fd close

2 files changed, 13 insertions, 6 deletions

diff --git a/noncore/net/wellenreiter/libwellenreiter/source/cardmode.cc b/noncore/net/wellenreiter/libwellenreiter/source/cardmode.cc
index 9e0a772..29dcc75 100644
--- a/noncore/net/wellenreiter/libwellenreiter/source/cardmode.cc
+++ b/noncore/net/wellenreiter/libwellenreiter/source/cardmode.cc
@@ -86,125 +86,131 @@ int card_into_monitormode (pcap_t **orighandle, char *device, int cardtype)
   else 
   {
     wl_loginfo("Interface set to rfmon mode");
   }
   return 1;
 }
 
 /* Check card is in the rfmon mode */
 int card_check_rfmon_datalink (char *device)
 {
   int datalinktype=0;
   pcap_t *phandle;
   phandle = pcap_open_live(device, 65,0,0,NULL);
   datalinktype = pcap_datalink (phandle);
   pcap_close(phandle);
 
   if (datalinktype != DLT_IEEE802_11) /* Rawmode is IEEE802_11 */
     {
         return 0;
     }
   else
   {
     wl_loginfo("Your successfully listen on %s in 802.11 raw mode", device);
     return 1; 
   }
 }
 
 /* Set card into promisc mode */
 int card_set_promisc_up (const char *device)
 {
     int err;
     /* First generate a socket to use with iocalls */
     int fd = socket(AF_INET, SOCK_DGRAM, 0);
     if (fd < 0)
     {
         /* In case of an error */
         perror("socket");
         return 0;
     }
 
     /* Fill an empty an interface structure with the right flags (UP and Promsic) */
     struct ifreq ifr;
     strncpy(ifr.ifr_name, device,10);
     ifr.ifr_flags = IFF_UP + IFF_PROMISC;
     err = ioctl(fd, SIOCSIFFLAGS, &ifr);
     if (err < 0)
     {
     	perror("Could not access the interface, ");
+    	close(fd);
         return 0;
     }
     
     /* Get the informations back from the interface to check if the flags are correct */
     strncpy(ifr.ifr_name, device,10);
     ioctl(fd, SIOCGIFFLAGS, &ifr);
     if (err < 0)
     {
         perror("Could not access the interface, ");
+    	close(fd);
         return 0;
     }
 
     if(ifr.ifr_flags && IFF_UP)
     {
-     printf("%s is ok\n", device);
-     return 1;
+    	close(fd);
+        return 1;
     }
     else
     {
-     printf("%s flags could not be set", device);
-     return 0;
+		wl_logerr("Could not set promisc flag on %d", device);
+		close(fd);
+        return 0;
     }
 }
 
 /* Set channel (Wireless frequency) of the device */
 int card_set_channel (const char *device, int channel, int cardtype)
 {
     if (cardtype == CARD_TYPE_CISCO)
     {
     	/* Cisco cards don't need channelswitching */
     	return 1;
     }
     /* If it is a lucent orinocco card */ 
     else if (cardtype == CARD_TYPE_ORINOCCO || cardtype == CARD_TYPE_HOSTAP)
     {
     	int fd;
    	//Wireless tools structure for the iocalls
    	struct iwreq ireq;  
    	int *ptr;
 	   /* Socket needed to use the iocall to */
 	   fd = socket(AF_INET, SOCK_STREAM, 0);
+
 	   if ( fd == -1 ) {
  	     return -1;
  	  }
 	   ptr = (int *) ireq.u.name;
 	   // This is the monitor mode for 802.11 non-prism header
 	   ptr[0] = 2;
 	   ptr[1] = channel;
 	   strcpy(ireq.ifr_ifrn.ifrn_name, device);
 	   if (ioctl( fd, SIOCIWFIRSTPRIV + 0x8, &ireq)==0)
 	   {
 		  /* All was fine... */
-		  // close(fd);
+		  close(fd);
   		wl_loginfo("Set channel %d on interface %s",channel, device);
 	       return 1;
 	   }
 	   else
-	   {   /* iocall does not work */
+	   {
+	   	   /* iocall does not work */
+			close(fd);
 			wl_logerr("Could not set channel %d on %s, check cardtype",channel, device);
 			return 0;
 	   }
     }
     else if (cardtype == CARD_TYPE_NG)
 	{
 		char wlanngcmd[62];
 		snprintf(wlanngcmd, sizeof(wlanngcmd) - 1, "$(which wlanctl-ng) %s lnxreq_wlansniff channel=%d enable=true", device, channel);
 		if (system(wlanngcmd) != 0)
 		{
 			wl_logerr("Could not set channel %d on %s, check cardtype",channel, device);
 			return 0;
 		}
 
 	}
     /* For undefined situations */
 	return 0;
 }
 
diff --git a/noncore/net/wellenreiter/libwellenreiter/source/cardmode.hh b/noncore/net/wellenreiter/libwellenreiter/source/cardmode.hh
index 242d8c5..4a95956 100644
--- a/noncore/net/wellenreiter/libwellenreiter/source/cardmode.hh
+++ b/noncore/net/wellenreiter/libwellenreiter/source/cardmode.hh
@@ -1,47 +1,48 @@
 /* $Id$ */
 
 #ifndef CARDMODE_HH
 #define CARDMODE_HH
 
 #include <string.h>
 #include <stdlib.h>
 #include <errno.h>
 #include <sys/types.h>
 #include <sys/time.h>
 #include <sys/socket.h>
 #include <netinet/in.h>
 #include <arpa/inet.h>
 #include <sys/ioctl.h>
+#include <unistd.h>
 #include <linux/if.h>
 #include <linux/wireless.h>
 
 #ifndef SIOCIWFIRSTPRIV
 #define SIOCIWFIRSTPRIV SIOCDEVPRIVATE
 #endif
 
 
 extern "C"
 {
 #include <net/bpf.h>
 #include <pcap.h>  
 }
 
 /* Defines, used for the card setup */
 #define   DEFAULT_PATH       "/proc/driver/aironet/%s/Config"
 #define   CISCO_STATUS       "/proc/driver/aironet/%s/Status"
 #define   CARD_TYPE_CISCO	 1
 #define   CARD_TYPE_NG	    2
 #define   CARD_TYPE_HOSTAP	3
 #define   CARD_TYPE_ORINOCCO  4
 
 /* only for now, until we have the daemon running */
 /*the config file should provide these information */
 #define   CARD_TYPE              CARD_TYPE_HOSTAP
 
 /* Prototypes */
 int card_check_rfmon_datalink (char *device);
 int card_into_monitormode (pcap_t **, char *, int);
 int card_set_promisc_up (const char *);
 int card_set_channel (const char *device, int channel,int cardtype); 
 
 #endif /* CARDMODE_HH */