   qpeDir() and documentDir() functions return the respective paths.
   The grabKeyboard() and ungrabKeyboard() functions are used to
   control whether the application takes control of the device's
   physical buttons (e.g. application launch keys). The stylus' mode of
   operation is set with setStylusOperation() and retrieved with
   stylusOperation(). There are also setInputMethodHint() and
   inputMethodHint() functions.
  
   \ingroup qtopiaemb
 */
 
 /*!
   \fn void QPEApplication::clientMoused()
  
   \internal
 */
 
 /*!
   \fn void QPEApplication::timeChanged();
   This signal is emitted when the time changes outside the normal
   passage of time, i.e. if the time is set backwards or forwards.
 */
 
 /*!
   \fn void QPEApplication::clockChanged( bool ampm );
  
   This signal is emitted when the user changes the clock's style. If
   \a ampm is TRUE, the user wants a 12-hour AM/PM clock, otherwise,
   they want a 24-hour clock.
 */
 
 /*!
     \fn void QPEApplication::volumeChanged( bool muted )
  
     This signal is emitted whenever the mute state is changed. If \a
     muted is TRUE, then sound output has been muted.
 */
 
 /*!
     \fn void QPEApplication::weekChanged( bool startOnMonday )
  
     This signal is emitted if the week start day is changed. If \a
     startOnMonday is TRUE then the first day of the week is Monday; if
     \a startOnMonday is FALSE then the first day of the week is
     Sunday.
 */
 
 /*!
     \fn void QPEApplication::dateFormatChanged()
  
     This signal is emitted whenever the date format is changed.
 */
 
 /*!
     \fn void QPEApplication::flush()
  
     ###
 */
 
 /*!
   \fn void QPEApplication::reload()
  
 */
 
 /*!
   \fn void QPEApplication::appMessage( const QCString& msg, const QByteArray& data )
  
   This signal is emitted when a message is received on this
   application's QPE/Application/<i>appname</i> \link qcop.html
   QCop\endlink channel.
  
   The slot to which you connect this signal uses \a msg and \a data
   in the following way:
  
 \code
      void MyWidget::receive( const QCString& msg, const QByteArray& data )
      {
        QDataStream stream( data, IO_ReadOnly );
        if ( msg == "someMessage(int,int,int)" ) {
             int a,b,c;
             stream >> a >> b >> c;
             ...
        } else if ( msg == "otherMessage(QString)" ) {
            ...
        }
     }
 \endcode
  
   \sa qcop.html
   Note that messages received here may be processed by qpe application
   and emitted as signals, such as flush() and reload().
 */
 
 /*!
   Constructs a QPEApplication just as you would construct
   a QApplication, passing \a argc, \a argv, and \a t.
  
   For applications, \a t should be the default, GuiClient. Only
   the Qtopia server passes GuiServer.
 */
 QPEApplication::QPEApplication( int & argc, char **argv, Type t )
 		: QApplication( argc, argv, t )
 {
 	d = new QPEApplicationData;
 	d->loadTextCodecs();
 	d->loadImageCodecs();
 	int dw = desktop() ->width();
 	qWarning( "Width %d", dw );
 	if ( dw < 200 ) {
 		setFont( QFont( "helvetica", 8 ) );
 		AppLnk::setSmallIconSize( 10 );
@@ -518,1241 +520,1227 @@ QPEApplication::QPEApplication( int & argc, char **argv, Type t )
 			ds >> channel >> message >> data;
 			d->enqueueQCop( channel, message, data );
 		}
 
 		flock( f.handle(), LOCK_UN );
 		f.close();
 		f.remove();
 	}
 
 	for ( int a = 0; a < argc; a++ ) {
 		if ( qstrcmp( argv[ a ], "-preload" ) == 0 ) {
 			argv[ a ] = argv[ a + 1 ];
 			a++;
 			d->preloaded = TRUE;
 			argc -= 1;
 		}
 		else if ( qstrcmp( argv[ a ], "-preload-show" ) == 0 ) {
 			argv[ a ] = argv[ a + 1 ];
 			a++;
 			d->preloaded = TRUE;
 			d->forceshow = TRUE;
 			argc -= 1;
 		}
 	}
 
 	/* overide stored arguments */
 	setArgs( argc, argv );
 
 #endif
 
 	//  qwsSetDecoration( new QPEDecoration() );
 
 #ifndef QT_NO_TRANSLATION
 
 	QStringList langs = Global::languageList();
 	for ( QStringList::ConstIterator it = langs.begin(); it != langs.end(); ++it ) {
 		QString lang = *it;
 
 		QTranslator * trans;
 		QString tfn;
 
 		trans = new QTranslator( this );
 		tfn = qpeDir() + "/i18n/" + lang + "/libqpe.qm";
 		if ( trans->load( tfn ) )
 			installTranslator( trans );
 		else
 			delete trans;
 
 		trans = new QTranslator( this );
 		tfn = qpeDir() + "/i18n/" + lang + "/" + d->appName + ".qm";
 		if ( trans->load( tfn ) )
 			installTranslator( trans );
 		else
 			delete trans;
 
 		//###language/font hack; should look it up somewhere
 #ifdef QWS
 
 		if ( lang == "ja" || lang == "zh_CN" || lang == "zh_TW" || lang == "ko" ) {
 			QFont fn = FontManager::unicodeFont( FontManager::Proportional );
 			setFont( fn );
 		}
 #endif
 
 	}
 #endif
 
 	applyStyle();
 
 	if ( type() == GuiServer ) {
 		setVolume();
 	}
 
 	installEventFilter( this );
 
 	QPEMenuToolFocusManager::initialize();
 
 #ifdef QT_NO_QWS_CURSOR
 	// if we have no cursor, probably don't want tooltips
 	QToolTip::setEnabled( FALSE );
 #endif
 }
 
 static QPtrDict<void>* inputMethodDict = 0;
 static void createInputMethodDict()
 {
 	if ( !inputMethodDict )
 		inputMethodDict = new QPtrDict<void>;
 }
 
 /*!
   Returns the currently set hint to the system as to whether
   widget \a w has any use for text input methods.
  
  
   \sa setInputMethodHint() InputMethodHint
 */
 QPEApplication::InputMethodHint QPEApplication::inputMethodHint( QWidget * w )
 {
 	if ( inputMethodDict && w )
 		return ( InputMethodHint ) ( int ) inputMethodDict->find( w );
 	return Normal;
 }
 
 /*!
   \enum QPEApplication::InputMethodHint
  
   \value Normal the application sometimes needs text input (the default).
   \value AlwaysOff the application never needs text input.
   \value AlwaysOn the application always needs text input.
 */
 
 /*!
   Hints to the system that widget \a w has use for text input methods
   as specified by \a mode.
  
   \sa inputMethodHint() InputMethodHint
 */
 void QPEApplication::setInputMethodHint( QWidget * w, InputMethodHint mode )
 {
 	createInputMethodDict();
 	if ( mode == Normal ) {
 		inputMethodDict->remove
 		( w );
 	}
 	else {
 		inputMethodDict->insert( w, ( void* ) mode );
 	}
 }
 
 class HackDialog : public QDialog
 {
 public:
 	void acceptIt()
 	{
 		accept();
 	}
 	void rejectIt()
 	{
 		reject();
 	}
 };
 
 
 void QPEApplication::mapToDefaultAction( QWSKeyEvent * ke, int key )
 {
 	// specialised actions for certain widgets. May want to
 	// add more stuff here.
 	if ( activePopupWidget() && activePopupWidget() ->inherits( "QListBox" )
 	        && activePopupWidget() ->parentWidget()
 	        && activePopupWidget() ->parentWidget() ->inherits( "QComboBox" ) )
 		key = Qt::Key_Return;
 
 	if ( activePopupWidget() && activePopupWidget() ->inherits( "QPopupMenu" ) )
 		key = Qt::Key_Return;
 
 #ifdef QWS
 
 	ke->simpleData.keycode = key;
 #endif
 }
 
 class HackWidget : public QWidget
 {
 public:
 	bool needsOk()
 	{
 		return ( getWState() & WState_Reserved1 );
 	}
 };
 
 /*!
   \internal
 */
 
 #ifdef QWS
 bool QPEApplication::qwsEventFilter( QWSEvent * e )
 {
 	if ( !d->notbusysent && e->type == QWSEvent::Focus ) {
 		if ( qApp->type() != QApplication::GuiServer ) {
 			QCopEnvelope e( "QPE/System", "notBusy(QString)" );
 			e << d->appName;
 		}
 		d->notbusysent = TRUE;
 	}
 	if ( type() == GuiServer ) {
 		switch ( e->type ) {
 			case QWSEvent::Mouse:
 				if ( e->asMouse() ->simpleData.state && !QWidget::find( e->window() ) )
 					emit clientMoused();
 				break;
 			default:
 				break;
 		}
 	}
 	if ( e->type == QWSEvent::Key ) {
 		if ( d->kbgrabber == 1 )
 			return TRUE;
 		QWSKeyEvent *ke = ( QWSKeyEvent * ) e;
 		if ( ke->simpleData.keycode == Qt::Key_F33 ) {
 			// Use special "OK" key to press "OK" on top level widgets
 			QWidget * active = activeWindow();
 			QWidget *popup = 0;
 			if ( active && active->isPopup() ) {
 				popup = active;
 				active = active->parentWidget();
 			}
 			if ( active && ( int ) active->winId() == ke->simpleData.window &&
 			        !active->testWFlags( WStyle_Customize | WType_Popup | WType_Desktop ) ) {
 				if ( ke->simpleData.is_press ) {
 					if ( popup )
 						popup->close();
 					if ( active->inherits( "QDialog" ) ) {
 						HackDialog * d = ( HackDialog * ) active;
 						d->acceptIt();
 						return TRUE;
 					}
 					else if ( ( ( HackWidget * ) active ) ->needsOk() ) {
 						QSignal s;
 						s.connect( active, SLOT( accept() ) );
 						s.activate();
 					}
 					else {
 						// do the same as with the select key: Map to the default action of the widget:
 						mapToDefaultAction( ke, Qt::Key_Return );
 					}
 				}
 			}
 		}
 		else if ( ke->simpleData.keycode == Qt::Key_F30 ) {
 			// Use special "select" key to do whatever default action a widget has
 			mapToDefaultAction( ke, Qt::Key_Space );
 		}
 		else if ( ke->simpleData.keycode == Qt::Key_Escape &&
 		          ke->simpleData.is_press ) {
 			// Escape key closes app if focus on toplevel
 			QWidget * active = activeWindow();
 			if ( active && active->testWFlags( WType_TopLevel ) &&
 			        ( int ) active->winId() == ke->simpleData.window &&
 			        !active->testWFlags( WStyle_Dialog | WStyle_Customize | WType_Popup | WType_Desktop ) ) {
 				if ( active->inherits( "QDialog" ) ) {
 					HackDialog * d = ( HackDialog * ) active;
 					d->rejectIt();
 					return TRUE;
 				}
 				else if ( strcmp( argv() [ 0 ], "embeddedkonsole" ) != 0 ) {
 					active->close();
 				}
 			}
 		}
 
 #if QT_VERSION < 231
 		// Filter out the F4/Launcher key from apps
 		// ### The launcher key may not always be F4 on all devices
 		if ( ( ( QWSKeyEvent * ) e ) ->simpleData.keycode == Qt::Key_F4 )
 			return TRUE;
 #endif
 
 	}
 	if ( e->type == QWSEvent::Focus ) {
 		QWSFocusEvent * fe = ( QWSFocusEvent* ) e;
 		QWidget* nfw = QWidget::find( e->window() );
 		if ( !fe->simpleData.get_focus ) {
 			QWidget * active = activeWindow();
 			while ( active && active->isPopup() ) {
 				active->close();
 				active = activeWindow();
 			}
 			if ( !nfw && d->kbgrabber == 2 ) {
 				ungrabKeyboard();
 				d->kbregrab = TRUE; // want kb back when we're active
 			}
 		}
 		else {
 			// make sure our modal widget is ALWAYS on top
 			QWidget *topm = activeModalWidget();
 			if ( topm ) {
 				topm->raise();
 			}
 			if ( d->kbregrab ) {
 				grabKeyboard();
 				d->kbregrab = FALSE;
 			}
 		}
 		if ( fe->simpleData.get_focus && inputMethodDict ) {
 			InputMethodHint m = inputMethodHint( QWidget::find( e->window() ) );
 			if ( m == AlwaysOff )
 				Global::hideInputMethod();
 			if ( m == AlwaysOn )
 				Global::showInputMethod();
 		}
 	}
 	return QApplication::qwsEventFilter( e );
 }
 #endif
 
 /*!
   Destroys the QPEApplication.
 */
 QPEApplication::~QPEApplication()
 {
 	ungrabKeyboard();
 #if defined(Q_WS_QWS) && !defined(QT_NO_COP)
 	// Need to delete QCopChannels early, since the display will
 	// be gone by the time we get to ~QObject().
 	delete sysChannel;
 	delete pidChannel;
 #endif
 
 	delete d;
 }
 
 /*!
   Returns <tt>$OPIEDIR/</tt>.
 */
 QString QPEApplication::qpeDir()
 {
 	const char * base = getenv( "OPIEDIR" );
 	if ( base )
 		return QString( base ) + "/";
 
 	return QString( "../" );
 }
 
 /*!
   Returns the user's current Document directory. There is a trailing "/".
   .. well, it does now,, and there's no trailing '/'
 */
 QString QPEApplication::documentDir()
 {
 	const char* base = getenv( "HOME");
 	if ( base )
 		return QString( base ) + "/Documents";
 
 	return QString( "../Documents" );
 }
 
 static int deforient = -1;
 
 /*!
   \internal
 */
 int QPEApplication::defaultRotation()
 {
 	if ( deforient < 0 ) {
 		QString d = getenv( "QWS_DISPLAY" );
 		if ( d.contains( "Rot90" ) ) {
 			deforient = 90;
 		}
 		else if ( d.contains( "Rot180" ) ) {
 			deforient = 180;
 		}
 		else if ( d.contains( "Rot270" ) ) {
 			deforient = 270;
 		}
 		else {
 			deforient = 0;
 		}
 	}
 	return deforient;
 }
 
 /*!
   \internal
 */
 void QPEApplication::setDefaultRotation( int r )
 {
 	if ( qApp->type() == GuiServer ) {
 		deforient = r;
 		setenv( "QWS_DISPLAY", QString( "Transformed:Rot%1:0" ).arg( r ).latin1(), 1 );
 		Config config("qpe");
 		config.setGroup( "Rotation" );
 		config.writeEntry( "Screen", getenv("QWS_DISPLAY") );
 	}
 	else {
 #ifndef QT_NO_COP
 		{ QCopEnvelope e( "QPE/System", "setDefaultRotation(int)" );
 			e << r;
 		}
 #endif
 
 	}
 }
 
-// exported to libpreload.so
-int opie_block_style = 0;
 
 /*!
   \internal
 */
 void QPEApplication::applyStyle()
 {
 	Config config( "qpe" );
 	config.setGroup( "Appearance" );
 	
 	// don't block ourselves ...
-	opie_block_style = 0;
-	
-	
-	static QString appname;
-	
-	if ( appname. isNull ( )) {
-		char src [32];
-		char dst [PATH_MAX + 1];
-		::sprintf ( src, "/proc/%d/exe", ::getpid ( ));
-		int l = ::readlink ( src, dst, PATH_MAX );
-		if ( l > 0 ) {
-			dst [l] = 0;
-			const char *b = ::strrchr ( dst, '/' );
-			appname = ( b ? b + 1 : dst );
-		}
-		else
-			appname = "";
-	}
-	
+	Opie::force_appearance = 0;
+		
+	static QString appname = Opie::binaryName ( );
 	
 	QStringList ex = config. readListEntry ( "NoStyle", ';' );
 	int nostyle = 0;
 	for ( QStringList::Iterator it = ex. begin ( ); it != ex. end ( ); ++it ) {
 		if ( QRegExp (( *it ). mid ( 1 ), false, true ). find ( appname, 0 ) >= 0 ) {
 			nostyle = ( *it ). left ( 1 ). toInt ( 0, 32 );
 			break;
 		}
 	}
 	                                                
 	// Widget style
 	QString style = config.readEntry( "Style", "Light" );
 	
 	// don't set a custom style
-	if ( nostyle & 0x01 )
+	if ( nostyle & Opie::Force_Style )
 		style = "Light";
 	
 	internalSetStyle ( style );
 
 	// Colors
 	QColor bgcolor( config.readEntry( "Background", "#E5E1D5" ) );
 	QColor btncolor( config.readEntry( "Button", "#D6CDBB" ) );
 	QPalette pal( btncolor, bgcolor );
 	QString color = config.readEntry( "Highlight", "#800000" );
 	pal.setColor( QColorGroup::Highlight, QColor( color ) );
 	color = config.readEntry( "HighlightedText", "#FFFFFF" );
 	pal.setColor( QColorGroup::HighlightedText, QColor( color ) );
 	color = config.readEntry( "Text", "#000000" );
 	pal.setColor( QColorGroup::Text, QColor( color ) );
 	color = config.readEntry( "ButtonText", "#000000" );
 	pal.setColor( QPalette::Active, QColorGroup::ButtonText, QColor( color ) );
 	color = config.readEntry( "Base", "#FFFFFF" );
 	pal.setColor( QColorGroup::Base, QColor( color ) );
 
 	pal.setColor( QPalette::Disabled, QColorGroup::Text,
 	              pal.color( QPalette::Active, QColorGroup::Background ).dark() );
 
 	setPalette( pal, TRUE );
 
 	// Window Decoration
 	QString dec = config.readEntry( "Decoration", "Qtopia" );
 	
 	// don't set a custom deco
-	if ( nostyle & 0x04 )
+	if ( nostyle & Opie::Force_Decoration )
 		dec = "";
 	
 	//qDebug ( "Setting Deco: %s -- old %s (%d)", dec.latin1(), d-> decorationName.latin1(), nostyle);
 	
 	if ( dec != d->decorationName ) {
 		qwsSetDecoration( new QPEDecoration( dec ) );
 		d->decorationName = dec;
 	}
 
 	// Font
 	QString ff = config.readEntry( "FontFamily", font().family() );
 	int fs = config.readNumEntry( "FontSize", font().pointSize() );
 
 	// don't set a custom font	
-	if ( nostyle & 0x02 ) {
+	if ( nostyle & Opie::Force_Font ) {
 		ff = "Helvetica";
 		fs = 10;
 	}
 	
 	setFont ( QFont ( ff, fs ), true );
 	
 	// revert to global blocking policy ...
-	opie_block_style = config. readBoolEntry ( "ForceStyle", false ) ? 0xff : 0x00;
-	opie_block_style -= nostyle;
+	Opie::force_appearance = config. readBoolEntry ( "ForceStyle", false ) ? Opie::Force_All : Opie::Force_None;
+	Opie::force_appearance &= ~nostyle;
 }
 
 void QPEApplication::systemMessage( const QCString& msg, const QByteArray& data )
 {
 #ifdef Q_WS_QWS
 	QDataStream stream( data, IO_ReadOnly );
 	if ( msg == "applyStyle()" ) {
 		applyStyle();
 	}
 	else if ( msg == "setDefaultRotation(int)" ) {
 		if ( type() == GuiServer ) {
 			int r;
 			stream >> r;
 			setDefaultRotation( r );
 		}
 	}
 	else if ( msg == "shutdown()" ) {
 		if ( type() == GuiServer )
 			shutdown();
 	}
 	else if ( msg == "quit()" ) {
 		if ( type() != GuiServer )
 			tryQuit();
 	}
 	else if ( msg == "forceQuit()" ) {
 		if ( type() != GuiServer )
 			quit();
 	}
 	else if ( msg == "restart()" ) {
 		if ( type() == GuiServer )
 			restart();
 	}
 	else if ( msg == "grabKeyboard(QString)" ) {
 		QString who;
 		stream >> who;
 		if ( who.isEmpty() )
 			d->kbgrabber = 0;
 		else if ( who != d->appName )
 			d->kbgrabber = 1;
 		else
 			d->kbgrabber = 2;
 	}
 	else if ( msg == "language(QString)" ) {
 		if ( type() == GuiServer ) {
 			QString l;
 			stream >> l;
 			QString cl = getenv( "LANG" );
 			if ( cl != l ) {
 				if ( l.isNull() )
 					unsetenv( "LANG" );
 				else
 					setenv( "LANG", l.latin1(), 1 );
 				restart();
 			}
 		}
 	}
 	else if ( msg == "timeChange(QString)" ) {
 		QString t;
 		stream >> t;
 		if ( t.isNull() )
 			unsetenv( "TZ" );
 		else
 			setenv( "TZ", t.latin1(), 1 );
 		// emit the signal so everyone else knows...
 		emit timeChanged();
 	}
 	else if ( msg == "execute(QString)" ) {
 		if ( type() == GuiServer ) {
 			QString t;
 			stream >> t;
 			Global::execute( t );
 		}
 	}
 	else if ( msg == "execute(QString,QString)" ) {
 		if ( type() == GuiServer ) {
 			QString t, d;
 			stream >> t >> d;
 			Global::execute( t, d );
 		}
 	}
 	else if ( msg == "addAlarm(QDateTime,QCString,QCString,int)" ) {
 		if ( type() == GuiServer ) {
 			QDateTime when;
 			QCString channel, message;
 			int data;
 			stream >> when >> channel >> message >> data;
 			AlarmServer::addAlarm( when, channel, message, data );
 		}
 	}
 	else if ( msg == "deleteAlarm(QDateTime,QCString,QCString,int)" ) {
 		if ( type() == GuiServer ) {
 			QDateTime when;
 			QCString channel, message;
 			int data;
 			stream >> when >> channel >> message >> data;
 			AlarmServer::deleteAlarm( when, channel, message, data );
 		}
 	}
 	else if ( msg == "clockChange(bool)" ) {
 		int tmp;
 		stream >> tmp;
 		emit clockChanged( tmp );
 	}
 	else if ( msg == "weekChange(bool)" ) {
 		int tmp;
 		stream >> tmp;
 		emit weekChanged( tmp );
 	}
 	else if ( msg == "setDateFormat(DateFormat)" ) {
 		DateFormat tmp;
 		stream >> tmp;
 		emit dateFormatChanged( tmp );
 	}
 	else if ( msg == "setVolume(int,int)" ) {
 		int t, v;
 		stream >> t >> v;
 		setVolume( t, v );
 		emit volumeChanged( muted );
 	}
 	else if ( msg == "volumeChange(bool)" ) {
 		stream >> muted;
 		setVolume();
 		emit volumeChanged( muted );
 	}
 	else if ( msg == "setMic(int,int)" ) { // Added: 2002-02-08 by Jeremy Cowgar <jc@cowgar.com>
 		int t, v;
 		stream >> t >> v;
 		setMic( t, v );
 		emit micChanged( micMuted );
 	}
 	else if ( msg == "micChange(bool)" ) { // Added: 2002-02-08 by Jeremy Cowgar <jc@cowgar.com>
 		stream >> micMuted;
 		setMic();
 		emit micChanged( micMuted );
 	}
 #endif
 }
 
 /*!
   \internal
 */
 bool QPEApplication::raiseAppropriateWindow()
 {
 	bool r = FALSE;
 	// ########## raise()ing main window should raise and set active
 	// ########## it and then all childen. This belongs in Qt/Embedded
 	QWidget *top = d->qpe_main_widget;
 	if ( !top )
 		top = mainWidget();
 	if ( top && d->keep_running ) {
 		if ( top->isVisible() )
 			r = TRUE;
 		else if (d->preloaded) {
 			// We are preloaded and not visible.. pretend we just started..
 			QCopEnvelope e("QPE/System", "fastAppShowing(QString)");
 			e << d->appName;
 		}
 
 		d->show_mx(top, d->nomaximize);
 		top->raise();
 		top->setActiveWindow();
 	}
 	QWidget *topm = activeModalWidget();
 	if ( topm && topm != top ) {
 		topm->show();
 		topm->raise();
 		topm->setActiveWindow();
 		// If we haven't already handled the fastAppShowing message
 		if (!top && d->preloaded) {
 			QCopEnvelope e("QPE/System", "fastAppShowing(QString)");
 			e << d->appName;
 		}
 		r = FALSE;
 	}
 	return r;
 }
 
 void QPEApplication::pidMessage( const QCString& msg, const QByteArray& data)
 {
 #ifdef Q_WS_QWS
 
 	if ( msg == "quit()" ) {
 		tryQuit();
 	}
 	else if ( msg == "quitIfInvisible()" ) {
 		if ( d->qpe_main_widget && !d->qpe_main_widget->isVisible() )
 			quit();
 	}
 	else if ( msg == "close()" ) {
 		hideOrQuit();
 	}
 	else if ( msg == "disablePreload()" ) {
 		d->preloaded = FALSE;
 		d->keep_running = TRUE;
 		/* so that quit will quit */
 	}
 	else if ( msg == "enablePreload()" ) {
 		if (d->qpe_main_widget)
 			d->preloaded = TRUE;
 		d->keep_running = TRUE;
 		/* so next quit won't quit */
 	}
 	else if ( msg == "raise()" ) {
 		d->keep_running = TRUE;
 		d->notbusysent = FALSE;
 		raiseAppropriateWindow();
 		// Tell the system we're still chugging along...
 		QCopEnvelope e("QPE/System", "appRaised(QString)");
 		e << d->appName;
 	}
 	else if ( msg == "flush()" ) {
 		emit flush();
 		// we need to tell the desktop
 		QCopEnvelope e( "QPE/Desktop", "flushDone(QString)" );
 		e << d->appName;
 	}
 	else if ( msg == "reload()" ) {
 		emit reload();
 	}
 	else if ( msg == "setDocument(QString)" ) {
 		d->keep_running = TRUE;
 		QDataStream stream( data, IO_ReadOnly );
 		QString doc;
 		stream >> doc;
 		QWidget *mw = mainWidget();
 		if ( !mw )
 			mw = d->qpe_main_widget;
 		if ( mw )
 			Global::setDocument( mw, doc );
 	}
 	else if ( msg == "nextView()" ) {
 		qDebug("got nextView()");
 		/*
 		  if ( raiseAppropriateWindow() )
 		*/
 		emit appMessage( msg, data);
 	}
 	else {
 		emit appMessage( msg, data);
 	}
 
 #endif
 }
 
 
 /*!
   Sets widget \a mw as the mainWidget() and shows it. For small windows,
   consider passing TRUE for \a nomaximize rather than the default FALSE.
  
   \sa showMainDocumentWidget()
 */
 void QPEApplication::showMainWidget( QWidget* mw, bool nomaximize )
 {
 	d->show(mw, nomaximize );
 }
 
 /*!
   Sets widget \a mw as the mainWidget() and shows it. For small windows,
   consider passing TRUE for \a nomaximize rather than the default FALSE.
  
   This calls designates the application as
   a \link docwidget.html document-oriented\endlink application.
  
   The \a mw widget \e must have this slot: setDocument(const QString&).
  
   \sa showMainWidget()
 */
 void QPEApplication::showMainDocumentWidget( QWidget* mw, bool nomaximize )
 {
 	if ( mw && argc() == 2 )
 		Global::setDocument( mw, QString::fromUtf8(argv()[1]) );
 
 	d->show(mw, nomaximize );
 }
 
 
 /*!
   If an application is started via a \link qcop.html QCop\endlink
   message, the application will process the \link qcop.html
   QCop\endlink message and then quit. If the application calls this
   function while processing a \link qcop.html QCop\endlink message,
   after processing its outstanding \link qcop.html QCop\endlink
   messages the application will start 'properly' and show itself.
  
   \sa keepRunning()
 */
 void QPEApplication::setKeepRunning()
 {
 	if ( qApp && qApp->inherits( "QPEApplication" ) ) {
 		QPEApplication * qpeApp = ( QPEApplication* ) qApp;
 		qpeApp->d->keep_running = TRUE;
 	}
 }
 
 /*!
   Returns TRUE if the application will quit after processing the
   current list of qcop messages; otherwise returns FALSE.
  
   \sa setKeepRunning()
 */
 bool QPEApplication::keepRunning() const
 {
 	return d->keep_running;
 }
 
 /*!
   \internal
 */
 void QPEApplication::internalSetStyle( const QString &style )
 {
 #if QT_VERSION >= 300
 	if ( style == "QPE" ) {
 		setStyle( new QPEStyle );
 	}
 	else {
 		QStyle *s = QStyleFactory::create( style );
 		if ( s )
 			setStyle( s );
 	}
 #else
 	if ( style == "Windows" ) {
 		setStyle( new QWindowsStyle );
 	}
 	else if ( style == "QPE" ) {
 		setStyle( new QPEStyle );
 	}
 	else if ( style == "Light" ) {
 		setStyle( new LightStyle );
 	}
 #ifndef QT_NO_STYLE_PLATINUM
 	else if ( style == "Platinum" ) {
 		setStyle( new QPlatinumStyle );
 	}
 #endif
 #ifndef QT_NO_STYLE_MOTIF
 	else if ( style == "Motif" ) {
 		setStyle( new QMotifStyle );
 	}
 #endif
 #ifndef QT_NO_STYLE_MOTIFPLUS
 	else if ( style == "MotifPlus" ) {
 		setStyle( new QMotifPlusStyle );
 	}
 #endif
 
 	else {
 		QStyle *sty = 0;
 		QString path = QPEApplication::qpeDir ( ) + "/plugins/styles/";
 
 		if ( style. find ( ".so" ) > 0 )
 			path += style;
 		else
 			path = path + "lib" + style. lower ( ) + ".so"; // compatibility
 
 		static QLibrary *lastlib = 0;
 		static StyleInterface *lastiface = 0;
 
 		QLibrary *lib = new QLibrary ( path );
 		StyleInterface *iface = 0;
 
 		if (( lib-> queryInterface ( IID_Style, ( QUnknownInterface ** ) &iface ) == QS_OK ) && iface )
 			sty = iface-> style ( );
 
 		if ( sty ) {
 			setStyle ( sty );
 
 			if ( lastiface )
 				lastiface-> release ( );
 			lastiface = iface;
 
 			if ( lastlib ) {
 				lastlib-> unload ( );
 				delete lastlib;
 			}
 			lastlib = lib;
 		}
 		else {
 			if ( iface )
 				iface-> release ( );
 			delete lib;
 
 			setStyle ( new LightStyle ( ));
 		}
 	}
 #endif
 }
 
 /*!
   \internal
 */
 void QPEApplication::prepareForTermination( bool willrestart )
 {
 	if ( willrestart ) {
 		// Draw a big wait icon, the image can be altered in later revisions
 		//  QWidget *d = QApplication::desktop();
 		QImage img = Resource::loadImage( "launcher/new_wait" );
 		QPixmap pix;
 		pix.convertFromImage( img.smoothScale( 1 * img.width(), 1 * img.height() ) );
 		QLabel *lblWait = new QLabel( 0, "wait hack!", QWidget::WStyle_Customize |
 		                              QWidget::WStyle_NoBorder | QWidget::WStyle_Tool );
 		lblWait->setPixmap( pix );
 		lblWait->setAlignment( QWidget::AlignCenter );
 		lblWait->show();
 		lblWait->showMaximized();
 	}
 #ifndef SINGLE_APP
 	{ QCopEnvelope envelope( "QPE/System", "forceQuit()" );
 	}
 	processEvents(); // ensure the message goes out.
 	sleep( 1 ); // You have 1 second to comply.
 #endif
 }
 
 /*!
   \internal
 */
 void QPEApplication::shutdown()
 {
 	// Implement in server's QPEApplication subclass
 }
 
 /*!
   \internal
 */
 void QPEApplication::restart()
 {
 	// Implement in server's QPEApplication subclass
 }
 
 static QPtrDict<void>* stylusDict = 0;
 static void createDict()
 {
 	if ( !stylusDict )
 		stylusDict = new QPtrDict<void>;
 }
 
 /*!
   Returns the current StylusMode for widget \a w.
  
   \sa setStylusOperation() StylusMode
 */
 QPEApplication::StylusMode QPEApplication::stylusOperation( QWidget* w )
 {
 	if ( stylusDict )
 		return ( StylusMode ) ( int ) stylusDict->find( w );
 	return LeftOnly;
 }
 
 /*!
     \enum QPEApplication::StylusMode
  
     \value LeftOnly the stylus only generates LeftButton
                        events (the default).
     \value RightOnHold the stylus generates RightButton events
                        if the user uses the press-and-hold gesture.
  
     \sa setStylusOperation() stylusOperation()
 */
 
 /*!
   Causes widget \a w to receive mouse events according to the stylus
   \a mode.
  
   \sa stylusOperation() StylusMode
 */
 void QPEApplication::setStylusOperation( QWidget * w, StylusMode mode )
 {
 	createDict();
 	if ( mode == LeftOnly ) {
 		stylusDict->remove
 		( w );
 		w->removeEventFilter( qApp );
 	}
 	else {
 		stylusDict->insert( w, ( void* ) mode );
 		connect( w, SIGNAL( destroyed() ), qApp, SLOT( removeSenderFromStylusDict() ) );
 		w->installEventFilter( qApp );
 	}
 }
 
 
 /*!
   \reimp
 */
 bool QPEApplication::eventFilter( QObject *o, QEvent *e )
 {
 	if ( stylusDict && e->type() >= QEvent::MouseButtonPress && e->type() <= QEvent::MouseMove ) {
 		QMouseEvent * me = ( QMouseEvent* ) e;
 		StylusMode mode = (StylusMode)(int)stylusDict->find(o);
 		switch (mode) {
 			case RightOnHold:
 				switch ( me->type() ) {
 					case QEvent::MouseButtonPress:
 						if ( me->button() == LeftButton ) {
 							d->presstimer = startTimer(500); // #### pref.
 							d->presswidget = (QWidget*)o;
 							d->presspos = me->pos();
 							d->rightpressed = FALSE;
 						}
 						break;
 					case QEvent::MouseMove:
 						if (d->presstimer && (me->pos() - d->presspos).manhattanLength() > 8) {
 							killTimer(d->presstimer);
 							d->presstimer = 0;
 						}
 						break;
 					case QEvent::MouseButtonRelease:
 						if ( me->button() == LeftButton ) {
 							if ( d->presstimer ) {
 								killTimer(d->presstimer);
 								d->presstimer = 0;
 							}
 							if ( d->rightpressed && d->presswidget ) {
 								// Right released
 								postEvent( d->presswidget,
 								           new QMouseEvent( QEvent::MouseButtonRelease, me->pos(),
 								                            RightButton, LeftButton + RightButton ) );
 								// Left released, off-widget
 								postEvent( d->presswidget,
 								           new QMouseEvent( QEvent::MouseMove, QPoint( -1, -1),
 								                            LeftButton, LeftButton ) );
 								postEvent( d->presswidget,
 								           new QMouseEvent( QEvent::MouseButtonRelease, QPoint( -1, -1),
 								                            LeftButton, LeftButton ) );
 								d->rightpressed = FALSE;
 								return TRUE; // don't send the real Left release
 							}
 						}
 						break;
 					default:
 						break;
 				}
 				break;
 			default:
 				;
 		}
 	}
 	else if ( e->type() == QEvent::KeyPress || e->type() == QEvent::KeyRelease ) {
 		QKeyEvent *ke = (QKeyEvent *)e;
 		if ( ke->key() == Key_Enter ) {
 			if ( o->isA( "QRadioButton" ) || o->isA( "QCheckBox" ) ) {
 				postEvent( o, new QKeyEvent( e->type(), Key_Space, ' ',
 				                             ke->state(), " ", ke->isAutoRepeat(), ke->count() ) );
 				return TRUE;
 			}
 		}
 	}
 	return FALSE;
 }
 
 /*!
   \reimp
 */
 void QPEApplication::timerEvent( QTimerEvent *e )
 {
 	if ( e->timerId() == d->presstimer && d->presswidget ) {
 		// Right pressed
 		postEvent( d->presswidget,
 		           new QMouseEvent( QEvent::MouseButtonPress, d->presspos,
 		                            RightButton, LeftButton ) );
 		killTimer( d->presstimer );
 		d->presstimer = 0;
 		d->rightpressed = TRUE;
 	}
 }
 
 void QPEApplication::removeSenderFromStylusDict()
 {
 	stylusDict->remove
 	( ( void* ) sender() );
 	if ( d->presswidget == sender() )
 		d->presswidget = 0;
 }
 
 /*!
   \internal
 */
 bool QPEApplication::keyboardGrabbed() const
 {
 	return d->kbgrabber;
 }
 
 
 /*!
   Reverses the effect of grabKeyboard(). This is called automatically
   on program exit.
 */
 void QPEApplication::ungrabKeyboard()
 {
 	QPEApplicationData * d = ( ( QPEApplication* ) qApp ) ->d;
 	if ( d->kbgrabber == 2 ) {
 #ifndef QT_NO_COP
 		QCopEnvelope e( "QPE/System", "grabKeyboard(QString)" );
 		e << QString::null;
 #endif
 
 		d->kbregrab = FALSE;
 		d->kbgrabber = 0;
 	}
 }
 
 /*!
   Grabs the physical keyboard keys, e.g. the application's launching
   keys. Instead of launching applications when these keys are pressed
   the signals emitted are sent to this application instead. Some games
   programs take over the launch keys in this way to make interaction
   easier.
  
   \sa ungrabKeyboard()
 */
 void QPEApplication::grabKeyboard()
 {
 	QPEApplicationData * d = ( ( QPEApplication* ) qApp ) ->d;
 	if ( qApp->type() == QApplication::GuiServer )
 		d->kbgrabber = 0;
 	else {
 #ifndef QT_NO_COP
 		QCopEnvelope e( "QPE/System", "grabKeyboard(QString)" );
 		e << d->appName;
 #endif
 
 		d->kbgrabber = 2; // me
 	}
 }
 
 /*!
   \reimp
 */
 int QPEApplication::exec()
 {
 #ifndef QT_NO_COP
 	d->sendQCopQ();
 #endif
 
 	if ( d->keep_running )
 		//|| d->qpe_main_widget && d->qpe_main_widget->isVisible() )
 		return QApplication::exec();
 
 #ifndef QT_NO_COP
 
 	{
 		QCopEnvelope e( "QPE/System", "closing(QString)" );
 		e << d->appName;
 	}
 #endif
 	processEvents();
 	return 0;
 }
 
 /*!
   \internal
   External request for application to quit.  Quits if possible without
   loosing state.
 */
 void QPEApplication::tryQuit()
 {
 	if ( activeModalWidget() || strcmp( argv() [ 0 ], "embeddedkonsole" ) == 0 )
 		return ; // Inside modal loop or konsole. Too hard to save state.
 #ifndef QT_NO_COP
 
 	{
 		QCopEnvelope e( "QPE/System", "closing(QString)" );
 		e << d->appName;
 	}
 #endif
 	processEvents();
 
 	quit();
 }
 
 /*!
   \internal
   User initiated quit.  Makes the window 'Go Away'.  If preloaded this means
   hiding the window.  If not it means quitting the application.
   As this is user initiated we don't need to check state.
 */
 void QPEApplication::hideOrQuit()
 {
 	processEvents();
 
 	// If we are a preloaded application we don't actually quit, so emit
 	// a System message indicating we're quasi-closing.
 	if ( d->preloaded && d->qpe_main_widget )
 #ifndef QT_NO_COP
 
 	{
 		QCopEnvelope e("QPE/System", "fastAppHiding(QString)" );
 		e << d->appName;
 		d->qpe_main_widget->hide();
 	}
 #endif
 	else
 		quit();
 }
 
+
+// These 6 stubs below need 1.5K in the binary and besides that -
+// we are not using ancient toolchains anymore     - sandman
+
 #if defined(QT_QWS_IPAQ) || defined(QT_QWS_SHARP)
 
 // The libraries with the skiff package (and possibly others) have
 // completely useless implementations of builtin new and delete that
 // use about 50% of your CPU. Here we revert to the simple libc
 // functions.
 
 void* operator new[]( size_t size )
 {
 	return malloc( size );
 }
 
 void* operator new( size_t size )
 {
 	return malloc( size );
 }
 
 void operator delete[]( void* p )
 {
 	free( p );
 }
 
 void operator delete[]( void* p, size_t /*size*/ )
 {
 	free( p );
 }
 
 void operator delete( void* p )
 {
 	free( p );
 }
 
 void operator delete( void* p, size_t /*size*/ )
 {
 	free( p );
 }
 
 #endif
 
 #if ( QT_VERSION <= 230 ) && !defined(SINGLE_APP)
 #include <qwidgetlist.h>
 #ifdef QWS
 #include <qgfx_qws.h>
 extern QRect qt_maxWindowRect;
 void qt_setMaxWindowRect(const QRect& r )
 {
 	qt_maxWindowRect = qt_screen->mapFromDevice( r,
 	                   qt_screen->mapToDevice( QSize( qt_screen->width(), qt_screen->height() ) ) );
 	// Re-resize any maximized windows
 	QWidgetList* l = QApplication::topLevelWidgets();
 	if ( l ) {
 		QWidget * w = l->first();
 		while ( w ) {
 			if ( w->isVisible() && w->isMaximized() ) {
 				w->showMaximized();
 			}
 			w = l->next();
 		}
 		delete l;
 	}
 }
 #endif
 #endif
diff --git a/library/qpeapplication.h b/library/qpeapplication.h
index 2515f1b..86affa6 100644
--- a/library/qpeapplication.h
+++ b/library/qpeapplication.h
@@ -1,156 +1,158 @@
 /**********************************************************************
 ** Copyright (C) 2000-2002 Trolltech AS.  All rights reserved.
 **
 ** This file is part of the Qtopia Environment.
 **
 ** This file may be distributed and/or modified under the terms of the
 ** GNU General Public License version 2 as published by the Free Software
 ** Foundation and appearing in the file LICENSE.GPL included in the
 ** packaging of this file.
 **
 ** This file is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE
 ** WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
 **
 ** See http://www.trolltech.com/gpl/ for GPL licensing information.
 **
 ** Contact info@trolltech.com if any conditions of this licensing are
 ** not clear to you.
 **
 **********************************************************************/
 #ifndef __QPE_APPLICATION_H__
 #define __QPE_APPLICATION_H__
 
 
 #include <qapplication.h>
 #include <qdialog.h>
 #if defined(_WS_QWS_) && !defined(Q_WS_QWS)
 #define Q_WS_QWS
 #endif
 #include "qpedecoration_qws.h"
 #include "timestring.h"
 
 class QCopChannel;
 class QPEApplicationData;
 class QWSEvent;
 class QWSKeyEvent;
 
 class QPEApplication : public QApplication
 {
     Q_OBJECT
 public:
     QPEApplication( int& argc, char **argv, Type=GuiClient );
     ~QPEApplication();
 
     static QString qpeDir();
     static QString documentDir();
     void applyStyle();
     static int defaultRotation();
     static void setDefaultRotation(int r);
     static void grabKeyboard();
     static void ungrabKeyboard();
 
     enum StylusMode {
 	LeftOnly,
 	RightOnHold
 	// RightOnHoldLeftDelayed, etc.
     };
     static void setStylusOperation( QWidget*, StylusMode );
     static StylusMode stylusOperation( QWidget* );
 
     enum InputMethodHint {
 	Normal,
 	AlwaysOff,
 	AlwaysOn
     };
 
     enum screenSaverHint {
 	Disable = 0,
 	DisableLightOff = 1,
 	DisableSuspend = 2,
 	Enable = 100
     };
 
     static void setInputMethodHint( QWidget *, InputMethodHint );
     static InputMethodHint inputMethodHint( QWidget * );
 
     void showMainWidget( QWidget*, bool nomax=FALSE );
     void showMainDocumentWidget( QWidget*, bool nomax=FALSE );
     static void showDialog( QDialog*, bool nomax=FALSE );
     static int execDialog( QDialog*, bool nomax=FALSE );
 
     static void setKeepRunning();
     bool keepRunning() const;
 
     bool keyboardGrabbed() const;
 
     int exec();
 
 signals:
     void clientMoused();
     void timeChanged();
     void clockChanged( bool pm );
     void micChanged( bool muted );
     void volumeChanged( bool muted );
     void appMessage( const QCString& msg, const QByteArray& data);
     void weekChanged( bool startOnMonday );
     void dateFormatChanged( DateFormat );
     void flush();
     void reload();
 
 private slots:
     void systemMessage( const QCString &msg, const QByteArray &data );
     void pidMessage( const QCString &msg, const QByteArray &data );
     void removeSenderFromStylusDict();
     void hideOrQuit();
 
 protected:
     bool qwsEventFilter( QWSEvent * );
     void internalSetStyle( const QString &style );
     void prepareForTermination(bool willrestart);
     virtual void restart();
     virtual void shutdown();
     bool eventFilter( QObject *, QEvent * );
     void timerEvent( QTimerEvent * );
     bool raiseAppropriateWindow();
     virtual void tryQuit();
 
+	virtual void polish ( QWidget * ); // this is actually implemented in qt_override.cpp (!)
+
 private:
     void mapToDefaultAction( QWSKeyEvent *ke, int defKey );
 
 #if defined(Q_WS_QWS) && !defined(QT_NO_COP)
     QCopChannel *sysChannel;
     QCopChannel *pidChannel;
 #endif
     QPEApplicationData *d;
 
     bool reserved_sh;
 
 
 
 };
 
 inline void QPEApplication::showDialog( QDialog* d, bool nomax )
 {
     QSize sh = d->sizeHint();
     int w = QMAX(sh.width(),d->width());
     int h = QMAX(sh.height(),d->height());
     if ( !nomax
 	&& ( w > qApp->desktop()->width()*3/4
 	    || h > qApp->desktop()->height()*3/4 ) )
     {
 	d->showMaximized();
     } else {
 	d->resize(w,h);
 	d->show();
     }
 }
 
 inline int QPEApplication::execDialog( QDialog* d, bool nomax )
 {
     showDialog(d,nomax);
     return d->exec();
 }
 
 
 #endif
 
diff --git a/library/qt_override.cpp b/library/qt_override.cpp
new file mode 100644
index 0000000..0d783bd
--- a/dev/null
+++ b/library/qt_override.cpp
@@ -0,0 +1,166 @@
+
+#include <qpe/qpeapplication.h>
+#include <qwsdecoration_qws.h>
+#include <qcommonstyle.h>
+#include <qfontdatabase.h>
+
+#include <unistd.h>
+#include <stdlib.h>
+#include <stdio.h>
+
+#include "qt_override_p.h"
+
+
+
+struct color_fix_t {
+	char *m_app;
+	char *m_class;
+	char *m_name;
+	QColorGroup::ColorRole m_set;
+	QColorGroup::ColorRole m_get;
+};
+
+
+
+static const color_fix_t apps_that_need_special_colors [] = {
+	{ "HancomMobileWord", "HTextEdit", 0, QColorGroup::Background, QColorGroup::Base },
+	{ "neocal", "Display", 0, QColorGroup::Background, QColorGroup::Base },
+	
+	{ 0, 0, 0, QColorGroup::Base, QColorGroup::Base }
+};
+
+static const char * const apps_that_need_pointsizes_times_10 [] = {
+	"HancomMobileWord",
+	
+	0
+};
+
+
+
+
+int Opie::force_appearance = 0;
+
+
+// Return the *real* name of the binary - not just a quick guess
+// by looking at argv [0] (which could be anything)
+
+static void binaryNameFree ( )
+{
+	::free ((void *) Opie::binaryName ( )); // we need to cast away the const here
+}
+
+const char *Opie::binaryName ( )
+{
+	static const char *appname = 0;
+	
+	if ( !appname ) {
+		char dst [PATH_MAX + 1];
+		int l = ::readlink ( "/proc/self/exe", dst, PATH_MAX );
+			
+		if ( l <= 0 ) 
+			l = 0;
+			
+		dst [l] = 0;
+		const char *b = ::strrchr ( dst, '/' );
+		appname = ::strdup ( b ? b + 1 : dst );
+		
+		::atexit ( binaryNameFree );
+	}	
+	return appname;
+}
+
+
+// Fix for a toolchain incompatibility (binaries compiled with 
+// old tcs using shared libs compiled with newer tcs)
+
+extern "C" {
+
+extern void __gmon_start__ ( ) __attribute__(( weak ));
+
+extern void __gmon_start__ ( ) 
+{
+}
+
+}
+
+
+// Fix for apps, that use QPainter::eraseRect() which doesn't work with styles
+// that set a background pixmap (it would be easier to fix eraseRect(), but 
+// TT made it an inline ...)
+
+void QPEApplication::polish ( QWidget *w )
+{
+	qDebug ( "QPEApplication::polish()" );
+
+	for ( const color_fix_t *ptr = apps_that_need_special_colors; ptr-> m_app; ptr++ ) {
+		if (( ::strcmp ( Opie::binaryName ( ), ptr-> m_app ) == 0 ) &&
+		    ( ptr-> m_class ? w-> inherits ( ptr-> m_class ) : true ) &&
+		    ( ptr-> m_name ? ( ::strcmp ( w-> name ( ), ptr-> m_name ) == 0 ) : true )) {
+			QPalette pal = w-> palette ( );
+			pal. setColor ( ptr-> m_set, pal. color ( QPalette::Active, ptr-> m_get ));
+			w-> setPalette ( pal );
+		}
+	}
+	QApplication::polish ( w );
+}
+
+
+// Fix for the binary incompatibility that TT introduced in Qt/E 2.3.4 -- point sizes
+// were multiplied by 10 (which was incorrect)
+
+QValueList <int> QFontDatabase::pointSizes ( QString const &family, QString const &style, QString const &charset )
+{
+	qDebug ( "QFontDatabase::pointSizes()" );
+
+	QValueList <int> sl = pointSizes_NonWeak ( family, style, charset );
+
+	for ( const char * const *ptr = apps_that_need_pointsizes_times_10; *ptr; ptr++ ) {
+		if ( ::strcmp ( Opie::binaryName ( ), *ptr ) == 0 ) {
+			for ( QValueList <int>::Iterator it = sl. begin ( ); it != sl. end ( ); ++it ) 
+				*it *= 10;	
+		}
+	}
+	return sl;
+}
+
+
+// Various style/font/color related overrides for weak symbols in Qt/E,
+// which allows us to force the usage of the global Opie appearance.
+
+void QApplication::setStyle ( QStyle *style )
+{
+	qDebug ( "QApplication::setStyle()" );
+
+	if ( Opie::force_appearance & Opie::Force_Style )
+		delete style;
+	else
+		QApplication::setStyle_NonWeak ( style );
+}
+
+void QApplication::setPalette ( const QPalette &pal, bool informWidgets, const char *className )
+{
+	qDebug ( "QApplication::setPalette()" );
+
+	if (!( Opie::force_appearance & Opie::Force_Style ))
+		QApplication::setPalette_NonWeak ( pal, informWidgets, className );
+}
+
+void QApplication::setFont ( const QFont &fnt, bool informWidgets, const char *className )
+{
+	qDebug ( "QApplication::setFont()" );
+
+	if (!( Opie::force_appearance & Opie::Force_Font ))
+		QApplication::setFont_NonWeak ( fnt, informWidgets, className );
+}
+	
+
+void QApplication::qwsSetDecoration ( QWSDecoration *deco )
+{
+	qDebug ( "QApplication::qwsSetDecoration()" );
+
+	if ( Opie::force_appearance & Opie::Force_Decoration )
+		delete deco;
+	else
+		QApplication::qwsSetDecoration_NonWeak ( deco );
+}
+
diff --git a/library/qt_override_p.h b/library/qt_override_p.h
new file mode 100644
index 0000000..d11917c
--- a/dev/null
+++ b/library/qt_override_p.h
@@ -0,0 +1,21 @@
+#ifndef __QT_OVERRIDE_H__
+#define __QT_OVERRIDE_H__
+
+namespace Opie {
+	
+enum ForceAppearance {
+	Force_Style      = 0x01,
+	Force_Font       = 0x02,
+	Force_Decoration = 0x04,
+	
+	Force_All        = 0xff, 
+	Force_None       = 0x00,
+};
+
+extern const char *binaryName ( );
+
+extern int force_appearance;
+
+}
+
+#endif